Oct 12 09:40:54 rok kernel: [ 0.000000] Linux version 2.6.23-rt1 ([email protected]) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP PREEMPT RT Fri Oct 12 09:28:26 CEST 2007
Oct 12 09:40:54 rok kernel: [ 0.000000] Command line: ro root=/dev/VolGroup00/LogVol01 quiet vga=0x31a video=vesafb:ypan,mtrr:4
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 12 09:40:54 rok kernel: [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Oct 12 09:40:54 rok kernel: [ 0.000000] end_pfn_map = 1048576
Oct 12 09:40:54 rok kernel: [ 0.000000] DMI 2.3 present.
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: RSDP 000F7C80, 0014 (r0 ACPIAM)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: RSDT 3FFB0000, 0034 (r1 A M I OEMRSDT 12000521 MSFT 97)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 12000521 MSFT 97)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: DSDT 3FFB0450, 3CF4 (r1 75D8P 75D8P004 4 INTL 2002026)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: FACS 3FFC0000, 0040
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: APIC 3FFB0390, 0078 (r1 A M I OEMAPIC 12000521 MSFT 97)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: MCFG 3FFB0410, 003C (r1 A M I OEMMCFG 12000521 MSFT 97)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: OEMB 3FFC0040, 0046 (r1 A M I AMI_OEM 12000521 MSFT 97)
Oct 12 09:40:54 rok kernel: [ 0.000000] Zone PFN ranges:
Oct 12 09:40:54 rok kernel: [ 0.000000] DMA 0 -> 4096
Oct 12 09:40:54 rok kernel: [ 0.000000] DMA32 4096 -> 1048576
Oct 12 09:40:54 rok kernel: [ 0.000000] Normal 1048576 -> 1048576
Oct 12 09:40:54 rok kernel: [ 0.000000] Movable zone start PFN for each node
Oct 12 09:40:54 rok kernel: [ 0.000000] early_node_map[2] active PFN ranges
Oct 12 09:40:54 rok kernel: [ 0.000000] 0: 0 -> 159
Oct 12 09:40:54 rok kernel: [ 0.000000] 0: 256 -> 262064
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Oct 12 09:40:54 rok kernel: [ 0.000000] Processor #0 (Bootup-CPU)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Oct 12 09:40:54 rok kernel: [ 0.000000] Processor #1
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 12 09:40:54 rok kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
Oct 12 09:40:54 rok kernel: [ 0.000000] IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 12 09:40:54 rok kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Oct 12 09:40:54 rok kernel: [ 0.000000] Setting APIC routing to flat
Oct 12 09:40:54 rok kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Oct 12 09:40:54 rok kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
Oct 12 09:40:54 rok kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
Oct 12 09:40:54 rok kernel: [ 0.000000] PERCPU: Allocating 34952 bytes of per cpu data
Oct 12 09:40:54 rok kernel: [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Oct 12 09:40:54 rok kernel: [ 0.000000] Built 1 zonelists in Zone order. Total pages: 254463
Oct 12 09:40:54 rok kernel: [ 0.000000] Kernel command line: ro root=/dev/VolGroup00/LogVol01 quiet vga=0x31a video=vesafb:ypan,mtrr:4
Oct 12 09:40:54 rok kernel: [ 0.000000] Initializing CPU#0
Oct 12 09:40:54 rok kernel: [ 0.000000] WARNING: experimental RCU implementation.
Oct 12 09:40:54 rok kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Oct 12 09:40:54 rok kernel: [ 0.000000] TSC calibrated against PM_TIMER
Oct 12 09:40:54 rok kernel: [ 22.688824] time.c: Detected 3039.833 MHz processor.
Oct 12 09:40:54 rok kernel: [ 22.688879] Console: colour dummy device 80x25
Oct 12 09:40:54 rok kernel: [ 22.688883] console [tty0] enabled
Oct 12 09:40:54 rok kernel: [ 22.689963] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 12 09:40:54 rok kernel: [ 22.690641] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 12 09:40:54 rok kernel: [ 22.690744] Checking aperture...
Oct 12 09:40:54 rok kernel: [ 22.713134] Memory: 1011756k/1048256k available (3086k kernel code, 35504k reserved, 1346k data, 260k init)
Oct 12 09:40:54 rok kernel: [ 22.772575] Calibrating delay using timer specific routine.. 6085.07 BogoMIPS (lpj=3042538)
Oct 12 09:40:54 rok kernel: [ 22.772651] Mount-cache hash table entries: 256
Oct 12 09:40:54 rok kernel: [ 22.772835] CPU: Trace cache: 12K uops, L1 D cache: 16K
Oct 12 09:40:54 rok kernel: [ 22.772839] CPU: L2 cache: 2048K
Oct 12 09:40:54 rok kernel: [ 22.772842] using mwait in idle threads.
Oct 12 09:40:54 rok kernel: [ 22.772844] CPU: Physical Processor ID: 0
Oct 12 09:40:54 rok kernel: [ 22.772846] CPU: Processor Core ID: 0
Oct 12 09:40:54 rok kernel: [ 22.772860] CPU0: Thermal monitoring enabled (TM1)
Oct 12 09:40:54 rok kernel: [ 22.772879] SMP alternatives: switching to UP code
Oct 12 09:40:54 rok kernel: [ 22.773885] ACPI: Core revision 20070126
Oct 12 09:40:54 rok kernel: [ 22.787622] Using local APIC timer interrupts.
Oct 12 09:40:54 rok kernel: [ 22.820442] Detected 12.665 MHz APIC timer.
