My sis630 chipset shipped with Asus A1000
doesn't work properly with suspend with ide drivers
(http://bugzilla.kernel.org/show_bug.cgi?id=7077)
i tried to switch to libata but i cannot boot.
I've enabled generic ide and sis specific code, both in-kernel. of
course scsi too.
when i boot i get: irq #14 nobody cared and stop
i have to remove battery to reboot pc.
I'm using 2.6.22.5, but i never got any libata kernel working.
Patrizio
ps. i'm writing from my desktop as i'm doing hardware mainteinance on
the laptop and could not boot it
Please CC me.
lspci:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
Bridge)
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
PCI Fast Ethernet (rev 80)
00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
SiS PCI Audio Accelerator (rev 01)
00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
Controller (rev a0)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
PCI-to-PCI bridge (AGP)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
630/730 PCI/AGP VGA Display Adapter (rev 11)
Hi,
[Adding IDE wizards to CC]
On 26/08/07, Patrizio Bassi <[email protected]> wrote:
> My sis630 chipset shipped with Asus A1000
> doesn't work properly with suspend with ide drivers
> (http://bugzilla.kernel.org/show_bug.cgi?id=7077)
>
> i tried to switch to libata but i cannot boot.
> I've enabled generic ide and sis specific code, both in-kernel. of
> course scsi too.
>
> when i boot i get: irq #14 nobody cared and stop
>
> i have to remove battery to reboot pc.
> I'm using 2.6.22.5, but i never got any libata kernel working.
>
> Patrizio
>
> ps. i'm writing from my desktop as i'm doing hardware mainteinance on
> the laptop and could not boot it
>
> Please CC me.
>
> lspci:
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
> Bridge)
> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
> PCI Fast Ethernet (rev 80)
> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> Controller (rev 07)
> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
> Controller (rev 07)
> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
> SiS PCI Audio Accelerator (rev 01)
> 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
> Controller (rev a0)
> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
> PCI-to-PCI bridge (AGP)
> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
> 630/730 PCI/AGP VGA Display Adapter (rev 11)
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
Patrizio Bassi ha scritto:
> Michal Piotrowski ha scritto:
>> Hi,
>>
>> [Adding IDE wizards to CC]
>>
>> On 26/08/07, Patrizio Bassi <[email protected]> wrote:
>>
>>> My sis630 chipset shipped with Asus A1000
>>> doesn't work properly with suspend with ide drivers
>>> (http://bugzilla.kernel.org/show_bug.cgi?id=7077)
>>>
>>> i tried to switch to libata but i cannot boot.
>>> I've enabled generic ide and sis specific code, both in-kernel. of
>>> course scsi too.
>>>
>>> when i boot i get: irq #14 nobody cared and stop
>>>
>>> i have to remove battery to reboot pc.
>>> I'm using 2.6.22.5, but i never got any libata kernel working.
>>>
>>> Patrizio
>>>
>>> ps. i'm writing from my desktop as i'm doing hardware mainteinance on
>>> the laptop and could not boot it
>>>
>>> Please CC me.
>>>
>>> lspci:
>>> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
>>> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
>>> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
>>> Bridge)
>>> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
>>> PCI Fast Ethernet (rev 80)
>>> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>> Controller (rev 07)
>>> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>> Controller (rev 07)
>>> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
>>> SiS PCI Audio Accelerator (rev 01)
>>> 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
>>> Controller (rev a0)
>>> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
>>> PCI-to-PCI bridge (AGP)
>>> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
>>> 630/730 PCI/AGP VGA Display Adapter (rev 11)
>>>
>>
>> Regards,
>> Michal
>>
>>
>
>
i've been out for a week, but found no notice, did i lost any email or
no activity on this issue?
Patrizio
> i've been out for a week, but found no notice, did i lost any email or
> no activity on this issue?
I tagged it onto the obscure IDE report pile. It doesn't contain any
really useful information and its probably not an IDE layer bug as of
itself. But its on the todo list for further investigation and to see if
patterns emerge
On Sep 2 2007 11:40, Alan Cox wrote:
>
>> i've been out for a week, but found no notice, did i lost any email or
>> no activity on this issue?
