2007-05-11 19:46:54

by Simon Arlott

Subject: [PATCH] spelling fixes: arch/mips/

Spelling fixes in arch/mips/.

Signed-off-by: Simon Arlott <[email protected]>
---
arch/mips/arc/memory.c | 4 ++--
arch/mips/au1000/common/dbdma.c | 6 +++---
arch/mips/au1000/common/time.c | 2 +-
arch/mips/au1000/db1x00/board_setup.c | 4 ++--
arch/mips/au1000/mtx-1/board_setup.c | 2 +-
arch/mips/au1000/pb1200/board_setup.c | 2 +-
arch/mips/au1000/pb1550/board_setup.c | 2 +-
arch/mips/cobalt/setup.c | 4 ++--
arch/mips/ddb5xxx/common/prom.c | 4 ++--
arch/mips/ddb5xxx/ddb5477/lcd44780.c | 2 +-
arch/mips/ddb5xxx/ddb5477/setup.c | 2 +-
arch/mips/emma2rh/markeins/irq.c | 2 +-
arch/mips/gt64120/momenco_ocelot/setup.c | 4 ++--
arch/mips/jazz/jazzdma.c | 2 +-
arch/mips/jmr3927/rbhma3100/kgdb_io.c | 2 +-
arch/mips/kernel/binfmt_elfn32.c | 2 +-
arch/mips/kernel/cpu-bugs64.c | 2 +-
arch/mips/kernel/gdb-stub.c | 2 +-
arch/mips/kernel/irixelf.c | 2 +-
arch/mips/kernel/kspd.c | 2 +-
arch/mips/kernel/linux32.c | 2 +-
arch/mips/kernel/module.c | 2 +-
arch/mips/kernel/process.c | 4 ++--
arch/mips/kernel/semaphore.c | 2 +-
arch/mips/kernel/setup.c | 4 ++--
arch/mips/kernel/smtc.c | 4 ++--
arch/mips/kernel/traps.c | 2 +-
arch/mips/kernel/vpe.c | 2 +-
arch/mips/math-emu/cp1emu.c | 2 +-
arch/mips/math-emu/dp_mul.c | 2 +-
arch/mips/math-emu/dsemul.c | 2 +-
arch/mips/math-emu/sp_mul.c | 2 +-
arch/mips/mips-boards/generic/time.c | 4 ++--
arch/mips/mips-boards/sim/sim_time.c | 4 ++--
arch/mips/mm/c-r4k.c | 4 ++--
arch/mips/mm/c-sb1.c | 2 +-
arch/mips/mm/c-tx39.c | 2 +-
arch/mips/mm/sc-ip22.c | 2 +-
arch/mips/mm/tlbex.c | 6 +++---
arch/mips/oprofile/op_impl.h | 2 +-
arch/mips/pci/fixup-emma2rh.c | 2 +-
arch/mips/pci/ops-bridge.c | 2 +-
arch/mips/pci/pci-bcm1480.c | 2 +-
arch/mips/pci/pci-ddb5477.c | 2 +-
arch/mips/pci/pci-excite.c | 2 +-
arch/mips/pci/pci-ip27.c | 2 +-
arch/mips/pci/pci-ocelot-g.c | 2 +-
arch/mips/pmc-sierra/yosemite/i2c-yosemite.h | 2 +-
arch/mips/pmc-sierra/yosemite/smp.c | 2 +-
arch/mips/sgi-ip27/ip27-hubio.c | 2 +-
arch/mips/sibyte/sb1250/irq.c | 2 +-
arch/mips/sni/pcimt.c | 2 +-
arch/mips/tx4927/common/tx4927_irq.c | 4 ++--
arch/mips/tx4938/common/prom.c | 2 +-
arch/mips/vr41xx/common/cmu.c | 2 +-
55 files changed, 71 insertions(+), 71 deletions(-)

diff --git a/arch/mips/arc/memory.c b/arch/mips/arc/memory.c
index 83d1579..a12c356 100644
--- a/arch/mips/arc/memory.c
+++ b/arch/mips/arc/memory.c
@@ -9,7 +9,7 @@
* PROM library functions for acquiring/using memory descriptors given to us
* from the ARCS firmware. This is only used when CONFIG_ARC_MEMORY is set
* because on some machines like SGI IP27 the ARC memory configuration data
- * completly bogus and alternate easier to use mechanisms are available.
+ * completely bogus and alternate easier to use mechanisms are available.
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -27,7 +27,7 @@
#undef DEBUG