Oct 12 09:40:54 rok kernel: [ 22.820904] SMP alternatives: switching to SMP code
Oct 12 09:40:54 rok kernel: [ 22.821489] Booting processor 1/2 APIC 0x1
Oct 12 09:40:54 rok kernel: [ 23.498260] Initializing CPU#1
Oct 12 09:40:54 rok kernel: [ 23.558357] Calibrating delay using timer specific routine.. 6079.25 BogoMIPS (lpj=3039627)
Oct 12 09:40:54 rok kernel: [ 23.558372] CPU: Trace cache: 12K uops, L1 D cache: 16K
Oct 12 09:40:54 rok kernel: [ 23.558376] CPU: L2 cache: 2048K
Oct 12 09:40:54 rok kernel: [ 23.558379] CPU: Physical Processor ID: 0
Oct 12 09:40:54 rok kernel: [ 23.558381] CPU: Processor Core ID: 0
Oct 12 09:40:54 rok kernel: [ 23.558396] CPU1: Thermal monitoring enabled (TM1)
Oct 12 09:40:54 rok kernel: [ 23.558815] Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Oct 12 09:40:54 rok kernel: [ 22.892830] checking TSC synchronization [CPU#0 -> CPU#1]:
Oct 12 09:40:54 rok kernel: [ 22.912788] Measured 2029973107 cycles TSC warp between CPUs, turning off TSC clock.
Oct 12 09:40:54 rok kernel: [ 22.912793] Marking TSC unstable due to check_tsc_sync_source failed
Oct 12 09:40:54 rok kernel: [ 22.912874] Brought up 2 CPUs
Oct 12 09:40:54 rok kernel: [ 23.579626] NET: Registered protocol family 16
Oct 12 09:40:54 rok kernel: [ 23.579860] ACPI: bus type pci registered
Oct 12 09:40:54 rok kernel: [ 23.579990] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Oct 12 09:40:54 rok kernel: [ 23.579995] PCI: Not using MMCONFIG.
Oct 12 09:40:54 rok kernel: [ 23.579998] PCI: Using configuration type 1
Oct 12 09:40:54 rok kernel: [ 23.589104] ACPI: Interpreter enabled
Oct 12 09:40:54 rok kernel: [ 23.589108] ACPI: (supports S0 S1 S3 S5)
Oct 12 09:40:54 rok kernel: [ 23.589126] ACPI: Using IOAPIC for interrupt routing
Oct 12 09:40:54 rok kernel: [ 22.933624] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 12 09:40:54 rok kernel: [ 22.950008] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Oct 12 09:40:54 rok kernel: [ 22.950143] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Oct 12 09:40:54 rok kernel: [ 22.950262] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
Oct 12 09:40:54 rok kernel: [ 22.950378] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 12 09:40:54 rok kernel: [ 22.950497] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 12 09:40:54 rok kernel: [ 22.950615] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 12 09:40:54 rok kernel: [ 22.950738] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 12 09:40:54 rok kernel: [ 22.950858] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 12 09:40:54 rok kernel: [ 22.951025] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - C2, should be B5 [20070126]
Oct 12 09:40:54 rok kernel: [ 22.951032] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 12 09:40:54 rok kernel: [ 22.951076] pnp: PnP ACPI init
Oct 12 09:40:54 rok kernel: [ 22.951085] ACPI: bus type pnp registered
Oct 12 09:40:54 rok kernel: [ 22.955829] pnp: PnP ACPI: found 14 devices
Oct 12 09:40:54 rok kernel: [ 22.955832] ACPI: ACPI bus type pnp unregistered
Oct 12 09:40:54 rok kernel: [ 22.956098] SCSI subsystem initialized
Oct 12 09:40:54 rok kernel: [ 23.622499] PCI: Using ACPI for IRQ routing
Oct 12 09:40:54 rok kernel: [ 23.622504] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 12 09:40:54 rok kernel: [ 22.962809] Bluetooth: Core ver 2.11
Oct 12 09:40:54 rok kernel: [ 22.962914] NET: Registered protocol family 31
Oct 12 09:40:54 rok kernel: [ 22.962917] Bluetooth: HCI device and connection manager initialized
Oct 12 09:40:54 rok kernel: [ 22.962921] Bluetooth: HCI socket layer initialized
Oct 12 09:40:54 rok kernel: [ 22.962933] PCI-GART: No AMD northbridge found.
Oct 12 09:40:54 rok kernel: [ 22.963016] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Oct 12 09:40:54 rok kernel: [ 22.963022] hpet0: 3 32-bit timers, 14318180 Hz
Oct 12 09:40:54 rok kernel: [ 22.972330] pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
Oct 12 09:40:54 rok kernel: [ 22.972334] pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
Oct 12 09:40:54 rok kernel: [ 22.972345] pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
Oct 12 09:40:54 rok kernel: [ 22.972351] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
Oct 12 09:40:54 rok kernel: [ 22.972354] pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved
Oct 12 09:40:54 rok kernel: [ 22.972357] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
Oct 12 09:40:54 rok kernel: [ 22.972360] pnp: 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
Oct 12 09:40:54 rok kernel: [ 22.972886] PCI: Bridge: 0000:00:01.0
Oct 12 09:40:54 rok kernel: [ 22.972889] IO window: disabled.
Oct 12 09:40:55 rok kernel: [ 22.972894] MEM window: disabled.
Oct 12 09:40:55 rok kernel: [ 22.972897] PREFETCH window: disabled.
Oct 12 09:40:55 rok kernel: [ 22.972902] PCI: Bridge: 0000:00:02.0
Oct 12 09:40:55 rok kernel: [ 22.972904] IO window: disabled.
