Hello,
Yesterday I've tried launching various kernels on Ahtlon64 Dual-core X2
3800+ with MSI Neo4 Platinum SLI motherboard.
The results were a total catastrophica failure. As soon as I enable SMP
in the kernel, the sata driver would randomly hang after a bit of disk
activity.
Whenever apic is enabled, the system won't even be able to boot up
completely, and will hang VERY soon. Whenever I disable apic, the system
is able to bootup, but when the software mirror that I use will try to
resync for 2-3-10 mins, it will throw up a message and freeze again.
Whenever I disable apic AND lapic, the system is able to bootup AND
work, however after same 5-10 minutes it start spitting messages, which
are somewhat different thou and don't hang the system completely but
render it rather unusable anyway.
As soon as I disable SMP - everything works like a charm.
The messages I get look like this:
ataX: command 0xyyy timeout, stat 0xyy host_stat 0x0
ataX: status 0xyy { Busy }
Number of ata will vary, it will either be 1, or 2, or 1 and 2 together.
Commands, stats and status values differ as well.
The kernels I've tried were 2.6.11.7 with some patches (grsec + ipacct),
and 2.6.13.2 without any patches, vanilla style. The result is always
the same.
I plead for help, and hope for some ideas, for me it's a dead end :(
Thanks!
Hereby come extra info about the machine and kernel configuration (the
only thing which differs now, the kernel runs without SMP, since I had
to have the machine running.
root@anarxi:/usr/src/linux# uname -a
Linux anarxi.st 2.6.11.7-ipacct #8 Sun Sep 11 20:54:56 CEST 2005 i686
GNU/Linux
vlad@anarxi:~$ lspci -vvv
0000:00:00.0 Memory controller: nVidia Corporation: Unknown device 005e
(rev a3)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7100
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 0050 (rev a3)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7100
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7100
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at ff00 [size=32]
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: <available only to root>
0000:00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev
f2) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7100
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at fb00 [size=16]
Capabilities: <available only to root>
0000:00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev
f3) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at f600 [size=16]
Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdf00000-fdffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
0000:00:0a.0 Bridge: nVidia Corporation: Unknown device 0057 (rev a3)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at f500 [size=8]
Capabilities: <available only to root>
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev
a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge:
00000000fdc00000-00000000fdc00000
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev
a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge:
00000000fda00000-00000000fda00000
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev
a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge:
00000000fd800000-00000000fd800000
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev
a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fd700000-fd7fffff
Prefetchable memory behind bridge:
00000000fd600000-00000000fd600000
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: <available only to root>
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
vlad@anarxi:/usr/src/linux$ cat .config
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11.7
# Fri Oct 21 03:45:37 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
CONFIG_ACPI_BOOT=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
CONFIG_PCI_GODIRECT=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PC-card bridges
#
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
CONFIG_SCSI_SATA_NV=y
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_STEALTH=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
# CONFIG_NET_QOS is not set
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
# CONFIG_CLS_U32_MARK is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=m
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
#
# Grsecurity
#
CONFIG_GRKERNSEC=y
CONFIG_GRKERNSEC_LOW=y
# CONFIG_GRKERNSEC_MEDIUM is not set
# CONFIG_GRKERNSEC_HIGH is not set
# CONFIG_GRKERNSEC_CUSTOM is not set
#
# Address Space Protection
#
CONFIG_GRKERNSEC_KMEM=y
# CONFIG_GRKERNSEC_IO is not set
CONFIG_GRKERNSEC_PROC_MEMMAP=y
# CONFIG_GRKERNSEC_BRUTE is not set
CONFIG_GRKERNSEC_HIDESYM=y
#
# Role Based Access Control Options
#
CONFIG_GRKERNSEC_ACL_HIDEKERN=y
CONFIG_GRKERNSEC_ACL_MAXTRIES=5
CONFIG_GRKERNSEC_ACL_TIMEOUT=10
#
# Filesystem Protections
#
CONFIG_GRKERNSEC_PROC=y
CONFIG_GRKERNSEC_PROC_USER=y
CONFIG_GRKERNSEC_PROC_ADD=y
CONFIG_GRKERNSEC_LINK=y
CONFIG_GRKERNSEC_FIFO=y
CONFIG_GRKERNSEC_CHROOT=y
CONFIG_GRKERNSEC_CHROOT_MOUNT=y
CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
