From: Christophe Leroy <[email protected]>
[ 0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead
find_legacy_serial_ports() is called early from setup_arch(), before
paging_init(). vmalloc is not available yet, ioremap shouldn't be
used that early.
Use early_ioremap() and switch to a regular ioremap() later.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/powerpc/kernel/legacy_serial.c | 33 +++++++++++++++++++++++++----
1 file changed, 29 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index f061e06e9f51..8b2c1a8553a0 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -15,6 +15,7 @@
#include <asm/udbg.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
+#include <asm/early_ioremap.h>
#undef DEBUG
@@ -34,6 +35,7 @@ static struct legacy_serial_info {
unsigned int clock;
int irq_check_parent;
phys_addr_t taddr;
+ void __iomem *early_addr;
} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
static const struct of_device_id legacy_serial_parents[] __initconst = {
@@ -325,17 +327,16 @@ static void __init setup_legacy_serial_console(int console)
{
struct legacy_serial_info *info = &legacy_serial_infos[console];
struct plat_serial8250_port *port = &legacy_serial_ports[console];
- void __iomem *addr;
unsigned int stride;
stride = 1 << port->regshift;
/* Check if a translated MMIO address has been found */
if (info->taddr) {
- addr = ioremap(info->taddr, 0x1000);
- if (addr == NULL)
+ info->early_addr = early_ioremap(info->taddr, 0x1000);
+ if (info->early_addr == NULL)
return;
- udbg_uart_init_mmio(addr, stride);
+ udbg_uart_init_mmio(info->early_addr, stride);
} else {
/* Check if it's PIO and we support untranslated PIO */
if (port->iotype == UPIO_PORT && isa_io_special)
@@ -353,6 +354,30 @@ static void __init setup_legacy_serial_console(int console)
udbg_uart_setup(info->speed, info->clock);
}
+static int __init ioremap_legacy_serial_console(void)
+{
+ struct legacy_serial_info *info = &legacy_serial_infos[legacy_serial_console];
+ struct plat_serial8250_port *port = &legacy_serial_ports[legacy_serial_console];
+ void __iomem *vaddr;
+
+ if (legacy_serial_console < 0)
+ return 0;
+
+ if (!info->early_addr)
+ return 0;
+
+ vaddr = ioremap(info->taddr, 0x1000);
+ if (WARN_ON(!vaddr))
+ return -ENOMEM;
+
+ udbg_uart_init_mmio(vaddr, 1 << port->regshift);
+ early_iounmap(info->early_addr, 0x1000);
+ info->early_addr = NULL;
+
+ return 0;
+}
+early_initcall(ioremap_legacy_serial_console);
+
/*
* This is called very early, as part of setup_system() or eventually
* setup_arch(), basically before anything else in this file. This function
--
2.25.0
Le 20/04/2021 à 15:32, Christophe Leroy a écrit :
> From: Christophe Leroy <[email protected]>
Oops, I forgot to reset the Author. Michael if you apply this patch please update the author and
remove the old Signed-off-by
Thanks
>
> [ 0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead
>
> find_legacy_serial_ports() is called early from setup_arch(), before
> paging_init(). vmalloc is not available yet, ioremap shouldn't be
> used that early.
>
> Use early_ioremap() and switch to a regular ioremap() later.
>
> Signed-off-by: Christophe Leroy <[email protected]>
> Signed-off-by: Christophe Leroy <[email protected]>
> ---
> arch/powerpc/kernel/legacy_serial.c | 33 +++++++++++++++++++++++++----
> 1 file changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
> index f061e06e9f51..8b2c1a8553a0 100644
> --- a/arch/powerpc/kernel/legacy_serial.c
> +++ b/arch/powerpc/kernel/legacy_serial.c
> @@ -15,6 +15,7 @@
> #include <asm/udbg.h>
> #include <asm/pci-bridge.h>
> #include <asm/ppc-pci.h>
> +#include <asm/early_ioremap.h>
>
> #undef DEBUG
>
> @@ -34,6 +35,7 @@ static struct legacy_serial_info {
> unsigned int clock;
> int irq_check_parent;
> phys_addr_t taddr;
> + void __iomem *early_addr;
> } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
>
> static const struct of_device_id legacy_serial_parents[] __initconst = {
> @@ -325,17 +327,16 @@ static void __init setup_legacy_serial_console(int console)
> {
> struct legacy_serial_info *info = &legacy_serial_infos[console];
> struct plat_serial8250_port *port = &legacy_serial_ports[console];
> - void __iomem *addr;
> unsigned int stride;
>
> stride = 1 << port->regshift;
>
> /* Check if a translated MMIO address has been found */
> if (info->taddr) {
> - addr = ioremap(info->taddr, 0x1000);
> - if (addr == NULL)
> + info->early_addr = early_ioremap(info->taddr, 0x1000);
> + if (info->early_addr == NULL)
> return;
