Those files live in include/scsi/sas/ and were missed in the
previous patchset:
sas.h
sas_class.h
sas_discover.h
sas_expander.h
sas_frames.h
sas_frames_be.h
sas_frames_le.h
sas_task.h
Signed-off-by: Luben Tuikov <[email protected]>
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas.h linux-2.6.13/include/scsi/sas/sas.h
--- linux-2.6.13-orig/include/scsi/sas/sas.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,164 @@
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * $Id: //depot/sas-class/sas.h#23 $
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE 8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) (be64_to_cpu(*(__be64 *)(_sa)))
+
+enum sas_oob_mode {
+ OOB_NOT_CONNECTED,
+ SATA_OOB_MODE,
+ SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these.
+ */
+enum sas_dev_type {
+ NO_DEVICE = 0, /* protocol */
+ SAS_END_DEV = 1, /* protocol */
+ EDGE_DEV = 2, /* protocol */
+ FANOUT_DEV = 3, /* protocol */
+ SAS_HA = 4,
+ SATA_DEV = 5,
+ SATA_PM = 7,
+ SATA_PM_PORT= 8,
+};
+
+enum sas_phy_linkrate {
+ PHY_LINKRATE_NONE = 0,
+ PHY_LINKRATE_UNKNOWN = 0,
+ PHY_DISABLED,
+ PHY_RESET_PROBLEM,
+ PHY_SPINUP_HOLD,
+ PHY_PORT_SELECTOR,
+ PHY_LINKRATE_1_5 = 0x08,
+ PHY_LINKRATE_G1 = PHY_LINKRATE_1_5,
+ PHY_LINKRATE_3 = 0x09,
+ PHY_LINKRATE_G2 = PHY_LINKRATE_3,
+ PHY_LINKRATE_6 = 0x0A,
+};
+
+/* Partly from IDENTIFY address frame. */
+enum sas_proto {
+ SATA_PROTO = 1,
+ SAS_PROTO_SMP = 2, /* protocol */
+ SAS_PROTO_STP = 4, /* protocol */
+ SAS_PROTO_SSP = 8, /* protocol */
+ SAS_PROTO_ALL = 0xE,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+ PHY_FUNC_NOP,
+ PHY_FUNC_LINK_RESET, /* Enables the phy */
+ PHY_FUNC_HARD_RESET,
+ PHY_FUNC_DISABLE,
+ PHY_FUNC_CLEAR_ERROR_LOG = 5,
+ PHY_FUNC_CLEAR_AFFIL,
+ PHY_FUNC_TX_SATA_PS_SIGNAL,
+ PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+};
+
+#include <scsi/sas/sas_frames.h>
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+ SAS_PRIM_AIP_NORMAL = 1,
+ SAS_PRIM_AIP_R0 = 2,
+ SAS_PRIM_AIP_R1 = 3,
+ SAS_PRIM_AIP_R2 = 4,
+ SAS_PRIM_AIP_WC = 5,
+ SAS_PRIM_AIP_WD = 6,
+ SAS_PRIM_AIP_WP = 7,
+ SAS_PRIM_AIP_RWP = 8,
+
+ SAS_PRIM_BC_CH = 9,
+ SAS_PRIM_BC_RCH0 = 10,
+ SAS_PRIM_BC_RCH1 = 11,
+ SAS_PRIM_BC_R0 = 12,
+ SAS_PRIM_BC_R1 = 13,
+ SAS_PRIM_BC_R2 = 14,
+ SAS_PRIM_BC_R3 = 15,
+ SAS_PRIM_BC_R4 = 16,
+
+ SAS_PRIM_NOTIFY_ENSP= 17,
+ SAS_PRIM_NOTIFY_R0 = 18,
+ SAS_PRIM_NOTIFY_R1 = 19,
+ SAS_PRIM_NOTIFY_R2 = 20,
+
+ SAS_PRIM_CLOSE_CLAF = 21,
+ SAS_PRIM_CLOSE_NORM = 22,
+ SAS_PRIM_CLOSE_R0 = 23,
+ SAS_PRIM_CLOSE_R1 = 24,
+
+ SAS_PRIM_OPEN_RTRY = 25,
+ SAS_PRIM_OPEN_RJCT = 26,
+ SAS_PRIM_OPEN_ACPT = 27,
+
+ SAS_PRIM_DONE = 28,
+ SAS_PRIM_BREAK = 29,
+
+ SATA_PRIM_DMAT = 33,
+ SATA_PRIM_PMNAK = 34,
+ SATA_PRIM_PMACK = 35,
+ SATA_PRIM_PMREQ_S = 36,
+ SATA_PRIM_PMREQ_P = 37,
+ SATA_SATA_R_ERR = 38,
+};
+
+enum sas_open_rej_reason {
+ /* Abandon open */
+ SAS_OREJ_UNKNOWN = 0,
+ SAS_OREJ_BAD_DEST = 1,
+ SAS_OREJ_CONN_RATE = 2,
+ SAS_OREJ_EPROTO = 3,
+ SAS_OREJ_RESV_AB0 = 4,
+ SAS_OREJ_RESV_AB1 = 5,
+ SAS_OREJ_RESV_AB2 = 6,
+ SAS_OREJ_RESV_AB3 = 7,
+ SAS_OREJ_WRONG_DEST= 8,
+ SAS_OREJ_STP_NORES = 9,
+
+ /* Retry open */
+ SAS_OREJ_NO_DEST = 10,
+ SAS_OREJ_PATH_BLOCKED = 11,
+ SAS_OREJ_RSVD_CONT0 = 12,
+ SAS_OREJ_RSVD_CONT1 = 13,
+ SAS_OREJ_RSVD_INIT0 = 14,
+ SAS_OREJ_RSVD_INIT1 = 15,
+ SAS_OREJ_RSVD_STOP0 = 16,
+ SAS_OREJ_RSVD_STOP1 = 17,
+ SAS_OREJ_RSVD_RETRY = 18,
+};
+#endif /* _SAS_H_ */
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas_class.h linux-2.6.13/include/scsi/sas/sas_class.h
--- linux-2.6.13-orig/include/scsi/sas/sas_class.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas_class.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,300 @@
+/*
+ * Serial Attached SCSI (SAS) class header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * $Id: //depot/sas-class/sas_class.h#65 $
+ */
+
+#ifndef _SAS_CLASS_H_
+#define _SAS_CLASS_H_
+
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <asm/semaphore.h>