/*
- * For ARC firmware memory functions the unit of meassuring memory is always
+ * For ARC firmware memory functions the unit of measuring memory is always
* a 4k page of memory
*/
#define ARC_PAGE_SHIFT 12
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 626de44..9550981 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -240,7 +240,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
chan_tab_t *ctp;
au1x_dma_chan_t *cp;

- /* We do the intialization on the first channel allocation.
+ /* We do the initialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
* which can't be done successfully during board set up.
*/
@@ -551,7 +551,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
dp++;
}

- /* Make last descrptor point to the first.
+ /* Make last descriptor point to the first.
*/
dp--;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
@@ -976,7 +976,7 @@ au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
dp->dscr_source1 = dscr->dscr_source1;
dp->dscr_cmd1 = dscr->dscr_cmd1;
nbytes = dscr->dscr_cmd1;
- /* Allow the caller to specifiy if an interrupt is generated */
+ /* Allow the caller to specify if an interrupt is generated */
dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
ctp->chan_ptr->ddma_dbell = 0;
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index fa1c62f..ff7e99e 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -215,7 +215,7 @@ wakeup_counter0_set(int ticks)
* counter, if it exists. If we don't have an accurate processor
* speed, all of the peripherals that derive their clocks based on
* this advertised speed will introduce error and sometimes not work
- * properly. This function is futher convoluted to still allow configurations
+ * properly. This function is further convoluted to still allow configurations
* to do that in case they have really, really old silicon with a
* write-only PLL register, that we need the 32KHz when power management
* "wait" is enabled, and we need to detect if the 32KHz isn't present
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c
index 8b08edb..1d04a79 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/au1000/db1x00/board_setup.c
@@ -80,10 +80,10 @@ void __init board_setup(void)
/* set GPIO[210:208] instead of SSI_0 */
pin_func = au_readl(SYS_PINFUNC) | (u32)(1);

- /* set GPIO[215:211] for LED's */
+ /* set GPIO[215:211] for LEDs */
pin_func |= (u32)((5<<2));

- /* set GPIO[214:213] for more LED's */
+ /* set GPIO[214:213] for more LEDs */
pin_func |= (u32)((5<<12));

/* set GPIO[207:200] instead of PCMCIA/LCD */
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index 7bc5af8..2e268e8 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -99,7 +99,7 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
#endif

if (assert && devsel != 0) {
- // supress signal to cardbus
+ // suppress signal to cardbus
au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
}
else {
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
index 043302b..ec94c4f 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -69,7 +69,7 @@ void __init board_setup(void)
u32 pin_func;

#if 0
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ /* Enable PSC1 SYNC for AC97. Normally done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/au1000/pb1550/board_setup.c
index 05fd27d..77038f2 100644
--- a/arch/mips/au1000/pb1550/board_setup.c
+++ b/arch/mips/au1000/pb1550/board_setup.c
@@ -54,7 +54,7 @@ void __init board_setup(void)
{
u32 pin_func;

- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ /* Enable PSC1 SYNC for AC97. Normally done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index d0dd817..338aa20 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -63,8 +63,8 @@ void __init plat_timer_setup(struct irqaction *irq)

/*
* Cobalt doesn't have PS/2 keyboard/mouse interfaces,
- * keyboard conntroller is never used.
- * Also PCI-ISA bridge DMA contoroller is never used.
+ * keyboard controller is never used.
+ * Also PCI-ISA bridge DMA controller is never used.
*/
static struct resource cobalt_reserved_resources[] = {
{ /* dma1 */
diff --git a/arch/mips/ddb5xxx/common/prom.c b/arch/mips/ddb5xxx/common/prom.c
index 54a857b..05ab6b0 100644
--- a/arch/mips/ddb5xxx/common/prom.c
+++ b/arch/mips/ddb5xxx/common/prom.c
@@ -83,7 +83,7 @@ void ddb5477_runtime_detection(void)
around just after that.
*/