> - udbg_uart_init_mmio(addr, stride);
> + udbg_uart_init_mmio(info->early_addr, stride);
> } else {
> /* Check if it's PIO and we support untranslated PIO */
> if (port->iotype == UPIO_PORT && isa_io_special)
> @@ -353,6 +354,30 @@ static void __init setup_legacy_serial_console(int console)
> udbg_uart_setup(info->speed, info->clock);
> }
>
> +static int __init ioremap_legacy_serial_console(void)
> +{
> + struct legacy_serial_info *info = &legacy_serial_infos[legacy_serial_console];
> + struct plat_serial8250_port *port = &legacy_serial_ports[legacy_serial_console];
> + void __iomem *vaddr;
> +
> + if (legacy_serial_console < 0)
> + return 0;
> +
> + if (!info->early_addr)
> + return 0;
> +
> + vaddr = ioremap(info->taddr, 0x1000);
> + if (WARN_ON(!vaddr))
> + return -ENOMEM;
> +
> + udbg_uart_init_mmio(vaddr, 1 << port->regshift);
> + early_iounmap(info->early_addr, 0x1000);
> + info->early_addr = NULL;
> +
> + return 0;
> +}
> +early_initcall(ioremap_legacy_serial_console);
> +
> /*
> * This is called very early, as part of setup_system() or eventually
> * setup_arch(), basically before anything else in this file. This function
>
Hi Christophe,
On 21/04/21 1:32 am, Christophe Leroy wrote:
> From: Christophe Leroy <[email protected]>
>
> [ 0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead
>
> find_legacy_serial_ports() is called early from setup_arch(), before
> paging_init(). vmalloc is not available yet, ioremap shouldn't be
> used that early.
>
> Use early_ioremap() and switch to a regular ioremap() later.
>
> Signed-off-by: Christophe Leroy <[email protected]>
> Signed-off-by: Christophe Leroy <[email protected]>
> ---
I gave it a spin on my T2080RDB. The error message is gone and I still
get console output.
Tested-by: Chris Packham <[email protected]>
> arch/powerpc/kernel/legacy_serial.c | 33 +++++++++++++++++++++++++----
> 1 file changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
> index f061e06e9f51..8b2c1a8553a0 100644
> --- a/arch/powerpc/kernel/legacy_serial.c
> +++ b/arch/powerpc/kernel/legacy_serial.c
> @@ -15,6 +15,7 @@
> #include <asm/udbg.h>
> #include <asm/pci-bridge.h>
> #include <asm/ppc-pci.h>
> +#include <asm/early_ioremap.h>
>
> #undef DEBUG
>
> @@ -34,6 +35,7 @@ static struct legacy_serial_info {
> unsigned int clock;
> int irq_check_parent;
> phys_addr_t taddr;
> + void __iomem *early_addr;
> } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
>
> static const struct of_device_id legacy_serial_parents[] __initconst = {
> @@ -325,17 +327,16 @@ static void __init setup_legacy_serial_console(int console)
> {
> struct legacy_serial_info *info = &legacy_serial_infos[console];
> struct plat_serial8250_port *port = &legacy_serial_ports[console];
> - void __iomem *addr;
> unsigned int stride;
>
> stride = 1 << port->regshift;
>
> /* Check if a translated MMIO address has been found */
> if (info->taddr) {
> - addr = ioremap(info->taddr, 0x1000);
> - if (addr == NULL)
> + info->early_addr = early_ioremap(info->taddr, 0x1000);
> + if (info->early_addr == NULL)
> return;
> - udbg_uart_init_mmio(addr, stride);
> + udbg_uart_init_mmio(info->early_addr, stride);
> } else {
> /* Check if it's PIO and we support untranslated PIO */
> if (port->iotype == UPIO_PORT && isa_io_special)
> @@ -353,6 +354,30 @@ static void __init setup_legacy_serial_console(int console)
> udbg_uart_setup(info->speed, info->clock);
> }
>
> +static int __init ioremap_legacy_serial_console(void)
> +{
> + struct legacy_serial_info *info = &legacy_serial_infos[legacy_serial_console];
> + struct plat_serial8250_port *port = &legacy_serial_ports[legacy_serial_console];
> + void __iomem *vaddr;
> +
> + if (legacy_serial_console < 0)
> + return 0;
> +
> + if (!info->early_addr)
> + return 0;
> +
> + vaddr = ioremap(info->taddr, 0x1000);
> + if (WARN_ON(!vaddr))
> + return -ENOMEM;
> +
> + udbg_uart_init_mmio(vaddr, 1 << port->regshift);
> + early_iounmap(info->early_addr, 0x1000);
> + info->early_addr = NULL;
> +
> + return 0;
> +}
> +early_initcall(ioremap_legacy_serial_console);
> +
> /*
> * This is called very early, as part of setup_system() or eventually
> * setup_arch(), basically before anything else in this file. This function
On 20/04/2021 23:32, Christophe Leroy wrote:
> From: Christophe Leroy <[email protected]>
>
> [ 0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead
>
> find_legacy_serial_ports() is called early from setup_arch(), before
> paging_init(). vmalloc is not available yet, ioremap shouldn't be
> used that early.