+#include <scsi/sas/sas.h>
+
+enum sas_class {
+ SAS,
+ EXPANDER
+};
+
+enum sas_phy_role {
+ PHY_ROLE_NONE = 0,
+ PHY_ROLE_TARGET = 0x40,
+ PHY_ROLE_INITIATOR = 0x80,
+};
+
+enum sas_phy_type {
+ PHY_TYPE_PHYSICAL,
+ PHY_TYPE_VIRTUAL
+};
+
+/* The events are mnemonically described in sas_dump.c
+ * so when updating/adding events here, please also
+ * update the other file too.
+ */
+enum ha_event {
+ HAE_RESET = 0U,
+};
+#define HA_NUM_EVENTS 1
+
+enum port_event {
+ PORTE_BYTES_DMAED = 0U,
+ PORTE_BROADCAST_RCVD = 1,
+ PORTE_LINK_RESET_ERR = 2,
+ PORTE_TIMER_EVENT = 3,
+ PORTE_HARD_RESET = 4,
+};
+#define PORT_NUM_EVENTS 5
+
+enum phy_event {
+ PHYE_LOSS_OF_SIGNAL = 0U,
+ PHYE_OOB_DONE = 1,
+ PHYE_OOB_ERROR = 2,
+ PHYE_SPINUP_HOLD = 3, /* hot plug SATA, no COMWAKE sent */
+};
+#define PHY_NUM_EVENTS 4
+
+enum discover_event {
+ DISCE_DISCOVER_DOMAIN = 0U,
+ DISCE_REVALIDATE_DOMAIN = 1,
+ DISCE_PORT_GONE = 2,
+};
+#define DISC_NUM_EVENTS 3
+
+struct sas_event {
+ int event;
+ struct list_head el;
+};
+
+/* The phy pretty much is controlled by the LLDD.
+ * The class only reads those fields.
+ */
+struct sas_phy {
+/* private: */
+ struct kobject phy_kobj;
+
+ /* protected by ha->event_lock */
+ struct list_head port_event_list;
+ struct list_head phy_event_list;
+ struct sas_event port_events[PORT_NUM_EVENTS];
+ struct sas_event phy_events[PHY_NUM_EVENTS];
+
+ int error;
+
+/* public: */
+ /* The following are class:RO, driver:R/W */
+ int enabled; /* must be set */
+
+ int id; /* must be set */
+ enum sas_class class;
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ enum sas_phy_type type;
+ enum sas_phy_role role;
+ enum sas_oob_mode oob_mode;
+ enum sas_phy_linkrate linkrate;
+
+ u8 *sas_addr; /* must be set */
+ u8 attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
+
+ spinlock_t frame_rcvd_lock;
+ u8 *frame_rcvd; /* must be set */
+ int frame_rcvd_size;
+
+ spinlock_t sas_prim_lock;
+ u32 sas_prim;
+
+ struct list_head port_phy_el; /* driver:RO */
+ struct sas_port *port; /* Class:RW, driver: RO */
+
+ struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
+
+ void *lldd_phy; /* not touched by the sas_class_code */
+};
+
+struct sas_port;
+
+struct sas_discovery {
+ spinlock_t disc_event_lock;
+ int disc_thread_quit;
+ struct list_head disc_event_list;
+ struct sas_event disc_events[DISC_NUM_EVENTS];
+ struct task_struct *disc_thread;
+ struct semaphore disc_sema;
+
+ u8 fanout_sas_addr[8];
+ u8 eeds_a[8];
+ u8 eeds_b[8];
+ int max_level;
+};
+
+struct scsi_id_map {
+ int max_ids;
+ spinlock_t id_bitmap_lock;
+ int id_bitmap_size;
+ void *id_bitmap;
+};
+
+struct domain_device;
+
+/* The port struct is Class:RW, driver:RO */
+struct sas_port {
+/* private: */
+ struct kobject port_kobj;
+ struct kset phy_kset;
+ struct kset dev_kset;
+
+ struct completion port_gone_completion;
+
+ struct sas_discovery disc;
+ struct domain_device *port_dev;
+ struct list_head dev_list;
+ enum sas_phy_linkrate linkrate;
+
+ struct scsi_id_map id_map;
+
+/* public: */
+ int id;
+
+ enum sas_class class;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ enum sas_oob_mode oob_mode;
+
+ spinlock_t phy_list_lock;
+ struct list_head phy_list;
+ int num_phys;
+ u32 phy_mask;
+
+ struct sas_ha_struct *ha;
+
+ void *lldd_port; /* not touched by the sas class code */
+};
+
+struct sas_task;
+
+struct scsi_core {
+ struct kobject scsi_core_obj;
+
+ struct scsi_host_template *sht;
+ struct Scsi_Host *shost;
+
+ spinlock_t task_queue_lock;
+ struct list_head task_queue;
+ int task_queue_size;
+
+ struct semaphore queue_thread_sema;
+ int queue_thread_kill;
+};
+
+struct sas_ha_struct {
+/* private: */
+ struct kset ha_kset; /* "this" */
+ struct kset phy_kset;
+ struct kset port_kset;
+
+ struct semaphore event_sema;
+ int event_thread_kill;
+
+ spinlock_t event_lock;
+ struct list_head ha_event_list;
+ struct sas_event ha_events[HA_NUM_EVENTS];
+ u32 porte_mask; /* mask of phys for port events */
