2008-07-16 17:00:28

by [email protected]

[permalink] [raw]
Subject: kernel oops with framebuffer device vt8623fb

Hi!

I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found
a problem.

If I load the module vt8623fb i get a kernel oops, if the VIA 8623
display framebuffer driver is compiled direct into kernel the system
hangs up very early at booting the kernel.

At first my Hardware: A VIA Nehemiah 1GHz CPU with 1GB RAM, VIA VT 8623
hostbridge, a Transcent CF-Card as hdc and a Western Digital 250GB HDD
as hdd (altough, the devices are mixed up since 2.6.26, they are now hda
and hdb). The Mainboard itself is a Lex Twister System CV-863A
Here is my lspci output:
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82)
00:0c.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82)
00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo
CLE266] integrated CastleRock graphics (rev 03)

With 2.6.25.11 I get the following output on system startup. The
vt8623fb is compiled into the kernel, not loaded as module.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
fb0: VIA VT8623 on 0000:01:00.0, 16 MB RAM

As I can use my old 2.6.25.11 kernel without problems I can eliminate a
hardware failure. Altough, the fb-Device is not used, the machine is
without monitor.

If I have compiled in the framebuffer-device in 2.6.26 in the kernel the
system hangs up very early with a oops. If I have compiled as module,
the following oops is generated:

BUG: unable to handle kernel NULL pointer dereference at 000000b8
IP: [<c02a39c0>] dev_driver_string+0x0/0x29
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: vt8623fb(+) svgalib vgastate budget_av saa7146_vv
videobuf_dma_sg videobuf_core budget_core saa7146 ttpci_eeprom tda10021
tda10023 tda1004x

Pid: 3657, comm: modprobe Not tainted (2.6.26 #5)
EIP: 0060:[<c02a39c0>] EFLAGS: 00010286 CPU: 0
EIP is at dev_driver_string+0x0/0x29
EAX: 00000000 EBX: f8e57e00 ECX: 00000010 EDX: 00000004
ESI: 0000008c EDI: f5fe9c00 EBP: 00000000 ESP: ec041de0
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process modprobe (pid: 3657, ti=ec040000 task=ec03d8d0 task.ti=ec040000)
Stack: f8e56408 f7d44000 c0185b44 f5fe9e34 00000010 04d440b4 000719d4
f8e57e90
f8e57e60 f7d44000 c02a5daa c0250f4a f7d4404c 00000000 f8e57e90
c02a5d34
f7d4404c f7d440f4 f8e57e90 c02a5de1 00000000 f8e57e90 f8e57e90
c02a560d
Call Trace:
[<f8e56408>] vt8623_pci_probe+0x283/0x45b [vt8623fb]
[<c0185b44>] sysfs_create_link+0x85/0xc5
[<c02a5daa>] __driver_attach+0x0/0x55
[<c0250f4a>] pci_device_probe+0x36/0x57
[<c02a5d34>] driver_probe_device+0xb4/0x12a
[<c02a5de1>] __driver_attach+0x37/0x55
[<c02a560d>] bus_for_each_dev+0x34/0x56
[<c02a5bd0>] driver_attach+0x11/0x13
[<c02a5daa>] __driver_attach+0x0/0x55
[<c02a5963>] bus_add_driver+0x8a/0x1a7
[<c02419f0>] kset_find_obj+0x18/0x40
[<c02a5f39>] driver_register+0x6d/0xc1
[<c02510e0>] __pci_register_driver+0x2b/0x57
[<c012f73f>] sys_init_module+0x14cd/0x161e
[<c0110b49>] do_page_fault+0x228/0x537
[<c024265d>] prio_tree_insert+0x1b/0x1dd
[<f8e4a021>] svga_tilecopy+0x0/0x100 [svgalib]
[<c01035c1>] sysenter_past_esp+0x6a/0x99
=======================
Code: 5a 85 c0 59 79 20 68 24 d7 5d c0 b9 1b 87 4a c0 31 d2 b8 e8 0e 4e
c0 53 e8 09 47 e7 ff 5a 59 eb 05 b8 ed ff ff ff 5b c3 90 90 90 <8b> 90
b8 00 00 00 85 d2 75 0a 8b 90 b4 00 00 00 85 d2 74 03 8b
EIP: [<c02a39c0>] dev_driver_string+0x0/0x29 SS:ESP 0068:ec041de0
---[ end trace 70dfd8b98995a740 ]---

>>EIP; c02a39c0 No symbols available <=====

At this time there are 3 new modules listed with lsmod, altough I cannot
remove them any more without a reboot.
lsmod
vt8623fb 12948 1
svgalib 8832 1 vt8623fb
vgastate 7680 1 vt8623fb

For compiling the 2.6.26 kernel I did as I always do - i used the
.config from 2.6.25.11 and saved it new. Compiling was without problems
possible.
I am compiling on a debian etch system with gcc 4.1.2

If necessary, I can provide access to the machine - feel free to contact
me (also if any futher information would be helpful).