>
>I tagged it onto the obscure IDE report pile. It doesn't contain any
>really useful information and its probably not an IDE layer bug as of
>itself. But its on the todo list for further investigation and to see if
>patterns emerge
I shall give this a spin too, since I happen to have sis5513.
Jan
--
Jan Engelhardt ha scritto:
> On Sep 2 2007 11:40, Alan Cox wrote:
>
>>> i've been out for a week, but found no notice, did i lost any email or
>>> no activity on this issue?
>>>
>> I tagged it onto the obscure IDE report pile. It doesn't contain any
>> really useful information and its probably not an IDE layer bug as of
>> itself. But its on the todo list for further investigation and to see if
>> patterns emerge
>>
>
> I shall give this a spin too, since I happen to have sis5513.
>
>
oops i just noticed i made a typo in the subject...5513 for me too
Patrizio
>On Sep 2 2007 11:40, Alan Cox wrote:
>>
>>> i've been out for a week, but found no notice, did i lost any email or
>>> no activity on this issue?
>>
>>I tagged it onto the obscure IDE report pile. It doesn't contain any
>>really useful information and its probably not an IDE layer bug as of
>>itself. But its on the todo list for further investigation and to see if
>>patterns emerge
>
>I shall give this a spin too, since I happen to have sis5513.
Just booted this fresh ata-enabled system (a matter of mkinitrd). It has
not exploded yet.
Jan
--
On Sep 8 2007 11:38, Patrizio Bassi wrote:
>Jan Engelhardt wrote:
>>
>> I shall give this a spin too, since I happen to have sis5513.
>>
>> Just booted this fresh ata-enabled system (a matter of mkinitrd). It has
>>not exploded yet.
>
>don't you have the "irq 14" issue?
No, does not seem so.
>can you post here your .config?
http://rafb.net/p/vfTX0966.html
Maybe it is solved in 2.6.22.3? (I don't remember what your version
was.)
Jan
--
Jan Engelhardt ha scritto:
> On Sep 8 2007 11:38, Patrizio Bassi wrote:
>
>> Jan Engelhardt wrote:
>>
>>> I shall give this a spin too, since I happen to have sis5513.
>>>
>>> Just booted this fresh ata-enabled system (a matter of mkinitrd). It has
>>> not exploded yet.
>>>
>> don't you have the "irq 14" issue?
>>
>
> No, does not seem so.
>
>
>> can you post here your .config?
>>
>
> http://rafb.net/p/vfTX0966.html
>
> Maybe it is solved in 2.6.22.3? (I don't remember what your version
> was.)
>
>
> Jan
>
For Alan, libata devs...hope can help debug...
this is http://www.patriziobassi.it/downloads/libata_issue.jpg
and this is the relative config i'm using
http://www.patriziobassi.it/downloads/config
Let me know
Patrizio
Patrizio Bassi ha scritto:
> Jan Engelhardt ha scritto:
>> On Sep 8 2007 11:38, Patrizio Bassi wrote:
>>
>>> Jan Engelhardt wrote:
>>>
>>>> I shall give this a spin too, since I happen to have sis5513.
>>>>
>>>> Just booted this fresh ata-enabled system (a matter of mkinitrd).
It has
>>>> not exploded yet.
>>>>
>>> don't you have the "irq 14" issue?
>>>
>> No, does not seem so.
>>
>>
>>> can you post here your .config?
>>>
>> http://rafb.net/p/vfTX0966.html
>>
>> Maybe it is solved in 2.6.22.3? (I don't remember what your version
>> was.)
>>
>>
>> Jan
>>
>
> For Alan, libata devs...hope can help debug...
> this is http://www.patriziobassi.it/downloads/libata_issue.jpg
>
> and this is the relative config i'm using
> http://www.patriziobassi.it/downloads/config
>
> Let me know
>
> Patrizio
more debug:
I tried as suggested with the irqpoll option, i just get a faster panic
as i don't have the 3 xfermode lines...but always impossibile to boot...
Patrizio
On Sun, 09 Sep 2007 13:35:26 +0200
Patrizio Bassi <[email protected]> wrote:
> Patrizio Bassi ha scritto:
> > Jan Engelhardt ha scritto:
> >> On Sep 8 2007 11:38, Patrizio Bassi wrote:
> >>
> >>> Jan Engelhardt wrote:
> >>>
> >>>> I shall give this a spin too, since I happen to have sis5513.