+ u32 phye_mask; /* mask of phys for phy events */
+
+ struct scsi_core core;
+
+/* public: */
+ char *sas_ha_name;
+ struct pci_dev *pcidev; /* should be set */
+ struct module *lldd_module; /* should be set */
+
+ u8 *sas_addr; /* must be set */
+ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+ spinlock_t phy_port_lock;
+ struct sas_phy **sas_phy; /* array of valid pointers, must be set */
+ struct sas_port **sas_port; /* array of valid pointers, must be set */
+ int num_phys; /* must be set, gt 0, static */
+
+ /* LLDD calls these to notify the class of an event. */
+ void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+ void (*notify_port_event)(struct sas_phy *, enum port_event);
+ void (*notify_phy_event)(struct sas_phy *, enum phy_event);
+
+ /* The class calls these to notify the LLDD of an event. */
+ void (*lldd_port_formed)(struct sas_phy *);
+ void (*lldd_port_deformed)(struct sas_phy *);
+
+ /* The class calls these when a device is found or gone. */
+ int (*lldd_dev_found)(struct domain_device *);
+ void (*lldd_dev_gone)(struct domain_device *);
+
+ /* The class calls this to send a task for execution. */
+ int lldd_max_execute_num;
+ int lldd_queue_size;
+ int (*lldd_execute_task)(struct sas_task *, int num,
+ unsigned long gfp_flags);
+
+ /* Task Management Functions. Must be called from process context. */
+ int (*lldd_abort_task)(struct sas_task *);
+ int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_I_T_nexus_reset)(struct domain_device *);
+ int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+ int (*lldd_query_task)(struct sas_task *);
+
+ /* Port and Adapter management */
+ int (*lldd_clear_nexus_port)(struct sas_port *);
+ int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+ /* Phy management */
+ int (*lldd_control_phy)(struct sas_phy *, enum phy_func);
+
+ void *lldd_ha; /* not touched by sas class code */
+};
+
+#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
+
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
+
+/* Before calling a notify event, LLDD should use this function
+ * when the link is severed (possibly from its tasklet).
+ * The idea is that the Class only reads those, while the LLDD,
+ * can R/W these (thus avoiding a race).
+ */
+static inline void sas_phy_disconnected(struct sas_phy *phy)
+{
+ phy->oob_mode = OOB_NOT_CONNECTED;
+ phy->linkrate = PHY_LINKRATE_NONE;
+}
+
+int sas_register_ha(struct sas_ha_struct *sas_ha);
+int sas_unregister_ha(struct sas_ha_struct *sas_ha);
+
+#endif /* _SAS_CLASS_H_ */
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas_discover.h linux-2.6.13/include/scsi/sas/sas_discover.h
--- linux-2.6.13-orig/include/scsi/sas/sas_discover.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas_discover.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,231 @@
+/*
+ * Serial Attached SCSI (SAS) Discover process header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/sas-class/sas_discover.h#40 $
+ */
+
+#ifndef _SAS_DISCOVER_H_
+#define _SAS_DISCOVER_H_
+
+#include <scsi/sas/sas_class.h>
+#include <scsi/sas/sas_frames.h>
+
+/* ---------- SMP ---------- */
+
+#define SMP_REPORT_GENERAL 0x00
+#define SMP_REPORT_MANUF_INFO 0x01
+#define SMP_READ_GPIO_REG 0x02
+#define SMP_DISCOVER 0x10
+#define SMP_REPORT_PHY_ERR_LOG 0x11
+#define SMP_REPORT_PHY_SATA 0x12
+#define SMP_REPORT_ROUTE_INFO 0x13
+#define SMP_WRITE_GPIO_REG 0x82
+#define SMP_CONF_ROUTE_INFO 0x90
+#define SMP_PHY_CONTROL 0x91
+#define SMP_PHY_TEST_FUNCTION 0x92
+
+#define SMP_RESP_FUNC_ACC 0x00
+#define SMP_RESP_FUNC_UNK 0x01
+#define SMP_RESP_FUNC_FAILED 0x02
+#define SMP_RESP_INV_FRM_LEN 0x03
+#define SMP_RESP_NO_PHY 0x10
+#define SMP_RESP_NO_INDEX 0x11
+#define SMP_RESP_PHY_NO_SATA 0x12
+#define SMP_RESP_PHY_UNK_OP 0x13
+#define SMP_RESP_PHY_UNK_TESTF 0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT 0x16
+
+/* ---------- Domain Devices ---------- */
+
+/* See sas_discover.c before changing these.
