Hello,
I have an adapter usb to psx i have tried it with 2.6.9 and it works
perfectly with the kernel driver.
with 2.6.12 i cant get it to work and with 2.6.13-rc3 i havent seen any
option to enable it.
could anybody help me?
Greets and thanks
c. litters
On 9/8/05, Christoph Litters <[email protected]> wrote:
> Hello,
>
> I have an adapter usb to psx i have tried it with 2.6.9 and it works
> perfectly with the kernel driver.
> with 2.6.12 i cant get it to work and with 2.6.13-rc3 i havent seen any
> option to enable it.
> could anybody help me?
>
Device Drivers ---> Input device support ---> Joysticks --->
Multisystem, NES, SNES, N64, PSX joysticks and gamepads
Needs parport support.
--
Dmitry
09/08/2005 04:38 PM, Dmitry Torokhov wrote/a écrit:
> On 9/8/05, Christoph Litters <[email protected]> wrote:
>
>>Hello,
>>
>>I have an adapter usb to psx i have tried it with 2.6.9 and it works
>>perfectly with the kernel driver.
>>with 2.6.12 i cant get it to work and with 2.6.13-rc3 i havent seen any
>>option to enable it.
>>could anybody help me?
>>
>
>
> Device Drivers ---> Input device support ---> Joysticks --->
> Multisystem, NES, SNES, N64, PSX joysticks and gamepads
>
> Needs parport support.
>
Are you sure? Isn't this only for parallel to psx adapters? Christoph
says he has a "usb to psx" adapter.
Eric
On 9/8/05, Eric Piel <[email protected]> wrote:
> 09/08/2005 04:38 PM, Dmitry Torokhov wrote/a ?crit:
> > On 9/8/05, Christoph Litters <[email protected]> wrote:
> >
> >>Hello,
> >>
> >>I have an adapter usb to psx i have tried it with 2.6.9 and it works
> >>perfectly with the kernel driver.
> >>with 2.6.12 i cant get it to work and with 2.6.13-rc3 i havent seen any
> >>option to enable it.
> >>could anybody help me?
> >>
> >
> >
> > Device Drivers ---> Input device support ---> Joysticks --->
> > Multisystem, NES, SNES, N64, PSX joysticks and gamepads
> >
> > Needs parport support.
> >
>
> Are you sure? Isn't this only for parallel to psx adapters? Christoph
> says he has a "usb to psx" adapter.
>
Oh, yes, sorry. In that case wouldn't HID driver handle it?
--
Dmitry
Dmitry Torokhov wrote:
>On 9/8/05, Eric Piel <[email protected]> wrote:
>
>
>>09/08/2005 04:38 PM, Dmitry Torokhov wrote/a ?crit:
>>
>>
>>>On 9/8/05, Christoph Litters <[email protected]> wrote:
>>>
>>>
>>>
>>>>Hello,
>>>>
>>>>I have an adapter usb to psx i have tried it with 2.6.9 and it works
>>>>perfectly with the kernel driver.
>>>>with 2.6.12 i cant get it to work and with 2.6.13-rc3 i havent seen any
>>>>option to enable it.
>>>>could anybody help me?
>>>>
>>>>
>>>>
>>>Device Drivers ---> Input device support ---> Joysticks --->
>>>Multisystem, NES, SNES, N64, PSX joysticks and gamepads
>>>
>>>Needs parport support.
>>>
>>>
>>>
>>Are you sure? Isn't this only for parallel to psx adapters? Christoph
>>says he has a "usb to psx" adapter.
>>
>>
>>
>
>Oh, yes, sorry. In that case wouldn't HID driver handle it?
>
>
>
I have such a device myself (send me an email in private if you want to
confirm it is the same model et al). The HID driver worked just fine. I
also found that there was almost zero information about this on the net.
I just use USB, USB HID, USB HID input support, Input support, and the
Input joystick interface driver. Works just fine, check it with the
joystick calibrator program of your choice. If your PSX -> USB converter
doesn't support the joystick HID (which most seem to do) you may need a
driver of some kind. Or better yet go buy one that does support it, you
should be able to pick one up for less than $20 USD.
Matt