This patch adds device tree source, default config and setup code for
DBox2 devices.
Signed-off-by: Jochen Friedrich <[email protected]>
---
arch/powerpc/boot/dts/dbox2.dts | 263 ++++++++
arch/powerpc/configs/dbox2_defconfig | 1042 ++++++++++++++++++++++++++++++
arch/powerpc/platforms/8xx/Kconfig | 7 +
arch/powerpc/platforms/8xx/Makefile | 1 +
arch/powerpc/platforms/8xx/dbox2.h | 30 +
arch/powerpc/platforms/8xx/dbox2_setup.c | 226 +++++++
include/asm-powerpc/mpc8xx.h | 4 +
7 files changed, 1573 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/dbox2.dts
create mode 100644 arch/powerpc/configs/dbox2_defconfig
create mode 100644 arch/powerpc/platforms/8xx/dbox2.h
create mode 100644 arch/powerpc/platforms/8xx/dbox2_setup.c
diff --git a/arch/powerpc/boot/dts/dbox2.dts b/arch/powerpc/boot/dts/dbox2.dts
new file mode 100644
index 0000000..8d91510
--- /dev/null
+++ b/arch/powerpc/boot/dts/dbox2.dts
@@ -0,0 +1,263 @@
+/*
+ * DBOX2 Device Tree Source
+ *
+ * Copyright 2007 Jochen Friedrich <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "Dbox2";
+ compatible = "betaresearch,dbox2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,823@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <d#16>;
+ i-cache-line-size = <d#16>;
+ d-cache-size = <d#1024>;
+ i-cache-size = <d#2048>;
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ interrupts = <f 2>; // decrementer interrupt
+ interrupt-parent = <&PIC>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 2000000>;
+ };
+
+ localbus@8000000 {
+ compatible = "betaresearch,dbox2-localbus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <8000000 18000000>;
+
+ ranges = <0 8000000 18000000>;
+
+ enx@0 {
+ compatible = "c-cube,enx";
+ reg = <0 3400 1000000 200000>;
+ interrupts = <2 2>;
+ interrupt-parent = <&PIC>;
+ };
+
+ gtx@0 {
+ compatible = "c-cube,gtx";
+ reg = <400000 3000 0 200000>;
+ interrupts = <2 2>;
+ interrupt-parent = <&PIC>;
+ };
+
+ fp@0 {
+ compatible = "betaresearch,dbox2-fp";
+ interrupts = <4 2>;
+ interrupt-parent = <&PIC>;
+ gpios = <0 e>;
+ gpio-parent = <&CPM1_PIO>;
+ };
+
+ fe@0 {
+ compatible = "betaresearch,dbox2-fe";
+ interrupts = <e 2>;
+ interrupt-parent = <&PIC>;
+ };
+
+ avia@2000000 {
+ compatible = "c-cube,avia";
+ reg = <2000000 200>;
+ interrupts = <8 2>;
+ interrupt-parent = <&PIC>;
+ };
+ cam@4000000 {
+ compatible = "betaresearch,dbox2-cam";
+ reg = <4000000 20000>;
+ interrupts = <6 2>;
+ interrupt-parent = <&PIC>;
+ gpios = <1 1c 1 1d 1 1e 1 1f>;
+ gpio-parent = <&CPM1_PIO>;
+ };
+
+ cam@4040000 {
+ compatible = "betaresearch,dbox2-cam";
+ reg = <4040000 20000>;
+ interrupts = <6 2>;
+ interrupt-parent = <&PIC>;
+ gpios = <1 1c 1 1d 1 1e 1 1f>;
+ gpio-parent = <&CPM1_PIO>;
+ };
+
+ flash@8000000 {
+ // Flash also has info about model needed by setup
+ compatible = "cfi-flash",
+ "betaresearch,dbox2-config";
+ reg = <8000000 800000>;
+ bank-width = <4>;
+ device-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "BR bootloader";
+ reg = <0 20000>;
+ read-only;
+ };
+ partition@20000 {
+ label = "FLFS (U-Boot)";
+ reg = <20000 20000>;
+ };
+ partition@40000 {
+ label = "rootfs";
+ reg = <40000 7c0000>;
+ };
+ ovpartition@20000 {
+ label = "Flash without bootloader";