CONFIG_GRKERNSEC_CHROOT_PIVOT=y
CONFIG_GRKERNSEC_CHROOT_CHDIR=y
CONFIG_GRKERNSEC_CHROOT_CHMOD=y
CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
CONFIG_GRKERNSEC_CHROOT_MKNOD=y
CONFIG_GRKERNSEC_CHROOT_SHMAT=y
CONFIG_GRKERNSEC_CHROOT_UNIX=y
CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
CONFIG_GRKERNSEC_CHROOT_NICE=y
CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
CONFIG_GRKERNSEC_CHROOT_CAPS=y
#
# Kernel Auditing
#
CONFIG_GRKERNSEC_AUDIT_GROUP=y
CONFIG_GRKERNSEC_AUDIT_GID=1003
# CONFIG_GRKERNSEC_EXECLOG is not set
# CONFIG_GRKERNSEC_RESLOG is not set
# CONFIG_GRKERNSEC_CHROOT_EXECLOG is not set
# CONFIG_GRKERNSEC_AUDIT_CHDIR is not set
# CONFIG_GRKERNSEC_AUDIT_MOUNT is not set
# CONFIG_GRKERNSEC_AUDIT_IPC is not set
# CONFIG_GRKERNSEC_SIGNAL is not set
# CONFIG_GRKERNSEC_FORKFAIL is not set
# CONFIG_GRKERNSEC_TIME is not set
CONFIG_GRKERNSEC_PROC_IPADDR=y
#
# Executable Protections
#
CONFIG_GRKERNSEC_EXECVE=y
CONFIG_GRKERNSEC_SHM=y
CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_RANDPID=y
CONFIG_GRKERNSEC_TPE=y
# CONFIG_GRKERNSEC_TPE_ALL is not set
# CONFIG_GRKERNSEC_TPE_INVERT is not set
CONFIG_GRKERNSEC_TPE_GID=1005
#
# Network Protections
#
CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_RANDSRC=y
# CONFIG_GRKERNSEC_SOCKET is not set
#
# Sysctl support
#
CONFIG_GRKERNSEC_SYSCTL=y
CONFIG_GRKERNSEC_SYSCTL_ON=y
#
# Logging Options
#
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=2
#
# PaX
#
CONFIG_PAX=y
#
# PaX Control
#
# CONFIG_PAX_SOFTMODE is not set
CONFIG_PAX_EI_PAX=y
CONFIG_PAX_PT_PAX_FLAGS=y
# CONFIG_PAX_NO_ACL_FLAGS is not set
CONFIG_PAX_HAVE_ACL_FLAGS=y
# CONFIG_PAX_HOOK_ACL_FLAGS is not set
#
# Non-executable pages
#
CONFIG_PAX_NOEXEC=y
# CONFIG_PAX_PAGEEXEC is not set
# CONFIG_PAX_SEGMEXEC is not set
#
# Address Space Layout Randomization
#
CONFIG_PAX_ASLR=y
CONFIG_PAX_RANDKSTACK=y
CONFIG_PAX_RANDUSTACK=y
CONFIG_PAX_RANDMMAP=y
CONFIG_PAX_NOVSYSCALL=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y
root@anarxi:/usr/src/linux# dmesg
Linux version 2.6.11.7-ipacct ([email protected]) (gcc version 3.3.4
(Debian 1:3.3.4-6sarge1)) #8 Sun Sep 11 20:54:56 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 786416
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 557040 pages, LIFO batch:16
DMI 2.3 present.
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux-2.6.11ip ro root=901
console=ttyS0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2010.410 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3116412k/3145664k available (1781k kernel code, 28444k reserved,
133k data, 364k init, 2228160k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3981.31 BogoMIPS (lpj=1990656)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000
00000001 00000000 00000003
CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000
00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000010 00000001
00000000 00000003
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: Using configuration type 1
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
spurious 8259A interrupt: IRQ7.
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
Initializing Cryptographic API
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.31.
PCI: Setting latency timer of device 0000:00:0a.0 to 64
eth0: forcedeth.c: subsystem: 01462:7100 bound to 0000:00:0a.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
NFORCE-CK804: neither IDE port enabled (BIOS)
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
libata version 1.10 loaded.
sata_nv version 0.6
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF600 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF608 irq 11
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003
88:407f
ata1: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/133
scsi0 : sata_nv
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003
88:407f
ata2: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata2: dev 0 configured for UDMA/133
scsi1 : sata_nv
Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host1/bus0/target0/lun0: p1 p2 p3
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
md: raid1 personality registered as nr 3
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb1 has different UUID to sdb3
md: adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md0
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
md: md0: raid array is not clean -- starting background reconstruction
raid1: raid set md0 active with 2 out of 2 mirrors
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
devfs_mk_dev: could not append to parent for md/1
md: created md1
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
md: md1: raid array is not clean -- starting background reconstruction
..<6>md: syncing RAID array md0
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
md: using maximum available idle IO bandwith (but not more than 200000
KB/sec) for reconstruction.
md: using 128k window, over a total of 156167744 blocks.
raid1: raid set md1 active with 2 out of 2 mirrors
md: ... autorun DONE.