- /* We can only use the PCI bus to distinquish between
+ /* We can only use the PCI bus to distinguish between
the Rockhopper and RockhopperII backplanes and this must
wait until ddb5477_board_init() in setup.c after the 5477
is initialized. So, until then handle
@@ -105,7 +105,7 @@ void ddb5477_runtime_detection(void)
*test_offset = TESTVAL2;
if (*test_offset != TESTVAL2) {
/* OK, we couldn't set this value either, so it must
- definately be a BSB_VR0300 */
+ definitely be a BSB_VR0300 */
mips_machtype = MACH_NEC_ROCKHOPPER;
} else {
/* We could change the value twice, so it must be
diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.c b/arch/mips/ddb5xxx/ddb5477/lcd44780.c
index 9510b9a..6fd9e88 100644
--- a/arch/mips/ddb5xxx/ddb5477/lcd44780.c
+++ b/arch/mips/ddb5xxx/ddb5477/lcd44780.c
@@ -71,7 +71,7 @@ void lcd44780_puts(const char* s)
}
if (pos == 16) {
/* We have filled all 16 character positions, so stop
- outputing data */
+ outputting data */
break;
}
}
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
index f0cc0e8..23c730c 100644
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -350,7 +350,7 @@ static void __init ddb5477_board_init(void)

/*
* positive decode (bit6 -0)
- * enable IDE controler interrupt (bit 4 -1)
+ * enable IDE controller interrupt (bit 4 -1)
* setup SIRQ to point to IRQ 14 (bit 3:0 - 1101)
*/
pci_write_config_byte(&dev_m1533, 0x44, 0x1d);
diff --git a/arch/mips/emma2rh/markeins/irq.c b/arch/mips/emma2rh/markeins/irq.c
index 6bcf6a0..dd50753 100644
--- a/arch/mips/emma2rh/markeins/irq.c
+++ b/arch/mips/emma2rh/markeins/irq.c
@@ -93,7 +93,7 @@ void __init arch_init_irq(void)
/* disable interrupt */
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI);
- /* level triggerd */
+ /* level triggered */
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE);
emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI);
reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A);
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index 98b6fb3..73528ee 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -187,7 +187,7 @@ void __init plat_mem_setup(void)
GT_WRITE(GT_PCI0M1LD_OFS, 0x36000000 >> 21);

/* For the initial programming, we assume 512MB configuration */
- /* Relocate the CPU's view of the RAM... */
+ /* Relocate the CPUs view of the RAM... */
GT_WRITE(GT_SCS10LD_OFS, 0);
GT_WRITE(GT_SCS10HD_OFS, 0x0fe00000 >> 21);
GT_WRITE(GT_SCS32LD_OFS, 0x10000000 >> 21);
@@ -239,7 +239,7 @@ void __init plat_mem_setup(void)
switch(tmpword &3) {
case 3:
/* 512MiB */
- /* Decoders are allready set -- just add the
+ /* Decoders are already set -- just add the
* appropriate region */
add_memory_region( 0x40<<20, 0xC0<<20, BOOT_MEM_RAM);
add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM);
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index e8e0ffb..a186963 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -177,7 +177,7 @@ EXPORT_SYMBOL(vdma_alloc);
/*
* Free previously allocated dma translation pages
* Note that this does NOT change the translation table,
- * it just marks the free'd pages as unused!
+ * it just marks the freed pages as unused!
*/
int vdma_free(unsigned long laddr)
{
diff --git a/arch/mips/jmr3927/rbhma3100/kgdb_io.c b/arch/mips/jmr3927/rbhma3100/kgdb_io.c
index 2604f2c..264e99e 100644
--- a/arch/mips/jmr3927/rbhma3100/kgdb_io.c
+++ b/arch/mips/jmr3927/rbhma3100/kgdb_io.c
@@ -70,7 +70,7 @@ unsigned char getDebugChar(void)
debugInit(38400);
}