+ */
+
+/* ---------- SATA device ---------- */
+
+enum ata_command_set {
+ ATA_COMMAND_SET = 0,
+ ATAPI_COMMAND_SET = 1,
+};
+
+struct domain_device;
+
+struct sata_device {
+ struct kset pm_port_kset;
+ enum ata_command_set command_set;
+ struct smp_resp rps_resp; /* report_phy_sata_resp */
+ __le16 *identify_device;
+ __le16 *identify_packet_device;
+
+ u8 port_no; /* port number, if this is a PM (Port) */
+ struct list_head children; /* PM Ports if this is a PM */
+};
+
+/* ---------- SAS end device ---------- */
+
+#define SAS_INQUIRY_DATA_LEN 36
+
+struct scsi_core_mapping {
+ int channel;
+ int id;
+};
+
+enum task_management_type {
+ TASK_MANAGEMENT_NONE = 0,
+ TASK_MANAGEMENT_FULL = 1,
+ TASK_MANAGEMENT_BASIC = 2,
+};
+
+struct LU {
+ struct kobject lu_obj;
+ struct list_head list;
+
+ struct domain_device *parent;
+
+ u8 LUN[8];
+ int inquiry_valid_data_len;
+ u8 inquiry_data[SAS_INQUIRY_DATA_LEN];
+ struct scsi_core_mapping map;
+
+ enum task_management_type tm_type;
+
+ void *uldd_dev;
+};
+
+struct end_device {
+ u8 ms_10:1;
+ u8 ready_led_meaning:1;
+ u8 rl_wlun:1;
+ u16 itnl_timeout; /* 0 if you do not know it */
+ u16 iresp_timeout;
+
+ struct kset LU_kset;
+ struct list_head LU_list;
+};
+
+#include <scsi/sas/sas_expander.h>
+
+/* ---------- Domain device ---------- */
+
+struct domain_device {
+ struct kobject dev_obj;
+ enum sas_dev_type dev_type;
+
+ enum sas_phy_linkrate linkrate;
+ enum sas_phy_linkrate min_linkrate;
+ enum sas_phy_linkrate max_linkrate;
+
+ int pathways;
+
+ struct domain_device *parent;
+ struct list_head siblings; /* devices on the same level */
+ struct sas_port *port; /* shortcut to root of the tree */
+
+ struct list_head dev_list_node;
+
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+ u8 frame_rcvd[32];
+
+ union {
+ struct expander_device ex_dev;
+ struct end_device end_dev;
+ struct sata_device sata_dev; /* STP & directly attached */
+ };
+
+ void *lldd_dev;
+};
+
+#define list_for_each_entry_reverse_safe(pos, n, head, member) \
+ for (pos = list_entry((head)->prev, typeof(*pos), member), \
+ n = list_entry(pos->member.prev, typeof(*pos), member); \
+ &pos->member != (head); \
+ pos = n, n = list_entry(n->member.prev, typeof(*n), member))
+
+
+static inline int sas_notify_lldd_dev_found(struct domain_device *dev)
+{
+ int res = 0;
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+
+ if (!try_module_get(sas_ha->lldd_module))
+ return -ENOMEM;
+ if (sas_ha->lldd_dev_found) {
+ res = sas_ha->lldd_dev_found(dev);
+ if (res) {
+ printk("sas: driver on pcidev %s cannot handle "
+ "device %llx, error:%d\n",
+ pci_name(sas_ha->pcidev),
+ SAS_ADDR(dev->sas_addr), res);
+ }
+ }
+ return res;
+}
+
+static inline void sas_notify_lldd_dev_gone(struct domain_device *dev)
+{
+ if (dev->port->ha->lldd_dev_gone)
+ dev->port->ha->lldd_dev_gone(dev);
+ module_put(dev->port->ha->lldd_module);
+}
+
+static inline void sas_init_dev(struct domain_device *dev)
+{
+ INIT_LIST_HEAD(&dev->siblings);
+ INIT_LIST_HEAD(&dev->dev_list_node);
+ switch (dev->dev_type) {
+ case SAS_END_DEV:
+ INIT_LIST_HEAD(&dev->end_dev.LU_list);
+ break;
+ case EDGE_DEV:
+ case FANOUT_DEV:
+ INIT_LIST_HEAD(&dev->ex_dev.children);
+ break;
+ case SATA_DEV:
+ case SATA_PM:
+ case SATA_PM_PORT:
+ INIT_LIST_HEAD(&dev->sata_dev.children);
+ break;
+ default:
+ break;
+ }
+}
+
+void sas_init_disc(struct sas_discovery *disc, struct sas_port *port);
+void sas_kill_disc_thread(struct sas_port *port);
+int sas_discover_event(struct sas_port *sas_port, enum discover_event ev);
+
+int sas_discover_sata(struct domain_device *dev);
+int sas_discover_end_dev(struct domain_device *dev);
+
+void sas_unregister_dev(struct domain_device *dev);
+
+int sas_register_with_scsi(struct LU *lu);
+void sas_unregister_with_scsi(struct LU *lu);
+
+void sas_unregister_devices(struct sas_ha_struct *sas_ha);
+
+#endif /* _SAS_DISCOVER_H_ */
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas_dump.h linux-2.6.13/include/scsi/sas/sas_dump.h