..<6>md: delaying resync of md1 until md0 has finished resync (they
share one or more physical units)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 364k freed
Adding 2931852k swap on /dev/sda2. Priority:-1 extents:1
EXT3 FS on md1, internal journal
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
ReiserFS: dm-1: Removing [1905 11968 0x0 SD]..done
ReiserFS: dm-1: There were 1 uncompleted unlinks/truncates. Completed
ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
ReiserFS: dm-4: using ordered data mode
ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-4: checking transaction log (dm-4)
ReiserFS: dm-4: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-3, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-5, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: dm-6: found reiserfs format "3.6" with standard journal
ReiserFS: dm-6: using ordered data mode
ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: dm-6: checking transaction log (dm-6)
ReiserFS: dm-6: replayed 2 transactions in 0 seconds
ReiserFS: dm-6: Using r5 hash to sort names
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 212 bytes per conntrack
eth0: no IPv6 routers present
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
md: md0: sync done.
....<6>md: syncing RAID array md1
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
md: using maximum available idle IO bandwith (but not more than 40000
KB/sec) for reconstruction.
md: using 128k window, over a total of 979840 blocks.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda3
disk 1, wo:0, o:1, dev:sdb3
md: md1: sync done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda1
disk 1, wo:0, o:1, dev:sdb1
Hi,
On Friday, 21 of October 2005 12:33, Vladimir Lazarenko wrote:
> Hello,
>
> Yesterday I've tried launching various kernels on Ahtlon64 Dual-core X2
> 3800+ with MSI Neo4 Platinum SLI motherboard.
>
> The results were a total catastrophica failure. As soon as I enable SMP
> in the kernel, the sata driver would randomly hang after a bit of disk
> activity.
I've been running Linux on Athlon64 X2 w/ Nforce4-based SLI Asus
board (single graphics adapter though) for a couple of months now and
it works just fine.
I'd bet you need to upgrade the BIOS, but if you already have, there's
likely something wrong with the mainboard.
Greetings,
Rafael
Vladimir Lazarenko wrote:
> Hello,
>
> Yesterday I've tried launching various kernels on Ahtlon64 Dual-core
> X2 3800+ with MSI Neo4 Platinum SLI motherboard.
>
> The results were a total catastrophica failure. As soon as I enable
> SMP in the kernel, the sata driver would randomly hang after a bit of
> disk activity.
>
> Whenever apic is enabled, the system won't even be able to boot up
> completely, and will hang VERY soon. Whenever I disable apic, the
> system is able to bootup, but when the software mirror that I use will
> try to resync for 2-3-10 mins, it will throw up a message and freeze
> again.
>
> Whenever I disable apic AND lapic, the system is able to bootup AND
> work, however after same 5-10 minutes it start spitting messages,
> which are somewhat different thou and don't hang the system completely
> but render it rather unusable anyway.
>
> As soon as I disable SMP - everything works like a charm.
>
For what it's worth I too have seen this same problem. It happens when I
use the stock Fedora kernels but not my custom compiled kernel. I'm not
sure what I compiled differently but at the time I thought that
something in the new kernel fixed it.
I too am running an Athlon X2 using sata_nv. I have an ASUS motherboard.
But what I noticed was that the problem went away if I used 2 gigs of
ram instead of 4 gigs. When you use the whole 4 gigs there is some
memory mapping going on and I thought perhaps the problem was related to
the sata_nv not liking the memory mapped over the 4gig barrier. I did
not try disabling SMP.
Hi,
On Friday, 21 of October 2005 18:16, Marc Perkel wrote:
>
> Vladimir Lazarenko wrote:
>
> > Hello,
> >
> > Yesterday I've tried launching various kernels on Ahtlon64 Dual-core
> > X2 3800+ with MSI Neo4 Platinum SLI motherboard.
> >
> > The results were a total catastrophica failure. As soon as I enable
> > SMP in the kernel, the sata driver would randomly hang after a bit of
> > disk activity.
> >
> > Whenever apic is enabled, the system won't even be able to boot up
> > completely, and will hang VERY soon. Whenever I disable apic, the
> > system is able to bootup, but when the software mirror that I use will
> > try to resync for 2-3-10 mins, it will throw up a message and freeze
> > again.
> >
> > Whenever I disable apic AND lapic, the system is able to bootup AND
> > work, however after same 5-10 minutes it start spitting messages,
> > which are somewhat different thou and don't hang the system completely
> > but render it rather unusable anyway.
> >
> > As soon as I disable SMP - everything works like a charm.
> >
>
> For what it's worth I too have seen this same problem. It happens when I
> use the stock Fedora kernels but not my custom compiled kernel. I'm not
> sure what I compiled differently but at the time I thought that
> something in the new kernel fixed it.
I only use kernel.org kernels, so perhaps there's a problem with the Fedora
kernel.