I hope I have done my first lkml well - if not please don't shout at me,
I've done my best.

kind regards,

Alois

Here is my .config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26
# Wed Jul 16 15:31:30 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y

#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
CONFIG_MVIAC3_2=y
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_X86_PAT is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=2001
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
CONFIG_X86_E_POWERSAVER=y

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=y
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=y
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=y
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_TFTP=y
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=y
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
# CONFIG_BRIDGE_EBT_ULOG is not set
# CONFIG_BRIDGE_EBT_NFLOG is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_INGRESS=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_PLATFORM is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=y
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_AU0828 is not set
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_FB_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_V4L_USB_DRIVERS is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
# CONFIG_DVB_AV7110 is not set
CONFIG_DVB_BUDGET_CORE=m
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
CONFIG_DVB_BUDGET_AV=m

#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=m
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=m
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
CONFIG_DVB_TDA10048=m

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m

#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TUNER_DIB0070 is not set

#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
CONFIG_DVB_ISL6405=m
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# ALSA SoC audio for Freescale SOCs
#

#
# SoC Audio for the Texas Instruments OMAP
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y


2008-07-16 17:16:20

by Alexey Dobriyan

[permalink] [raw]
Subject: Re: kernel oops with framebuffer device vt8623fb

On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
> I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a
> problem.
>
> If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display
> framebuffer driver is compiled direct into kernel the system hangs up very
> early at booting the kernel.

Of course, info->dev is NULL, info was just kzallocated!

Do
git-revert 20e061fb750d36ec0ffcb2e44ed7dafa9018223b

rebuild, reboot to confirm.

> BUG: unable to handle kernel NULL pointer dereference at 000000b8
> IP: [<c02a39c0>] dev_driver_string+0x0/0x29
> *pde = 00000000
> Oops: 0000 [#1]
> Modules linked in: vt8623fb(+) svgalib vgastate budget_av saa7146_vv
> videobuf_dma_sg videobuf_core budget_core saa7146 ttpci_eeprom tda10021
> tda10023 tda1004x
>
> Pid: 3657, comm: modprobe Not tainted (2.6.26 #5)
> EIP: 0060:[<c02a39c0>] EFLAGS: 00010286 CPU: 0
> EIP is at dev_driver_string+0x0/0x29
> EAX: 00000000 EBX: f8e57e00 ECX: 00000010 EDX: 00000004
> ESI: 0000008c EDI: f5fe9c00 EBP: 00000000 ESP: ec041de0
> DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
> Process modprobe (pid: 3657, ti=ec040000 task=ec03d8d0 task.ti=ec040000)
> Stack: f8e56408 f7d44000 c0185b44 f5fe9e34 00000010 04d440b4 000719d4
> f8e57e90
> f8e57e60 f7d44000 c02a5daa c0250f4a f7d4404c 00000000 f8e57e90
> c02a5d34
> f7d4404c f7d440f4 f8e57e90 c02a5de1 00000000 f8e57e90 f8e57e90
> c02a560d
> Call Trace:
> [<f8e56408>] vt8623_pci_probe+0x283/0x45b [vt8623fb]
> [<c0185b44>] sysfs_create_link+0x85/0xc5
> [<c02a5daa>] __driver_attach+0x0/0x55
> [<c0250f4a>] pci_device_probe+0x36/0x57
> [<c02a5d34>] driver_probe_device+0xb4/0x12a
> [<c02a5de1>] __driver_attach+0x37/0x55
> [<c02a560d>] bus_for_each_dev+0x34/0x56
> [<c02a5bd0>] driver_attach+0x11/0x13
> [<c02a5daa>] __driver_attach+0x0/0x55
> [<c02a5963>] bus_add_driver+0x8a/0x1a7
> [<c02419f0>] kset_find_obj+0x18/0x40
> [<c02a5f39>] driver_register+0x6d/0xc1
> [<c02510e0>] __pci_register_driver+0x2b/0x57
> [<c012f73f>] sys_init_module+0x14cd/0x161e
> [<c0110b49>] do_page_fault+0x228/0x537
> [<c024265d>] prio_tree_insert+0x1b/0x1dd
> [<f8e4a021>] svga_tilecopy+0x0/0x100 [svgalib]
> [<c01035c1>] sysenter_past_esp+0x6a/0x99
> =======================
> Code: 5a 85 c0 59 79 20 68 24 d7 5d c0 b9 1b 87 4a c0 31 d2 b8 e8 0e 4e c0
> 53 e8 09 47 e7 ff 5a 59 eb 05 b8 ed ff ff ff 5b c3 90 90 90 <8b> 90 b8 00
> 00 00 85 d2 75 0a 8b 90 b4 00 00 00 85 d2 74 03 8b
> EIP: [<c02a39c0>] dev_driver_string+0x0/0x29 SS:ESP 0068:ec041de0