--- linux-2.6.13-orig/include/scsi/sas/sas_dump.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas_dump.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,43 @@
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/sas-class/sas_dump.h#2 $
+ */
+
+#include "sas_internal.h"
+
+#ifdef SAS_DEBUG
+
+void sas_dprint_porte(int phyid, enum port_event pe);
+void sas_dprint_phye(int phyid, enum phy_event pe);
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he);
+void sas_dump_port(struct sas_port *port);
+
+#else /* SAS_DEBUG */
+
+static inline void sas_dprint_porte(int phyid, enum port_event pe) { }
+static inline void sas_dprint_phye(int phyid, enum phy_event pe) { }
+static inline void sas_dprint_hae(struct sas_ha_struct *sas_ha,
+ enum ha_event he) { }
+static inline void sas_dump_port(struct sas_port *port) { }
+
+#endif /* SAS_DEBUG */
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas_expander.h linux-2.6.13/include/scsi/sas/sas_expander.h
--- linux-2.6.13-orig/include/scsi/sas/sas_expander.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas_expander.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,133 @@
+/*
+ * Serial Attached SCSI (SAS) Expander discovery and configuration
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/sas-class/sas_expander.h#18 $
+ */
+
+#ifndef _SAS_EXPANDER_H_
+#define _SAS_EXPANDER_H_
+
+#define ETASK 0xFA
+
+#define to_lu_device(_obj) container_of(_obj, struct LU, lu_obj)
+#define to_lu_attr(_attr) container_of(_attr, struct lu_dev_attribute, attr)
+#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
+#define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\
+ attr)
+
+/* ---------- Expander device ---------- */
+
+enum routing_attribute {
+ DIRECT_ROUTING,
+ SUBTRACTIVE_ROUTING,
+ TABLE_ROUTING,
+};
+
+enum ex_phy_state {
+ PHY_EMPTY,
+ PHY_VACANT,
+ PHY_NOT_PRESENT,
+ PHY_DEVICE_DISCOVERED
+};
+
+struct ex_phy {
+ int phy_id;
+
+ enum ex_phy_state phy_state;
+
+ enum sas_dev_type attached_dev_type;
+ enum sas_phy_linkrate linkrate;
+
+ u8 attached_sata_host:1;
+ u8 attached_sata_dev:1;
+ u8 attached_sata_ps:1;
+
+ enum sas_proto attached_tproto;
+ enum sas_proto attached_iproto;
+
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ u8 attached_phy_id;
+
+ u8 phy_change_count;
+ enum routing_attribute routing_attr;
+ u8 virtual:1;
+
+ int last_da_index;
+};
+
+struct expander_device {
+ struct list_head children;
+
+ int level;
+
+ u16 ex_change_count;
+ u16 max_route_indexes;
+ u8 num_phys;
+ u8 configuring:1;
+ u8 conf_route_table:1;
+ u8 enclosure_logical_id[8];
+
+ char vendor_id[8+1];
+ char product_id[16+1];
+ char product_rev[4+1];
+ char component_vendor_id[8+1];
+ u16 component_id;
+ u8 component_revision_id;
+
+ struct ex_phy *ex_phy;
+
+ struct bin_attribute smp_bin_attr;
+ void *smp_req;
+ int smp_req_size;
+ int smp_portal_pid;
+ struct semaphore smp_sema;
+};
+
+/* ---------- Attributes and inlined ---------- */
+
+struct domain_dev_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct domain_device *dev, char *);
+ ssize_t (*store)(struct domain_device *dev, const char *, size_t);
+};
+
+void sas_kobj_set(struct domain_device *dev);
+
+extern struct kobj_type ex_dev_ktype;
+extern struct sysfs_ops dev_sysfs_ops;
+
+ssize_t dev_show_type(struct domain_device *dev, char *page);
+ssize_t dev_show_iproto(struct domain_device *dev, char *page);
+ssize_t dev_show_tproto(struct domain_device *dev, char *page);
+ssize_t dev_show_sas_addr(struct domain_device *dev, char *page);
+ssize_t dev_show_linkrate(struct domain_device *dev, char *page);
+ssize_t dev_show_min_linkrate(struct domain_device *dev, char *page);
+ssize_t dev_show_max_linkrate(struct domain_device *dev, char *page);
+ssize_t dev_show_pathways(struct domain_device *dev, char *page);
+
+int sas_discover_root_expander(struct domain_device *dev);
+
+void sas_init_ex_attr(void);
+
+int sas_ex_revalidate_domain(struct domain_device *port_dev);
+
+#endif /* _SAS_EXPANDER_H_ */