> I too am running an Athlon X2 using sata_nv. I have an ASUS motherboard.
> But what I noticed was that the problem went away if I used 2 gigs of
> ram instead of 4 gigs. When you use the whole 4 gigs there is some
> memory mapping going on and I thought perhaps the problem was related to
> the sata_nv not liking the memory mapped over the 4gig barrier.
That's possible. Unfortunately I cannot verify this, since there are 2GB of
RAM in my box.
I remeber someone having a problem with sata_nv DMAing over 2GB of RAM,
so there may be something wrong with it.
Greetings,
Rafael
>>>Yesterday I've tried launching various kernels on Ahtlon64 Dual-core
>>>X2 3800+ with MSI Neo4 Platinum SLI motherboard.
>>>
>>>The results were a total catastrophica failure. As soon as I enable
>>>SMP in the kernel, the sata driver would randomly hang after a bit of
>>>disk activity.
>>>
>>>Whenever apic is enabled, the system won't even be able to boot up
>>>completely, and will hang VERY soon. Whenever I disable apic, the
>>>system is able to bootup, but when the software mirror that I use will
>>>try to resync for 2-3-10 mins, it will throw up a message and freeze
>>>again.
>>>
>>>Whenever I disable apic AND lapic, the system is able to bootup AND
>>>work, however after same 5-10 minutes it start spitting messages,
>>>which are somewhat different thou and don't hang the system completely
>>>but render it rather unusable anyway.
>>>
>>>As soon as I disable SMP - everything works like a charm.
>>>
>>
>>For what it's worth I too have seen this same problem. It happens when I
>>use the stock Fedora kernels but not my custom compiled kernel. I'm not
>>sure what I compiled differently but at the time I thought that
>>something in the new kernel fixed it.
>
>
> I only use kernel.org kernels, so perhaps there's a problem with the Fedora
> kernel.
>
>
>>I too am running an Athlon X2 using sata_nv. I have an ASUS motherboard.
>>But what I noticed was that the problem went away if I used 2 gigs of
>>ram instead of 4 gigs. When you use the whole 4 gigs there is some
>>memory mapping going on and I thought perhaps the problem was related to
>>the sata_nv not liking the memory mapped over the 4gig barrier.
>
>
> That's possible. Unfortunately I cannot verify this, since there are 2GB of
> RAM in my box.
>
> I remeber someone having a problem with sata_nv DMAing over 2GB of RAM,
> so there may be something wrong with it.
That can very much be it, my box has 3G RAM.. I'll try checking that
this Saturday (tomorrow hence), though I already ordered an RMA for the
board :) Anyway, I can't live with 2G only, so that's not an option for
me. Ordered one from nForce3, it's reported to be stable in the similar
environment. Wonder if that's only nForce4 issue...
Cheers,
Vladimir
>>>Yesterday I've tried launching various kernels on Ahtlon64 Dual-core
>>>X2 3800+ with MSI Neo4 Platinum SLI motherboard.
>>>
>>>The results were a total catastrophica failure. As soon as I enable
>>>SMP in the kernel, the sata driver would randomly hang after a bit of
>>>disk activity.
>>>
>>>Whenever apic is enabled, the system won't even be able to boot up
>>>completely, and will hang VERY soon. Whenever I disable apic, the
>>>system is able to bootup, but when the software mirror that I use will
>>>try to resync for 2-3-10 mins, it will throw up a message and freeze
>>>again.
>>>
>>>Whenever I disable apic AND lapic, the system is able to bootup AND
>>>work, however after same 5-10 minutes it start spitting messages,
>>>which are somewhat different thou and don't hang the system completely
>>>but render it rather unusable anyway.
>>>
>>>As soon as I disable SMP - everything works like a charm.
>>>
>>I too am running an Athlon X2 using sata_nv. I have an ASUS motherboard.
>>But what I noticed was that the problem went away if I used 2 gigs of
>>ram instead of 4 gigs. When you use the whole 4 gigs there is some
>>memory mapping going on and I thought perhaps the problem was related to
>>the sata_nv not liking the memory mapped over the 4gig barrier.
>
> That's possible. Unfortunately I cannot verify this, since there are 2GB of
> RAM in my box.
>
> I remeber someone having a problem with sata_nv DMAing over 2GB of RAM,
> so there may be something wrong with it.
On a second thought. Why would that only occur in SMP mode? Since now
the box is with 3G ram, no SMP and it works like a charm. If I enable
SMP - the hell breaks loose.
Anyone from the IDE drivers guru world has any ideas? :)
Regards,
Vladimir
Hi,
On Saturday, 22 of October 2005 11:15, Vladimir Lazarenko wrote:
> >>>Yesterday I've tried launching various kernels on Ahtlon64 Dual-core
> >>>X2 3800+ with MSI Neo4 Platinum SLI motherboard.