>
> Use early_ioremap() and switch to a regular ioremap() later.
>
> Signed-off-by: Christophe Leroy <[email protected]>
> Signed-off-by: Christophe Leroy <[email protected]>
My POWER9 box silently reboots with the upstream kernel which has this.
This hunk:
diff --git a/arch/powerpc/kernel/legacy_serial.c
b/arch/powerpc/kernel/legacy_serial.c
index f061e06e9f51..6bdb3f5f64e3 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -336,6 +336,16 @@ static void __init setup_legacy_serial_console(int
console)
if (addr == NULL)
return;
udbg_uart_init_mmio(addr, stride);
+
+
+ {
+ void *ea = early_ioremap(info->taddr, 0x1000);
+ pr_err("___K___ (%u) %s %u: ior=%lx early=%lx\n",
+ smp_processor_id(), __func__, __LINE__,
+ (unsigned long) addr, (unsigned
long) ea);
+ early_iounmap(ea, 0x1000);
+ }
+
produced:
[ 0.000000] ___K___ (0) setup_legacy_serial_console 345:
ior=c00a0000800003f8 early=ffffffffffc003f8
The early address just does not look right - ffffffffffc003f8. Do you
have a quick idea what is exactly wrong before I wake up and dig more?
:) It is powernv_defconfig. Thanks,
> ---
> arch/powerpc/kernel/legacy_serial.c | 33 +++++++++++++++++++++++++----
> 1 file changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
> index f061e06e9f51..8b2c1a8553a0 100644
> --- a/arch/powerpc/kernel/legacy_serial.c
> +++ b/arch/powerpc/kernel/legacy_serial.c
> @@ -15,6 +15,7 @@
> #include <asm/udbg.h>
> #include <asm/pci-bridge.h>
> #include <asm/ppc-pci.h>
> +#include <asm/early_ioremap.h>
>
> #undef DEBUG
>
> @@ -34,6 +35,7 @@ static struct legacy_serial_info {
> unsigned int clock;
> int irq_check_parent;
> phys_addr_t taddr;
> + void __iomem *early_addr;
> } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
>
> static const struct of_device_id legacy_serial_parents[] __initconst = {
> @@ -325,17 +327,16 @@ static void __init setup_legacy_serial_console(int console)
> {
> struct legacy_serial_info *info = &legacy_serial_infos[console];
> struct plat_serial8250_port *port = &legacy_serial_ports[console];
> - void __iomem *addr;
> unsigned int stride;
>
> stride = 1 << port->regshift;
>
> /* Check if a translated MMIO address has been found */
> if (info->taddr) {
> - addr = ioremap(info->taddr, 0x1000);
> - if (addr == NULL)
> + info->early_addr = early_ioremap(info->taddr, 0x1000);
> + if (info->early_addr == NULL)
> return;
> - udbg_uart_init_mmio(addr, stride);
> + udbg_uart_init_mmio(info->early_addr, stride);
> } else {
> /* Check if it's PIO and we support untranslated PIO */
> if (port->iotype == UPIO_PORT && isa_io_special)
> @@ -353,6 +354,30 @@ static void __init setup_legacy_serial_console(int console)
> udbg_uart_setup(info->speed, info->clock);
> }
>
> +static int __init ioremap_legacy_serial_console(void)
> +{
> + struct legacy_serial_info *info = &legacy_serial_infos[legacy_serial_console];
> + struct plat_serial8250_port *port = &legacy_serial_ports[legacy_serial_console];
> + void __iomem *vaddr;
> +
> + if (legacy_serial_console < 0)
> + return 0;
> +
> + if (!info->early_addr)
> + return 0;
> +
> + vaddr = ioremap(info->taddr, 0x1000);
> + if (WARN_ON(!vaddr))
> + return -ENOMEM;
> +
> + udbg_uart_init_mmio(vaddr, 1 << port->regshift);
> + early_iounmap(info->early_addr, 0x1000);
> + info->early_addr = NULL;
> +
> + return 0;
> +}
> +early_initcall(ioremap_legacy_serial_console);
> +
> /*
> * This is called very early, as part of setup_system() or eventually
> * setup_arch(), basically before anything else in this file. This function
>
--
Alexey