Hiall. Just got these strange messages with 2.6.27.2. They flood dmesg.. (same block every second).
[42016.520062] ACPI: EC: acpi_ec_wait timeout, status = 0x1a, event = "b1=0"
[42016.520079] ACPI: EC: input buffer is not empty, aborting transaction
[42017.025050] ACPI: EC: acpi_ec_wait timeout, status = 0x1a, event = "b1=0"
[42017.025197] ACPI: EC: input buffer is not empty, aborting transaction
[42017.025254] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[42017.025350] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1.UPBS] (Node f78353b0), AE_TIME
[42017.025546] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._BST] (Node f7835400), AE_TIME
[42017.025715] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609]
Battery state "freezes" after this.. So if it was charged to 90%, it will
be 90% forever. Also information about charger (plugged/unplugged) is not
updating... BIOS automatically increases display brightness just after
plugging charger but powersave thinks that it's unplugged.
After turning laptop off I can't turn it on any more.. I can hear fan noise,
but it don't boots (There are no even BIOS splash/message)
I should remove battery and wait ~5 seconds...
v2.6.26 was non-working here, but as far as I remember, there was no such
problem with 2.6.25. It's very difficult to reproduce it (this is just
second case for ~2-3 weeks). So bisecting is impossible.
Any ideas? Should I fill a bugreport?
dmesg when this happens is available:
http://inhex.net/dion/lkml/dmesg_2.6.27.txt
--
WBR, Dmitry
[Adding CCs]
On Wednesday, 22 of October 2008, Dmitry Nezhevenko wrote:
> Hiall. Just got these strange messages with 2.6.27.2. They flood dmesg.. (same block every second).
>
> [42016.520062] ACPI: EC: acpi_ec_wait timeout, status = 0x1a, event = "b1=0"
> [42016.520079] ACPI: EC: input buffer is not empty, aborting transaction
> [42017.025050] ACPI: EC: acpi_ec_wait timeout, status = 0x1a, event = "b1=0"
> [42017.025197] ACPI: EC: input buffer is not empty, aborting transaction
> [42017.025254] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
> [42017.025350] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1.UPBS] (Node f78353b0), AE_TIME
> [42017.025546] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._BST] (Node f7835400), AE_TIME
> [42017.025715] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609]
>
> Battery state "freezes" after this.. So if it was charged to 90%, it will
> be 90% forever. Also information about charger (plugged/unplugged) is not
> updating... BIOS automatically increases display brightness just after
> plugging charger but powersave thinks that it's unplugged.
>
> After turning laptop off I can't turn it on any more.. I can hear fan noise,
> but it don't boots (There are no even BIOS splash/message)
>
> I should remove battery and wait ~5 seconds...
>
> v2.6.26 was non-working here, but as far as I remember, there was no such
> problem with 2.6.25. It's very difficult to reproduce it (this is just
> second case for ~2-3 weeks). So bisecting is impossible.
>
> Any ideas? Should I fill a bugreport?
>
> dmesg when this happens is available:
> http://inhex.net/dion/lkml/dmesg_2.6.27.txt
>
Rafael J. Wysocki wrote:
> [Adding CCs]
>
> On Wednesday, 22 of October 2008, Dmitry Nezhevenko wrote:
>> Hiall. Just got these strange messages with 2.6.27.2. They flood dmesg.. (same block every second).
>>
>> [42016.520062] ACPI: EC: acpi_ec_wait timeout, status = 0x1a, event = "b1=0"
>> [42016.520079] ACPI: EC: input buffer is not empty, aborting transaction
>> [42017.025050] ACPI: EC: acpi_ec_wait timeout, status = 0x1a, event = "b1=0"
>> [42017.025197] ACPI: EC: input buffer is not empty, aborting transaction
>> [42017.025254] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
>> [42017.025350] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1.UPBS] (Node f78353b0), AE_TIME
>> [42017.025546] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._BST] (Node f7835400), AE_TIME
>> [42017.025715] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609]
>>
>> Battery state "freezes" after this.. So if it was charged to 90%, it will
>> be 90% forever. Also information about charger (plugged/unplugged) is not
>> updating... BIOS automatically increases display brightness just after
>> plugging charger but powersave thinks that it's unplugged.
>>
>> After turning laptop off I can't turn it on any more.. I can hear fan noise,
>> but it don't boots (There are no even BIOS splash/message)
>>
>> I should remove battery and wait ~5 seconds...
>>
>> v2.6.26 was non-working here, but as far as I remember, there was no such
>> problem with 2.6.25. It's very difficult to reproduce it (this is just
>> second case for ~2-3 weeks). So bisecting is impossible.
>>
>> Any ideas? Should I fill a bugreport?
Please try changing msleep(1) to udelay(50) in drivers/acpi/ec.c
Do you have msi-laptop module loaded?
Please fill a bugreport and attach all the information there.
Thanks,
Alex.
On Wed, Oct 22, 2008 at 11:29:54AM +0400, Alexey Starikovskiy wrote:
> Please try changing msleep(1) to udelay(50) in drivers/acpi/ec.c
Ok. Will try this. However as I said issue is not easy to reproduce.. So
I'll just change it and wait a bit.
> have msi-laptop module loaded?
No. I don't use it.
> Please fill a bugreport and attach all the information there.
Ok. Will do this soon
--
WBR, Dmitry