Oct 12 09:40:55 rok kernel: [ 22.972909] MEM window: f1e00000-fbefffff
Oct 12 09:40:55 rok kernel: [ 22.972914] PREFETCH window: cff00000-dfefffff
Oct 12 09:40:55 rok kernel: [ 22.972959] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
Oct 12 09:40:55 rok kernel: [ 22.972995] NET: Registered protocol family 2
Oct 12 09:40:55 rok kernel: [ 23.667287] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct 12 09:40:55 rok kernel: [ 23.667771] TCP established hash table entries: 32768 (order: 9, 2359296 bytes)
Oct 12 09:40:55 rok kernel: [ 23.669662] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes)
Oct 12 09:40:55 rok kernel: [ 23.671489] TCP: Hash tables configured (established 32768 bind 32768)
Oct 12 09:40:55 rok kernel: [ 23.671498] TCP reno registered
Oct 12 09:40:55 rok kernel: [ 23.017451] checking if image is initramfs... it is
Oct 12 09:40:55 rok kernel: [ 23.289644] Freeing initrd memory: 3673k freed
Oct 12 09:40:55 rok kernel: [ 23.960482] Total HugeTLB memory allocated, 0
Oct 12 09:40:55 rok kernel: [ 23.960678] VFS: Disk quotas dquot_6.5.1
Oct 12 09:40:55 rok kernel: [ 23.960691] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 12 09:40:55 rok kernel: [ 23.960861] io scheduler noop registered
Oct 12 09:40:55 rok kernel: [ 23.960863] io scheduler anticipatory registered
Oct 12 09:40:55 rok kernel: [ 23.960865] io scheduler deadline registered
Oct 12 09:40:55 rok kernel: [ 23.960881] io scheduler cfq registered (default)
Oct 12 09:40:55 rok kernel: [ 23.960896] PCI: VIA PCI bridge detected. Disabling DAC.
Oct 12 09:40:55 rok kernel: [ 23.962795] PCI: Bypassing VIA 8237 APIC De-Assert Message
Oct 12 09:40:55 rok kernel: [ 23.963117] assign_interrupt_mode Found MSI capability
Oct 12 09:40:55 rok kernel: [ 23.963497] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 5120k, total 131072k
Oct 12 09:40:55 rok kernel: [ 23.963501] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
Oct 12 09:40:55 rok kernel: [ 23.963503] vesafb: scrolling: redraw
Oct 12 09:40:55 rok kernel: [ 23.963506] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Oct 12 09:40:55 rok kernel: [ 23.603512] Console: switching to colour frame buffer device 160x64
Oct 12 09:40:55 rok kernel: [ 23.887632] fb0: VESA VGA frame buffer device
Oct 12 09:40:55 rok kernel: [ 23.887745] vga16fb: mapped to 0xffff8100000a0000
Oct 12 09:40:55 rok kernel: [ 23.887820] fb1: VGA16 VGA frame buffer device
Oct 12 09:40:55 rok kernel: [ 23.888192] input: Power Button (FF) as /devices/virtual/input/input0
Oct 12 09:40:55 rok kernel: [ 23.888195] ACPI: Power Button (FF) [PWRF]
Oct 12 09:40:55 rok kernel: [ 23.888318] input: Power Button (CM) as /devices/virtual/input/input1
Oct 12 09:40:55 rok kernel: [ 23.888321] ACPI: Power Button (CM) [PWRB]
Oct 12 09:40:55 rok kernel: [ 23.888703] ACPI: SSDT 3FFB4150, 02FC (r1 AMI CPU1PM 1 INTL 2002026)
Oct 12 09:40:55 rok kernel: [ 23.888999] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - AE, should be 57 [20070126]
Oct 12 09:40:55 rok kernel: [ 23.889007] ACPI: SSDT 3FFB4450, 02FC (r1 AMI CPU2PM 1 INTL 2002026)
Oct 12 09:40:55 rok kernel: [ 23.889185] ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
Oct 12 09:40:55 rok kernel: [ 23.889204] ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
Oct 12 09:40:55 rok kernel: [ 24.578384] Real Time Clock Driver v1.12ac
Oct 12 09:40:55 rok kernel: [ 24.578637] Linux agpgart interface v0.102
Oct 12 09:40:55 rok kernel: [ 24.578642] Serial: 8250/16550 driver $Revision: 1.90 $ 16 ports, IRQ sharing enabled
Oct 12 09:40:55 rok kernel: [ 24.578772] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 12 09:40:55 rok kernel: [ 24.580278] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 12 09:40:55 rok kernel: [ 24.580429] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
Oct 12 09:40:55 rok kernel: [ 24.580544] 0000:00:09.0: ttyS4 at I/O 0xd000 (irq = 17) is a 16550A
Oct 12 09:40:55 rok kernel: [ 24.580712] 0000:00:09.0: ttyS5 at I/O 0xcc00 (irq = 17) is a 16550A
Oct 12 09:40:55 rok kernel: [ 24.580876] 0000:00:09.0: ttyS6 at I/O 0xc480 (irq = 17) is a 16550A
Oct 12 09:40:55 rok kernel: [ 24.581158] 0000:00:09.0: ttyS7 at I/O 0xc400 (irq = 17) is a 16550A
Oct 12 09:40:55 rok kernel: [ 24.581327] 0000:00:09.0: ttyS8 at I/O 0xc080 (irq = 17) is a 16550A
Oct 12 09:40:55 rok kernel: [ 24.581490] 0000:00:09.0: ttyS9 at I/O 0xc000 (irq = 17) is a 16550A
Oct 12 09:40:55 rok kernel: [ 24.582519] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct 12 09:40:55 rok kernel: [ 24.582990] loop: module loaded
Oct 12 09:40:55 rok kernel: [ 23.916996] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Oct 12 09:40:55 rok kernel: [ 23.917034] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
Oct 12 09:40:55 rok kernel: [ 23.917213] eth0: VIA Rhine II at 0x1e800, 00:13:8f:27:34:8c, IRQ 23.
Oct 12 09:40:55 rok kernel: [ 23.917926] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Oct 12 09:40:55 rok kernel: [ 23.918292] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
Oct 12 09:40:55 rok kernel: [ 23.918299] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
Oct 12 09:40:55 rok kernel: [ 23.918366] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
Oct 12 09:40:55 rok kernel: [ 23.918663] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct 12 09:40:55 rok kernel: [ 23.919157] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 12 09:40:55 rok kernel: [ 23.919166] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 12 09:40:55 rok kernel: [ 23.919359] mice: PS/2 mouse device common for all mice
Oct 12 09:40:55 rok kernel: [ 23.937160] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Oct 12 09:40:55 rok kernel: [ 23.940915] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
Oct 12 09:40:55 rok kernel: [ 23.941047] Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
Oct 12 09:40:55 rok kernel: [ 23.941275] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
Oct 12 09:40:55 rok kernel: [ 24.761652] logips2pp: Detected unknown logitech mouse model 127
Oct 12 09:40:55 rok kernel: [ 24.453873] ALSA device list:
Oct 12 09:40:55 rok kernel: [ 24.453877] #0: VIA 8237 with ALC850 at 0xe400, irq 22
Oct 12 09:40:55 rok kernel: [ 24.453969] oprofile: using NMI interrupt.