> >>>
> >>>The results were a total catastrophica failure. As soon as I enable
> >>>SMP in the kernel, the sata driver would randomly hang after a bit of
> >>>disk activity.
> >>>
> >>>Whenever apic is enabled, the system won't even be able to boot up
> >>>completely, and will hang VERY soon. Whenever I disable apic, the
> >>>system is able to bootup, but when the software mirror that I use will
> >>>try to resync for 2-3-10 mins, it will throw up a message and freeze
> >>>again.
> >>>
> >>>Whenever I disable apic AND lapic, the system is able to bootup AND
> >>>work, however after same 5-10 minutes it start spitting messages,
> >>>which are somewhat different thou and don't hang the system completely
> >>>but render it rather unusable anyway.
> >>>
> >>>As soon as I disable SMP - everything works like a charm.
> >>>
> >>I too am running an Athlon X2 using sata_nv. I have an ASUS motherboard.
> >>But what I noticed was that the problem went away if I used 2 gigs of
> >>ram instead of 4 gigs. When you use the whole 4 gigs there is some
> >>memory mapping going on and I thought perhaps the problem was related to
> >>the sata_nv not liking the memory mapped over the 4gig barrier.
> >
> > That's possible. Unfortunately I cannot verify this, since there are 2GB of
> > RAM in my box.
> >
> > I remeber someone having a problem with sata_nv DMAing over 2GB of RAM,
> > so there may be something wrong with it.
>
> On a second thought. Why would that only occur in SMP mode? Since now
> the box is with 3G ram, no SMP and it works like a charm. If I enable
> SMP - the hell breaks loose.
It looks like an obscure issue. Apparently, to trigger it you need _both_
more that 2GB of RAM and SMP.
OTOH, today I played with Tyan Thunder K8WE, based on the Nvidia
CK8-04 chipset (not that much different to the regular Nforce4) in
a 2-processor configuration and 8GB of RAM, and it had no issues at all
(I installed SuSE 9.3 with the distro kernel on it). Anyway its SATA
controller is handled by the sata_nv driver, so the problem you describe
does not seem to be software-related.
I guess it's a hardware problem with the single-processor Nforce4 chipset
and a dual-core CPU. Still I have no idea what exactly it may be.
[Jeff, could you please say if this is a known problem?]
Greetings,
Rafael
>>>>>Yesterday I've tried launching various kernels on Ahtlon64 Dual-core
>>>>>X2 3800+ with MSI Neo4 Platinum SLI motherboard.
>>>>>
>>>>>The results were a total catastrophica failure. As soon as I enable
>>>>>SMP in the kernel, the sata driver would randomly hang after a bit of
>>>>>disk activity.
>>>>>
>>>>>Whenever apic is enabled, the system won't even be able to boot up
>>>>>completely, and will hang VERY soon. Whenever I disable apic, the
>>>>>system is able to bootup, but when the software mirror that I use will
>>>>>try to resync for 2-3-10 mins, it will throw up a message and freeze
>>>>>again.
>>>>>
>>>>>Whenever I disable apic AND lapic, the system is able to bootup AND
>>>>>work, however after same 5-10 minutes it start spitting messages,
>>>>>which are somewhat different thou and don't hang the system completely
>>>>>but render it rather unusable anyway.
>>>>>
>>>>>As soon as I disable SMP - everything works like a charm.
>>>>>
>>>>
>>>>I too am running an Athlon X2 using sata_nv. I have an ASUS motherboard.
>>>>But what I noticed was that the problem went away if I used 2 gigs of
>>>>ram instead of 4 gigs. When you use the whole 4 gigs there is some
>>>>memory mapping going on and I thought perhaps the problem was related to
>>>>the sata_nv not liking the memory mapped over the 4gig barrier.
>>>
>>>That's possible. Unfortunately I cannot verify this, since there are 2GB of
>>>RAM in my box.
>>>
>>>I remeber someone having a problem with sata_nv DMAing over 2GB of RAM,
>>>so there may be something wrong with it.
>>
>>On a second thought. Why would that only occur in SMP mode? Since now
>>the box is with 3G ram, no SMP and it works like a charm. If I enable
>>SMP - the hell breaks loose.
>
>
> It looks like an obscure issue. Apparently, to trigger it you need _both_
> more that 2GB of RAM and SMP.
Looks like it. I played around today as well, and it seems to not to
occur with 2Gb.
> OTOH, today I played with Tyan Thunder K8WE, based on the Nvidia
> CK8-04 chipset (not that much different to the regular Nforce4) in
> a 2-processor configuration and 8GB of RAM, and it had no issues at all
> (I installed SuSE 9.3 with the distro kernel on it). Anyway its SATA
> controller is handled by the sata_nv driver, so the problem you describe
> does not seem to be software-related.