- /* diable RX int. */
+ /* disable RX int. */
dicr = tx3927_sioptr(0)->dicr;
tx3927_sioptr(0)->dicr = 0;

diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 9b34238..77db347 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -98,7 +98,7 @@ static __inline__ void
jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
{
/*
- * Convert jiffies to nanoseconds and seperate with
+ * Convert jiffies to nanoseconds and separate with
* one divide.
*/
u64 nsec = (u64)jiffies * TICK_NSEC;
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index c09337b..29435fe 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -64,7 +64,7 @@ static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
: "0" (5), "1" (8), "2" (5));
align_mod(align, mod);
/*
- * The trailing nop is needed to fullfill the two-instruction
+ * The trailing nop is needed to fulfill the two-instruction
* requirement between reading hi/lo and staring a mult/div.
* Leaving it out may cause gas insert a nop itself breaking
* the desired alignment of the next chunk.
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index 7bc8820..c9d9c14 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -116,7 +116,7 @@
* (gdb) target remote /dev/ttyS1
* ...at this point you are connected to
* the remote target and can use gdb
- * in the normal fasion. Setting
+ * in the normal fashion. Setting
* breakpoints, single stepping,
* printing variables, etc.
*/
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 403d96f..03cc100 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -421,7 +421,7 @@ static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm)
/* XXX Don't support N32 or 64bit binaries yet because they can
* XXX and do execute 64 bit instructions and expect all registers
* XXX to be 64 bit as well. We need to make the kernel save
- * XXX all registers as 64bits on cpu's capable of this at
+ * XXX all registers as 64bits on CPUs capable of this at
* XXX exception time plus frob the XTLB exception vector.
*/
if ((ehp->e_flags & EF_MIPS_ABI2))
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index c658001..953898c 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -222,7 +222,7 @@ void sp_work_handle_request(void)
}
}

- /* Run the syscall at the priviledge of the user who loaded the
+ /* Run the syscall at the privilege of the user who loaded the
SP program */

if (vpe_getuid(SP_VPE))
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 37849ed..842ce03 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -383,7 +383,7 @@ sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth)
#ifdef CONFIG_MIPS32_N32
asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
{
- /* compat_sys_semctl expects a pointer to union semun */
+ /* compat_sys_semctl expects a pointer to union semnum */
u32 __user *uptr = compat_alloc_user_space(sizeof(u32));
if (put_user(arg, uptr))
return -EFAULT;
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index cb08014..e7ed0ac 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -381,7 +381,7 @@ const struct exception_table_entry *search_module_dbetables(unsigned long addr)
return e;
}

-/* Put in dbe list if neccessary. */
+/* Put in dbe list if necessary. */
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 6bdfb5a..07688de 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -311,7 +311,7 @@ static int get_frame_info(struct mips_frame_info *info)
return 0;
if (info->pc_offset < 0) /* leaf */
return 1;
- /* prologue seems boggus... */
+ /* prologue seems bogus... */
err:
return -1;
}
@@ -397,7 +397,7 @@ unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
if (!kallsyms_lookup_size_offset(pc, &size, &ofs))
return 0;
/*
- * Return ra if an exception occured at the first instruction
+ * Return ra if an exception occurred at the first instruction
*/
if (unlikely(ofs == 0)) {
pc = *ra;
diff --git a/arch/mips/kernel/semaphore.c b/arch/mips/kernel/semaphore.c
index 1265358..b363604 100644
--- a/arch/mips/kernel/semaphore.c
+++ b/arch/mips/kernel/semaphore.c
@@ -33,7 +33,7 @@
* return old_count;
*
* On machines without lld/scd we need a spinlock to make the manipulation of
- * sem->count and sem->waking atomic. Scalability isn't an issue because
+ * sem->count and sem->waking atomic. Scalibility isn't an issue because
* this lock is used on UP only so it's just an empty variable.
*/
static inline int __sem_update_count(struct semaphore *sem, int incr)
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 4975da0..5bfbc01 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -395,13 +395,13 @@ static void __init bootmem_init(void)
#endif /* CONFIG_SGI_IP27 */

/*
- * arch_mem_init - initialize memory managment subsystem
+ * arch_mem_init - initialize memory management subsystem
*
* o plat_mem_setup() detects the memory configuration and will record detected
* memory areas using add_memory_region.
*
* At this stage the memory configuration of the system is known to the
- * kernel but generic memory managment system is still entirely uninitialized.
+ * kernel but generic memory management system is still entirely uninitialized.
*
* o bootmem_init()
* o sparse_init()
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index b361edb..cca40e7 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -64,7 +64,7 @@ asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
unsigned int ipi_timer_latch[NR_CPUS];

/*
- * Number of InterProcessor Interupt (IPI) message buffers to allocate
+ * Number of InterProcessor Interrupt (IPI) message buffers to allocate
*/

