Remove the unused header drivers/scsi/pci2000.h
Signed-off-by: Richard Knutsson <[email protected]>
---
'grep -nr "pci2000"' on the whole tree results only in a reference to pci2000.h
Diffed against Linus' git-tree.
diff --git a/drivers/scsi/pci2000.h b/drivers/scsi/pci2000.h
deleted file mode 100644
index 0ebd8ce..0000000
--- a/drivers/scsi/pci2000.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2000 device driver for Linux.
- *
- * pci2000.h - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- * http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- * [email protected] Technical Support
- *
- ****************************************************************************/
-#ifndef _PCI2000_H
-#define _PCI2000_H
-
-#include <linux/types.h>
-
-#ifndef PSI_EIDE_SCSIOP
-#define PSI_EIDE_SCSIOP 1
-
-#define LINUXVERSION(v,p,s) (((v)<<16) + ((p)<<8) + (s))
-
-/************************************************/
-/* definition of standard data types */
-/************************************************/
-#define CHAR char
-#define UCHAR unsigned char
-#define SHORT short
-#define USHORT unsigned short
-#define BOOL long
-#define LONG long
-#define ULONG unsigned long
-#define VOID void
-
-typedef CHAR *PCHAR;
-typedef UCHAR *PUCHAR;
-typedef SHORT *PSHORT;
-typedef USHORT *PUSHORT;
-typedef BOOL *PBOOL;
-typedef LONG *PLONG;
-typedef ULONG *PULONG;
-typedef VOID *PVOID;
-
-
-/************************************************/
-/* Misc. macros */
-/************************************************/
-#define ANY2SCSI(up, p) \
-((UCHAR *)up)[0] = (((ULONG)(p)) >> 8); \
-((UCHAR *)up)[1] = ((ULONG)(p));
-
-#define SCSI2LONG(up) \
-( (((long)*(((UCHAR *)up))) << 16) \
-+ (((long)(((UCHAR *)up)[1])) << 8) \
-+ ((long)(((UCHAR *)up)[2])) )
-
-#define XANY2SCSI(up, p) \
-((UCHAR *)up)[0] = ((long)(p)) >> 24; \
-((UCHAR *)up)[1] = ((long)(p)) >> 16; \
-((UCHAR *)up)[2] = ((long)(p)) >> 8; \
-((UCHAR *)up)[3] = ((long)(p));
-
-#define XSCSI2LONG(up) \
-( (((long)(((UCHAR *)up)[0])) << 24) \
-+ (((long)(((UCHAR *)up)[1])) << 16) \
-+ (((long)(((UCHAR *)up)[2])) << 8) \
-+ ((long)(((UCHAR *)up)[3])) )
-
-/************************************************/
-/* SCSI CDB operation codes */
-/************************************************/
-#define SCSIOP_TEST_UNIT_READY 0x00
-#define SCSIOP_REZERO_UNIT 0x01
-#define SCSIOP_REWIND 0x01
-#define SCSIOP_REQUEST_BLOCK_ADDR 0x02
-#define SCSIOP_REQUEST_SENSE 0x03
-#define SCSIOP_FORMAT_UNIT 0x04
-#define SCSIOP_READ_BLOCK_LIMITS 0x05
-#define SCSIOP_REASSIGN_BLOCKS 0x07
-#define SCSIOP_READ6 0x08
-#define SCSIOP_RECEIVE 0x08
-#define SCSIOP_WRITE6 0x0A
-#define SCSIOP_PRINT 0x0A
-#define SCSIOP_SEND 0x0A
-#define SCSIOP_SEEK6 0x0B
-#define SCSIOP_TRACK_SELECT 0x0B
-#define SCSIOP_SLEW_PRINT 0x0B
-#define SCSIOP_SEEK_BLOCK 0x0C
-#define SCSIOP_PARTITION 0x0D
-#define SCSIOP_READ_REVERSE 0x0F
-#define SCSIOP_WRITE_FILEMARKS 0x10
-#define SCSIOP_FLUSH_BUFFER 0x10
-#define SCSIOP_SPACE 0x11
-#define SCSIOP_INQUIRY 0x12
-#define SCSIOP_VERIFY6 0x13
-#define SCSIOP_RECOVER_BUF_DATA 0x14
-#define SCSIOP_MODE_SELECT 0x15
-#define SCSIOP_RESERVE_UNIT 0x16
-#define SCSIOP_RELEASE_UNIT 0x17
-#define SCSIOP_COPY 0x18
-#define SCSIOP_ERASE 0x19
-#define SCSIOP_MODE_SENSE 0x1A
-#define SCSIOP_START_STOP_UNIT 0x1B
-#define SCSIOP_STOP_PRINT 0x1B
-#define SCSIOP_LOAD_UNLOAD 0x1B
-#define SCSIOP_RECEIVE_DIAGNOSTIC 0x1C
-#define SCSIOP_SEND_DIAGNOSTIC 0x1D
-#define SCSIOP_MEDIUM_REMOVAL 0x1E
-#define SCSIOP_READ_CAPACITY 0x25
-#define SCSIOP_READ 0x28
-#define SCSIOP_WRITE 0x2A
-#define SCSIOP_SEEK 0x2B
-#define SCSIOP_LOCATE 0x2B
-#define SCSIOP_WRITE_VERIFY 0x2E
-#define SCSIOP_VERIFY 0x2F
-#define SCSIOP_SEARCH_DATA_HIGH 0x30
-#define SCSIOP_SEARCH_DATA_EQUAL 0x31
-#define SCSIOP_SEARCH_DATA_LOW 0x32
-#define SCSIOP_SET_LIMITS 0x33
-#define SCSIOP_READ_POSITION 0x34
-#define SCSIOP_SYNCHRONIZE_CACHE 0x35
-#define SCSIOP_COMPARE 0x39
