This is probably a Dell problem, but I'm hoping someone on the list has
seen similar behavior before.
Sound input and RS232 serial input do not function on a Dell Latitude D620.
Details:
- Fedora Core 5 installation, running vanilla kernel.org 2.6.16.16 and
2.6.18, results
are identical. Sound input times out with an I/O error, no serial
input characters are
ever seen. I've tried with and without acpi, apic, and irqpoll,
and see no different results.
- lspci:
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated
Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics
Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family)
Serial ATA Storage Controllers cc=IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
03:01.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0
CardBus/SmartCardBus Controller (rev 40)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752
Gigabit Ethernet PCI Express (rev 02)
-# cat /proc/interrupts
CPU0 CPU1
0: 122071 115893 IO-APIC-edge timer
1: 279 303 IO-APIC-edge i8042
4: 11 0 IO-APIC-edge serial
8: 1 0 IO-APIC-edge rtc
9: 0 3 IO-APIC-level acpi
12: 1945 2177 IO-APIC-edge i8042
14: 5400 1996 IO-APIC-edge libata
15: 4172 4023 IO-APIC-edge ide1
17: 1427 0 IO-APIC-level yenta, eth0
19: 207 0 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
20: 4247 4295 IO-APIC-level uhci_hcd:usb2, HDA Intel
21: 1238 957 IO-APIC-level uhci_hcd:usb3
22: 0 0 IO-APIC-level uhci_hcd:usb4
NMI: 0 0
LOC: 237898 237897
ERR: 0
MIS: 0
Can anyone point me in some general direction? I have no problem
hacking around in
kernel source, but a good start never hurts :-)
Thanks for any assistance.
On Mon, 25 Sep 2006 14:30:54 -0600
Roe Peterson <[email protected]> wrote:
> This is probably a Dell problem, but I'm hoping someone on the list has
> seen similar behavior before.
It's not familiar.
> Sound input and RS232 serial input do not function on a Dell Latitude D620.
Did any kernel ever work correctly? Tried a 2.4.x kernel?
Please send the full dmesg output.
At Mon, 25 Sep 2006 14:30:54 -0600,
Roe Peterson wrote:
>
>
> This is probably a Dell problem, but I'm hoping someone on the list has
> seen similar behavior before.
>
> Sound input and RS232 serial input do not function on a Dell Latitude D620.
Could you try alsa-driver 1.0.13rc3 available on http://www.alsa-project.org?
It's identical with the ALSA codes in the latest linus git tree, and
can be built on 2.6.16, too.
For sound input, you have to choose the right capture source.
If you still have sound problems, please report it on ALSA bugtracking
system (follow from alsa-project.org main page).
Takashi