> >>>>
> >>>> Just booted this fresh ata-enabled system (a matter of mkinitrd).
> It has
> >>>> not exploded yet.
> >>>>
> >>> don't you have the "irq 14" issue?
> >>>
> >> No, does not seem so.
> >>
> >>
> >>> can you post here your .config?
> >>>
> >> http://rafb.net/p/vfTX0966.html
> >>
> >> Maybe it is solved in 2.6.22.3? (I don't remember what your version
> >> was.)
> >>
> >>
> >> Jan
> >>
> >
> > For Alan, libata devs...hope can help debug...
> > this is http://www.patriziobassi.it/downloads/libata_issue.jpg
Looks more like a platform irq routing issue than an ata issue.
Perhaps an x86 or an acpi person can help out with this.
Probably nothing will happen, in which case I'll get back to you later
and ask you to raise a bugzilla entry, not that this will get it fixed :(
> > and this is the relative config i'm using
> > http://www.patriziobassi.it/downloads/config
> >
> > Let me know
> >
> > Patrizio
>
> more debug:
>
> I tried as suggested with the irqpoll option, i just get a faster panic
> as i don't have the 3 xfermode lines...but always impossibile to boot...
>
> Patrizio
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
On Sep 11 2007 15:46, Andrew Morton wrote:
>Patrizio Bassi <[email protected]> wrote:
>>Jan Engelhardt ha scritto:
>>>On Sep 8 2007 11:38, Patrizio Bassi wrote:
>>>>Jan Engelhardt wrote:
>>>>
>>>>> I shall give this a spin too, since I happen to have sis5513. Just
>>>>> booted this fresh ata-enabled system (a matter of mkinitrd). It has not
>>>>> exploded yet.
>>>>>
>>>> don't you have the "irq 14" issue?
>>>>
>>> No, does not seem so.
>>
>> For Alan, libata devs...hope can help debug...
>> this is http://www.patriziobassi.it/downloads/libata_issue.jpg
>
>Looks more like a platform irq routing issue than an ata issue.
>
>Perhaps an x86 or an acpi person can help out with this.
Patrizio, have you tried with the old IDE? (And without suspend at that...)
Jan
--
Jan Engelhardt ha scritto:
> On Sep 11 2007 15:46, Andrew Morton wrote:
>
>> Patrizio Bassi <[email protected]> wrote:
>>
>>> Jan Engelhardt ha scritto:
>>>
>>>> On Sep 8 2007 11:38, Patrizio Bassi wrote:
>>>>
>>>>> Jan Engelhardt wrote:
>>>>>
>>>>>
>>>>>> I shall give this a spin too, since I happen to have sis5513. Just
>>>>>> booted this fresh ata-enabled system (a matter of mkinitrd). It has not
>>>>>> exploded yet.
>>>>>>
>>>>>>
>>>>> don't you have the "irq 14" issue?
>>>>>
>>>>>
>>>> No, does not seem so.
>>>>
>>> For Alan, libata devs...hope can help debug...
>>> this is http://www.patriziobassi.it/downloads/libata_issue.jpg
>>>
>> Looks more like a platform irq routing issue than an ata issue.
>>
>> Perhaps an x86 or an acpi person can help out with this.
>>
>
> Patrizio, have you tried with the old IDE? (And without suspend at that...)
>
>
>
yes yes old IDE works ok, but the suspend functionality is broken....
so, as i compile scsi subsystem for usb-storage i wanted to move to the
new libata, but i found this issue...
Patrizio
On Sep 12 2007 20:49, Patrizio Bassi wrote:
>>>>
>>> Looks more like a platform irq routing issue than an ata issue.
>>>
>>> Perhaps an x86 or an acpi person can help out with this.
>>
>> Patrizio, have you tried with the old IDE? (And without suspend at that...)
>
>yes yes old IDE works ok, but the suspend functionality is broken....
