Hello,
When I run 'halt' or 'poweroff' (sysvinit-2.86) the kernel prints:
Halting.
Shutdown: hdc
ACPI: PCI interrupt for device 0000:01:05.0 disabled
ACPI: PCI interrupt for device 0000:01:04.0 disabled
ACPI: PCI interrupt for device 0000:01:03.0 disabled
ACPI: PCI interrupt for device 0000:01:02.0 disabled
Power down.
acpi_power_off called
But the system does not shut down. (The fans keep spinning, the LEDs
keep shining, the integrated LCD keeps displaying.) Basically, the
motherboard is still providing power to every component, as if the power
supply had refused to stop.
I followed the instructions given here:
http://bugzilla.kernel.org/show_bug.cgi?id=6431
cf. http://bugzilla.kernel.org/show_bug.cgi?id=9148
The system is an FWA-3140-CE:
http://advantech.com/products/1U-Rackmount-Intel-Pentium-4Processor-based-Platform-with-4PCI-LAN-Ports-2-PCI-Expansion-Slots/mod_1-23A2W4.aspx
The manufacturer is unwilling to help because they don't support Linux,
and claim it is a software issue. I will ask them whether Windows is
able to properly shut the system down.
What can I do to help fix the problem?
Regards.
John Sigler wrote:
> When I run 'halt' or 'poweroff' (sysvinit-2.86) the kernel prints:
>
> Halting.
> Shutdown: hdc
> ACPI: PCI interrupt for device 0000:01:05.0 disabled
> ACPI: PCI interrupt for device 0000:01:04.0 disabled
> ACPI: PCI interrupt for device 0000:01:03.0 disabled
> ACPI: PCI interrupt for device 0000:01:02.0 disabled
> Power down.
> acpi_power_off called
>
> But the system does not shut down. (The fans keep spinning, the LEDs
> keep shining, the integrated LCD keeps displaying.) Basically, the
> motherboard is still providing power to every component, as if the
> power supply had refused to stop.
I noticed the following message at boot:
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
Is there any chance that the two issues are connected?
(It seems very unlikely.)
How can I tell whether the bug is fixed in my south bridge or not?
http://linux.kernel.free.fr/halt/lspci.txt
Regards.