Hi,
I have a 32-bit user land application which sends an IOCTL to a 64-bit
Kernel module. I have a few different cmd codes that I can send through
the IOCTL. For some reason I seem to always get the same IOCTL cmd from
user land, no matter what the ioctl() call is given. This cmd code that
I get has some bytes (W/R and the module code) that are OK, but the rest
is just garbage or zeros. This was originally a 32-bit system, and we
are no converting the Kernel module to 64-bit, so maybe there's
something special for 32-64 communication that miss.
I am working on Linux Kernel v2.6.18.
Thanks
Thanks. I am aware of these issues and we already have a pretty capable
layer to deal with these issues (unfortunately, it was very necessary).
My problem is not with the data carried by the IOCTL, but with IOCTL
command code itself, which comes out wrong on the kernel side. And my
problem is not only in the size data, but also in other fields.
IOCTL command code:
1 byte: W/R/RW -------- Passes
through fine
1 byte: size of data carried -------- DOESN'T
PASS THROUGH
1 byte: identifier character of the module -------- Passes through fine
1 byte: IOCTL number -------- DOESN'T PASS
THROUGH
The funny thing is that I always get the same IOCTL command code on the
kernel side, no matter what I send using the ioctl() system call.
Any idea?
Thanks
-------- Original Message --------
Subject: Re: Sending IOCTLs from 32-bit userland to 64-bit Kernel module
From: Michael Tokarev <[email protected]>
To: Yoav Artzi <[email protected]>
Date: Tuesday, January 29, 2008 3:05:01 PM
> Yoav Artzi wrote:
>
>> Hi,
>>
>>
>> I have a 32-bit user land application which sends an IOCTL to a 64-bit
>> Kernel module. I have a few different cmd codes that I can send through
>> the IOCTL. For some reason I seem to always get the same IOCTL cmd from
>> user land, no matter what the ioctl() call is given. This cmd code that
>> I get has some bytes (W/R and the module code) that are OK, but the rest
>> is just garbage or zeros. This was originally a 32-bit system, and we
>> are no converting the Kernel module to 64-bit, so maybe there's
>> something special for 32-64 communication that miss.
>>
>
> Please see numerous examples in kernel source, in many files named
> compat_ioctl.c. If your ioctls uses structures with fields that
> have different sizes in 32- and 64-bit worlds (most notable int,
> various enums etc), there should be corresponding translation
> layer as in those examples. If it's your kernel code, that is.
> (And try to avoid such types there, use u32 or u64 and the like
> that explicitly specify size).
>
> Another possible problem is different alignment of fields in
> 64- vs 32-bits worlds.
>
>
>> I am working on Linux Kernel v2.6.18.
>>
>
> If the kernel side isn't your code, the chances are quite high
> that this problem has long been fixed in more recent kernels.
>
> /mjt
>
> Scanned by Check Point Total Security Gateway.
>
>
On 01/29/2008 02:18 PM, Yoav Artzi wrote:
> Thanks. I am aware of these issues and we already have a pretty capable
> layer to deal with these issues (unfortunately, it was very necessary).
> My problem is not with the data carried by the IOCTL, but with IOCTL
> command code itself, which comes out wrong on the kernel side. And my
> problem is not only in the size data, but also in other fields.
>
> IOCTL command code:
>
> 1 byte: W/R/RW -------- Passes
> through fine
>
> 1 byte: size of data carried -------- DOESN'T
> PASS THROUGH
>
> 1 byte: identifier character of the module -------- Passes through fine
>
> 1 byte: IOCTL number -------- DOESN'T PASS
> THROUGH
>
>
> The funny thing is that I always get the same IOCTL command code on the
> kernel side, no matter what I send using the ioctl() system call.
>
>
> Any idea?
Please show us your code with ioctls implemented both in kernel and userspace.
And the definitions and fops aswell. Without it it's very hard to say what's
going wrong.