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas_frames.h linux-2.6.13/include/scsi/sas/sas_frames.h
--- linux-2.6.13-orig/include/scsi/sas/sas_frames.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas_frames.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,97 @@
+/*
+ * SAS Frames
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * $Id: //depot/sas-class/sas_frames.h#4 $
+ */
+
+#ifndef _SAS_FRAMES_
+#define _SAS_FRAMES_
+
+#define SMP_REQUEST 0x40
+#define SMP_RESPONSE 0x41
+
+#define SSP_DATA 0x01
+#define SSP_XFER_RDY 0x05
+#define SSP_COMMAND 0x06
+#define SSP_RESPONSE 0x07
+#define SSP_TASK 0x16
+
+struct dev_to_host_fis {
+ u8 fis_type; /* 0x34 */
+ u8 flags;
+ u8 status;
+ u8 error;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 _r_a;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_b;
+ u8 _r_c;
+
+ u32 _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+ u8 fis_type; /* 0x27 */
+ u8 flags;
+ u8 command;
+ u8 features;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 features_exp;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_a;
+ u8 control;
+
+ u32 _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+#include <scsi/sas/sas_frames_le.h>
+#elif defined(__BIG_ENDIAN_BITFIELD)
+#include <scsi/sas/sas_frames_be.h>
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_FRAMES_ */
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas_frames_be.h linux-2.6.13/include/scsi/sas/sas_frames_be.h
--- linux-2.6.13-orig/include/scsi/sas/sas_frames_be.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas_frames_be.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,222 @@
+/*
+ * SAS Frames Big endian bitfield order
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * $Id: //depot/sas-class/sas_frames_be.h#9 $
+ */
+
+#ifndef _SAS_FRAMES_BE_H_
+#define _SAS_FRAMES_BE_H_
+
+#ifndef __BIG_ENDIAN_BITFIELD
+#error "Wrong header file included!"
+#endif
+
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 _un0:1;
+ u8 dev_type:3;
+ u8 frame_type:4;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un247:4;
+ u8 ssp_iport:1;
+ u8 stp_iport:1;
+ u8 smp_iport:1;
+ u8 _un20:1;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un347:4;
+ u8 ssp_tport:1;
+ u8 stp_tport:1;
+ u8 smp_tport:1;
+ u8 _un30:1;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 _r_c:5;
+ u8 retry_data_frames:1;
+ u8 retransmit:1;
+ u8 changing_data_ptr:1;
+
+ u8 _r_d:6;
+ u8 num_fill_bytes:2;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptg;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 _r_b:6;
+ u8 datapres:2;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 _r_b:6;
+ u8 configuring:1;
+ u8 conf_route_table:1;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_d:1;
+ u8 attached_dev_type:3;
+ u8 _r_c:4;
+
+ u8 _r_e:4;
+ u8 linkrate:4;
+
+ u8 _r_f:4;
+ u8 iproto:3;
+ u8 attached_sata_host:1;
+
+ u8 attached_sata_ps:1;
+ u8 _r_g:3;
+ u8 tproto:3;
+ u8 attached_sata_dev:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 pmin_linkrate:4;
+ u8 hmin_linkrate:4;
+ u8 pmax_linkrate:4;
+ u8 hmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 virtual:1;
+ u8 _r_i:3;
+ u8 pptv:4;
+
+ u8 _r_j:4;
+ u8 routing_attr:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 _r_c:6;
+ u8 affil_supp:1;
+ u8 affil_valid:1;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 smp_frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#endif /* _SAS_FRAMES_BE_H_ */
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas_frames_le.h linux-2.6.13/include/scsi/sas/sas_frames_le.h
--- linux-2.6.13-orig/include/scsi/sas/sas_frames_le.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas_frames_le.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,223 @@
+/*
+ * SAS Frames Little endian bitfield order
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * $Id: //depot/sas-class/sas_frames_le.h#9 $
+ */
+
+#ifndef _SAS_FRAMES_LE_H_
+#define _SAS_FRAMES_LE_H_
+
+#ifndef __LITTLE_ENDIAN_BITFIELD
+#error "Wrong header file included!"