+ reg = <20000 7e0000>;
+ };
+ ovpartition@0 {
+ label = "Complete Flash";
+ reg = <0 800000>;
+ read-only;
+ };
+ };
+ };
+
+ soc@ff000000 {
+ compatible = "fsl,mpc823",
+ "fsl,pq1-soc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0 ff000000 00004000>;
+ reg = <ff000000 00004000>;
+ bus-frequency = <0>;
+
+ PIC: pic@0 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0 24>;
+ compatible = "fsl,mpc823-pic",
+ "fsl,pq1-pic";
+ };
+
+ wdt@0 {
+ device_type = "watchdog";
+ compatible = "fsl,mpc823-wdt",
+ "fsl,pq1-wdt";
+ reg = <0 10>;
+ };
+
+ cpm@9c0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <9c0 40>;
+ command-proc = <9c0>;
+ interrupts = <0 2>; // cpm error interrupt
+ interrupt-parent = <&CPM_PIC>;
+ compatible = "fsl,mpc823-cpm",
+ "fsl,cpm1";
+
+ muram@2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 2000 2000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0 1c00>;
+ };
+ };
+
+ // Port D is LCD exclusive. Don't export as GPIO
+ CPM1_PIO: pio@970 {
+ compatible = "fsl,cpm1-pario";
+ reg = <970 180>;
+ num-ports = <3>;
+ #gpio-cells = <2>;
+ };
+
+ lcd@970 {
+ reg = <970 10>;
+ compatible = "samsung,ks0713";
+ };
+
+ brg@9f0 {
+ compatible = "fsl,mpc823-brg",
+ "fsl,cpm1-brg",
+ "fsl,cpm-brg";
+ reg = <9f0 10>;
+ };
+
+ CPM_PIC: pic@930 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <5 2 0 2>;
+ interrupt-parent = <&PIC>;
+ reg = <930 20>;
+ compatible = "fsl,mpc823-cpm-pic",
+ "fsl,cpm1-pic";
+ };
+
+ serial@a80 {
+ device_type = "serial";
+ compatible = "fsl,mpc823-smc-uart",
+ "fsl,cpm1-smc-uart";
+ reg = <a80 10 3e80 40>;
+ interrupts = <4 3>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-brg = <1>;
+ fsl,cpm-command = <0090>;
+ };
+
+ serial@a90 {
+ device_type = "serial";
+ compatible = "fsl,mpc823-smc-uart",
+ "fsl,cpm1-smc-uart";
+ reg = <a90 10 3f80 40>;
+ interrupts = <3 3>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-brg = <2>;
+ fsl,cpm-command = <00d0>;
+ };
+
+ ethernet@a00 {
+ device_type = "network";
+ compatible = "fsl,mpc823-scc-enet",
+ "fsl,cpm1-scc-enet";
+ reg = <a20 20 3d00 80>;
+ interrupts = <1d 3>;
+ interrupt-parent = <&CPM_PIC>;
+ fixed-link = <1 0 d#10>;
+ fsl,cpm-command = <0040>;
+ linux,network-index = <0>;
+ };
+
+ i2c@860 {
+ compatible = "fsl,mpc823-i2c",
+ "fsl,cpm1-i2c",
+ "fsl,cpm-i2c";
+ reg = <860 20 3c80 30>;
+ interrupts = <10 3>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-command = <0010>;
+ };
+ };
+ };
+ chosen {
+ linux,stdout-path = "/soc/cpm/serial@a80";
+ };
+};
diff --git a/arch/powerpc/configs/dbox2_defconfig b/arch/powerpc/configs/dbox2_defconfig
new file mode 100644
index 0000000..7876a6b
--- /dev/null
+++ b/arch/powerpc/configs/dbox2_defconfig
@@ -0,0 +1,1042 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Sat Dec 22 19:55:33 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+CONFIG_PPC_8xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_8xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_CPM1=y
+# CONFIG_MPC8XXFADS is not set
+# CONFIG_MPC86XADS is not set
+# CONFIG_MPC885ADS is not set
+# CONFIG_PPC_EP88XC is not set
+CONFIG_DBOX2=y
+
+#
+# MPC8xx CPM Options
+#
+
+#
+# Generic MPC8xx Options
+#
+CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_CPU6 is not set
