LinuxLists.cc - Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x

2008-12-18 11:32:41

Subject: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x

Hello all.
After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
SATA controller in AHCI mode.
Platform is Intel SR1530HSH

Config attached.

Any patches for test? Any ideas? Any other info needed? Or i must go to
bugtracker? ;)

# lspci
00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
(rev 02)
02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e
[Pilot] ServerEngines (SEP1) (rev 02)
03:02.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
Controller (rev 05)

Thanks!

Attachments:

inte_conf.gz (9.59 kB)

2008-12-20 06:33:09

by Andrew Morton

[permalink] [raw]

Subject: Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x

(cc linux-ide)

On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <[email protected]> wrote:

> Hello all.
> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
> SATA controller in AHCI mode.
> Platform is Intel SR1530HSH
>
> Config attached.
>
> Any patches for test? Any ideas? Any other info needed? Or i must go to
> bugtracker? ;)
>
> # lspci
> 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller
> 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
> Connection (rev 02)
> 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #4 (rev 02)
> 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #5 (rev 02)
> 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
> Controller #2 (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 1 (rev 02)
> 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 5 (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #3 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
> Controller #1 (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
> 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
> Controller (rev 02)
> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
> port SATA AHCI Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
> (rev 02)
> 02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e
> [Pilot] ServerEngines (SEP1) (rev 02)
> 03:02.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
> Controller (rev 05)
>
> Thanks!
>

2008-12-22 02:21:43

by Tejun Heo

[permalink] [raw]

Subject: Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x

Andrew Morton wrote:
> (cc linux-ide)
>
> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <[email protected]> wrote:
>
>> Hello all.
>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>> SATA controller in AHCI mode.
>> Platform is Intel SR1530HSH
>>
>> Config attached.
>>
>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>> bugtracker? ;)

Does ahci.ahci_em_messages=0 help?

--
tejun

2008-12-22 07:11:13

by Badalian Vyacheslav

[permalink] [raw]

Subject: Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x

Tejun Heo пишет:
> Andrew Morton wrote:
>
>> (cc linux-ide)
>>
>> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <[email protected]> wrote:
>>
>>
>>> Hello all.
>>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>>> SATA controller in AHCI mode.
>>> Platform is Intel SR1530HSH
>>>
>>> Config attached.
>>>
>>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>>> bugtracker? ;)
>>>
>
> Does ahci.ahci_em_messages=0 help?
>
>
Hello!

echo 0 > /sys/module/ahci/parameters/ahci_em_messages
-bash: /sys/module/ahci/parameters/ahci_em_messages: Permission denied
ls -la /sys/module/ahci/parameters/ahci_em_messages
-r--r--r-- 1 root root 4096 Dec 22 10:04
/sys/module/ahci/parameters/ahci_em_messages

Any other chance to change without it reboot? Or i can change it only at
boot? I will reboot server at night.

Vyacheslav

2008-12-22 07:15:45

by Tejun Heo

[permalink] [raw]

Subject: Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x

Badalian Vyacheslav wrote:
> echo 0 > /sys/module/ahci/parameters/ahci_em_messages
> -bash: /sys/module/ahci/parameters/ahci_em_messages: Permission denied
> ls -la /sys/module/ahci/parameters/ahci_em_messages
> -r--r--r-- 1 root root 4096 Dec 22 10:04
> /sys/module/ahci/parameters/ahci_em_messages
>
> Any other chance to change without it reboot? Or i can change it only at
> boot? I will reboot server at night.

You can unload and reload ahci but that often isn't too different
from rebooting.

--
tejun

2008-12-23 06:32:41

by Badalian Vyacheslav

[permalink] [raw]

Subject: Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x

2008-12-25 06:35:05

by Badalian Vyacheslav

[permalink] [raw]

Subject: Re[retry]: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x

>> (cc linux-ide)
>>
>> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <[email protected]> wrote:
>>
>>
>>> Hello all.
>>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>>> SATA controller in AHCI mode.
>>> Platform is Intel SR1530HSH
>>>
>>> Config attached.
>>>
>>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>>> bugtracker? ;)
>>>
>
> Does ahci.ahci_em_messages=0 help?
>
>

No. All leds is turned off. No green led at bay with hard disk.