2008-07-16 19:30:51

by [email protected]

[permalink] [raw]
Subject: RE: Re: kernel oops with framebuffer device vt8623fb

Hi Alexey,

thanks, now my machine boots, the VT8623 is now recognized correctly on
bootup.

will this issue be reverted or corrected with a 2.6.26.1?

thanks!

kind regards, Alois


Alexey Dobriyan wrote:
> On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
>
>> I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found a
>> problem.
>>
>> If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display
>> framebuffer driver is compiled direct into kernel the system hangs up very
>> early at booting the kernel.
>>
>
> Of course, info->dev is NULL, info was just kzallocated!
>
> Do
> git-revert 20e061fb750d36ec0ffcb2e44ed7dafa9018223b
>
> rebuild, reboot to confirm.
>
>
>> BUG: unable to handle kernel NULL pointer dereference at 000000b8
>> IP: [<c02a39c0>] dev_driver_string+0x0/0x29
>> *pde = 00000000
>> Oops: 0000 [#1]
>> Modules linked in: vt8623fb(+) svgalib vgastate budget_av saa7146_vv
>> videobuf_dma_sg videobuf_core budget_core saa7146 ttpci_eeprom tda10021
>> tda10023 tda1004x
>>
>> Pid: 3657, comm: modprobe Not tainted (2.6.26 #5)
>> EIP: 0060:[<c02a39c0>] EFLAGS: 00010286 CPU: 0
>> EIP is at dev_driver_string+0x0/0x29
>> EAX: 00000000 EBX: f8e57e00 ECX: 00000010 EDX: 00000004
>> ESI: 0000008c EDI: f5fe9c00 EBP: 00000000 ESP: ec041de0
>> DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
>> Process modprobe (pid: 3657, ti=ec040000 task=ec03d8d0 task.ti=ec040000)
>> Stack: f8e56408 f7d44000 c0185b44 f5fe9e34 00000010 04d440b4 000719d4
>> f8e57e90
>> f8e57e60 f7d44000 c02a5daa c0250f4a f7d4404c 00000000 f8e57e90
>> c02a5d34
>> f7d4404c f7d440f4 f8e57e90 c02a5de1 00000000 f8e57e90 f8e57e90
>> c02a560d
>> Call Trace:
>> [<f8e56408>] vt8623_pci_probe+0x283/0x45b [vt8623fb]
>> [<c0185b44>] sysfs_create_link+0x85/0xc5
>> [<c02a5daa>] __driver_attach+0x0/0x55
>> [<c0250f4a>] pci_device_probe+0x36/0x57
>> [<c02a5d34>] driver_probe_device+0xb4/0x12a
>> [<c02a5de1>] __driver_attach+0x37/0x55
>> [<c02a560d>] bus_for_each_dev+0x34/0x56
>> [<c02a5bd0>] driver_attach+0x11/0x13
>> [<c02a5daa>] __driver_attach+0x0/0x55
>> [<c02a5963>] bus_add_driver+0x8a/0x1a7
>> [<c02419f0>] kset_find_obj+0x18/0x40
>> [<c02a5f39>] driver_register+0x6d/0xc1
>> [<c02510e0>] __pci_register_driver+0x2b/0x57
>> [<c012f73f>] sys_init_module+0x14cd/0x161e
>> [<c0110b49>] do_page_fault+0x228/0x537
>> [<c024265d>] prio_tree_insert+0x1b/0x1dd
>> [<f8e4a021>] svga_tilecopy+0x0/0x100 [svgalib]
>> [<c01035c1>] sysenter_past_esp+0x6a/0x99
>> =======================
>> Code: 5a 85 c0 59 79 20 68 24 d7 5d c0 b9 1b 87 4a c0 31 d2 b8 e8 0e 4e c0
>> 53 e8 09 47 e7 ff 5a 59 eb 05 b8 ed ff ff ff 5b c3 90 90 90 <8b> 90 b8 00
>> 00 00 85 d2 75 0a 8b 90 b4 00 00 00 85 d2 74 03 8b
>> EIP: [<c02a39c0>] dev_driver_string+0x0/0x29 SS:ESP 0068:ec041de0
>>
>
>
>

2008-07-17 01:57:55

by Ondrej Zajicek

[permalink] [raw]
Subject: Re: kernel oops with framebuffer device vt8623fb

On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
> Hi!
>
> I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found
> a problem.
>
> If I load the module vt8623fb i get a kernel oops, if the VIA 8623
> display framebuffer driver is compiled direct into kernel the system
> hangs up very early at booting the kernel.