Oct 12 09:40:55 rok kernel: [ 24.454030] TCP cubic registered
Oct 12 09:40:55 rok kernel: [ 24.454038] NET: Registered protocol family 1
Oct 12 09:40:55 rok kernel: [ 24.454044] NET: Registered protocol family 17
Oct 12 09:40:55 rok kernel: [ 25.121255] Freeing unused kernel memory: 260k freed
Oct 12 09:40:55 rok kernel: [ 25.216486] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input3
Oct 12 09:40:55 rok kernel: [ 25.398155] usbcore: registered new interface driver usbfs
Oct 12 09:40:55 rok kernel: [ 25.398215] usbcore: registered new interface driver hub
Oct 12 09:40:55 rok kernel: [ 24.732195] usbcore: registered new device driver usb
Oct 12 09:40:55 rok kernel: [ 25.400386] USB Universal Host Controller Interface driver v3.0
Oct 12 09:40:55 rok kernel: [ 25.400511] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
Oct 12 09:40:55 rok kernel: [ 25.400527] uhci_hcd 0000:00:10.0: UHCI Host Controller
Oct 12 09:40:55 rok kernel: [ 25.400642] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Oct 12 09:40:55 rok kernel: [ 24.734630] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ec00
Oct 12 09:40:55 rok kernel: [ 24.734809] usb usb1: configuration #1 chosen from 1 choice
Oct 12 09:40:55 rok kernel: [ 24.734849] hub 1-0:1.0: USB hub found
Oct 12 09:40:55 rok kernel: [ 24.734859] hub 1-0:1.0: 2 ports detected
Oct 12 09:40:55 rok kernel: [ 25.500943] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
Oct 12 09:40:55 rok kernel: [ 25.500954] uhci_hcd 0000:00:10.1: UHCI Host Controller
Oct 12 09:40:55 rok kernel: [ 25.500983] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Oct 12 09:40:55 rok kernel: [ 25.501006] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e080
Oct 12 09:40:55 rok kernel: [ 25.501144] usb usb2: configuration #1 chosen from 1 choice
Oct 12 09:40:55 rok kernel: [ 25.501184] hub 2-0:1.0: USB hub found
Oct 12 09:40:55 rok kernel: [ 25.501193] hub 2-0:1.0: 2 ports detected
Oct 12 09:40:55 rok kernel: [ 24.935581] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
Oct 12 09:40:55 rok kernel: [ 24.935590] uhci_hcd 0000:00:10.2: UHCI Host Controller
Oct 12 09:40:55 rok kernel: [ 24.935620] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Oct 12 09:40:55 rok kernel: [ 24.935644] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
Oct 12 09:40:55 rok kernel: [ 24.935785] usb usb3: configuration #1 chosen from 1 choice
Oct 12 09:40:55 rok kernel: [ 24.935823] hub 3-0:1.0: USB hub found
Oct 12 09:40:55 rok kernel: [ 24.935833] hub 3-0:1.0: 2 ports detected
Oct 12 09:40:55 rok kernel: [ 25.702440] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
Oct 12 09:40:55 rok kernel: [ 25.702450] uhci_hcd 0000:00:10.3: UHCI Host Controller
Oct 12 09:40:55 rok kernel: [ 25.702482] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Oct 12 09:40:55 rok kernel: [ 25.702507] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000dc00
Oct 12 09:40:55 rok kernel: [ 25.702652] usb usb4: configuration #1 chosen from 1 choice
Oct 12 09:40:55 rok kernel: [ 25.702689] hub 4-0:1.0: USB hub found
Oct 12 09:40:55 rok kernel: [ 25.702700] hub 4-0:1.0: 2 ports detected
Oct 12 09:40:55 rok kernel: [ 25.706293] usb 1-1: new full speed USB device using uhci_hcd and address 2
Oct 12 09:40:55 rok kernel: [ 25.141233] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
Oct 12 09:40:55 rok kernel: [ 25.142043] ehci_hcd 0000:00:10.4: EHCI Host Controller
Oct 12 09:40:55 rok kernel: [ 25.142120] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Oct 12 09:40:55 rok kernel: [ 25.142187] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbfff800
Oct 12 09:40:55 rok kernel: [ 25.142196] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 12 09:40:55 rok kernel: [ 25.142367] usb usb5: configuration #1 chosen from 1 choice
Oct 12 09:40:55 rok kernel: [ 25.142408] hub 5-0:1.0: USB hub found
Oct 12 09:40:55 rok kernel: [ 25.142420] hub 5-0:1.0: 8 ports detected
Oct 12 09:40:55 rok kernel: [ 25.258175] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
Oct 12 09:40:55 rok kernel: [ 25.258228] sata_via 0000:00:0f.0: routed to hard irq line 7
Oct 12 09:40:55 rok kernel: [ 25.258366] scsi0 : sata_via
Oct 12 09:40:55 rok kernel: [ 25.924541] scsi1 : sata_via
Oct 12 09:40:55 rok kernel: [ 25.924587] ata1: SATA max UDMA/133 cmd 0x000000000001d880 ctl 0x000000000001d802 bmdma 0x000000000001d080 irq 20
Oct 12 09:40:55 rok kernel: [ 25.924593] ata2: SATA max UDMA/133 cmd 0x000000000001d480 ctl 0x000000000001d402 bmdma 0x000000000001d088 irq 20
Oct 12 09:40:55 rok kernel: [ 26.124287] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 12 09:40:55 rok kernel: [ 25.573917] usb 1-1: device not accepting address 2, error -71
Oct 12 09:40:55 rok kernel: [ 26.298235] ata1.00: ATA-6: WDC WD2000JD-00KLB0, 08.05J08, max UDMA/100
Oct 12 09:40:55 rok kernel: [ 26.298239] ata1.00: 390721968 sectors, multi 16: LBA48
Oct 12 09:40:55 rok kernel: [ 26.304204] ata1.00: configured for UDMA/100
Oct 12 09:40:55 rok kernel: [ 25.838291] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Oct 12 09:40:55 rok kernel: [ 26.514807] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JD-00K 08.0 PQ: 0 ANSI: 5