#define IPIBUF_PER_CPU 4
@@ -1284,7 +1284,7 @@ void smtc_flush_tlb_asid(unsigned long asid)
if ((ehi & ASID_MASK) == asid) {
/*
* Invalidate only entries with specified ASID,
- * makiing sure all entries differ.
+ * making sure all entries differ.
*/
write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
write_c0_entrylo0(0);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index ff45a4b..c29dbc7 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1433,7 +1433,7 @@ void __init trap_init(void)

/*
* Copy the generic exception handlers to their final destination.
- * This will be overriden later as suitable for a particular
+ * This will be overridden later as suitable for a particular
* configuration.
*/
set_handler(0x180, &except_vec3_generic, 0x80);
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index c9ee9d2..affa2b7 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -19,7 +19,7 @@
* VPE support module
*
* Provides support for loading a MIPS SP program on VPE1.
- * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
+ * The SP environment is rather simple, no tlb's. It needs to be relocatable
* (or partially linked). You should initialise your stack in the startup
* code. This loader looks for the symbol __start and sets up
* execution to resume from there. The MIPS SDE kit contains suitable examples.
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 80531b3..266020a 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -741,7 +741,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
if (MIPSInst_FUNC(ir) != pfetch_op) {
return SIGILL;
}
- /* ignore prefx operation */
+ /* ignore prefix operation */
break;

default:
diff --git a/arch/mips/math-emu/dp_mul.c b/arch/mips/math-emu/dp_mul.c
index f237390..ba2f9d0 100644
--- a/arch/mips/math-emu/dp_mul.c
+++ b/arch/mips/math-emu/dp_mul.c
@@ -117,7 +117,7 @@ ieee754dp ieee754dp_mul(ieee754dp x, ieee754dp y)
xm <<= 64 - (DP_MBITS + 1);
ym <<= 64 - (DP_MBITS + 1);

- /* multiply 32bits xm,ym to give high 32bits rm with stickness
+ /* multiply 32bits xm,ym to give high 32bits rm with stickiness
*/

/* 32 * 32 => 64 */
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index ea6ba72..78f5609 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -35,7 +35,7 @@
* According to the spec:
* 1) it shouldnt be a branch :-)
* 2) it can be a COP instruction :-(
- * 3) if we are tring to run a protected memory space we must take
+ * 3) if we are trying to run a protected memory space we must take
* special care on memory access instructions :-(
*/

diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c
index 3f070f8..b610aad 100644
--- a/arch/mips/math-emu/sp_mul.c
+++ b/arch/mips/math-emu/sp_mul.c
@@ -118,7 +118,7 @@ ieee754sp ieee754sp_mul(ieee754sp x, ieee754sp y)
xm <<= 32 - (SP_MBITS + 1);
ym <<= 32 - (SP_MBITS + 1);

- /* multiply 32bits xm,ym to give high 32bits rm with stickness
+ /* multiply 32bits xm,ym to give high 32bits rm with stickiness
*/
{
unsigned short lxm = xm & 0xffff;
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index df2a2bd..238c195 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -175,7 +175,7 @@ irqreturn_t mips_timer_interrupt(int irq, void *dev_id)
/*
* FIXME: need to cope with counter underflow.
* More support needs to be added to kernel/time for
- * counter/timer interrupts on multiple CPU's
+ * counter/timer interrupts on multiple CPUs
*/
write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));

@@ -289,7 +289,7 @@ void __init plat_timer_setup(struct irqaction *irq)

#ifdef CONFIG_SMP
/* irq_desc(riptor) is a global resource, when the interrupt overlaps
- on seperate cpu's the first one tries to handle the second interrupt.
+ on separate CPUs the first one tries to handle the second interrupt.
The effect is that the int remains disabled on the second cpu.
Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c
index d3a21c7..3f382b4 100644
--- a/arch/mips/mips-boards/sim/sim_time.c
+++ b/arch/mips/mips-boards/sim/sim_time.c
@@ -44,7 +44,7 @@ irqreturn_t sim_timer_interrupt(int irq, void *dev_id)
/*
* FIXME: need to cope with counter underflow.
* More support needs to be added to kernel/time for
- * counter/timer interrupts on multiple CPU's
+ * counter/timer interrupts on multiple CPUs
*/
write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
}
@@ -193,7 +193,7 @@ void __init plat_timer_setup(struct irqaction *irq)

