Hi,
Attached is a patch to bttv which fixes the following problems.
Affected cards and problems:
~~~~~~~~~~~~~~~~~~~~~~~~
o VP-1020 (200103A) Tuning problems, device detection.
o VP-1020 (DST-MOT) Errors during tuning, device detection fails in a while.
o VP-1030 (DST-CI) Tuning sometimes fails after CI commands.
o VP-2031 (DCT-CI) Tuning problems
The timeout happens before the actual timeout occured in the MCU
on the board, and hence the problems.
Changes: (bttv-i2c.diff)
~~~~~~~~~~~~~~~~~~~~~~~~
o Changed the custom wait queue to wait_event_interruptible_timeout()
- Suggestion by Johannes Stezenbach.
o Fixed the wait queue timeout problem
- This fixes the timeout problem on various cards.
- This problem was visible as many
* Cannot tune to channels, when signal levels are very low.
* app_info does not work in some conditions for CI based cards
- Smaller values worked good for newer cards, but the older cards
suffered, settled down to the worst case values that could happen in any
eventuality.
Signed-off-by: Manu Abraham <[email protected]>
Index: linux-2.6.12-rc3/drivers/media/video/bttv-i2c.c
========================================
--- linux-2.6.12-rc3.orig/drivers/media/video/bttv-i2c.c 2005-05-03
16:04:28.000000000 +0400
+++ linux-2.6.12-rc3/drivers/media/video/bttv-i2c.c 2005-05-05
00:01:00.000000000 +0400
@@ -29,6 +29,7 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
#include "bttvp.h"
@@ -130,17 +131,14 @@ static u32 functionality(struct i2c_adap
static int
bttv_i2c_wait_done(struct bttv *btv)
{
- DECLARE_WAITQUEUE(wait, current);
int rc = 0;
- add_wait_queue(&btv->i2c_queue, &wait);
- if (0 == btv->i2c_done)
- msleep_interruptible(20);
- remove_wait_queue(&btv->i2c_queue, &wait);
-
- if (0 == btv->i2c_done)
- /* timeout */
- rc = -EIO;
+ /* timeout */
+ if (wait_event_interruptible_timeout(btv->i2c_queue,
+ btv->i2c_done, msecs_to_jiffies(85)) == -ERESTARTSYS)
+
+ rc = -EIO;
+
if (btv->i2c_done & BT848_INT_RACK)
rc = 1;
btv->i2c_done = 0;
Manu Abraham <[email protected]> wrote:
>
> User-Agent: Mozilla Thunderbird 1.0.2 (X11/20050317)
>
uh-oh.
>
> Attached is a patch to bttv which fixes the following problems.
Mozilla space-stuffed it. Please resend as an attachment.
Andrew Morton wrote:
> Manu Abraham <[email protected]> wrote:
>
>>User-Agent: Mozilla Thunderbird 1.0.2 (X11/20050317)
>>
>
>
> uh-oh.
>
>
>>Attached is a patch to bttv which fixes the following problems.
>
>
> Mozilla space-stuffed it. Please resend as an attachment.
>
>
>
Oh, i am sorry, resending it ..
Attached is a patch to bttv which fixes the following problems.
Affected cards and problems:
~~~~~~~~~~~~~~~~~~~~~~~~
o VP-1020 (200103A) Tuning problems, device detection.
o VP-1020 (DST-MOT) Errors during tuning, device detection fails in a while.
o VP-1030 (DST-CI) Tuning sometimes fails after CI commands.
o VP-2031 (DCT-CI) Tuning problems
The timeout happens before the actual timeout occured in the MCU
on the board, and hence the problems.
Changes: (bttv-i2c.diff)
~~~~~~~~~~~~~~~~~~~~~~~~
o Changed the custom wait queue to wait_event_interruptible_timeout()
- Suggestion by Johannes Stezenbach.
o Fixed the wait queue timeout problem
- This fixes the timeout problem on various cards.
- This problem was visible as many
* Cannot tune to channels, when signal levels are very low.
* app_info does not work in some conditions for CI based cards
- Smaller values worked good for newer cards, but the older cards
suffered, settled down to the worst case values that could happen in any
eventuality.
Signed-off-by: Manu Abraham <[email protected]>
On Thu, 05 May 2005 01:27:34 +0400
Manu Abraham <[email protected]> wrote:
>
> Oh, i am sorry, resending it ..
>
>
> Attached is a patch to bttv which fixes the following problems.
Has 2 instances of trailing whitespace added (one space, one tab).
You can check for that with one of several available scripts
or with several editors...
---
~Randy
Randy.Dunlap wrote:
> On Thu, 05 May 2005 01:27:34 +0400
> Manu Abraham <[email protected]> wrote:
>
>
>>Oh, i am sorry, resending it ..
>>
>>
>>Attached is a patch to bttv which fixes the following problems.
>
>
>
> Has 2 instances of trailing whitespace added (one space, one tab).
>
> You can check for that with one of several available scripts
> or with several editors...
>
Should i cleanup and send again ?
Manu