2017-08-01 10:02:45

by Arvind Yadav

[permalink] [raw]
Subject: [PATCH 1/2] Input: tegra-kbc: Handle return value of clk_prepare_enable.

clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <[email protected]>
---
drivers/input/keyboard/tegra-kbc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index 0c07e10..edc1385 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -370,8 +370,11 @@ static int tegra_kbc_start(struct tegra_kbc *kbc)
{
unsigned int debounce_cnt;
u32 val = 0;
+ int ret;

- clk_prepare_enable(kbc->clk);
+ ret = clk_prepare_enable(kbc->clk);
+ if (ret)
+ return ret;

/* Reset the KBC controller to clear all previous status.*/
reset_control_assert(kbc->rst);
--
1.9.1


2017-08-01 10:04:27

by Arvind Yadav

[permalink] [raw]
Subject: [PATCH 2/2] Input: pxa27x_keypad: Handle return value of clk_prepare_enable.

clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <[email protected]>
---
drivers/input/keyboard/pxa27x_keypad.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 3841fa3..a3396a7 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -644,9 +644,12 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
static int pxa27x_keypad_open(struct input_dev *dev)
{
struct pxa27x_keypad *keypad = input_get_drvdata(dev);
-
+ int ret;
/* Enable unit clock */
- clk_prepare_enable(keypad->clk);
+ ret = clk_prepare_enable(keypad->clk);
+ if (ret)
+ return ret;
+
pxa27x_keypad_config(keypad);

return 0;
@@ -683,6 +686,7 @@ static int pxa27x_keypad_resume(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
struct input_dev *input_dev = keypad->input_dev;
+ int ret;

/*
* If the keypad is used as wake up source, the clock is not turned
@@ -695,7 +699,11 @@ static int pxa27x_keypad_resume(struct device *dev)

if (input_dev->users) {
/* Enable unit clock */
- clk_prepare_enable(keypad->clk);
+ ret = clk_prepare_enable(keypad->clk);
+ if (ret) {
+ mutex_unlock(&input_dev->mutex);
+ return ret;
+ }
pxa27x_keypad_config(keypad);
}

--
1.9.1

2017-08-31 18:51:00

by Dmitry Torokhov

[permalink] [raw]
Subject: Re: [PATCH 2/2] Input: pxa27x_keypad: Handle return value of clk_prepare_enable.

On Tue, Aug 01, 2017 at 03:34:10PM +0530, Arvind Yadav wrote:
> clk_prepare_enable() can fail here and we must check its return value.
>
> Signed-off-by: Arvind Yadav <[email protected]>
> ---
> drivers/input/keyboard/pxa27x_keypad.c | 14 +++++++++++---
> 1 file changed, 11 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
> index 3841fa3..a3396a7 100644
> --- a/drivers/input/keyboard/pxa27x_keypad.c
> +++ b/drivers/input/keyboard/pxa27x_keypad.c
> @@ -644,9 +644,12 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
> static int pxa27x_keypad_open(struct input_dev *dev)
> {
> struct pxa27x_keypad *keypad = input_get_drvdata(dev);
> -
> + int ret;
> /* Enable unit clock */
> - clk_prepare_enable(keypad->clk);
> + ret = clk_prepare_enable(keypad->clk);
> + if (ret)
> + return ret;
> +
> pxa27x_keypad_config(keypad);
>
> return 0;
> @@ -683,6 +686,7 @@ static int pxa27x_keypad_resume(struct device *dev)
> struct platform_device *pdev = to_platform_device(dev);
> struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
> struct input_dev *input_dev = keypad->input_dev;
> + int ret;
>
> /*
> * If the keypad is used as wake up source, the clock is not turned
> @@ -695,7 +699,11 @@ static int pxa27x_keypad_resume(struct device *dev)
>
> if (input_dev->users) {
> /* Enable unit clock */
> - clk_prepare_enable(keypad->clk);
> + ret = clk_prepare_enable(keypad->clk);
> + if (ret) {
> + mutex_unlock(&input_dev->mutex);
> + return ret;
> + }
> pxa27x_keypad_config(keypad);
> }

Rewrote as

int ret = 0;

...

mutex_lock(&input_dev->mutex);

if (input_dev->users) {
/* Enable unit clock */
ret = clk_prepare_enable(keypad->clk);
if (!ret)
pxa27x_keypad_config(keypad);
}

mutex_unlock(&input_dev->mutex);

...
return ret;

to avoid unlocking mutex in 2 places and applied, thanks.

--
Dmitry

2017-08-31 18:51:11

by Dmitry Torokhov

[permalink] [raw]
Subject: Re: [PATCH 1/2] Input: tegra-kbc: Handle return value of clk_prepare_enable.

On Tue, Aug 01, 2017 at 03:32:26PM +0530, Arvind Yadav wrote:
> clk_prepare_enable() can fail here and we must check its return value.
>
> Signed-off-by: Arvind Yadav <[email protected]>

Applied, thank you.

> ---
> drivers/input/keyboard/tegra-kbc.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
> index 0c07e10..edc1385 100644
> --- a/drivers/input/keyboard/tegra-kbc.c
> +++ b/drivers/input/keyboard/tegra-kbc.c
> @@ -370,8 +370,11 @@ static int tegra_kbc_start(struct tegra_kbc *kbc)
> {
> unsigned int debounce_cnt;
> u32 val = 0;
> + int ret;
>
> - clk_prepare_enable(kbc->clk);
> + ret = clk_prepare_enable(kbc->clk);
> + if (ret)
> + return ret;
>
> /* Reset the KBC controller to clear all previous status.*/
> reset_control_assert(kbc->rst);
> --
> 1.9.1
>

--
Dmitry