#ifdef CONFIG_SMP
/* irq_desc(riptor) is a global resource, when the interrupt overlaps
- on seperate cpu's the first one tries to handle the second interrupt.
+ on separate CPUs the first one tries to handle the second interrupt.
The effect is that the int remains disabled on the second cpu.
Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
irq_desc[mips_cpu_timer_irq].flags |= IRQ_PER_CPU;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index df04a31..4c1e4df 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -426,7 +426,7 @@ static inline void local_r4k_flush_cache_page(void *args)
pte_t *ptep;

/*
- * If ownes no valid ASID yet, cannot possibly have gotten
+ * If we have no valid ASID yet, we cannot possibly have got
* this page into the cache.
*/
if (cpu_context(smp_processor_id(), mm) == 0)
@@ -1049,7 +1049,7 @@ static void __init setup_scache(void)
/*
* Do the probing thing on R4000SC and R4400SC processors. Other
* processors don't have a S-cache that would be relevant to the
- * Linux memory managment.
+ * Linux memory management.
*/
switch (c->cputype) {
case CPU_R4000SC:
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index 9ea460b..1475c15 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -134,7 +134,7 @@ static inline void __sb1_writeback_inv_dcache_range(unsigned long start,

/*
* Writeback and invalidate a range of the dcache. With physical
- * addresseses, we don't have to worry about possible bit 12 aliasing.
+ * addresses, we don't have to worry about possible bit 12 aliasing.
* XXXKW is it worth turning on KX and using hit ops with xkphys?
*/
static inline void __sb1_writeback_inv_dcache_phys_range(unsigned long start,
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index 560a6de..feeba1b 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -166,7 +166,7 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page
pte_t *ptep;

/*
- * If ownes no valid ASID yet, cannot possibly have gotten
+ * If we have no valid ASID yet, we cannot possibly have got
* this page into the cache.
*/
if (cpu_context(smp_processor_id(), mm) == 0)
diff --git a/arch/mips/mm/sc-ip22.c b/arch/mips/mm/sc-ip22.c
index d236cf8..59a46a0 100644
--- a/arch/mips/mm/sc-ip22.c
+++ b/arch/mips/mm/sc-ip22.c
@@ -159,7 +159,7 @@ static inline int __init indy_sc_probe(void)
return 1;
}

-/* XXX Check with wje if the Indy caches can differenciate between
+/* XXX Check with wje if the Indy caches can differentiate between
writeback + invalidate and just invalidate. */
struct bcache_ops indy_sc_ops = {
.bc_enable = indy_sc_enable,
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 492c518..db45f1c 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -10,7 +10,7 @@
* Copyright (C) 2006 Ralf Baechle ([email protected])
*
* ... and the days got worse and worse and now you see
- * I've gone completly out of my mind.
+ * I've gone completely out of my mind.
*
* They're coming to take me a away haha
* they're coming to take me a away hoho hihi haha
@@ -783,7 +783,7 @@ static void __init build_r3000_tlb_refill_handler(void)
* The R4000 TLB handler is much more complicated. We have two
* consecutive handler areas with 32 instructions space each.
* Since they aren't used at the same time, we can overflow in the
- * other one.To keep things simple, we first assume linear space,
+ * other one. To keep things simple, we first assume linear space,
* then we relocate it to the final handler layout as needed.
*/
static __initdata u32 final_handler[64];
@@ -830,7 +830,7 @@ static __init void __attribute__((unused)) build_tlb_probe_entry(u32 **p)

/*
* Write random or indexed TLB entry, and care about the hazards from
- * the preceeding mtc0 and for the following eret.
+ * the preceding mtc0 and for the following eret.
*/
enum tlb_write_entry { tlb_random, tlb_indexed };

diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
index fa6b4aa..82afd7c 100644
--- a/arch/mips/oprofile/op_impl.h
+++ b/arch/mips/oprofile/op_impl.h
@@ -25,7 +25,7 @@ struct op_counter_config {
unsigned long unit_mask;
};

