2008-10-10 07:21:22

by Timothy Shimmin

[permalink] [raw]
Subject: [PATCH] fix barrier fail detection in XFS

Hi Linus,

Please include the following patch.

This is an important fix posted by Christoph Hellwig today.
Without this fix, XFS can turn off barriers when we wrap our ondisk log.
Which could lead to corruption after unclean unmounts/shutdowns
on machines without a persistent write cache etc.

--Tim

---------------
Fix barrier fail detection in XFS

Currently we disable barriers as soon as we get a buffer in xlog_iodone
that has the XBF_ORDERED flag cleared. But this can be the case not only
for buffers where the barrier failed, but also the first buffer of a
split log write in case of a log wraparound. Due to the disabled
barriers we can easily get directory corruption on unclean shutdowns.
So instead of using this check add a new buffer flag for failed barrier
writes.

This is a regression vs 2.6.26 caused by patch to use the right macro
to check for the ORDERED flag, as we previously got true returned for
every buffer.

Thanks to Toei Rei for reporting the bug.


Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Eric Sandeen <[email protected]>
Reviewed-by: David Chinner <[email protected]>
Signed-off-by: Tim Shimmin <[email protected]>

Index: 2.6.x-xfs-quilt/fs/xfs/linux-2.6/xfs_buf.c
===================================================================
--- 2.6.x-xfs-quilt.orig/fs/xfs/linux-2.6/xfs_buf.c 2008-09-19 13:47:36.000000000 +1000
+++ 2.6.x-xfs-quilt/fs/xfs/linux-2.6/xfs_buf.c 2008-10-10 15:07:51.316145158 +1100
@@ -1001,12 +1001,13 @@ xfs_buf_iodone_work(
* We can get an EOPNOTSUPP to ordered writes. Here we clear the
* ordered flag and reissue them. Because we can't tell the higher
* layers directly that they should not issue ordered I/O anymore, they
- * need to check if the ordered flag was cleared during I/O completion.
+ * need to check if the _XFS_BARRIER_FAILED flag was set during I/O completion.
*/
if ((bp->b_error == EOPNOTSUPP) &&
(bp->b_flags & (XBF_ORDERED|XBF_ASYNC)) == (XBF_ORDERED|XBF_ASYNC)) {
XB_TRACE(bp, "ordered_retry", bp->b_iodone);
bp->b_flags &= ~XBF_ORDERED;
+ bp->b_flags |= _XFS_BARRIER_FAILED;
xfs_buf_iorequest(bp);
} else if (bp->b_iodone)
(*(bp->b_iodone))(bp);
Index: 2.6.x-xfs-quilt/fs/xfs/linux-2.6/xfs_buf.h
===================================================================
--- 2.6.x-xfs-quilt.orig/fs/xfs/linux-2.6/xfs_buf.h 2008-09-19 13:47:36.000000000 +1000
+++ 2.6.x-xfs-quilt/fs/xfs/linux-2.6/xfs_buf.h 2008-10-10 11:54:23.269373217 +1100
@@ -85,6 +85,14 @@ typedef enum {
* modifications being lost.
*/
_XBF_PAGE_LOCKED = (1 << 22),
+
+ /*
+ * If we try a barrier write, but it fails we have to communicate
+ * this to the upper layers. Unfortunately b_error gets overwritten
+ * when the buffer is re-issued so we have to add another flag to
+ * keep this information.
+ */
+ _XFS_BARRIER_FAILED = (1 << 23),
} xfs_buf_flags_t;

typedef enum {
Index: 2.6.x-xfs-quilt/fs/xfs/xfs_log.c
===================================================================
--- 2.6.x-xfs-quilt.orig/fs/xfs/xfs_log.c 2008-09-22 11:54:19.000000000 +1000
+++ 2.6.x-xfs-quilt/fs/xfs/xfs_log.c 2008-10-10 15:09:56.967725107 +1100
@@ -1033,11 +1033,12 @@ xlog_iodone(xfs_buf_t *bp)
l = iclog->ic_log;

/*
- * If the ordered flag has been removed by a lower
- * layer, it means the underlyin device no longer supports
+ * If the _XFS_BARRIER_FAILED flag was set by a lower
+ * layer, it means the underlying device no longer supports
* barrier I/O. Warn loudly and turn off barriers.
*/
- if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ISORDERED(bp)) {
+ if (bp->b_flags & _XFS_BARRIER_FAILED) {
+ bp->b_flags &= ~_XFS_BARRIER_FAILED;
l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER;
xfs_fs_cmn_err(CE_WARN, l->l_mp,
"xlog_iodone: Barriers are no longer supported"