From: Hitoshi Mitake <[email protected]>
I wrote a patch for making a debugging information more verbose
for use in development debugging.
If this patch applied and enabled new option "More verbose debugging",
information about source file and line number will be added to debugging message.
This is sample output,
EDAC MC0: Giving out device to 'e7xxx_edac' 'E7205': DEV 0000:00:00.0
EDAC DEBUG: in drivers/edac/edac_pci.c, line at 48: edac_pci_alloc_ctl_info()
EDAC DEBUG: in drivers/edac/edac_pci.c, line at 334: edac_pci_add_device()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I think this patch is comfortable for EDAC developers.
This is patch, please use.
Signed-off-by: Hitoshi Mitake <[email protected]>
Signed-off-by: Doug Thompson <[email protected]>
---
Kconfig | 8 ++++++++
edac_core.h | 15 ++++++++++++++-
2 files changed, 22 insertions(+), 1 deletion(-)
Index: linux-2.6.28/drivers/edac/Kconfig
===================================================================
--- linux-2.6.28.orig/drivers/edac/Kconfig
+++ linux-2.6.28/drivers/edac/Kconfig
@@ -40,6 +40,14 @@ config EDAC_DEBUG
there're four debug levels (x=0,1,2,3 from low to high).
Usually you should select 'N'.
+config EDAC_DEBUG_VERBOSE
+ bool "More verbose debugging"
+ depends on EDAC_DEBUG
+ help
+ This option makes debugging information more verbose.
+ Source file name and line number where debugging message
+ printed will be added to debugging message.
+
config EDAC_MM_EDAC
tristate "Main Memory EDAC (Error Detection And Correction) reporting"
default y
Index: linux-2.6.28/drivers/edac/edac_core.h
===================================================================
--- linux-2.6.28.orig/drivers/edac/edac_core.h
+++ linux-2.6.28/drivers/edac/edac_core.h
@@ -49,6 +49,10 @@
#define edac_printk(level, prefix, fmt, arg...) \
printk(level "EDAC " prefix ": " fmt, ##arg)
+#define edac_printk_verbose(level, prefix, fmt, arg...) \
+ printk(level "EDAC " prefix ": " "in %s, line at %d: " fmt, \
+ __FILE__, __LINE__, ##arg)
+
#define edac_mc_printk(mci, level, fmt, arg...) \
printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg)
@@ -71,11 +75,20 @@
#ifdef CONFIG_EDAC_DEBUG
extern int edac_debug_level;
+#ifndef CONFIG_EDAC_DEBUG_VERBOSE
#define edac_debug_printk(level, fmt, arg...) \
do { \
if (level <= edac_debug_level) \
edac_printk(KERN_DEBUG, EDAC_DEBUG, fmt, ##arg); \
- } while(0)
+ } while (0)
+#else /* CONFIG_EDAC_DEBUG_VERBOSE */
+#define edac_debug_printk(level, fmt, arg...) \
+ do { \
+ if (level <= edac_debug_level) \
+ edac_printk_verbose(KERN_DEBUG, EDAC_DEBUG, fmt, \
+ ##arg); \
+ } while (0)
+#endif
#define debugf0( ... ) edac_debug_printk(0, __VA_ARGS__ )
#define debugf1( ... ) edac_debug_printk(1, __VA_ARGS__ )