+CONFIG_8xx_CPU15=y
+CONFIG_NO_UCODE_PATCH=y
+# CONFIG_USB_SOF_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_8XX_MINIMAL_FPEMU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="dbox2.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCI_QSPAN is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_HIGHMEM_START=0xfe000000
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_KERNEL_START_BOOL is not set
+CONFIG_KERNEL_START=0xc0000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START_BOOL=y
+CONFIG_CONSISTENT_START=0xe0000000
+# CONFIG_CONSISTENT_SIZE_BOOL is not set
+CONFIG_CONSISTENT_SIZE=0x00200000
+# CONFIG_BOOT_LOAD_BOOL is not set
+CONFIG_BOOT_LOAD=0x00400000
+# CONFIG_PIN_TLB is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+CONFIG_MTD_BLOCK_RO=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_CFI_FLAGADM is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+CONFIG_FIXED_PHY=y
+CONFIG_FIXED_MII_10_FDX=y
+# CONFIG_FIXED_MII_100_FDX is not set
+# CONFIG_FIXED_MII_1000_FDX is not set
+CONFIG_FIXED_MII_AMNT=1
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+# CONFIG_FS_ENET_HAS_FEC is not set
+# CONFIG_FS_ENET_MDIO_FEC is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_8xx_WDT is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DVB_CORE=m
+CONFIG_DVB_CORE_ATTACH=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_MT312 is not set
+CONFIG_DVB_VES1X93=m
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_TDA10086 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_L64781 is not set
+# CONFIG_DVB_TDA1004X is not set
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
+
+#
+# Tuners/PLL support
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TUNER_QT1010 is not set
+# CONFIG_DVB_TUNER_MT2060 is not set
+# CONFIG_DVB_TUNER_MT2266 is not set
+# CONFIG_DVB_TUNER_MT2131 is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+
+#
+# Miscellaneous devices
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6421 is not set
+# CONFIG_DVB_TUA6100 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_OF is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index bd28655..bcd3c40 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -43,6 +43,13 @@ config PPC_EP88XC
This board is also resold by Freescale as the QUICCStart
MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
+config DBOX2
+ bool "DBOX2"
+ select CPM1
+ select PPC_CPM_NEW_BINDING
+ help
+ This enables support for the Betaresearch DBOX2.
+
endchoice
menu "Freescale Ethernet driver platform-specific options"
diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile
index 8b70980..306df8a 100644
--- a/arch/powerpc/platforms/8xx/Makefile
+++ b/arch/powerpc/platforms/8xx/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_8xx) += m8xx_setup.o
obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o
obj-$(CONFIG_PPC_EP88XC) += ep88xc.o
+obj-$(CONFIG_DBOX2) += dbox2_setup.o
diff --git a/arch/powerpc/platforms/8xx/dbox2.h b/arch/powerpc/platforms/8xx/dbox2.h
new file mode 100644
index 0000000..de3f674
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/dbox2.h
@@ -0,0 +1,30 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the DBox2.
