2023-12-07 08:04:22

by Andy Yan

Subject: [PATCH v4 16/17] arm64: dts: rockchip: Add vop on rk3588

From: Andy Yan <[email protected]>

Add vop dt node for rk3588.

Signed-off-by: Andy Yan <[email protected]>
---

(no changes since v1)

arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 96 +++++++++++++++++++++++
1 file changed, 96 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 7064c0e9179f..a9810ca78dc4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -362,6 +362,11 @@ spll: clock-0 {
#clock-cells = <0>;
};

+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -474,6 +479,16 @@ sys_grf: syscon@fd58c000 {
reg = <0x0 0xfd58c000 0x0 0x1000>;
};

+ vop_grf: syscon@fd5a4000 {
+ compatible = "rockchip,rk3588-vop-grf", "syscon";
+ reg = <0x0 0xfd5a4000 0x0 0x2000>;
+ };
+
+ vo1_grf: syscon@fd5a8000 {
+ compatible = "rockchip,rk3588-vo-grf", "syscon";
+ reg = <0x0 0xfd5a8000 0x0 0x100>;
+ };
+
php_grf: syscon@fd5b0000 {
compatible = "rockchip,rk3588-php-grf", "syscon";
reg = <0x0 0xfd5b0000 0x0 0x1000>;
@@ -593,6 +608,87 @@ i2c0: i2c@fd880000 {
status = "disabled";
};

+ vop: vop@fdd90000 {
+ compatible = "rockchip,rk3588-vop";
+ reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+ reg-names = "vop", "gamma_lut";
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VOP>,
+ <&cru HCLK_VOP>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru DCLK_VOP2>,
+ <&cru DCLK_VOP3>,
+ <&cru PCLK_VOP_ROOT>;
+ clock-names = "aclk",
+ "hclk",
+ "dclk_vp0",
+ "dclk_vp1",
+ "dclk_vp2",
+ "dclk_vp3",
+ "pclk_vop";
+ resets = <&cru SRST_A_VOP>,
+ <&cru SRST_H_VOP>,
+ <&cru SRST_D_VOP0>,
+ <&cru SRST_D_VOP1>,
+ <&cru SRST_D_VOP2>,
+ <&cru SRST_D_VOP3>;
+ reset-names = "axi",
+ "ahb",
+ "dclk_vp0",
+ "dclk_vp1",
+ "dclk_vp2",
+ "dclk_vp3";
+ iommus = <&vop_mmu>;
+ power-domains = <&power RK3588_PD_VOP>;
+ rockchip,grf = <&sys_grf>;
+ rockchip,vop-grf = <&vop_grf>;
+ rockchip,vo1-grf = <&vo1_grf>;
+ rockchip,pmu = <&pmu>;
+
+ status = "disabled";
+ vop_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp0: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ vp1: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ vp2: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ vp3: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ vop_mmu: iommu@fdd97e00 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vop_mmu";
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3588_PD_VOP>;
+ status = "disabled";
+ };
+
uart0: serial@fd890000 {
compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
reg = <0x0 0xfd890000 0x0 0x100>;
--
2.34.1

2023-12-08 16:27:00

by Heiko Stuebner

Subject: Re: [PATCH v4 16/17] arm64: dts: rockchip: Add vop on rk3588

Hi Andy,

Am Donnerstag, 7. Dezember 2023, 09:02:47 CET schrieb Andy Yan:
> From: Andy Yan <[email protected]>
>
> Add vop dt node for rk3588.
>
> Signed-off-by: Andy Yan <[email protected]>
> ---
>
> (no changes since v1)
>
> arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 96 +++++++++++++++++++++++
> 1 file changed, 96 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> index 7064c0e9179f..a9810ca78dc4 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> @@ -593,6 +608,87 @@ i2c0: i2c@fd880000 {
> status = "disabled";
> };
>
> + vop: vop@fdd90000 {
> + compatible = "rockchip,rk3588-vop";
> + reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
> + reg-names = "vop", "gamma_lut";
> + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&cru ACLK_VOP>,
> + <&cru HCLK_VOP>,
> + <&cru DCLK_VOP0>,
> + <&cru DCLK_VOP1>,
> + <&cru DCLK_VOP2>,
> + <&cru DCLK_VOP3>,
> + <&cru PCLK_VOP_ROOT>;
> + clock-names = "aclk",
> + "hclk",
> + "dclk_vp0",
> + "dclk_vp1",
> + "dclk_vp2",
> + "dclk_vp3",
> + "pclk_vop";
> + resets = <&cru SRST_A_VOP>,
> + <&cru SRST_H_VOP>,
> + <&cru SRST_D_VOP0>,
> + <&cru SRST_D_VOP1>,
> + <&cru SRST_D_VOP2>,
> + <&cru SRST_D_VOP3>;
> + reset-names = "axi",
> + "ahb",
> + "dclk_vp0",
> + "dclk_vp1",
> + "dclk_vp2",
> + "dclk_vp3";

resets and reset-names do not seem to be part of the binding, so
should probably be added there.