I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:

Signed-off-by: Ondrej Zajicek <[email protected]>

diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff linux-2.6.26-orig/drivers/video/arkfb.c linux-2.6.26/drivers/video/arkfb.c
--- linux-2.6.26-orig/drivers/video/arkfb.c 2008-07-13 23:51:29.000000000 +0200
+++ linux-2.6.26/drivers/video/arkfb.c 2008-07-16 22:56:34.000000000 +0200
@@ -958,20 +958,20 @@ static int __devinit ark_pci_probe(struc
/* Prepare PCI device */
rc = pci_enable_device(dev);
if (rc < 0) {
- dev_err(info->dev, "cannot enable PCI device\n");
+ dev_err(info->device, "cannot enable PCI device\n");
goto err_enable_device;
}

rc = pci_request_regions(dev, "arkfb");
if (rc < 0) {
- dev_err(info->dev, "cannot reserve framebuffer region\n");
+ dev_err(info->device, "cannot reserve framebuffer region\n");
goto err_request_regions;
}

par->dac = ics5342_init(ark_dac_read_regs, ark_dac_write_regs, info);
if (! par->dac) {
rc = -ENOMEM;
- dev_err(info->dev, "RAMDAC initialization failed\n");
+ dev_err(info->device, "RAMDAC initialization failed\n");
goto err_dac;
}

@@ -982,7 +982,7 @@ static int __devinit ark_pci_probe(struc
info->screen_base = pci_iomap(dev, 0, 0);
if (! info->screen_base) {
rc = -ENOMEM;
- dev_err(info->dev, "iomap for framebuffer failed\n");
+ dev_err(info->device, "iomap for framebuffer failed\n");
goto err_iomap;
}

@@ -1004,19 +1004,19 @@ static int __devinit ark_pci_probe(struc
rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
if (! ((rc == 1) || (rc == 2))) {
rc = -EINVAL;
- dev_err(info->dev, "mode %s not found\n", mode_option);
+ dev_err(info->device, "mode %s not found\n", mode_option);
goto err_find_mode;
}

rc = fb_alloc_cmap(&info->cmap, 256, 0);
if (rc < 0) {
- dev_err(info->dev, "cannot allocate colormap\n");
+ dev_err(info->device, "cannot allocate colormap\n");
goto err_alloc_cmap;
}

rc = register_framebuffer(info);
if (rc < 0) {
- dev_err(info->dev, "cannot register framebugger\n");
+ dev_err(info->device, "cannot register framebugger\n");
goto err_reg_fb;
}

@@ -1090,7 +1090,7 @@ static int ark_pci_suspend (struct pci_d
struct fb_info *info = pci_get_drvdata(dev);
struct arkfb_info *par = info->par;

- dev_info(info->dev, "suspend\n");
+ dev_info(info->device, "suspend\n");

acquire_console_sem();
mutex_lock(&(par->open_lock));
@@ -1121,7 +1121,7 @@ static int ark_pci_resume (struct pci_de
struct fb_info *info = pci_get_drvdata(dev);
struct arkfb_info *par = info->par;

- dev_info(info->dev, "resume\n");
+ dev_info(info->device, "resume\n");

acquire_console_sem();
mutex_lock(&(par->open_lock));
diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff linux-2.6.26-orig/drivers/video/s3fb.c linux-2.6.26/drivers/video/s3fb.c
--- linux-2.6.26-orig/drivers/video/s3fb.c 2008-07-13 23:51:29.000000000 +0200
+++ linux-2.6.26/drivers/video/s3fb.c 2008-07-16 22:44:19.000000000 +0200
@@ -903,13 +903,13 @@ static int __devinit s3_pci_probe(struct
/* Prepare PCI device */
rc = pci_enable_device(dev);
if (rc < 0) {
- dev_err(info->dev, "cannot enable PCI device\n");
+ dev_err(info->device, "cannot enable PCI device\n");
goto err_enable_device;
}

rc = pci_request_regions(dev, "s3fb");
if (rc < 0) {
- dev_err(info->dev, "cannot reserve framebuffer region\n");
+ dev_err(info->device, "cannot reserve framebuffer region\n");
goto err_request_regions;
}

@@ -921,7 +921,7 @@ static int __devinit s3_pci_probe(struct
info->screen_base = pci_iomap(dev, 0, 0);
if (! info->screen_base) {
rc = -ENOMEM;
- dev_err(info->dev, "iomap for framebuffer failed\n");
+ dev_err(info->device, "iomap for framebuffer failed\n");
goto err_iomap;
}

@@ -965,19 +965,19 @@ static int __devinit s3_pci_probe(struct
rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
if (! ((rc == 1) || (rc == 2))) {
rc = -EINVAL;
- dev_err(info->dev, "mode %s not found\n", mode_option);
+ dev_err(info->device, "mode %s not found\n", mode_option);
goto err_find_mode;
}

rc = fb_alloc_cmap(&info->cmap, 256, 0);
if (rc < 0) {
- dev_err(info->dev, "cannot allocate colormap\n");
+ dev_err(info->device, "cannot allocate colormap\n");
goto err_alloc_cmap;
}

rc = register_framebuffer(info);
if (rc < 0) {
- dev_err(info->dev, "cannot register framebuffer\n");
+ dev_err(info->device, "cannot register framebuffer\n");
goto err_reg_fb;
}