Hehe, as if reading your mind I ordered Tyan K8E today, and in case that
won't work, i'll just put a pci raiser there and stuck an external SATA
from silicon image or promise there :)
I've heard from another person (thou have not seen it myself) that there
was kind of the same problem (hanging sata) on an opteron-based machine.
I was too late to ask the mb model thou, so this info is kind of
useless, but just for statistical purposes I mention it here.
> [Jeff, could you please say if this is a known problem?]
>>>>> I too am running an Athlon X2 using sata_nv. I have an ASUS
>>>>> motherboard. But what I noticed was that the problem went away if I
>>>>> used 2 gigs of ram instead of 4 gigs. When you use the whole 4 gigs
>>>>> there is some memory mapping going on and I thought perhaps the
>>>>> problem was related to the sata_nv not liking the memory mapped
>>>>> over the 4gig barrier.
>>>> That's possible. Unfortunately I cannot verify this, since there
>>>> are 2GB of
>>>> RAM in my box.
>>>>
>>>> I remeber someone having a problem with sata_nv DMAing over 2GB of RAM,
>>>> so there may be something wrong with it.
>>> On a second thought. Why would that only occur in SMP mode? Since now
>>> the box is with 3G ram, no SMP and it works like a charm. If I enable
>>> SMP - the hell breaks loose.
>> It looks like an obscure issue. Apparently, to trigger it you need
>> _both_ more that 2GB of RAM and SMP.
>
>
> Looks like it. I played around today as well, and it seems to not to
> occur with 2Gb.
>
>> OTOH, today I played with Tyan Thunder K8WE, based on the Nvidia
>> CK8-04 chipset (not that much different to the regular Nforce4) in
>> a 2-processor configuration and 8GB of RAM, and it had no issues at all
>> (I installed SuSE 9.3 with the distro kernel on it). Anyway its SATA
>> controller is handled by the sata_nv driver, so the problem you describe
>> does not seem to be software-related.
> Hehe, as if reading your mind I ordered Tyan K8E today, and in case that
> won't work, i'll just put a pci raiser there and stuck an external SATA
> from silicon image or promise there :)
>
> I've heard from another person (thou have not seen it myself) that there
> was kind of the same problem (hanging sata) on an opteron-based machine.
> I was too late to ask the mb model thou, so this info is kind of
> useless, but just for statistical purposes I mention it here.
>
>> [Jeff, could you please say if this is a known problem?]
Ok, the last status update.
Tyan K8E arrived today, and after a short while (much longer while than
on MSI motherboard thou) it started spitting out errors again (this is
in SMP mode):
end_request: I/O error, dev sda, sector 35447511
raid1: sda3: rescheduling sector 27623856
raid1: sda3: redirecting sector 27623856 to another mirror
ATA: abnormal status 0xD0 on port 0x9F7
ATA: abnormal status 0xD0 on port 0x9F7
ATA: abnormal status 0xD0 on port 0x9F7
ata1: command 0x25 timeout, stat 0xd0 host_stat 0x1
ata1: status=0xd0 { Busy }
SCSI error : <0 0 0 0> return code = 0x8000002
sda: Current: sense key: Aborted Command
Additional sense: Scsi parity error
And so on, and so forth, with various blocks.
At this moment in time, the resync of 160G raid-1 was attempted in the
background.
MSI mobo from the original mail had nForce4-SLi chipset, whereas this
Tyan K8E has nForce4 Ultra.
Yet again, if i enable apic, the boot process hangs here:
sata_nv version 0.6
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 11
These are the last messages that I get. The same behaviour on both
motherboard. Shoudl I enable apic, it hangs on that.
When I disable apic, the boot sequence looks like:
sata_nv version 0.6
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 11
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003
88:407f
ata1: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/133
scsi0 : sata_nv
... Thus, perfectly normal. Further on it goes onto ata2, and so on.
Hereby, the lspci from the new motherboard:
root@anarxi:~# lspci
0000:00:00.0 Memory controller: nVidia Corporation: Unknown device 005e
(rev a3)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 0050 (rev a3)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
0000:00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev f2)
0000:00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev f3)
0000:00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
0000:00:0a.0 Bridge: nVidia Corporation: Unknown device 0057 (rev a3)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
0000:01:07.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
And lspci -v from the IDE parts:
0000:00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev
f2) (prog-if 8a [Master SecP PriP])
Subsystem: Tyan Computer: Unknown device 2865
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
0000:00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev
f3) (prog-if 85 [Master SecO PriO])
Subsystem: Tyan Computer: Unknown device 2865
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at dc00 [size=16]
Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
I'd very much appreciate some feedback on this. The box crashes every
40-50 minutes in SMP mode, and without second core it's overloaded, and
running on the edge of crash as well.
