Added CC to linux-ide
-------- Originele bericht --------
Onderwerp: sata_mv not working with a RocketRaid 2220
Datum: Mon, 17 Dec 2007 00:15:30 +0100
Van: Jean-Louis Dupond <[email protected]>
Aan: [email protected]
Hello,
I'm trying to get my HighPoint RocketRaid Controller working with the
sata_mv drivers.
But something is not working correctly :(
Kernel version 2.6.23.11 (also tried 2.6.24-rc5 with same results)
Controller in lspci: Marvell Technology Group Ltd. MV88SX6081 8-port
SATA II PCI-X Controller (rev 07)
1.
Dec 16 22:44:29 localhost kernel: sata_mv 0000:05:08.0: Gen-II 32
slots 8 ports SCSI mode IRQ via INTx
2.
Dec 16 22:44:29 localhost kernel: scsi4 : sata_mv
3.
Dec 16 22:44:29 localhost kernel: scsi5 : sata_mv
4.
Dec 16 22:44:29 localhost kernel: scsi6 : sata_mv
5.
Dec 16 22:44:29 localhost kernel: scsi7 : sata_mv
6.
Dec 16 22:44:29 localhost kernel: scsi8 : sata_mv
7.
Dec 16 22:44:29 localhost kernel: scsi9 : sata_mv
8.
Dec 16 22:44:29 localhost kernel: scsi10 : sata_mv
9.
Dec 16 22:44:29 localhost kernel: scsi11 : sata_mv
10.
Dec 16 22:44:29 localhost kernel: ata5: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010122120 bmdma 0x0000000000000000
irq 16
11.
Dec 16 22:44:29 localhost kernel: ata6: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010124120 bmdma 0x0000000000000000
irq 16
12.
Dec 16 22:44:29 localhost kernel: ata7: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010126120 bmdma 0x0000000000000000
irq 16
13.
Dec 16 22:44:29 localhost kernel: ata8: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010128120 bmdma 0x0000000000000000
irq 16
14.
Dec 16 22:44:29 localhost kernel: ata9: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010132120 bmdma 0x0000000000000000
irq 16
15.
Dec 16 22:44:29 localhost kernel: ata10: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010134120 bmdma 0x0000000000000000
irq 16
16.
Dec 16 22:44:29 localhost kernel: ata11: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010136120 bmdma 0x0000000000000000
irq 16
17.
Dec 16 22:44:29 localhost kernel: ata12: SATA max UDMA/133 cmd
0x0000000000000000 ctl 0xffffc20010138120 bmdma 0x0000000000000000
irq 16
18.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
19.
Dec 16 22:44:29 localhost kernel: ata5.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
20.
Dec 16 22:44:29 localhost kernel: ata5.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
21.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
22.
Dec 16 22:44:29 localhost kernel: ata6: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
23.
Dec 16 22:44:29 localhost kernel: ata6.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
24.
Dec 16 22:44:29 localhost kernel: ata6.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
25.
Dec 16 22:44:29 localhost kernel: ata6.00: configured for UDMA/133
26.
Dec 16 22:44:29 localhost kernel: ata7: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
27.
Dec 16 22:44:29 localhost kernel: ata7.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
28.
Dec 16 22:44:29 localhost kernel: ata7.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
29.
Dec 16 22:44:29 localhost kernel: ata7.00: configured for UDMA/133
30.
Dec 16 22:44:29 localhost kernel: ata8: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
31.
Dec 16 22:44:29 localhost kernel: ata8.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
32.
Dec 16 22:44:29 localhost kernel: ata8.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
33.
Dec 16 22:44:29 localhost kernel: ata8.00: configured for UDMA/133
34.
Dec 16 22:44:29 localhost kernel: ata9: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
35.
Dec 16 22:44:29 localhost kernel: ata9.00: ATA-7: SAMSUNG SP2504C,
VT100-33, max UDMA7
36.
Dec 16 22:44:29 localhost kernel: ata9.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
37.
Dec 16 22:44:29 localhost kernel: ata9.00: configured for UDMA/133
38.
Dec 16 22:44:29 localhost kernel: ata10: SATA link down (SStatus 0
SControl 300)
39.
Dec 16 22:44:29 localhost kernel: ata11: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
40.
Dec 16 22:44:29 localhost kernel: ata11.00: ATA-7: SAMSUNG
SP2504C, VT100-33, max UDMA7
41.
Dec 16 22:44:29 localhost kernel: ata11.00: 488397168 sectors,
multi 0: LBA48 NCQ (depth 0/32)
42.
Dec 16 22:44:29 localhost kernel: ata11.00: configured for UDMA/133
43.
