2006-09-24 19:58:52

by Howard Chu

[permalink] [raw]
Subject: Re: skge error; hangs w/ hardware memory hole

Not sure this got through last time...

The NETDEV WATCHDOG message only shows up after trying to ping something
thru the interface. This is on 2.6.18 with the patch at

ftp://ftp.firstfloor.org/pub/ak/x86_64/quilt/patches/via-force-dma-mask


Andreas Kleen wrote:
> Am Mi 20.09.2006 22:13 schrieb Howard Chu <[email protected]>:
>
>> OK, booted up. With the memory hole enabled in the BIOS, skge still
>> fails. There's one error message during the boot sequence, and then
>> NETDEV WATCHDOG transmit timeout messages when I try to ping
>> something.
>>
>> Here's a snippet of the dmesg:
>>
>
> Did you see the
>
> disallowing DAC because of VIA bridge
>
> message anywhere? Best you send full dmesg
>
>
> -Andi

--
-- Howard Chu
Chief Architect, Symas Corp. http://www.symas.com
Director, Highland Sun http://highlandsun.com/hyc
OpenLDAP Core Team http://www.openldap.org/project/


Attachments:
dmesg.txt (24.59 kB)
ping.txt (719.00 B)
Download all attachments