Let me know if i need to test anything or you want more info.
Thanks!
Regards,
Vladimir
Hi,
On Wednesday, 26 of October 2005 03:03, Vladimir Lazarenko wrote:
}-- snip --{
>
> Let me know if i need to test anything or you want more info.
Could you please create a Bugzilla entry for that, and put all of the
information you think can be relevant in there (including
.config(s), the output(s) of dmesg, the contents of /proc/interrupts
etc. for failing configurations)?
Greetings,
Rafael
Rafael J. Wysocki wrote:
> Hi,
>
> On Wednesday, 26 of October 2005 03:03, Vladimir Lazarenko wrote:
> }-- snip --{
>
>>Let me know if i need to test anything or you want more info.
>
>
> Could you please create a Bugzilla entry for that, and put all of the
> information you think can be relevant in there (including
> .config(s), the output(s) of dmesg, the contents of /proc/interrupts
> etc. for failing configurations)?
Actually, yesterday I was too tired to post a followup, but I'll surely
do this now, since at 7am I think I was able to finally find a solution.
As a last step of my playaround, I took 2.6.14-rc5 and decided to give
it a go. To my amazement - the box booted up WITH apic, the test raid
resync went smoothly, and the box lives till this moment! :)
Happy-happy joy-joy. In the notable differences I saw libata going from
0.10 to 0.12, and sata_nv from 0.6 to 0.9 (actually 0.8 was the version,
I guess Jeff forgot to bump the version, since comment says "0.9 Fixed
the bug introduced with MCPxx support", but version defined is still 0.8).
Oh man, I can't believe I'm through with this.
Thanks everyone very very much for bearing with me all this time.
I suppose Bugzilla entry won't be necessary anymore? Or do you still
want that for statistical purposes?
Regards,
Vladimir
> Yet again, if i enable apic, the boot process hangs here:
> sata_nv version 0.6
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 11
> ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 11
>
> These are the last messages that I get. The same behaviour on both
> motherboard. Shoudl I enable apic, it hangs on that.
>
> When I disable apic, the boot sequence looks like:
>
> sata_nv version 0.6
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 11
> ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 11
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69
> 86:3e01 87:4003
> 88:407f
> ata1: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
> nv_sata: Primary device added
> nv_sata: Primary device removed
> nv_sata: Secondary device added
> nv_sata: Secondary device removed
Can you send the output of "cat /proc/interrupts" and a "lspci -xxx" ?
Also you may want to disable hotplug from the device table in sata_nv.c
for now in case this has something to do with hotplug interrupts.
root@anarxi:~/bck# lspci -xxx
0000:00:00.0 Memory controller: nVidia Corporation: Unknown device 005e (rev a3)
00: de 10 5e 00 06 00 b0 00 a3 00 80 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 65 28
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: f1 10 65 28 08 e0 e0 01 22 00 11 11 d0 00 00 00
50: 23 06 7f 80 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 00 00
70: 44 44 00 00 d0 09 00 00 00 00 00 00 88 00 00 00
80: 13 ff 88 00 fa 00 00 00 03 00 00 00 61 00 00 00
90: 0e 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 0050 (rev a3)
00: de 10 50 00 0f 00 a0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 65 28
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: f1 10 65 28 00 f0 ff fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 f9 ff
70: 10 00 ff ff 41 00 00 00 00 00 04 19 0a 07 00 0b
80: 00 3b 00 b0 09 05 00 00 c0 00 00 01 00 00 00 00
90: 00 00 00 00 00 00 00 00 21 64 87 a9 de bc 00 00
a0: 03 00 30 c1 00 00 01 00 00 00 00 00 00 00 00 00
b0: a2 0c a3 0c 00 08 80 08 00 00 00 00 00 00 00 00
c0: 35 82 80 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 0c 10 01 00 00 00 d0 00 80 39 14 20 61 44 44 11
f0: 5a ff 5f bf 00 00 00 c0 10 ff ff ff 00 00 30 07
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 0052 (rev a2)
00: de 10 52 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
10: 01 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 1c 00 00 41 1c 00 00 00 00 00 00 f1 10 65 28
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
40: f1 10 65 28 01 00 02 c0 00 00 00 00 00 00 00 00
50: 01 1c 00 00 41 1c 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:06.0 IDE interface: nVidia Corporation: Unknown device 0053 (rev f2)
00: de 10 53 00 05 00 b0 00 f2 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 f1 10 65 28
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: f1 10 65 28 01 00 02 00 00 00 00 00 00 00 00 00
50: 00 f0 01 00 00 00 00 00 a8 a8 a8 a8 aa 00 99 99
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 ff ff ff 00 00 30 07
