2008-02-17 17:23:23

by Leonardo Potenza

[permalink] [raw]
Subject: [PATCH] drivers/net/cs89x0.c: compilation warning fix

From: Leonardo Potenza <[email protected]>

Suppress the warning message about the 'netcard_portlist' defined but not used.

Signed-off-by: Leonardo Potenza <[email protected]>
---

When building cs89x0 as a module, the following warning message is generated:
drivers/net/cs89x0.c:198: warning: 'netcard_portlist' defined but not used

Since the netcard_portlist is not so big, I just marked the array as __used.

--- linux-2.6.orig/drivers/net/cs89x0.c
+++ linux-2.6/drivers/net/cs89x0.c
@@ -172,30 +172,30 @@ static char version[] __initdata =
them to system IRQ numbers. This mapping is card specific and is set to
the configuration of the Cirrus Eval board for this chip. */
#ifdef CONFIG_ARCH_CLPS7500
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
{ 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
static unsigned int cs8900_irq_map[] = {12,0,0,0};
#elif defined(CONFIG_SH_HICOSH4)
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
{ 0x0300, 0};
static unsigned int cs8900_irq_map[] = {1,0,0,0};
#elif defined(CONFIG_MACH_IXDP2351)
-static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
#include <asm/irq.h>
#elif defined(CONFIG_ARCH_IXDP2X01)
#include <asm/irq.h>
-static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_PNX010X)
#include <asm/irq.h>
#include <asm/arch/gpio.h>
#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
-static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
#else
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
static unsigned int cs8900_irq_map[] = {10,11,12,5};
#endif


2008-02-20 16:51:51

by Jeff Garzik

[permalink] [raw]
Subject: Re: [PATCH] drivers/net/cs89x0.c: compilation warning fix

Leonardo Potenza wrote:
> From: Leonardo Potenza <[email protected]>
>
> Suppress the warning message about the 'netcard_portlist' defined but not used.
>
> Signed-off-by: Leonardo Potenza <[email protected]>
> ---
>
> When building cs89x0 as a module, the following warning message is generated:
> drivers/net/cs89x0.c:198: warning: 'netcard_portlist' defined but not used
>
> Since the netcard_portlist is not so big, I just marked the array as __used.

applied