+ *
+ * Author: (c) 2007 Jochen Friedrich
+ *
+ * This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_DBOX2_H__
+#define __ASM_DBOX2_H__
+
+/* Vendor information in BR Bootloader
+ */
+
+#define DBOX2_VENDOR_OFFSET (0x1ffe0)
+
+enum dbox2_mid {
+ DBOX2_MID_NOKIA = 1,
+ DBOX2_MID_PHILIPS = 2,
+ DBOX2_MID_SAGEM = 3,
+};
+
+enum dbox2_mid dbox2_get_mid(void);
+
+#endif /* __ASM_DBOX2_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/8xx/dbox2_setup.c b/arch/powerpc/platforms/8xx/dbox2_setup.c
new file mode 100644
index 0000000..1a3a53c
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/dbox2_setup.c
@@ -0,0 +1,226 @@
+/*
+ * Platform setup for the DBox2
+ *
+ * Copyright 2007 Jochen Friedrich <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
+#include <linux/mii.h>
+#include <linux/of_platform.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+
+#include <sysdev/commproc.h>
+
+static const char *dbox2_manuf_name[3] = {
+ "Nokia",
+ "Philips",
+ "Sagem",
+};
+
+static enum dbox2_mid dbox2_manuf_id;
+
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static const struct cpm_pin dbox2_pins[] = {
+ /* SMC1 (Serial 1) */
+ {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RXD */
+ {CPM_PORTB, 25, CPM_PIN_INPUT}, /* TXD */
+ {CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_GPIO}, /* DCD */
+ {CPM_PORTC, 6, CPM_PIN_INPUT | CPM_PIN_GPIO}, /* DSR */
+ {CPM_PORTC, 7, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, /* DTR */
+ {CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_GPIO}, /* CTS */
+ {CPM_PORTC, 11, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, /* RTS */
+
+ /* SMC2 (Serial 2) */
+ {CPM_PORTA, 7, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, /* */
+ {CPM_PORTA, 8, CPM_PIN_INPUT}, /* TXD */
+ {CPM_PORTA, 9, CPM_PIN_INPUT}, /* RXD */
+ {CPM_PORTB, 16, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, /* DTR */
+ {CPM_PORTB, 17, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, /* RTS */
+ {CPM_PORTB, 18, CPM_PIN_INPUT | CPM_PIN_GPIO}, /* */
+ {CPM_PORTB, 19, CPM_PIN_INPUT | CPM_PIN_GPIO}, /* */
+ {CPM_PORTB, 22, CPM_PIN_INPUT | CPM_PIN_GPIO}, /* */
+ {CPM_PORTB, 23, CPM_PIN_INPUT | CPM_PIN_GPIO}, /* */
+ {CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_GPIO}, /* CTS */
+ {CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_GPIO}, /* DCD */
+
+ /* SSC2 (Ethernet) */
+ {CPM_PORTA, 4, CPM_PIN_INPUT}, /* RCLK */
+ {CPM_PORTA, 6, CPM_PIN_INPUT}, /* TCLK */
+ {CPM_PORTA, 12, CPM_PIN_INPUT}, /* TXD */
+ {CPM_PORTA, 13, CPM_PIN_INPUT}, /* RXD */
+ /* RENA */
+ {CPM_PORTC, 8, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+ /* CLSN */
+ {CPM_PORTC, 9, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+ {CPM_PORTC, 14, CPM_PIN_INPUT}, /* TENA */
+
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_OUTPUT | CPM_PIN_OPENDRAIN}, /* SCL */
+ {CPM_PORTB, 27, CPM_PIN_OUTPUT | CPM_PIN_OPENDRAIN}, /* SDA */
+
+ /* CAM */
+ {CPM_PORTB, 28, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTB, 29, CPM_PIN_OUTPUT | CPM_PIN_GPIO | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 30, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTB, 31, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+
+ /* LCD */
+ {CPM_PORTD, 4, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 5, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 6, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 7, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 8, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 9, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 10, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 11, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 12, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 14, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+ {CPM_PORTD, 15, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+
+ /* FP */
+ {CPM_PORTA, 14, CPM_PIN_OUTPUT | CPM_PIN_GPIO | CPM_PIN_OPENDRAIN},
+};
+
+enum dbox2_mid dbox2_get_mid(void)
+{
+ return dbox2_manuf_id;
+}
+EXPORT_SYMBOL_GPL(dbox2_get_mid);
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dbox2_pins); i++) {
+ const struct cpm_pin *pin = &dbox2_pins[i];
+ cpm1_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+ cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