-/* Per-architecture configury and hooks. */
+/* Per-architecture configuration and hooks. */
struct op_mips_model {
void (*reg_setup) (struct op_counter_config *);
void (*cpu_setup) (void * dummy);
diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
index 7abcfd1..fc01a48 100644
--- a/arch/mips/pci/fixup-emma2rh.c
+++ b/arch/mips/pci/fixup-emma2rh.c
@@ -1,6 +1,6 @@
/*
* arch/mips/pci/fixup-emma2rh.c
- * This file defines the PCI configration.
+ * This file defines the PCI configuration.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c
index 1fa0992..4d8cd68 100644
--- a/arch/mips/pci/ops-bridge.c
+++ b/arch/mips/pci/ops-bridge.c
@@ -19,7 +19,7 @@
* Therefore we use type 0 accesses for now even though they won't work
* correcly for PCI-to-PCI bridges.
*
- * The function is complicated by the ultimate brokeness of the IOC3 chip
+ * The function is complicated by the ultimate brokenness of the IOC3 chip
* which is used in SGI systems. The IOC3 can only handle 32-bit PCI
* accesses and does only decode parts of it's address space.
*/
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index d7b9e13..48b8e2e 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -207,7 +207,7 @@ static int __init bcm1480_pcibios_init(void)
PCIBIOS_MIN_IO = 0x00008000UL;
PCIBIOS_MIN_MEM = 0x01000000UL;

- /* Set I/O resource limits. - unlimited for now to accomodate HT */
+ /* Set I/O resource limits. - unlimited for now to accommodate HT */
ioport_resource.end = 0xffffffffUL;
iomem_resource.end = 0xffffffffUL;

diff --git a/arch/mips/pci/pci-ddb5477.c b/arch/mips/pci/pci-ddb5477.c
index d071bc3..d4cab9c 100644
--- a/arch/mips/pci/pci-ddb5477.c
+++ b/arch/mips/pci/pci-ddb5477.c
@@ -159,7 +159,7 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);

if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
- /* hack to distinquish overlapping slot 20s, one
+ /* hack to distinguish overlapping slot 20s, one
* on bus 0 (ALI USB on the M1535 on the backplane),
* and one on bus 2 (NEC USB controller on the CPU board)
* Make the M1535 USB - ISA IRQ number 9.
diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c
index 3c86c77..8a56876 100644
--- a/arch/mips/pci/pci-excite.c
+++ b/arch/mips/pci/pci-excite.c
@@ -131,7 +131,7 @@ static int __init basler_excite_pci_setup(void)
ocd_writel(0x00000000, bar + 0x100);
}

- /* Finally, enable the PCI interupt */
+ /* Finally, enable the PCI interrupt */
#if USB_IRQ > 7
set_c0_intcontrol(1 << USB_IRQ);
#else
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 405ce01..d64ec12 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -96,7 +96,7 @@ int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid)
bridge->b_int_device = 0x0;

/*
- * swap pio's to pci mem and io space (big windows)
+ * swap PIOs to pci mem and io space (big windows)
*/
bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
BRIDGE_CTRL_MEM_SWAP;
diff --git a/arch/mips/pci/pci-ocelot-g.c b/arch/mips/pci/pci-ocelot-g.c
index 1e34301..cffc684 100644
--- a/arch/mips/pci/pci-ocelot-g.c
+++ b/arch/mips/pci/pci-ocelot-g.c
@@ -16,7 +16,7 @@
/*
* We assume these address ranges have been programmed into the GT-64240 by
* the firmware. PMON in case of the Ocelot G does that. Note the size of
- * the I/O range is completly stupid; I/O mappings are limited to at most
+ * the I/O range is completely stupid; I/O mappings are limited to at most
* 256 bytes by the PCI spec and deprecated; and just to make things worse
* apparently many devices don't decode more than 64k of I/O space.
*/
diff --git a/arch/mips/pmc-sierra/yosemite/i2c-yosemite.h b/arch/mips/pmc-sierra/yosemite/i2c-yosemite.h
index 31c5523..66c3d37 100644
--- a/arch/mips/pmc-sierra/yosemite/i2c-yosemite.h
+++ b/arch/mips/pmc-sierra/yosemite/i2c-yosemite.h
@@ -38,7 +38,7 @@
#define TITAN_I2C_READ(offset) *(volatile unsigned long *)(TITAN_I2C_BASE + offset)