> + iommus = <&vop_mmu>;
> + power-domains = <&power RK3588_PD_VOP>;
> + rockchip,grf = <&sys_grf>;
> + rockchip,vop-grf = <&vop_grf>;
> + rockchip,vo1-grf = <&vo1_grf>;
> + rockchip,pmu = <&pmu>;
> +

move this blank line _below_ the status=disabled please.

> + status = "disabled";
> + vop_out: ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vp0: port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + };
> +
> + vp1: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + };
> +
> + vp2: port@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> + };
> +
> + vp3: port@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> + };
> + };
> + };
> +
> + vop_mmu: iommu@fdd97e00 {
> + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
> + reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
> + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "vop_mmu";

interrupt-names is not part of the mainline iommu binding, so should be dropped


Thanks
Heiko

2023-12-09 01:29:42

by Andy Yan

Subject: Re: [PATCH v4 16/17] arm64: dts: rockchip: Add vop on rk3588

Hi Heiko:

On 12/9/23 00:26, Heiko Stübner wrote:
> Hi Andy,
>
> Am Donnerstag, 7. Dezember 2023, 09:02:47 CET schrieb Andy Yan:
>> From: Andy Yan <[email protected]>
>>
>> Add vop dt node for rk3588.
>>
>> Signed-off-by: Andy Yan <[email protected]>
>> ---
>>
>> (no changes since v1)
>>
>> arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 96 +++++++++++++++++++++++
>> 1 file changed, 96 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> index 7064c0e9179f..a9810ca78dc4 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> @@ -593,6 +608,87 @@ i2c0: i2c@fd880000 {
>> status = "disabled";
>> };
>>
>> + vop: vop@fdd90000 {
>> + compatible = "rockchip,rk3588-vop";
>> + reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
>> + reg-names = "vop", "gamma_lut";
>> + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&cru ACLK_VOP>,
>> + <&cru HCLK_VOP>,
>> + <&cru DCLK_VOP0>,
>> + <&cru DCLK_VOP1>,
>> + <&cru DCLK_VOP2>,
>> + <&cru DCLK_VOP3>,
>> + <&cru PCLK_VOP_ROOT>;
>> + clock-names = "aclk",
>> + "hclk",
>> + "dclk_vp0",
>> + "dclk_vp1",
>> + "dclk_vp2",
>> + "dclk_vp3",
>> + "pclk_vop";
>> + resets = <&cru SRST_A_VOP>,
>> + <&cru SRST_H_VOP>,
>> + <&cru SRST_D_VOP0>,
>> + <&cru SRST_D_VOP1>,
>> + <&cru SRST_D_VOP2>,
>> + <&cru SRST_D_VOP3>;
>> + reset-names = "axi",
>> + "ahb",
>> + "dclk_vp0",
>> + "dclk_vp1",
>> + "dclk_vp2",
>> + "dclk_vp3";
>
> resets and reset-names do not seem to be part of the binding, so
> should probably be added there.

I will drop resets and reset-names in next version.
>
>
>> + iommus = <&vop_mmu>;
>> + power-domains = <&power RK3588_PD_VOP>;
>> + rockchip,grf = <&sys_grf>;
>> + rockchip,vop-grf = <&vop_grf>;
>> + rockchip,vo1-grf = <&vo1_grf>;
>> + rockchip,pmu = <&pmu>;
>> +
>
> move this blank line _below_ the status=disabled please.

ok, will do.
>
>> + status = "disabled";
>> + vop_out: ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + vp0: port@0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0>;
>> + };
>> +
>> + vp1: port@1 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <1>;
>> + };
>> +
>> + vp2: port@2 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <2>;
>> + };
>> +
>> + vp3: port@3 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <3>;
>> + };
>> + };
>> + };
>> +
>> + vop_mmu: iommu@fdd97e00 {
>> + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
>> + reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
>> + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
>> + interrupt-names = "vop_mmu";
>
> interrupt-names is not part of the mainline iommu binding, so should be dropped

will do.
>
>
> Thanks
> Heiko
>
>