Oct 12 09:40:55 rok kernel: [ 25.848843] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
Oct 12 09:40:55 rok kernel: [ 26.514950] sd 0:0:0:0: [sda] Write Protect is off
Oct 12 09:40:55 rok kernel: [ 26.514992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 09:40:55 rok kernel: [ 26.515082] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
Oct 12 09:40:55 rok kernel: [ 25.849020] sd 0:0:0:0: [sda] Write Protect is off
Oct 12 09:40:55 rok kernel: [ 25.849060] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 09:40:55 rok kernel: [ 25.849066] sda: sda1 sda2 sda3
Oct 12 09:40:55 rok kernel: [ 26.534878] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 12 09:40:55 rok kernel: [ 27.429154] usb 5-7: new high speed USB device using ehci_hcd and address 3
Oct 12 09:40:55 rok kernel: [ 27.545424] usb 5-7: configuration #1 chosen from 1 choice
Oct 12 09:40:55 rok kernel: [ 27.085304] usb 1-1: new full speed USB device using uhci_hcd and address 4
Oct 12 09:40:55 rok kernel: [ 27.920539] usb 1-1: configuration #1 chosen from 1 choice
Oct 12 09:40:55 rok kernel: [ 29.036899] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 12 09:40:55 rok kernel: [ 29.036908] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 12 09:40:55 rok kernel: [ 29.041163] Initializing USB Mass Storage driver...
Oct 12 09:40:55 rok kernel: [ 29.041319] scsi2 : SCSI emulation for USB Mass Storage devices
Oct 12 09:40:55 rok kernel: [ 28.375369] usbcore: registered new interface driver usb-storage
Oct 12 09:40:55 rok kernel: [ 28.375374] USB Mass Storage support registered.
Oct 12 09:40:55 rok kernel: [ 33.364159] scsi 2:0:0:0: Direct-Access Generic USB Storage-CFC I19A PQ: 0 ANSI: 0 CCS
Oct 12 09:40:55 rok kernel: [ 34.031265] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Oct 12 09:40:55 rok kernel: [ 34.031967] scsi 2:0:0:1: Direct-Access Generic USB Storage-SDC I19A PQ: 0 ANSI: 0 CCS
Oct 12 09:40:55 rok kernel: [ 33.366876] sd 2:0:0:1: [sdc] 494080 512-byte hardware sectors (253 MB)
Oct 12 09:40:55 rok kernel: [ 33.367500] sd 2:0:0:1: [sdc] Write Protect is off
Oct 12 09:40:55 rok kernel: [ 33.367507] sd 2:0:0:1: [sdc] Assuming drive cache: write through
Oct 12 09:40:55 rok kernel: [ 33.371251] sd 2:0:0:1: [sdc] 494080 512-byte hardware sectors (253 MB)
Oct 12 09:40:55 rok kernel: [ 34.037935] sd 2:0:0:1: [sdc] Write Protect is off
Oct 12 09:40:55 rok kernel: [ 34.037943] sd 2:0:0:1: [sdc] Assuming drive cache: write through
Oct 12 09:40:55 rok kernel: [ 34.040031] sdc: sdc1
Oct 12 09:40:55 rok kernel: [ 33.377025] sd 2:0:0:1: [sdc] Attached SCSI removable disk
Oct 12 09:40:55 rok kernel: [ 33.377733] scsi 2:0:0:2: Direct-Access Generic USB Storage-SMC I19A PQ: 0 ANSI: 0 CCS
Oct 12 09:40:55 rok kernel: [ 34.044847] sd 2:0:0:2: [sdd] Attached SCSI removable disk
Oct 12 09:40:55 rok kernel: [ 33.379365] scsi 2:0:0:3: Direct-Access Generic USB Storage-MSC I19A PQ: 0 ANSI: 0 CCS
Oct 12 09:40:55 rok kernel: [ 33.380391] sd 2:0:0:3: [sde] Attached SCSI removable disk
Oct 12 09:40:55 rok kernel: [ 37.055931] kjournald starting. Commit interval 5 seconds
Oct 12 09:40:55 rok kernel: [ 36.389864] EXT3-fs: mounted filesystem with ordered data mode.
Oct 12 09:40:55 rok kernel: [ 40.033169] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 12 09:40:55 rok kernel: [ 40.033445] sd 2:0:0:0: Attached scsi generic sg1 type 0
Oct 12 09:40:55 rok kernel: [ 40.033481] sd 2:0:0:1: Attached scsi generic sg2 type 0
Oct 12 09:40:55 rok kernel: [ 40.033516] sd 2:0:0:2: Attached scsi generic sg3 type 0
Oct 12 09:40:55 rok kernel: [ 40.033550] sd 2:0:0:3: Attached scsi generic sg4 type 0
Oct 12 09:40:55 rok kernel: [ 40.282393] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Oct 12 09:40:55 rok kernel: [ 40.282440] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
Oct 12 09:40:55 rok kernel: [ 40.282460] VP_IDE: chipset revision 6
Oct 12 09:40:55 rok kernel: [ 40.282463] VP_IDE: not 100% native mode: will probe irqs later
Oct 12 09:40:55 rok kernel: [ 40.282479] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Oct 12 09:40:55 rok kernel: [ 40.282493] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
Oct 12 09:40:55 rok kernel: [ 40.282517] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Oct 12 09:40:55 rok kernel: [ 40.481425] Linux video capture interface: v2.00
Oct 12 09:40:55 rok kernel: [ 41.340920] Bluetooth: HCI USB driver ver 2.9
Oct 12 09:40:55 rok kernel: [ 41.482817] usbcore: registered new interface driver hci_usb
Oct 12 09:40:55 rok kernel: [ 41.129986] parport_pc 00:06: reported by Plug and Play ACPI
Oct 12 09:40:55 rok kernel: [ 41.130127] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Oct 12 09:40:55 rok kernel: [ 41.383304] bttv: driver version 0.9.17 loaded
Oct 12 09:40:55 rok kernel: [ 41.383312] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 09:40:55 rok kernel: [ 41.612592] hdc: LITE-ON DVDRW SHW-1635S, ATAPI CD/DVD-ROM drive
Oct 12 09:40:55 rok kernel: [ 42.223630] ide1 at 0x170-0x177,0x376 on irq 15
Oct 12 09:40:55 rok kernel: [ 42.890870] bttv: Bt8xx card found (0).