+#endif
+
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 frame_type:4;
+ u8 dev_type:3;
+ u8 _un0:1;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un20:1;
+ u8 smp_iport:1;
+ u8 stp_iport:1;
+ u8 ssp_iport:1;
+ u8 _un247:4;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un30:1;
+ u8 smp_tport:1;
+ u8 stp_tport:1;
+ u8 ssp_tport:1;
+ u8 _un347:4;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 changing_data_ptr:1;
+ u8 retransmit:1;
+ u8 retry_data_frames:1;
+ u8 _r_c:5;
+
+ u8 num_fill_bytes:2;
+ u8 _r_d:6;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptt;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 datapres:2;
+ u8 _r_b:6;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 conf_route_table:1;
+ u8 configuring:1;
+ u8 _r_b:6;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_c:4;
+ u8 attached_dev_type:3;
+ u8 _r_d:1;
+
+ u8 linkrate:4;
+ u8 _r_e:4;
+
+ u8 attached_sata_host:1;
+ u8 iproto:3;
+ u8 _r_f:4;
+
+ u8 attached_sata_dev:1;
+ u8 tproto:3;
+ u8 _r_g:3;
+ u8 attached_sata_ps:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 hmin_linkrate:4;
+ u8 pmin_linkrate:4;
+ u8 hmax_linkrate:4;
+ u8 pmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 pptv:4;
+ u8 _r_i:3;
+ u8 virtual:1;
+
+ u8 routing_attr:4;
+ u8 _r_j:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 affil_valid:1;
+ u8 affil_supp:1;
+ u8 _r_c:6;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#endif /* _SAS_FRAMES_LE_H_ */
+
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas_internal.h linux-2.6.13/include/scsi/sas/sas_internal.h
--- linux-2.6.13-orig/include/scsi/sas/sas_internal.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas_internal.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,79 @@
+/*
+ * Serial Attached SCSI (SAS) class internal header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * $Id: //depot/sas-class/sas_internal.h#35 $
+ */
+
+#ifndef _SAS_INTERNAL_H_
+#define _SAS_INTERNAL_H_
+
+#include <scsi/sas/sas_class.h>
+
+#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+
+#ifdef SAS_DEBUG
+#define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+#else
+#define SAS_DPRINTK(fmt, ...)
+#endif
+
+int sas_show_class(enum sas_class class, char *buf);
+int sas_show_proto(enum sas_proto proto, char *buf);
+int sas_show_linkrate(enum sas_phy_linkrate linkrate, char *buf);
+int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
+
+int sas_register_phys(struct sas_ha_struct *sas_ha);
+void sas_unregister_phys(struct sas_ha_struct *sas_ha);
+
+int sas_register_ports(struct sas_ha_struct *sas_ha);
+void sas_unregister_ports(struct sas_ha_struct *sas_ha);
+
+int sas_register_scsi_host(struct sas_ha_struct *sas_ha);
+void sas_unregister_scsi_host(struct sas_ha_struct *sas_ha);
+
+int sas_start_event_thread(struct sas_ha_struct *sas_ha);
+void sas_kill_event_thread(struct sas_ha_struct *sas_ha);
+
+int sas_init_queue(struct sas_ha_struct *sas_ha);
+void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
+
+void sas_phye_loss_of_signal(struct sas_phy *phy);
+void sas_phye_oob_done(struct sas_phy *phy);
+void sas_phye_oob_error(struct sas_phy *phy);
+void sas_phye_spinup_hold(struct sas_phy *phy);
+
+void sas_deform_port(struct sas_phy *phy);
+
+void sas_porte_bytes_dmaed(struct sas_phy *phy);
+void sas_porte_broadcast_rcvd(struct sas_phy *phy);
+void sas_porte_link_reset_err(struct sas_phy *phy);
+void sas_porte_timer_event(struct sas_phy *phy);
+void sas_porte_hard_reset(struct sas_phy *phy);
+
+int sas_reserve_free_id(struct sas_port *port);
+void sas_reserve_scsi_id(struct sas_port *port, int id);
+void sas_release_scsi_id(struct sas_port *port, int id);
+
+void sas_hae_reset(struct sas_ha_struct *sas_ha);
+
+#endif /* _SAS_INTERNAL_H_ */
diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/include/scsi/sas/sas_task.h linux-2.6.13/include/scsi/sas/sas_task.h
--- linux-2.6.13-orig/include/scsi/sas/sas_task.h 1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/include/scsi/sas/sas_task.h 2005-09-09 11:13:28.000000000 -0400
@@ -0,0 +1,233 @@
+/*
+ * Serial Attached SCSI (SAS) Task interface
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/sas-class/sas_task.h#26 $
+ */
+
+#ifndef _SAS_TASK_H_
+#define _SAS_TASK_H_
+
+#include <linux/pci.h>
+#include <scsi/sas/sas_discover.h>
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK 0x01
+#define TMF_ABORT_TASK_SET 0x02
+#define TMF_CLEAR_TASK_SET 0x04
+#define TMF_LU_RESET 0x08
+#define TMF_CLEAR_ACA 0x40
+#define TMF_QUERY_TASK 0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE 0x00
+#define TMF_RESP_INVALID_FRAME 0x02
+#define TMF_RESP_FUNC_ESUPP 0x04
+#define TMF_RESP_FUNC_FAILED 0x05
+#define TMF_RESP_FUNC_SUCC 0x08
+#define TMF_RESP_NO_LUN 0x09
+#define TMF_RESP_OVERLAPPED_TAG 0x0A
+
+/*
+ service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED |
+ exec_status | | |
+ ---------------------+---------------------+-----------------------+
+ SAM_... | X | |
+ DEV_NO_RESPONSE | X | X |
+ INTERRUPTED | X | |
+ QUEUE_FULL | | X |
+ DEVICE_UNKNOWN | | X |
+ SG_ERR | | X |
+ ---------------------+---------------------+-----------------------+
+ */
+
+enum service_response {
+ SAS_TASK_COMPLETE,
+ SAS_TASK_UNDELIVERED = -1,
+};
+
+enum exec_status {
+ SAM_GOOD = 0,
+ SAM_CHECK_COND = 2,
+ SAM_COND_MET = 4,
+ SAM_BUSY = 8,
+ SAM_INTERMEDIATE = 0x10,
+ SAM_IM_COND_MET = 0x12,
+ SAM_RESV_CONFLICT= 0x14,
+ SAM_TASK_SET_FULL= 0x28,
+ SAM_ACA_ACTIVE = 0x30,
+ SAM_TASK_ABORTED = 0x40,
+
+ SAS_DEV_NO_RESPONSE = 0x80,
+ SAS_DATA_UNDERRUN,
+ SAS_DATA_OVERRUN,
+ SAS_INTERRUPTED,
+ SAS_QUEUE_FULL,
+ SAS_DEVICE_UNKNOWN,
+ SAS_SG_ERR,
+ SAS_OPEN_REJECT,
+ SAS_OPEN_TO,
+ SAS_PROTO_RESPONSE,
+ SAS_PHY_DOWN,
+ SAS_NAK_R_ERR,
+ SAS_PENDING,
+ SAS_ABORTED_TASK,
+};
+
+/* When a task finishes with a response, the LLDD examines the
+ * response:
+ * - For an ATA task task_status_struct::stat is set to
+ * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
+ * contents of struct ata_task_resp.