Well, that is a starting point. Now it is time for some ide dev :)
Jan
--
Hi,
On Wednesday 12 September 2007, Patrizio Bassi wrote:
> Jan Engelhardt ha scritto:
> > On Sep 11 2007 15:46, Andrew Morton wrote:
> >
> >> Patrizio Bassi <[email protected]> wrote:
> >>
> >>> Jan Engelhardt ha scritto:
> >>>
> >>>> On Sep 8 2007 11:38, Patrizio Bassi wrote:
> >>>>
> >>>>> Jan Engelhardt wrote:
> >>>>>
> >>>>>
> >>>>>> I shall give this a spin too, since I happen to have sis5513. Just
> >>>>>> booted this fresh ata-enabled system (a matter of mkinitrd). It has not
> >>>>>> exploded yet.
> >>>>>>
> >>>>>>
> >>>>> don't you have the "irq 14" issue?
> >>>>>
> >>>>>
> >>>> No, does not seem so.
> >>>>
> >>> For Alan, libata devs...hope can help debug...
> >>> this is http://www.patriziobassi.it/downloads/libata_issue.jpg
> >>>
> >> Looks more like a platform irq routing issue than an ata issue.
> >>
> >> Perhaps an x86 or an acpi person can help out with this.
> >>
> >
> > Patrizio, have you tried with the old IDE? (And without suspend at that...)
> >
> >
> >
>
> yes yes old IDE works ok, but the suspend functionality is broken....
> so, as i compile scsi subsystem for usb-storage i wanted to move to the
> new libata, but i found this issue...
w.r.t. to suspend problem (http://bugzilla.kernel.org/show_bug.cgi?id=7077):
please try latest -mm kernel, it contains many fixes for sis5513 host driver.
Thanks,
Bart
On 08/31/2007 06:20 PM, Patrizio Bassi wrote:
> Patrizio Bassi ha scritto:
>> Michal Piotrowski ha scritto:
>>> Hi,
>>>
>>> [Adding IDE wizards to CC]
>>>
>>> On 26/08/07, Patrizio Bassi <[email protected]> wrote:
>>>
>>>> My sis630 chipset shipped with Asus A1000
>>>> doesn't work properly with suspend with ide drivers
>>>> (http://bugzilla.kernel.org/show_bug.cgi?id=7077)
>>>>
>>>> i tried to switch to libata but i cannot boot.
>>>> I've enabled generic ide and sis specific code, both in-kernel. of
>>>> course scsi too.
>>>>
>>>> when i boot i get: irq #14 nobody cared and stop
>>>>
>>>> i have to remove battery to reboot pc.
>>>> I'm using 2.6.22.5, but i never got any libata kernel working.
>>>>
>>>> Patrizio
>>>>
>>>> ps. i'm writing from my desktop as i'm doing hardware mainteinance on
>>>> the laptop and could not boot it
>>>>
>>>> Please CC me.
>>>>
>>>> lspci:
>>>> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
>>>> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
>>>> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
>>>> Bridge)
>>>> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
>>>> PCI Fast Ethernet (rev 80)
>>>> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>>> Controller (rev 07)
>>>> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>>> Controller (rev 07)
>>>> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
>>>> SiS PCI Audio Accelerator (rev 01)
>>>> 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
>>>> Controller (rev a0)
>>>> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
>>>> PCI-to-PCI bridge (AGP)
>>>> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
>>>> 630/730 PCI/AGP VGA Display Adapter (rev 11)
>>>>
>>> Regards,
>>> Michal
>>>
>>>
>>
> i've been out for a week, but found no notice, did i lost any email or
> no activity on this issue?
>
I assume you tried the standard workarounds, like
pci=nommconf,nomsi
pci=noacpi
pci=biosirq
(one at at time, not all at once.)
Chuck Ebbert ha scritto:
> On 08/31/2007 06:20 PM, Patrizio Bassi wrote:
>
>> Patrizio Bassi ha scritto:
>>
>>> Michal Piotrowski ha scritto:
>>>
>>>> Hi,
>>>>
>>>> [Adding IDE wizards to CC]
>>>>
>>>> On 26/08/07, Patrizio Bassi <[email protected]> wrote:
>>>>
>>>>
>>>>> My sis630 chipset shipped with Asus A1000
>>>>> doesn't work properly with suspend with ide drivers
>>>>> (http://bugzilla.kernel.org/show_bug.cgi?id=7077)
>>>>>
>>>>> i tried to switch to libata but i cannot boot.
>>>>> I've enabled generic ide and sis specific code, both in-kernel. of
>>>>> course scsi too.