@@ -1053,7 +1053,7 @@ static int s3_pci_suspend(struct pci_dev
struct fb_info *info = pci_get_drvdata(dev);
struct s3fb_info *par = info->par;

- dev_info(info->dev, "suspend\n");
+ dev_info(info->device, "suspend\n");

acquire_console_sem();
mutex_lock(&(par->open_lock));
@@ -1085,7 +1085,7 @@ static int s3_pci_resume(struct pci_dev*
struct s3fb_info *par = info->par;
int err;

- dev_info(info->dev, "resume\n");
+ dev_info(info->device, "resume\n");

acquire_console_sem();
mutex_lock(&(par->open_lock));
@@ -1102,7 +1102,7 @@ static int s3_pci_resume(struct pci_dev*
if (err) {
mutex_unlock(&(par->open_lock));
release_console_sem();
- dev_err(info->dev, "error %d enabling device for resume\n", err);
+ dev_err(info->device, "error %d enabling device for resume\n", err);
return err;
}
pci_set_master(dev);
diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff linux-2.6.26-orig/drivers/video/vt8623fb.c linux-2.6.26/drivers/video/vt8623fb.c
--- linux-2.6.26-orig/drivers/video/vt8623fb.c 2008-07-13 23:51:29.000000000 +0200
+++ linux-2.6.26/drivers/video/vt8623fb.c 2008-07-16 22:57:05.000000000 +0200
@@ -677,13 +677,13 @@ static int __devinit vt8623_pci_probe(st

rc = pci_enable_device(dev);
if (rc < 0) {
- dev_err(info->dev, "cannot enable PCI device\n");
+ dev_err(info->device, "cannot enable PCI device\n");
goto err_enable_device;
}

rc = pci_request_regions(dev, "vt8623fb");
if (rc < 0) {
- dev_err(info->dev, "cannot reserve framebuffer region\n");
+ dev_err(info->device, "cannot reserve framebuffer region\n");
goto err_request_regions;
}

@@ -696,14 +696,14 @@ static int __devinit vt8623_pci_probe(st
info->screen_base = pci_iomap(dev, 0, 0);
if (! info->screen_base) {
rc = -ENOMEM;
- dev_err(info->dev, "iomap for framebuffer failed\n");
+ dev_err(info->device, "iomap for framebuffer failed\n");
goto err_iomap_1;
}

par->mmio_base = pci_iomap(dev, 1, 0);
if (! par->mmio_base) {
rc = -ENOMEM;
- dev_err(info->dev, "iomap for MMIO failed\n");
+ dev_err(info->device, "iomap for MMIO failed\n");
goto err_iomap_2;
}

@@ -714,7 +714,7 @@ static int __devinit vt8623_pci_probe(st
if ((16 <= memsize1) && (memsize1 <= 64) && (memsize1 == memsize2))
info->screen_size = memsize1 << 20;
else {
- dev_err(info->dev, "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
+ dev_err(info->device, "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
info->screen_size = 16 << 20;
}

@@ -731,19 +731,19 @@ static int __devinit vt8623_pci_probe(st
rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
if (! ((rc == 1) || (rc == 2))) {
rc = -EINVAL;
- dev_err(info->dev, "mode %s not found\n", mode_option);
+ dev_err(info->device, "mode %s not found\n", mode_option);
goto err_find_mode;
}

rc = fb_alloc_cmap(&info->cmap, 256, 0);
if (rc < 0) {
- dev_err(info->dev, "cannot allocate colormap\n");
+ dev_err(info->device, "cannot allocate colormap\n");
goto err_alloc_cmap;
}

rc = register_framebuffer(info);
if (rc < 0) {
- dev_err(info->dev, "cannot register framebugger\n");
+ dev_err(info->device, "cannot register framebugger\n");
goto err_reg_fb;
}

@@ -817,7 +817,7 @@ static int vt8623_pci_suspend(struct pci
struct fb_info *info = pci_get_drvdata(dev);
struct vt8623fb_info *par = info->par;

- dev_info(info->dev, "suspend\n");
+ dev_info(info->device, "suspend\n");

acquire_console_sem();
mutex_lock(&(par->open_lock));
@@ -848,7 +848,7 @@ static int vt8623_pci_resume(struct pci_
struct fb_info *info = pci_get_drvdata(dev);
struct vt8623fb_info *par = info->par;

- dev_info(info->dev, "resume\n");
+ dev_info(info->device, "resume\n");

acquire_console_sem();
mutex_lock(&(par->open_lock));




--
Elen sila lumenn' omentielvo

Ondrej 'SanTiago' Zajicek (email: [email protected])
OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net)
"To err is human -- to blame it on a computer is even more so."