+ cpm1_clk_setup(CPM_CLK_SCC2, CPM_CLK2, CPM_CLK_TX);
+ cpm1_clk_setup(CPM_CLK_SCC2, CPM_CLK4, CPM_CLK_RX);
+
+}
+
+static void __init dbox2_setup_arch(void)
+{
+ struct device_node *np;
+ static u8 __iomem *config;
+
+ cpm_reset();
+ init_ioports();
+
+ /* Enable external IRQs for AVIA chips */
+ clrbits32(&mpc8xx_immr->im_siu_conf.sc_siumcr, 0x00000c00);
+
+ dbox2_manuf_id = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "betaresearch,dbox2-config");
+ if (!np) {
+ printk(KERN_CRIT
+ "Could not find betaresearch,dbox2-config node\n");
+ return;
+ }
+ config = of_iomap(np, 0);
+ dbox2_manuf_id = in_8(config + DBOX2_VENDOR_OFFSET);
+
+ of_node_put(np);
+ iounmap(config);
+
+ if ((dbox2_manuf_id < DBOX2_MID_NOKIA) ||
+ (dbox2_manuf_id > DBOX2_MID_SAGEM)) {
+ printk(KERN_ERR "dbox2: invalid config area!\n");
+ return;
+ }
+
+ printk(KERN_INFO "dbox2: %s board detected.\n",
+ dbox2_manuf_name[dbox2_manuf_id-1]);
+
+ if (dbox2_manuf_id == DBOX2_MID_NOKIA)
+ np = of_find_node_by_path("/localbus@8000000/enx@0");
+ else
+ np = of_find_node_by_path("/localbus@8000000/gtx@0");
+
+ if (np) {
+ of_detach_node(np);
+ of_node_put(np);
+ }
+
+ if (dbox2_manuf_id == DBOX2_MID_PHILIPS)
+ np = of_find_node_by_path("/localbus@8000000/cam@4000000");
+ else
+ np = of_find_node_by_path("/localbus@8000000/cam@4040000");
+
+ if (np) {
+ of_detach_node(np);
+ of_node_put(np);
+ }
+}
+
+static int __init dbox2_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "betaresearch,dbox2");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ /* Publish the QE devices */
+ if (machine_is(dbox2))
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+device_initcall(declare_of_platform_devices);
+
+define_machine(dbox2) {
+ .name = "DBox2",
+ .probe = dbox2_probe,
+ .setup_arch = dbox2_setup_arch,
+ .init_IRQ = m8xx_pic_init,
+ .get_irq = mpc8xx_get_irq,
+ .restart = mpc8xx_restart,
+ .calibrate_decr = mpc8xx_calibrate_decr,
+ .set_rtc_time = mpc8xx_set_rtc_time,
+ .get_rtc_time = mpc8xx_get_rtc_time,
+ .progress = udbg_progress,
+};
diff --git a/include/asm-powerpc/mpc8xx.h b/include/asm-powerpc/mpc8xx.h
index 2be014b..b6fd7d6 100644
--- a/include/asm-powerpc/mpc8xx.h
+++ b/include/asm-powerpc/mpc8xx.h
@@ -23,6 +23,10 @@
#include <platforms/8xx/mpc885ads.h>
#endif
+#if defined(CONFIG_DBOX2)
+#include <platforms/8xx/dbox2.h>
+#endif
+
#ifdef CONFIG_PCMCIA_M8XX
extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
#endif
--
1.5.3.7
On Sunday 23 December 2007, Jochen Friedrich wrote:
> This patch adds device tree source, default config and setup code for
> DBox2 devices.
Cool stuff. I used to have one of these boxes myself, maybe I should
get one again when it's hitting mainline.
Is this already a complete port, or do you also need some device
drivers or boot wrapper code to go along with it?
> + memory {
> + device_type = "memory";
> + reg = <0 2000000>;
> + };
I thought there are both models with 32MB and 16MB available.
If that's true, shouldn't this be filled out by the boot loader?
> +#
> +# Frame buffer hardware drivers
> +#
> +# CONFIG_FB_OF is not set
> +# CONFIG_FB_VGA16 is not set
> +# CONFIG_FB_S1D13XXX is not set
> +# CONFIG_FB_IBM_GXT4500 is not set
> +# CONFIG_FB_VIRTUAL is not set
> +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
No hardware framebuffer driver? Can't you use
the FB_OF driver by default? I'd guess that a
set-top box without output is rather pointless ;-)
> +# DOS/FAT/NT Filesystems
> +#
> +CONFIG_FAT_FS=y
> +CONFIG_MSDOS_FS=y
> +CONFIG_VFAT_FS=y
> +CONFIG_FAT_DEFAULT_CODEPAGE=437
> +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> +# CONFIG_NTFS_FS is not set
What media can you connect that use the FAT file system?
I'd guess that if you can get rid of these, you can also
disable the entire block layer, which should free up
some kernel memory.
> @@ -0,0 +1,30 @@
> +/*
> + * A collection of structures, addresses, and values associated with
> + * the DBox2.
> + *
> + * Author: (c) 2007 Jochen Friedrich
> + *
> + * This file is licensed under the
> + * terms of the GNU General Public License version 2. This program is licensed
> + * "as is" without any warranty of any kind, whether express or implied.