+ * - For SSP tasks, if no data is present or status/TMF response
+ * is valid, task_status_struct::stat is set. If data is present
+ * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
+ * task_status_struct::buf_valid_size, and task_status_struct::stat is
+ * set to SAM_CHECK_COND.
+ *
+ * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
+ * for ATA task.
+ *
+ * "frame_len" is the total frame length, which could be more or less
+ * than actually copied.
+ *
+ * Tasks ending with response, always set the residual field.
+ */
+struct ata_task_resp {
+ u16 frame_len;
+ u8 ending_fis[24]; /* dev to host or data-in */
+ u32 sstatus;
+ u32 serror;
+ u32 scontrol;
+ u32 sactive;
+};
+
+#define SAS_STATUS_BUF_SIZE 96
+
+struct task_status_struct {
+ enum service_response resp;
+ enum exec_status stat;
+ int buf_valid_size;
+
+ u8 buf[SAS_STATUS_BUF_SIZE];
+
+ u32 residual;
+ enum sas_open_rej_reason open_rej_reason;
+};
+
+/* ATA and ATAPI task queuable to a SAS LLDD.
+ */
+struct sas_ata_task {
+ struct host_to_dev_fis fis;
+ u8 atapi_packet[16]; /* 0 if not ATAPI task */
+
+ u8 retry_count; /* hardware retry, should be > 0 */
+
+ u8 dma_xfer:1; /* PIO:0 or DMA:1 */
+ u8 use_ncq:1;
+ u8 set_affil_pol:1;
+ u8 stp_affil_pol:1;
+
+ u8 device_control_reg_update:1;
+};
+
+struct sas_smp_task {
+ struct scatterlist smp_req;
+ struct scatterlist smp_resp;
+};
+
+enum task_attribute {
+ TASK_ATTR_SIMPLE = 0,
+ TASK_ATTR_HOQ = 1,
+ TASK_ATTR_ORDERED= 2,
+ TASK_ATTR_ACA = 4,
+};
+
+struct sas_ssp_task {
+ u8 retry_count; /* hardware retry, should be > 0 */
+
+ u8 LUN[8];
+ u8 enable_first_burst:1;
+ enum task_attribute task_attr;
+ u8 task_prio;
+ u8 cdb[16];
+};
+
+#define SAS_TASK_STATE_PENDING 1
+#define SAS_TASK_STATE_DONE 2
+#define SAS_TASK_STATE_ABORTED 4
+
+struct sas_task {
+ struct domain_device *dev;
+ struct list_head list;
+
+ spinlock_t task_state_lock;
+ unsigned task_state_flags;
+
+ enum sas_proto task_proto;
+
+ /* Used by the discovery code. */
+ struct timer_list timer;
+ struct completion completion;
+
+ union {
+ struct sas_ata_task ata_task;
+ struct sas_smp_task smp_task;
+ struct sas_ssp_task ssp_task;
+ };
+
+ struct scatterlist *scatter;
+ int num_scatter;
+ u32 total_xfer_len;
+ u8 data_dir:2; /* Use PCI_DMA_... */
+
+ struct task_status_struct task_status;
+ void (*task_done)(struct sas_task *task);
+
+ void *lldd_task; /* for use by LLDDs */
+ void *uldd_task;
+};
+
+static inline struct sas_task *sas_alloc_task(unsigned long flags)
+{
+ extern kmem_cache_t *sas_task_cache;
+ struct sas_task *task = kmem_cache_alloc(sas_task_cache, flags);
+
+ memset(task, 0, sizeof(*task));
+ INIT_LIST_HEAD(&task->list);
+ spin_lock_init(&task->task_state_lock);
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_timer(&task->timer);
+ init_completion(&task->completion);
+
+ return task;
+}
+
+static inline void sas_free_task(struct sas_task *task)
+{
+ if (task) {
+ extern kmem_cache_t *sas_task_cache;
+ BUG_ON(!list_empty(&task->list));
+ kmem_cache_free(sas_task_cache, task);
+ }
+}
+
+#endif /* _SAS_TASK_H_ */