2008-07-17 11:23:58

by [email protected]

[permalink] [raw]
Subject: Re: kernel oops with framebuffer device vt8623fb

Hi!

this patch fixed my problem completly.

thanks a lot!

kind regards, Alois

Ondrej Zajicek wrote:
> On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
>
>> Hi!
>>
>> I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found
>> a problem.
>>
>> If I load the module vt8623fb i get a kernel oops, if the VIA 8623
>> display framebuffer driver is compiled direct into kernel the system
>> hangs up very early at booting the kernel.
>>
>
> I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
>
> Signed-off-by: Ondrej Zajicek <[email protected]>
>
> diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff linux-2.6.26-orig/drivers/video/arkfb.c linux-2.6.26/drivers/video/arkfb.c
> --- linux-2.6.26-orig/drivers/video/arkfb.c 2008-07-13 23:51:29.000000000 +0200
> +++ linux-2.6.26/drivers/video/arkfb.c 2008-07-16 22:56:34.000000000 +0200
> @@ -958,20 +958,20 @@ static int __devinit ark_pci_probe(struc
> /* Prepare PCI device */
> rc = pci_enable_device(dev);
> if (rc < 0) {
> - dev_err(info->dev, "cannot enable PCI device\n");
> + dev_err(info->device, "cannot enable PCI device\n");
> goto err_enable_device;
> }
>
> rc = pci_request_regions(dev, "arkfb");
> if (rc < 0) {
> - dev_err(info->dev, "cannot reserve framebuffer region\n");
> + dev_err(info->device, "cannot reserve framebuffer region\n");
> goto err_request_regions;
> }
>
> par->dac = ics5342_init(ark_dac_read_regs, ark_dac_write_regs, info);
> if (! par->dac) {
> rc = -ENOMEM;
> - dev_err(info->dev, "RAMDAC initialization failed\n");
> + dev_err(info->device, "RAMDAC initialization failed\n");
> goto err_dac;
> }
>
> @@ -982,7 +982,7 @@ static int __devinit ark_pci_probe(struc
> info->screen_base = pci_iomap(dev, 0, 0);
> if (! info->screen_base) {
> rc = -ENOMEM;
> - dev_err(info->dev, "iomap for framebuffer failed\n");
> + dev_err(info->device, "iomap for framebuffer failed\n");
> goto err_iomap;
> }
>
> @@ -1004,19 +1004,19 @@ static int __devinit ark_pci_probe(struc
> rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
> if (! ((rc == 1) || (rc == 2))) {
> rc = -EINVAL;
> - dev_err(info->dev, "mode %s not found\n", mode_option);
> + dev_err(info->device, "mode %s not found\n", mode_option);
> goto err_find_mode;
> }
>
> rc = fb_alloc_cmap(&info->cmap, 256, 0);
> if (rc < 0) {
> - dev_err(info->dev, "cannot allocate colormap\n");
> + dev_err(info->device, "cannot allocate colormap\n");
> goto err_alloc_cmap;
> }
>
> rc = register_framebuffer(info);
> if (rc < 0) {
> - dev_err(info->dev, "cannot register framebugger\n");
> + dev_err(info->device, "cannot register framebugger\n");
> goto err_reg_fb;
> }
>
> @@ -1090,7 +1090,7 @@ static int ark_pci_suspend (struct pci_d
> struct fb_info *info = pci_get_drvdata(dev);
> struct arkfb_info *par = info->par;
>
> - dev_info(info->dev, "suspend\n");
> + dev_info(info->device, "suspend\n");
>
> acquire_console_sem();
> mutex_lock(&(par->open_lock));
> @@ -1121,7 +1121,7 @@ static int ark_pci_resume (struct pci_de
> struct fb_info *info = pci_get_drvdata(dev);
> struct arkfb_info *par = info->par;
>
> - dev_info(info->dev, "resume\n");
> + dev_info(info->device, "resume\n");
>
> acquire_console_sem();
> mutex_lock(&(par->open_lock));
> diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff linux-2.6.26-orig/drivers/video/s3fb.c linux-2.6.26/drivers/video/s3fb.c
> --- linux-2.6.26-orig/drivers/video/s3fb.c 2008-07-13 23:51:29.000000000 +0200
> +++ linux-2.6.26/drivers/video/s3fb.c 2008-07-16 22:44:19.000000000 +0200
> @@ -903,13 +903,13 @@ static int __devinit s3_pci_probe(struct
> /* Prepare PCI device */
> rc = pci_enable_device(dev);
> if (rc < 0) {
> - dev_err(info->dev, "cannot enable PCI device\n");
> + dev_err(info->device, "cannot enable PCI device\n");
> goto err_enable_device;
> }
>
> rc = pci_request_regions(dev, "s3fb");
> if (rc < 0) {
> - dev_err(info->dev, "cannot reserve framebuffer region\n");
> + dev_err(info->device, "cannot reserve framebuffer region\n");
> goto err_request_regions;
> }
>
> @@ -921,7 +921,7 @@ static int __devinit s3_pci_probe(struct
> info->screen_base = pci_iomap(dev, 0, 0);
> if (! info->screen_base) {
> rc = -ENOMEM;
> - dev_err(info->dev, "iomap for framebuffer failed\n");
> + dev_err(info->device, "iomap for framebuffer failed\n");
> goto err_iomap;
> }
>
> @@ -965,19 +965,19 @@ static int __devinit s3_pci_probe(struct
> rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