Dec 16 22:44:29 localhost kernel: ata12: SATA link down (SStatus 0
SControl 300)
44.
Dec 16 22:44:29 localhost kernel: scsi 4:0:0:0: Direct-Access
ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
45.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] 488397168
512-byte hardware sectors (250059 MB)
46.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write Protect
is off
47.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Mode Sense: 00
3a 00 00
48.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
49.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] 488397168
512-byte hardware sectors (250059 MB)
50.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write Protect
is off
51.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Mode Sense: 00
3a 00 00
52.
Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
53.
Dec 16 22:44:29 localhost kernel: sdb:<3>ata5.00: exception Emask
0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
54.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
55.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
56.
Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
57.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
58.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
59.
Dec 16 22:44:29 localhost kernel: ata5: EH complete
60.
Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
61.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
62.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
63.
Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
64.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
65.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
66.
Dec 16 22:44:29 localhost kernel: ata5: EH complete
67.
Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
68.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
69.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
70.
Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
71.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
72.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
73.
Dec 16 22:44:29 localhost kernel: ata5: EH complete
74.
Dec 16 22:44:29 localhost kernel: ata5: limiting SATA link speed
to 1.5 Gbps
75.
Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x6 frozen
76.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
77.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
78.
Dec 16 22:44:29 localhost kernel: ata5: hard resetting port
79.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
80.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
81.
Dec 16 22:44:29 localhost kernel: ata5: EH complete
82.
Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
83.
Dec 16 22:44:29 localhost kernel: ata5.00: cmd
c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
84.
Dec 16 22:44:29 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
85.
Dec 16 22:44:29 localhost kernel: ata5: hard resetting port
86.
Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
87.
Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
Jean-Louis Dupond wrote:
> Added CC to linux-ide
>
> -------- Originele bericht --------
> Onderwerp: sata_mv not working with a RocketRaid 2220
> Datum: Mon, 17 Dec 2007 00:15:30 +0100
> Van: Jean-Louis Dupond <[email protected]>
> Aan: [email protected]
>
>
>
> Hello,
>
> I'm trying to get my HighPoint RocketRaid Controller working with the
> sata_mv drivers.
> But something is not working correctly :(
>
> Kernel version 2.6.23.11 (also tried 2.6.24-rc5 with same results)
> Controller in lspci: Marvell Technology Group Ltd. MV88SX6081 8-port
> SATA II PCI-X Controller (rev 07)
>
..
The sata_mv driver is currently not very good,
but should improve over this winter as some effort
is finally going into fixing it.
And the Highpoint RocketRAID cards are a similarly dubious choice,
as their onboard BIOS is known to corrupt filesystems before Linux
is even booted.
In particular, an "unconfigured" drive -- just plugged into a RR card
without entering the BIOS setup to configure a RAID -- gets sector 8
overwritten by the BIOS. This will destroy GRUB if it was installed.
And for drives which *have* been configured in the RR BIOS,
it overwrites a sector at the end of the final full GB on the drive,
for holding RR metadata.
Cheers
Noticed it yet its not the best driver around, but its weird it almost
can initialize 1 device on the controller (sdb), and the rest totally fails.
Tried to put each disk in a JBOD, but that doesn't fix it neither.
Anyway thank you for the reply. Think i'll get some better controller :)
Mark Lord schreef:
> Jean-Louis Dupond wrote:
>> Added CC to linux-ide
>>
>> -------- Originele bericht --------
>> Onderwerp: sata_mv not working with a RocketRaid 2220
>> Datum: Mon, 17 Dec 2007 00:15:30 +0100
>> Van: Jean-Louis Dupond <[email protected]>
>> Aan: [email protected]
>>
>>
>>
>> Hello,
>>
>> I'm trying to get my HighPoint RocketRaid Controller working with the
>> sata_mv drivers.
>> But something is not working correctly :(
>>
>> Kernel version 2.6.23.11 (also tried 2.6.24-rc5 with same results)
>> Controller in lspci: Marvell Technology Group Ltd. MV88SX6081 8-port
>> SATA II PCI-X Controller (rev 07)
>>
> ..
>
> The sata_mv driver is currently not very good,
> but should improve over this winter as some effort
> is finally going into fixing it.
>
> And the Highpoint RocketRAID cards are a similarly dubious choice,
> as their onboard BIOS is known to corrupt filesystems before Linux
> is even booted.
>
> In particular, an "unconfigured" drive -- just plugged into a RR card
> without entering the BIOS setup to configure a RAID -- gets sector 8
> overwritten by the BIOS. This will destroy GRUB if it was installed.
> And for drives which *have* been configured in the RR BIOS,
> it overwrites a sector at the end of the final full GB on the drive,
> for holding RR metadata.
>
> Cheers
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>