Oct 12 09:40:55 rok kernel: [ 42.890912] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
Oct 12 09:40:55 rok kernel: [ 42.890932] bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 19, latency: 32, mmio: 0xdffff000
Oct 12 09:40:55 rok kernel: [ 42.890950] bttv0: detected: Zoltrix Genie TV [card=46], PCI subsystem ID is 15b0:4000
Oct 12 09:40:55 rok kernel: [ 42.890955] bttv0: using: Zoltrix Genie TV/FM [card=46,autodetected]
Oct 12 09:40:55 rok kernel: [ 42.891572] bttv0: tuner type=21
Oct 12 09:40:55 rok kernel: [ 42.891577] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Oct 12 09:40:55 rok kernel: [ 42.892065] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Oct 12 09:40:55 rok kernel: [ 42.923102] tuner 1-0060: All bytes are equal. It is not a TEA5767
Oct 12 09:40:55 rok kernel: [ 42.923109] tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
Oct 12 09:40:55 rok kernel: [ 42.923156] tuner 1-0060: type set to 21 (Temic NTSC (4039 FR5))
Oct 12 09:40:55 rok kernel: [ 42.923162] tuner 1-0060: type set to 21 (Temic NTSC (4039 FR5))
Oct 12 09:40:55 rok kernel: [ 42.930789] bttv0: registered device video0
Oct 12 09:40:55 rok kernel: [ 42.930825] bttv0: registered device vbi0
Oct 12 09:40:55 rok kernel: [ 42.930850] bttv0: PLL: 28636363 => 35468950 .. ok
Oct 12 09:40:55 rok kernel: [ 42.351617] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Oct 12 09:40:55 rok kernel: [ 42.351674] Uniform CD-ROM driver Revision: 3.20
Oct 12 09:40:55 rok kernel: [ 42.541238] FDC 0 is a post-1991 82077
Oct 12 09:40:55 rok kernel: [ 44.489257] EXT3 FS on dm-0, internal journal
Oct 12 09:40:55 rok kernel: [ 44.621248] kjournald starting. Commit interval 5 seconds
Oct 12 09:40:55 rok kernel: [ 44.621804] EXT3 FS on sda1, internal journal
Oct 12 09:40:55 rok kernel: [ 44.621811] EXT3-fs: mounted filesystem with ordered data mode.
Oct 12 09:40:55 rok kernel: [ 44.656702] kjournald starting. Commit interval 5 seconds
Oct 12 09:40:55 rok kernel: [ 44.657095] EXT3 FS on dm-1, internal journal
Oct 12 09:40:55 rok kernel: [ 44.657102] EXT3-fs: mounted filesystem with ordered data mode.
Oct 12 09:40:55 rok kernel: [ 45.250254] Adding 524280k swap on /dev/VolGroup00/LogVol00. Priority:-1 extents:1 across:524280k
Oct 12 09:40:55 rok kernel: [ 46.186318] IA-32 Microcode Update Driver: v1.14a <[email protected]>
Oct 12 09:40:55 rok kernel: [ 48.543858] NET: Registered protocol family 10
Oct 12 09:40:55 rok kernel: [ 51.618404] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 12 09:40:55 rok rpcbind: cannot bind * on udp6: Address already in use
Oct 12 09:40:55 rok rpcbind: cannot bind tcp6: Address already in use
Oct 12 09:40:56 rok rpc.statd[2542]: Version 1.1.0 Starting
Oct 12 09:40:56 rok sm-notify[2544]: sm-notify running as root. chown /var/lib/nfs/sm to choose different user
Oct 12 09:40:56 rok Backgrounding to notify hosts...
Oct 12 09:40:57 rok hcid[2577]: Bluetooth HCI daemon
Oct 12 09:40:57 rok sdpd[2581]: Bluetooth SDP daemon
Oct 12 09:40:57 rok sdpd[2581]: Starting SDP server
Oct 12 09:40:57 rok hcid[2577]: HCI dev 0 registered
Oct 12 09:40:57 rok hcid[2577]: HCI dev 0 up
Oct 12 09:40:57 rok hcid[2577]: Device hci0 has been added
Oct 12 09:40:57 rok input[2587]: Bluetooth Input daemon
Oct 12 09:40:57 rok input[2587]: Registered input manager path:/org/bluez/input
Oct 12 09:40:57 rok hcid[2577]: Starting security manager 0
Oct 12 09:40:57 rok kernel: [ 56.801069] Bluetooth: L2CAP ver 2.8
Oct 12 09:40:57 rok kernel: [ 56.801078] Bluetooth: L2CAP socket layer initialized
Oct 12 09:40:57 rok hcid[2577]: Device hci0 has been activated
Oct 12 09:40:57 rok kernel: [ 56.221820] Bluetooth: RFCOMM socket layer initialized
Oct 12 09:40:57 rok kernel: [ 56.221863] Bluetooth: RFCOMM TTY layer initialized
Oct 12 09:40:57 rok kernel: [ 56.221867] Bluetooth: RFCOMM ver 1.8
Oct 12 09:40:58 rok kernel: [ 57.726582] w83627hf: Found W83697HF chip at 0x290
Oct 12 09:40:58 rok automount[2681]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master
Oct 12 09:40:59 rok hpiod: 1.7.4a accepting connections at 2208...