> if (! ((rc == 1) || (rc == 2))) {
> rc = -EINVAL;
> - dev_err(info->dev, "mode %s not found\n", mode_option);
> + dev_err(info->device, "mode %s not found\n", mode_option);
> goto err_find_mode;
> }
>
> rc = fb_alloc_cmap(&info->cmap, 256, 0);
> if (rc < 0) {
> - dev_err(info->dev, "cannot allocate colormap\n");
> + dev_err(info->device, "cannot allocate colormap\n");
> goto err_alloc_cmap;
> }
>
> rc = register_framebuffer(info);
> if (rc < 0) {
> - dev_err(info->dev, "cannot register framebuffer\n");
> + dev_err(info->device, "cannot register framebuffer\n");
> goto err_reg_fb;
> }
>
> @@ -1053,7 +1053,7 @@ static int s3_pci_suspend(struct pci_dev
> struct fb_info *info = pci_get_drvdata(dev);
> struct s3fb_info *par = info->par;
>
> - dev_info(info->dev, "suspend\n");
> + dev_info(info->device, "suspend\n");
>
> acquire_console_sem();
> mutex_lock(&(par->open_lock));
> @@ -1085,7 +1085,7 @@ static int s3_pci_resume(struct pci_dev*
> struct s3fb_info *par = info->par;
> int err;
>
> - dev_info(info->dev, "resume\n");
> + dev_info(info->device, "resume\n");
>
> acquire_console_sem();
> mutex_lock(&(par->open_lock));
> @@ -1102,7 +1102,7 @@ static int s3_pci_resume(struct pci_dev*
> if (err) {
> mutex_unlock(&(par->open_lock));
> release_console_sem();
> - dev_err(info->dev, "error %d enabling device for resume\n", err);
> + dev_err(info->device, "error %d enabling device for resume\n", err);
> return err;
> }
> pci_set_master(dev);
> diff -uprN -X linux-2.6.26-orig/Documentation/dontdiff linux-2.6.26-orig/drivers/video/vt8623fb.c linux-2.6.26/drivers/video/vt8623fb.c
> --- linux-2.6.26-orig/drivers/video/vt8623fb.c 2008-07-13 23:51:29.000000000 +0200
> +++ linux-2.6.26/drivers/video/vt8623fb.c 2008-07-16 22:57:05.000000000 +0200
> @@ -677,13 +677,13 @@ static int __devinit vt8623_pci_probe(st
>
> rc = pci_enable_device(dev);
> if (rc < 0) {
> - dev_err(info->dev, "cannot enable PCI device\n");
> + dev_err(info->device, "cannot enable PCI device\n");
> goto err_enable_device;
> }
>
> rc = pci_request_regions(dev, "vt8623fb");
> if (rc < 0) {
> - dev_err(info->dev, "cannot reserve framebuffer region\n");
> + dev_err(info->device, "cannot reserve framebuffer region\n");
> goto err_request_regions;
> }
>
> @@ -696,14 +696,14 @@ static int __devinit vt8623_pci_probe(st
> info->screen_base = pci_iomap(dev, 0, 0);
> if (! info->screen_base) {
> rc = -ENOMEM;
> - dev_err(info->dev, "iomap for framebuffer failed\n");
> + dev_err(info->device, "iomap for framebuffer failed\n");
> goto err_iomap_1;
> }
>
> par->mmio_base = pci_iomap(dev, 1, 0);
> if (! par->mmio_base) {
> rc = -ENOMEM;
> - dev_err(info->dev, "iomap for MMIO failed\n");
> + dev_err(info->device, "iomap for MMIO failed\n");
> goto err_iomap_2;
> }
>
> @@ -714,7 +714,7 @@ static int __devinit vt8623_pci_probe(st
> if ((16 <= memsize1) && (memsize1 <= 64) && (memsize1 == memsize2))
> info->screen_size = memsize1 << 20;
> else {
> - dev_err(info->dev, "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
> + dev_err(info->device, "memory size detection failed (%x %x), suppose 16 MB\n", memsize1, memsize2);
> info->screen_size = 16 << 20;
> }
>
> @@ -731,19 +731,19 @@ static int __devinit vt8623_pci_probe(st
> rc = fb_find_mode(&(info->var), info, mode_option, NULL, 0, NULL, 8);
> if (! ((rc == 1) || (rc == 2))) {
> rc = -EINVAL;
> - dev_err(info->dev, "mode %s not found\n", mode_option);
> + dev_err(info->device, "mode %s not found\n", mode_option);
> goto err_find_mode;
> }
>
> rc = fb_alloc_cmap(&info->cmap, 256, 0);
> if (rc < 0) {
> - dev_err(info->dev, "cannot allocate colormap\n");
> + dev_err(info->device, "cannot allocate colormap\n");
> goto err_alloc_cmap;
> }
>
> rc = register_framebuffer(info);
> if (rc < 0) {
> - dev_err(info->dev, "cannot register framebugger\n");
> + dev_err(info->device, "cannot register framebugger\n");
> goto err_reg_fb;
> }
>
> @@ -817,7 +817,7 @@ static int vt8623_pci_suspend(struct pci
> struct fb_info *info = pci_get_drvdata(dev);
> struct vt8623fb_info *par = info->par;
>
> - dev_info(info->dev, "suspend\n");
> + dev_info(info->device, "suspend\n");
>
> acquire_console_sem();
> mutex_lock(&(par->open_lock));
> @@ -848,7 +848,7 @@ static int vt8623_pci_resume(struct pci_
> struct fb_info *info = pci_get_drvdata(dev);
> struct vt8623fb_info *par = info->par;
>
> - dev_info(info->dev, "resume\n");
> + dev_info(info->device, "resume\n");
>
> acquire_console_sem();
> mutex_lock(&(par->open_lock));
>
>
>
>
>