> + */
> +
> +#ifdef __KERNEL__
> +#ifndef __ASM_DBOX2_H__
> +#define __ASM_DBOX2_H__
You don't need the #ifdef __KERNEL__ any more if you don't have
any user-visible parts in the header. Just leave it out of the
list of exported header files (as you already do).
> +
> +/* Vendor information in BR Bootloader
> + */
> +
> +#define DBOX2_VENDOR_OFFSET (0x1ffe0)
> +
> +enum dbox2_mid {
> + DBOX2_MID_NOKIA = 1,
> + DBOX2_MID_PHILIPS = 2,
> + DBOX2_MID_SAGEM = 3,
> +};
> +
> +enum dbox2_mid dbox2_get_mid(void);
Can you move this functionality from the kernel to the boot wrapper?
It looks like this is something that really belongs into the device
tree.
> +static void __init dbox2_setup_arch(void)
> +{
> + struct device_node *np;
> + static u8 __iomem *config;
> +
> + cpm_reset();
> + init_ioports();
> +
> + /* Enable external IRQs for AVIA chips */
> + clrbits32(&mpc8xx_immr->im_siu_conf.sc_siumcr, 0x00000c00);
This smells like a hack. What are AVIA chips, and shouldn't
their driver enable the IRQs?
> + if (dbox2_manuf_id == DBOX2_MID_NOKIA)
> + np = of_find_node_by_path("/localbus@8000000/enx@0");
> + else
> + np = of_find_node_by_path("/localbus@8000000/gtx@0");
> +
> + if (np) {
> + of_detach_node(np);
> + of_node_put(np);
> + }
> +
> + if (dbox2_manuf_id == DBOX2_MID_PHILIPS)
> + np = of_find_node_by_path("/localbus@8000000/cam@4000000");
> + else
> + np = of_find_node_by_path("/localbus@8000000/cam@4040000");
> +
> + if (np) {
> + of_detach_node(np);
> + of_node_put(np);
> + }
> +}
What is this code for? Why do you want to detach nodes from the device
tree that have been put in there by the boot loader?
> +static struct of_device_id __initdata of_bus_ids[] = {
> + { .name = "soc", },
> + { .name = "cpm", },
> + { .name = "localbus", },
> + {},
> +};
Shouldn't this check for 'compatible' properties instead of 'name'?
> +static int __init declare_of_platform_devices(void)
> +{
> + /* Publish the QE devices */
> + if (machine_is(dbox2))
> + of_platform_bus_probe(NULL, of_bus_ids, NULL);
> +
> + return 0;
> +}
> +device_initcall(declare_of_platform_devices);
This is a candidate for the new platform_initcall stuff.
I also once did a patch that let you have a default 'of_bus_ids'
member in the ppc_md. I never got around to submitting that, but
if there is interest, I can dig it out again.
> --- a/include/asm-powerpc/mpc8xx.h
> +++ b/include/asm-powerpc/mpc8xx.h
> @@ -23,6 +23,10 @@
> #include <platforms/8xx/mpc885ads.h>
> #endif
>
> +#if defined(CONFIG_DBOX2)
> +#include <platforms/8xx/dbox2.h>
> +#endif
> +
Don't hide #includes or platform specific #defines in #ifdef.
Arnd <><
Hi Arnd,
>> This patch adds device tree source, default config and setup code for
>> DBox2 devices.
>
ia > Cool stuff. I used to have one of these boxes myself, maybe I should
> get one again when it's hitting mainline.
>
> Is this already a complete port, or do you also need some device
> drivers or boot wrapper code to go along with it?
Currently, it needs the u-boot patches from cvs.tuxbox.org and some
external device drivers (however, they can all be loaded as modules).
The port is complete enough to get a console on the serial port and
a rootfs either on flash or on nfs.
>> + memory {
>> + device_type = "memory";
>> + reg = <0 2000000>;
>> + };
>
> I thought there are both models with 32MB and 16MB available.
> If that's true, shouldn't this be filled out by the boot loader?
IIRC, the cuImage wrapper overwrites this with the boot loader
parameters.
OTOH, the memory is part of the localbus (CS1). Should it be a child
of localbus in this case?