Oct 12 09:41:01 rok hpiod: unable to Device::Open hp:/usb/DeskJet_920C?serial=HU1A66P10FBI io/hpiod/device.cpp 942
Oct 12 09:41:01 rok DeskJet_920C?serial=HU1A66P10FBI: INFO: open device failed; will retry in 30 seconds...
Oct 12 09:41:02 rok xinetd[2785]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Oct 12 09:41:02 rok xinetd[2785]: Started working: 1 available service
Oct 12 09:41:02 rok ntpd[2805]: ntpd [email protected] Tue Aug 21 13:58:55 UTC 2007 (1)
Oct 12 09:41:02 rok ntpd[2808]: precision = 8.000 usec
Oct 12 09:41:02 rok ntpd[2808]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Oct 12 09:41:02 rok ntpd[2808]: Listening on interface #1 wildcard, ::#123 Disabled
Oct 12 09:41:03 rok ntpd[2808]: Listening on interface #2 eth0, fe80::213:8fff:fe27:348c#123 Enabled
Oct 12 09:41:03 rok ntpd[2808]: Listening on interface #3 lo, ::1#123 Enabled
Oct 12 09:41:03 rok ntpd[2808]: Listening on interface #4 eth0, 192.168.10.124#123 Enabled
Oct 12 09:41:03 rok ntpd[2808]: Listening on interface #5 lo, 127.0.0.1#123 Enabled
Oct 12 09:41:03 rok ntpd[2808]: kernel time sync status 0040
Oct 12 09:41:03 rok ntpd[2808]: frequency initialized 259.550 PPM from /var/lib/ntp/drift
Oct 12 09:41:04 rok hpiod: unable to Device::Open hp:/usb/DeskJet_920C?serial=HU1A66P10FBI io/hpiod/device.cpp 942
Oct 12 09:41:04 rok kernel: [ 63.986124] Installing knfsd (copyright (C) 1996 [email protected]).
Oct 12 09:41:08 rok dhcdbd: Started up.
does anything get printed prior the lockup if you enable all of these:
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
?
Ingo
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rt1
# Fri Oct 12 14:11:29 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_NONIRQ_WAKEUP=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CPUSETS is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_RADIX_TREE_CONCURRENT=y
CONFIG_RADIX_TREE_OPTIMISTIC=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
CONFIG_MPSC=y
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y
CONFIG_PREEMPT_HARDIRQS=y
CONFIG_PREEMPT_BKL=y
# CONFIG_CLASSIC_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_PREEMPT_RCU_BOOST is not set
CONFIG_RCU_TRACE=y
# CONFIG_NUMA is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_NR_CPUS=8
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_SMP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=y
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU idle PM support
#
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_IDEDISK is not set
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=m
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_B44=m
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=16
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=128
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_RTC_HISTOGRAM is not set
CONFIG_BLOCKER=y
CONFIG_LPPTEST=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_RMEM=m
CONFIG_ALLOC_RTSJ_MEM=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_LM70_LLP is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_SAA6588 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_TUNER_TEA5761 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=m
# CONFIG_VIDEO_CX88_ALSA is not set
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=y
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_ZEROPLUS_FF=y
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_VIRTUALIZATION is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_PREEMPT_TRACE=y
# CONFIG_EVENT_TRACE is not set
# CONFIG_FUNCTION_TRACE is not set
# CONFIG_WAKEUP_TIMING is not set
# CONFIG_CRITICAL_PREEMPT_TIMING is not set
# CONFIG_CRITICAL_IRQSOFF_TIMING is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
* Rok Markovic <[email protected]> wrote:
> I tried to recompile with those options enabled, kernel and linux
> boots and loads fine, but after few minutes (if i try to recompile
> kernel in console) the system locks completely (hard reset) without
> any messages. Is there anything I can do, maybe console on serial
> port? My new config is atached.
yes, serial console (or netconsole) output would be useful, if you can
solve that. Another way would be to boot with nmi_watchdog=2, do the
kernel recompile in a VGA text console, and wait for the lockup to
occur. Either you get some crash message to the text console
immediately, or you should get the NMI watchdog print something within a
minute or so. If neither happens you just get a blank hard lockup then
the wedge is very deep ...
(also make sure that the NMI counter in /proc/interrupts is increasing
on all CPUs properly, with nmi_watchdog=2. If not all CPUs/cores are
increasing their NMI counters once per second then the NMI watchdog wont
be able to print out a stackdump.)
Ingo
Hi again!
I tried to boot into VGA mode with NMI watchdog=2. System loads OK,
nmi counter is increasing on both CPUs (procesor is HT), but
when I start to load the CPU (compiling kernel), system locks
without any message. Even blinking cursor disapears. I will
try to do netconsole loging, but I can't promise any results for today.
Rok
Ingo Molnar wrote:
>> I tried to recompile with those options enabled, kernel and linux
>> boots and loads fine, but after few minutes (if i try to recompile
>> kernel in console) the system locks completely (hard reset) without
>> any messages. Is there anything I can do, maybe console on serial
>> port? My new config is atached.
>
> yes, serial console (or netconsole) output would be useful, if you can
> solve that. Another way would be to boot with nmi_watchdog=2, do the
> kernel recompile in a VGA text console, and wait for the lockup to
> occur. Either you get some crash message to the text console
> immediately, or you should get the NMI watchdog print something within a
> minute or so. If neither happens you just get a blank hard lockup then
> the wedge is very deep ...
>
> (also make sure that the NMI counter in /proc/interrupts is increasing
> on all CPUs properly, with nmi_watchdog=2. If not all CPUs/cores are
> increasing their NMI counters once per second then the NMI watchdog wont
> be able to print out a stackdump.)