0000:00:07.0 IDE interface: nVidia Corporation: Unknown device 0054 (rev f3)
00: de 10 54 00 07 00 b0 00 f3 85 01 01 00 00 00 00
10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00
20: 01 dc 00 00 00 d0 bf fe 00 00 00 00 f1 10 65 28
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
40: f1 10 65 28 01 00 02 00 00 00 00 00 00 00 00 00
50: 17 00 00 15 00 00 00 00 a8 20 a8 20 66 00 20 20
60: 00 c7 00 c7 51 0c 00 00 08 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 00 30 bf 6d 00 00 0e 38 00 50 03 87
90: 00 00 0e 00 00 00 00 00 06 00 06 10 00 00 01 01
a0: 50 01 00 7c 00 00 00 00 00 00 00 00 33 bb aa 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
d0: 0a 00 02 09 42 00 00 00 00 00 00 00 09 21 60 80
e0: 0a 00 02 09 42 00 00 00 00 00 00 00 00 00 00 80
f0: 00 00 00 00 00 00 00 00 00 ff ff ff 11 49 32 07
0000:00:09.0 PCI bridge: nVidia Corporation: Unknown device 005c (rev a2)
00: de 10 5c 00 07 00 a0 00 a2 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 c0 c0 80 22
20: 00 fd f0 fd a0 fe a0 fe 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 0c 02
40: 00 00 07 00 01 00 02 00 07 00 00 00 00 00 44 01
50: 00 00 fe bf 00 00 00 00 ff 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 0a 00 00 0c 00 40 00 00 00 00 00 08 00 00 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:0a.0 Bridge: nVidia Corporation: Unknown device 0057 (rev a3)
00: de 10 57 00 07 00 b0 00 a3 00 80 06 00 00 00 00
10: 00 c0 bf fe 01 d8 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 65 28
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14
40: f1 10 65 28 01 00 02 fe 00 01 00 00 0a 00 00 10
50: 05 64 84 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 0f 00 00 00 08 00 02 a8 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 11 00 00 00 40 ff ff ff 04 2c 32 07
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
00: de 10 5d 00 07 00 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 b1 b1 00 00
20: 90 fe 90 fe 81 fe 81 fe 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 c0 04 00 00 10 28 00 00 21 34 01 03
90: 00 00 41 10 80 0c 40 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
00: de 10 5d 00 07 00 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 a1 a1 00 00
20: 70 fe 70 fe 61 fe 61 fe 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 c0 04 00 00 10 28 00 00 11 34 01 02
90: 00 00 41 10 00 05 20 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
00: de 10 5d 00 07 00 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 91 91 00 00
20: 50 fe 50 fe 41 fe 41 fe 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 c0 04 00 00 10 28 00 00 11 34 01 01
90: 00 00 81 10 00 05 10 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 005d (rev a3)
00: de 10 5d 00 07 00 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 81 81 00 00
20: 30 fe 30 fe 21 fe 21 fe 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 c0 04 00 00 10 28 00 00 01 35 01 00
90: 00 00 01 11 80 25 08 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 00 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 69 01 61 01 00 00 05 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 bf 00 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 0a 00 00 00 0b 00 00 03 b0 fe 00 80 c0 fe 00
90: 03 00 c0 00 00 bf fe 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 00 e0 00 80 5f e0 00 00 00 00 00 00 00 00 00
c0: 13 80 00 00 00 f0 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 00 00 02 01 00 00 04 01 00 00 06
50: 01 00 00 08 01 00 00 0a 00 00 00 00 00 00 00 00
60: 00 fe e0 01 00 fe e0 01 00 fe e0 01 00 fe e0 01
70: 00 fe e0 01 00 fe e0 01 00 00 00 00 00 00 00 00
80: 77 07 00 00 00 00 00 00 42 35 82 13 31 0b 00 00
90: c0 8e 0c 18 07 07 7b 3e 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: bd 59 2f 7d 63 00 00 00 1d 77 48 38 f1 06 36 38
c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: b1 27 9a 79 3d 06 ee 2c 98 31 16 97 65 a9 34 17
e0: 8f 80 ca 69 7d 2a 25 4c 04 08 92 ef fb b8 48 4b
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 40 00 40 08 00 00 00 00 00 00 00 00
50: 08 00 08 00 40 00 00 00 00 00 00 00 00 00 02 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 00 00 00 00 db 0e 00 00 00 00 60 d0 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 20 02 52 0c 19 11 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
00: 06 11 44 30 87 00 10 02 80 10 00 0c 08 20 00 00
10: 00 f0 ff fd 01 cc 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 44 30
30: 00 00 00 00 50 00 00 00 00 00 00 00 07 01 00 20
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 02 e4 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:01:07.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
00: 33 53 11 88 03 00 00 02 00 00 00 03 00 00 00 00
10: 00 00 00 fd 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00