>> +#
>> +# Frame buffer hardware drivers
>> +#
>> +# CONFIG_FB_OF is not set
>> +# CONFIG_FB_VGA16 is not set
>> +# CONFIG_FB_S1D13XXX is not set
>> +# CONFIG_FB_IBM_GXT4500 is not set
>> +# CONFIG_FB_VIRTUAL is not set
>> +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
>
> No hardware framebuffer driver? Can't you use
> the FB_OF driver by default? I'd guess that a
> set-top box without output is rather pointless ;-)
I didn't check FB_OF. On Dbox2, the avia driver creates a
framebuffer device.
>> +# DOS/FAT/NT Filesystems
>> +#
>> +CONFIG_FAT_FS=y
>> +CONFIG_MSDOS_FS=y
>> +CONFIG_VFAT_FS=y
>> +CONFIG_FAT_DEFAULT_CODEPAGE=437
>> +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
>> +# CONFIG_NTFS_FS is not set
>
> What media can you connect that use the FAT file system?
>
> I'd guess that if you can get rid of these, you can also
> disable the entire block layer, which should free up
> some kernel memory.
There are two mods available using the block layer, although currently i don't
support any of them:
1. using the GPIO lines of the modem port, it's possible to connect a SD card.
It might be possible to use it using the GPIO SPI driver (but it would need
some glue code to create a platform device).
2. using the memory expansion port and CS2, there is an IDE interface available
with a CPLD acting as localbus/IDE bridge. There is a device driver for
ARCH=ppc.
Unfortunately, i don't own any of these modifications.
>> +
>> +/* Vendor information in BR Bootloader
>> + */
>> +
>> +#define DBOX2_VENDOR_OFFSET (0x1ffe0)
>> +
>> +enum dbox2_mid {
>> + DBOX2_MID_NOKIA = 1,
>> + DBOX2_MID_PHILIPS = 2,
>> + DBOX2_MID_SAGEM = 3,
>> +};
>> +
>> +enum dbox2_mid dbox2_get_mid(void);
>
> Can you move this functionality from the kernel to the boot wrapper?
> It looks like this is something that really belongs into the device
> tree.
OK.
>> + if (dbox2_manuf_id == DBOX2_MID_NOKIA)
>> + np = of_find_node_by_path("/localbus@8000000/enx@0");
>> + else
>> + np = of_find_node_by_path("/localbus@8000000/gtx@0");
>> +
>> + if (np) {
>> + of_detach_node(np);
>> + of_node_put(np);
>> + }
>> +
>> + if (dbox2_manuf_id == DBOX2_MID_PHILIPS)
>> + np = of_find_node_by_path("/localbus@8000000/cam@4000000");
>> + else
>> + np = of_find_node_by_path("/localbus@8000000/cam@4040000");
>> +
>> + if (np) {
>> + of_detach_node(np);
>> + of_node_put(np);
>> + }
>> +}
>
> What is this code for? Why do you want to detach nodes from the device
> tree that have been put in there by the boot loader?
There are small differences between the 3 manufacturers. I guess this
should go to the boot wrapper, as well.
This is even more important if the localbus uses #address-cells = <2>, as
the differen manufacturers set up the address mapping for CS3, CS5 and CS7
differently.
>> +static void __init dbox2_setup_arch(void)
>> +{
>> + struct device_node *np;
>> + static u8 __iomem *config;
>> +
>> + cpm_reset();
>> + init_ioports();
>> +
>> + /* Enable external IRQs for AVIA chips */
>> + clrbits32(&mpc8xx_immr->im_siu_conf.sc_siumcr, 0x00000c00);
>
> This smells like a hack. What are AVIA chips, and shouldn't
> their driver enable the IRQs?
No. This just configures the Pin as IRQ input. Maybe, the new GPIO
functions could be used for this, instead. Then it could be done
in the driver (the driver should't directly mess with SIU internals).
>> +static struct of_device_id __initdata of_bus_ids[] = {
>> + { .name = "soc", },
>> + { .name = "cpm", },
>> + { .name = "localbus", },
>> + {},
>> +};
>
> Shouldn't this check for 'compatible' properties instead of 'name'?
I copied this from mpc885ads_setup.c.