-#define SCSIOP_COPY_COMPARE 0x3A
-#define SCSIOP_WRITE_DATA_BUFF 0x3B
-#define SCSIOP_READ_DATA_BUFF 0x3C
-#define SCSIOP_CHANGE_DEFINITION 0x40
-#define SCSIOP_READ_SUB_CHANNEL 0x42
-#define SCSIOP_READ_TOC 0x43
-#define SCSIOP_READ_HEADER 0x44
-#define SCSIOP_PLAY_AUDIO 0x45
-#define SCSIOP_PLAY_AUDIO_MSF 0x47
-#define SCSIOP_PLAY_TRACK_INDEX 0x48
-#define SCSIOP_PLAY_TRACK_RELATIVE 0x49
-#define SCSIOP_PAUSE_RESUME 0x4B
-#define SCSIOP_LOG_SELECT 0x4C
-#define SCSIOP_LOG_SENSE 0x4D
-#define SCSIOP_MODE_SELECT10 0x55
-#define SCSIOP_MODE_SENSE10 0x5A
-#define SCSIOP_LOAD_UNLOAD_SLOT 0xA6
-#define SCSIOP_MECHANISM_STATUS 0xBD
-#define SCSIOP_READ_CD 0xBE
-
-// SCSI read capacity structure
-typedef struct _READ_CAPACITY_DATA
- {
- ULONG blks; /* total blocks (converted to little endian) */
- ULONG blksiz; /* size of each (converted to little endian) */
- } READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA;
-
-// SCSI inquiry data
-typedef struct _INQUIRYDATA
- {
- UCHAR DeviceType :5;
- UCHAR DeviceTypeQualifier :3;
- UCHAR DeviceTypeModifier :7;
- UCHAR RemovableMedia :1;
- UCHAR Versions;
- UCHAR ResponseDataFormat;
- UCHAR AdditionalLength;
- UCHAR Reserved[2];
- UCHAR SoftReset :1;
- UCHAR CommandQueue :1;
- UCHAR Reserved2 :1;
- UCHAR LinkedCommands :1;
- UCHAR Synchronous :1;
- UCHAR Wide16Bit :1;
- UCHAR Wide32Bit :1;
- UCHAR RelativeAddressing :1;
- UCHAR VendorId[8];
- UCHAR ProductId[16];
- UCHAR ProductRevisionLevel[4];
- UCHAR VendorSpecific[20];
- UCHAR Reserved3[40];
- } INQUIRYDATA, *PINQUIRYDATA;
-
-#endif
-
-// function prototypes
-int Pci2000_Detect (struct scsi_host_template *tpnt);
-int Pci2000_Command (Scsi_Cmnd *SCpnt);
-int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *));
-int Pci2000_Abort (Scsi_Cmnd *SCpnt);
-int Pci2000_Reset (Scsi_Cmnd *SCpnt, unsigned int flags);
-int Pci2000_Release (struct Scsi_Host *pshost);
-int Pci2000_BiosParam (struct scsi_device *sdev,
- struct block_device *bdev,
- sector_t capacity, int geom[]);
-
-#endif
On Tue, 1 May 2007, Richard Knutsson wrote:
> Remove the unused header drivers/scsi/pci2000.h
i have the same patch in my pending patch directory, dated march 10,
so i know i submitted it, but i have no idea whatever happened to it.
rday
--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA
http://fsdev.net/wiki/index.php?title=Main_Page
========================================================================
On Tue, 2007-05-01 at 14:16 -0400, Robert P. J. Day wrote:
> On Tue, 1 May 2007, Richard Knutsson wrote:
>
> > Remove the unused header drivers/scsi/pci2000.h
>
> i have the same patch in my pending patch directory, dated march 10,
> so i know i submitted it, but i have no idea whatever happened to it.
It's in -mm via this, pending merge with linus:
http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=commit;h=38891cb6b0de3f5986e6a7688c5ae17c18b000a9
James
James Bottomley wrote:
> On Tue, 2007-05-01 at 14:16 -0400, Robert P. J. Day wrote:
>
>> On Tue, 1 May 2007, Richard Knutsson wrote:
>>
>>
>>> Remove the unused header drivers/scsi/pci2000.h
>>>
>> i have the same patch in my pending patch directory, dated march 10,
>> so i know i submitted it, but i have no idea whatever happened to it.
>>
>
> It's in -mm via this, pending merge with linus:
>
> http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=commit;h=38891cb6b0de3f5986e6a7688c5ae17c18b000a9
>
Ok, thanks.
Richard Knutsson
Hello
We are mapping struct page ptrs from scattergather list entries using
kmap_atomic(page_ptr, KM_USER0) to get the virtual address for doing a
copy to work around some alignment restrictions in our driver.
If the first entry in the scatterlist has length > 4k (say 11k) and has
an offset of 1k then, will kmap of the struct page ptr in this
scattergather entry map all of the relevant pages (3 in this case for
11k) needed to cover this sg entry?
Thanks in advance.
-Hari