-/* Local constansts*/
+/* Local constansts */
#define TITAN_I2C_MAX_FILTER 15
#define TITAN_I2C_MAX_CLK 1023
#define TITAN_I2C_MAX_ARBF 15
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 305491e..466bcbb 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -136,7 +136,7 @@ void core_send_ipi(int cpu, unsigned int action)
* based on the action desired. An alternative strategy
* is to write to the Interrupt Set register, read the
* Interrupt Status register and clear the Interrupt
- * Clear register. The latter is preffered.
+ * Clear register. The latter is preferred.
*/
switch (action) {
case SMP_RESCHEDULE_YOURSELF:
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
index 524b371..8a96a5e 100644
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c
@@ -132,7 +132,7 @@ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
* XXX - There is a bug in the crossbow that link reset PIOs do not
* return write responses. The easiest solution to this problem is to
* leave widget 0 (xbow) in fire-and-forget mode at all times. This
- * only affects pio's to xbow registers, which should be rare.
+ * only affects PIOs to xbow registers, which should be rare.
**/
static void hub_set_piomode(nasid_t nasid)
{
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 0e6a13c..729e61c 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -287,7 +287,7 @@ int sb1250_steal_irq(int irq)
* On the second cpu, everything is set to IP5, which is
* ignored, EXCEPT the mailbox interrupt. That one is
* set to IP[2] so it is handled. This is needed so we
- * can do cross-cpu function calls, as requred by SMP
+ * can do cross-cpu function calls, as required by SMP
*/

#define IMR_IP2_VAL K_INT_MAP_I0
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index 9ee208d..6279141 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -211,7 +211,7 @@ static void pcimt_hwint1(void)
/*
* Note: ASIC PCI's builtin interrupt achknowledge feature is
* broken. Using it may result in loss of some or all i8259
- * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
+ * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
*/
irq = i8259_irq();
if (unlikely(irq < 0))
diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c
index 3d25d01..435048b 100644
--- a/arch/mips/tx4927/common/tx4927_irq.c
+++ b/arch/mips/tx4927/common/tx4927_irq.c
@@ -105,7 +105,7 @@ static const u32 tx4927_irq_debug_flag = (TX4927_IRQ_NONE
#endif

/*
- * Forwad definitions for all pic's
+ * Forward definitions for all PICs
*/

static void tx4927_irq_cp0_enable(unsigned int irq);
@@ -115,7 +115,7 @@ static void tx4927_irq_pic_enable(unsigned int irq);
static void tx4927_irq_pic_disable(unsigned int irq);

/*
- * Kernel structs for all pic's
+ * Kernel structs for all PICs
*/

#define TX4927_CP0_NAME "TX4927-CP0"
diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c
index 3189a65..e3f9026 100644
--- a/arch/mips/tx4938/common/prom.c
+++ b/arch/mips/tx4938/common/prom.c
@@ -104,7 +104,7 @@ tx4938_process_sdccr(u64 * addr)
msize = (((rs * cs * mw) / (1024 * 1024)) * (bc));

/* MVMCP -- bc hard coded to 4 from table 9.3.1 */
- /* boad supports bc=2 but no way to detect */
+ /* board supports bc=2 but no way to detect */

return (msize);
}
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index 657c513..7981ffc 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2001-2002 MontaVista Software Inc.
* Author: Yoichi Yuasa <[email protected] or [email protected]>
- * Copuright (C) 2003-2005 Yoichi Yuasa <[email protected]>
+ * Copyright (C) 2003-2005 Yoichi Yuasa <[email protected]>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
--
1.5.0.1

--
Simon Arlott

2007-05-11 19:57:07

by Simon Arlott

Subject: Re: [PATCH] spelling fixes: arch/mips/

On 11/05/07 20:42, Simon Arlott wrote:
> diff --git a/arch/mips/kernel/semaphore.c b/arch/mips/kernel/semaphore.c
> index 1265358..b363604 100644
> --- a/arch/mips/kernel/semaphore.c
> +++ b/arch/mips/kernel/semaphore.c
> @@ -33,7 +33,7 @@
> * return old_count;
> *
> * On machines without lld/scd we need a spinlock to make the
> manipulation of
> - * sem->count and sem->waking atomic. Scalability isn't an issue because
> + * sem->count and sem->waking atomic. Scalibility isn't an issue because
> * this lock is used on UP only so it's just an empty variable.
> */
> static inline int __sem_update_count(struct semaphore *sem, int incr)

I thought I'd reverted that mistake... it was correct already, too many
"capability" fixes confusing me :/

--
Simon Arlott