>> +static int __init declare_of_platform_devices(void)
>> +{
>> + /* Publish the QE devices */
>> + if (machine_is(dbox2))
>> + of_platform_bus_probe(NULL, of_bus_ids, NULL);
>> +
>> + return 0;
>> +}
>> +device_initcall(declare_of_platform_devices);
>
> This is a candidate for the new platform_initcall stuff.
>
> I also once did a patch that let you have a default 'of_bus_ids'
> member in the ppc_md. I never got around to submitting that, but
> if there is interest, I can dig it out again.
That would be nice :)
>> --- a/include/asm-powerpc/mpc8xx.h
>> +++ b/include/asm-powerpc/mpc8xx.h
>> @@ -23,6 +23,10 @@
>> #include <platforms/8xx/mpc885ads.h>
>> #endif
>>
>> +#if defined(CONFIG_DBOX2)
>> +#include <platforms/8xx/dbox2.h>
>> +#endif
>> +
>
> Don't hide #includes or platform specific #defines in #ifdef.
As soon as the manufacturer info is included in the device tree,
dbox2.h is no longer needed.
Thanks,
Jochen
On Wednesday 26 December 2007, Jochen Friedrich wrote:
> >> + memory {
> >> + device_type = "memory";
> >> + reg = <0 2000000>;
> >> + };
> >
> > I thought there are both models with 32MB and 16MB available.
> > If that's true, shouldn't this be filled out by the boot loader?
>
> IIRC, the cuImage wrapper overwrites this with the boot loader
> parameters.
Then maybe set it to zero size in the dts file, and add a comment.
> OTOH, the memory is part of the localbus (CS1). Should it be a child
> of localbus in this case?
No, memory nodes are required to be at the root of the device tree
for historic reasons.
> I didn't check FB_OF. On Dbox2, the avia driver creates a
> framebuffer device.
fb_of needs some properties in the device tree set up correctly,
but is very simple otherwise. If it does all you need, it's
probably a good idea to use that and get rid of the avia framebuffer
driver
> There are two mods available using the block layer, although currently i don't
> support any of them:
>
> 1. using the GPIO lines of the modem port, it's possible to connect a SD card.
> It might be possible to use it using the GPIO SPI driver (but it would need
> some glue code to create a platform device).
>
> 2. using the memory expansion port and CS2, there is an IDE interface available
> with a CPLD acting as localbus/IDE bridge. There is a device driver for
> ARCH=ppc.
>
> Unfortunately, i don't own any of these modifications.
If neither of these is in the mainline kernel, it doesn't make sense to
have support for the block layer in defconfig, so just try how much
memory you can free up with this.
> >> +static void __init dbox2_setup_arch(void)
> >> +{
> >> + struct device_node *np;
> >> + static u8 __iomem *config;
> >> +
> >> + cpm_reset();
> >> + init_ioports();
> >> +
> >> + /* Enable external IRQs for AVIA chips */
> >> + clrbits32(&mpc8xx_immr->im_siu_conf.sc_siumcr, 0x00000c00);
> >
> > This smells like a hack. What are AVIA chips, and shouldn't
> > their driver enable the IRQs?
>
> No. This just configures the Pin as IRQ input. Maybe, the new GPIO
> functions could be used for this, instead. Then it could be done
> in the driver (the driver should't directly mess with SIU internals).
Maybe it should then be done in the boot wrapper. If the device
tree lists this line as an interrupt, I'd say that is what it should
be.
> >> +static struct of_device_id __initdata of_bus_ids[] = {
> >> + { .name = "soc", },
> >> + { .name = "cpm", },
> >> + { .name = "localbus", },
> >> + {},
> >> +};
> >
> > Shouldn't this check for 'compatible' properties instead of 'name'?
>
> I copied this from mpc885ads_setup.c.
Right, I noticed before that we're rather inconsistent with this.
It would really be good to have more common standards on this.
> > I also once did a patch that let you have a default 'of_bus_ids'
> > member in the ppc_md. I never got around to submitting that, but
> > if there is interest, I can dig it out again.
>
> That would be nice :)
The reason I haven't submitted it yet is that I'm not sure whether
there are cases where we actually _need_ to test for 'name' instead
of 'compatible' because of existing device trees in firmware.
I might just do a patch and see if someone complains about the
idea.
Arnd <><