2008-07-29 03:49:16

by Andrew Morton

[permalink] [raw]
Subject: Re: kernel oops with framebuffer device vt8623fb

On Thu, 17 Jul 2008 03:39:18 +0200 Ondrej Zajicek <[email protected]> wrote:

> On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
> > Hi!
> >
> > I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found
> > a problem.
> >
> > If I load the module vt8623fb i get a kernel oops, if the VIA 8623
> > display framebuffer driver is compiled direct into kernel the system
> > hangs up very early at booting the kernel.
>
> I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
>
> Signed-off-by: Ondrej Zajicek <[email protected]>

I went back through the email thread and wrote your changelog for you.
Not a very good one though.

It would be better were you to write your changelogs, please.

2008-08-05 11:19:41

by [email protected]

[permalink] [raw]
Subject: Re: kernel oops with framebuffer device vt8623fb

Hi!

This issue is still not fixed in 2.6.26.1 - may be there a way to commit
it in 2.6.26.2?

Still, the provided patch I got on 07/17/2008 works great ...

Thanks, anyway!

kind regards, Alois


Andrew Morton wrote:
> On Thu, 17 Jul 2008 03:39:18 +0200 Ondrej Zajicek <[email protected]> wrote:
>
>
>> On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
>>
>>> Hi!
>>>
>>> I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found
>>> a problem.
>>>
>>> If I load the module vt8623fb i get a kernel oops, if the VIA 8623
>>> display framebuffer driver is compiled direct into kernel the system
>>> hangs up very early at booting the kernel.
>>>
>> I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
>>
>> Signed-off-by: Ondrej Zajicek <[email protected]>
>>
>
> I went back through the email thread and wrote your changelog for you.
> Not a very good one though.
>
> It would be better were you to write your changelogs, please.
>
>
>

2008-08-05 16:13:10

by Andrew Morton

[permalink] [raw]
Subject: Re: kernel oops with framebuffer device vt8623fb

On Tue, 05 Aug 2008 13:17:39 +0200 "[email protected]" <[email protected]> wrote:

>
> Andrew Morton wrote:
> > On Thu, 17 Jul 2008 03:39:18 +0200 Ondrej Zajicek <[email protected]> wrote:
> >
> >
> >> On Wed, Jul 16, 2008 at 07:00:02PM +0200, [email protected] wrote:
> >>
> >>> Hi!
> >>>
> >>> I've updated my machine from 2.6.25.11 to 2.6.26 and I think I've found
> >>> a problem.
> >>>
> >>> If I load the module vt8623fb i get a kernel oops, if the VIA 8623
> >>> display framebuffer driver is compiled direct into kernel the system
> >>> hangs up very early at booting the kernel.
> >>>
> >> I am sorry for mistake, here is a patch for 2.6.26 fixing the bug:
> >>
> >> Signed-off-by: Ondrej Zajicek <[email protected]>
> >>
> >
> > I went back through the email thread and wrote your changelog for you.
> > Not a very good one though.
> >
> > It would be better were you to write your changelogs, please.
> >
>
> Hi!
>
> This issue is still not fixed in 2.6.26.1 - may be there a way to commit
> it in 2.6.26.2?
>
> Still, the provided patch I got on 07/17/2008 works great ...
>
> Thanks, anyway!
>
> kind regards, Alois
>

(top-posting repaired)

The fix will be in my next batch for Linus. It'll be merged this week.