>>>>>
>>>>> when i boot i get: irq #14 nobody cared and stop
>>>>>
>>>>> i have to remove battery to reboot pc.
>>>>> I'm using 2.6.22.5, but i never got any libata kernel working.
>>>>>
>>>>> Patrizio
>>>>>
>>>>> ps. i'm writing from my desktop as i'm doing hardware mainteinance on
>>>>> the laptop and could not boot it
>>>>>
>>>>> Please CC me.
>>>>>
>>>>> lspci:
>>>>> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
>>>>> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
>>>>> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
>>>>> Bridge)
>>>>> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
>>>>> PCI Fast Ethernet (rev 80)
>>>>> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>>>> Controller (rev 07)
>>>>> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>>>> Controller (rev 07)
>>>>> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
>>>>> SiS PCI Audio Accelerator (rev 01)
>>>>> 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
>>>>> Controller (rev a0)
>>>>> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
>>>>> PCI-to-PCI bridge (AGP)
>>>>> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>>> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>>> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
>>>>> 630/730 PCI/AGP VGA Display Adapter (rev 11)
>>>>>
>>>>>
>>>> Regards,
>>>> Michal
>>>>
>>>>
>>>>
>> i've been out for a week, but found no notice, did i lost any email or
>> no activity on this issue?
>>
>>
>
> I assume you tried the standard workarounds, like
>
> pci=nommconf,nomsi
> pci=noacpi
> pci=biosirq
>
> (one at at time, not all at once.)
>
>
>
i just fineshed to try (had an hardware problem, could not be faster)
but got no results :(
libata is unusable on my system.
i'll wait 2.6.23 to be out to try again.
--
Patrizio Bassi
http://www.patriziobassi.it
Chuck Ebbert ha scritto:
> On 08/31/2007 06:20 PM, Patrizio Bassi wrote:
>
>> Patrizio Bassi ha scritto:
>>
>>> Michal Piotrowski ha scritto:
>>>
>>>> Hi,
>>>>
>>>> [Adding IDE wizards to CC]
>>>>
>>>> On 26/08/07, Patrizio Bassi <[email protected]> wrote:
>>>>
>>>>
>>>>> My sis630 chipset shipped with Asus A1000
>>>>> doesn't work properly with suspend with ide drivers
>>>>> (http://bugzilla.kernel.org/show_bug.cgi?id=7077)
>>>>>
>>>>> i tried to switch to libata but i cannot boot.
>>>>> I've enabled generic ide and sis specific code, both in-kernel. of
>>>>> course scsi too.
>>>>>
>>>>> when i boot i get: irq #14 nobody cared and stop
>>>>>
>>>>> i have to remove battery to reboot pc.
>>>>> I'm using 2.6.22.5, but i never got any libata kernel working.
>>>>>
>>>>> Patrizio
>>>>>
>>>>> ps. i'm writing from my desktop as i'm doing hardware mainteinance on
>>>>> the laptop and could not boot it
>>>>>
>>>>> Please CC me.
>>>>>
>>>>> lspci:
>>>>> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
>>>>> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
>>>>> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
>>>>> Bridge)
>>>>> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
>>>>> PCI Fast Ethernet (rev 80)
>>>>> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>>>> Controller (rev 07)
>>>>> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>>>> Controller (rev 07)
>>>>> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
>>>>> SiS PCI Audio Accelerator (rev 01)
>>>>> 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
>>>>> Controller (rev a0)
>>>>> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
>>>>> PCI-to-PCI bridge (AGP)
>>>>> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>>> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>>> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
>>>>> 630/730 PCI/AGP VGA Display Adapter (rev 11)
>>>>>
>>>>>
>>>> Regards,
>>>> Michal
>>>>
>>>>
>>>>
>> i've been out for a week, but found no notice, did i lost any email or
>> no activity on this issue?
>>
>>
>
> I assume you tried the standard workarounds, like
>
> pci=nommconf,nomsi
> pci=noacpi
> pci=biosirq
>
> (one at at time, not all at once.)
>
>
>
I waited 2.6.23 to be out and tried again, but still no chance to get
libata working for my notebook.
Anything i can try?
---
Patrizio Bassi
http://www.patriziobassi.it