>
> Ingo
Hi
I enabled netconsole but I am affraid that it won't help. In attachment
I am sending complete log over netconsole. While I was trying to make
everything, I got a lockup on linux-2.6.23-rc8, but I am not sure into
this. But all lockups happend in VGA console mode. Any ideas.
Rok
Ingo Molnar wrote:
>> I tried to recompile with those options enabled, kernel and linux
>> boots and loads fine, but after few minutes (if i try to recompile
>> kernel in console) the system locks completely (hard reset) without
>> any messages. Is there anything I can do, maybe console on serial
>> port? My new config is atached.
>
> yes, serial console (or netconsole) output would be useful, if you can
> solve that. Another way would be to boot with nmi_watchdog=2, do the
> kernel recompile in a VGA text console, and wait for the lockup to
> occur. Either you get some crash message to the text console
> immediately, or you should get the NMI watchdog print something within a
> minute or so. If neither happens you just get a blank hard lockup then
> the wedge is very deep ...
>
> (also make sure that the NMI counter in /proc/interrupts is increasing
> on all CPUs properly, with nmi_watchdog=2. If not all CPUs/cores are
> increasing their NMI counters once per second then the NMI watchdog wont
> be able to print out a stackdump.)
>
> Ingo
I forgot attachment.
Rok
Rok Markovic wrote:
> Hi
>
> I enabled netconsole but I am affraid that it won't help. In attachment
> I am sending complete log over netconsole. While I was trying to make
> everything, I got a lockup on linux-2.6.23-rc8, but I am not sure into
> this. But all lockups happend in VGA console mode. Any ideas.
>
> Rok
>
>
> Ingo Molnar wrote:
>>> I tried to recompile with those options enabled, kernel and linux
>>> boots and loads fine, but after few minutes (if i try to recompile
>>> kernel in console) the system locks completely (hard reset) without
>>> any messages. Is there anything I can do, maybe console on serial
>>> port? My new config is atached.
>> yes, serial console (or netconsole) output would be useful, if you can
>> solve that. Another way would be to boot with nmi_watchdog=2, do the
>> kernel recompile in a VGA text console, and wait for the lockup to
>> occur. Either you get some crash message to the text console
>> immediately, or you should get the NMI watchdog print something within a
>> minute or so. If neither happens you just get a blank hard lockup then
>> the wedge is very deep ...
>>
>> (also make sure that the NMI counter in /proc/interrupts is increasing
>> on all CPUs properly, with nmi_watchdog=2. If not all CPUs/cores are
>> increasing their NMI counters once per second then the NMI watchdog wont
>> be able to print out a stackdump.)
>>
>> Ingo
* Rok Markovic <[email protected]> wrote:
> I enabled netconsole but I am affraid that it won't help. In
> attachment I am sending complete log over netconsole. While I was
> trying to make everything, I got a lockup on linux-2.6.23-rc8, but I
> am not sure into this. But all lockups happend in VGA console mode.
> Any ideas.
hm:
[ 104.224904] oprofile: using NMI interrupt.
could you disable CONFIG_OPROFILE? Maybe it interferes with the NMI
watchdog?
how does /proc/interrupts look like shortly after bootup? Does a simple
"intentional lockup" piece of code, which provokes a hard lockup from
user-space, get properly zapped by the NMI watchdog (within a minute or
so):
# cat > lockup.c
int main(void)
{
iopl(3);
for (;;)
asm("cli");
}
Ctrl-D
# make lockup
# ./lockup
<hard hang>
the NMI watchdog should produce a console message similar to:
BUG: NMI Watchdog detected LOCKUP on CPU0, eip bff12345, registers:
...
( if you test ./lockup and get the message properly then i'd suggest a
new reboot - i think we inhibit further console output after an NMI
printout. )
Ingo
Hi
I have recompiled kernel with OPROFILE disabled. I am sending in
attachment /proc/interrupts (i ran it 3 times with 2 sec delay) and
netconsole log. Lockup in the lock is software made with ./lockup.
The kernel still locks 4-5minutes after boot without any further
messages (waited more than 2 minutes). Any ideas?
Rok
Ingo Molnar wrote:
> could you disable CONFIG_OPROFILE? Maybe it interferes with the NMI
> watchdog?
>
> how does /proc/interrupts look like shortly after bootup? Does a simple
> "intentional lockup" piece of code, which provokes a hard lockup from
> user-space, get properly zapped by the NMI watchdog (within a minute or
> so):
>
> the NMI watchdog should produce a console message similar to:
>
> BUG: NMI Watchdog detected LOCKUP on CPU0, eip bff12345, registers:
> ...
>
> ( if you test ./lockup and get the message properly then i'd suggest a
> new reboot - i think we inhibit further console output after an NMI
> printout. )
>
> Ingo
>
>
* Rok Markovic <[email protected]> wrote:
> Hi
>
> I have recompiled kernel with OPROFILE disabled. I am sending in
> attachment /proc/interrupts (i ran it 3 times with 2 sec delay) and
> netconsole log. Lockup in the lock is software made with ./lockup. The
> kernel still locks 4-5minutes after boot without any further messages
> (waited more than 2 minutes). Any ideas?
no good ideas :-( I suspect this one:
[ 185.600900] hdc: lost interrupt
was a side-effect of lockup.c too?
does the lockup go away if you boot with maxcpus=1?
Ingo
Hi
Good news (I hope). With kernel option maxcpus=1, I can not get
a lock, so the system is stable and running. Where could be a problem?
Best regards,
Rok
Ingo Molnar wrote:
>> Hi
>>
>> I have recompiled kernel with OPROFILE disabled. I am sending in
>> attachment /proc/interrupts (i ran it 3 times with 2 sec delay) and
>> netconsole log. Lockup in the lock is software made with ./lockup. The
>> kernel still locks 4-5minutes after boot without any further messages
>> (waited more than 2 minutes). Any ideas?
>
> no good ideas :-( I suspect this one:
>
> [ 185.600900] hdc: lost interrupt
>
> was a side-effect of lockup.c too?
>
> does the lockup go away if you boot with maxcpus=1?
>
> Ingo
>
>