diff -up -X linux-2.6/Documentation/dontdiff linux-2.6/drivers/staging/slicoss/README a/drivers/staging/slicoss/README
--- linux-2.6/drivers/staging/slicoss/README 2008-10-22 12:02:14.032883020 +0200
+++ a/drivers/staging/slicoss/README 2008-11-04 12:20:07.618138129 +0200
@@ -14,6 +14,5 @@ TODO:
Please send patches to:
Greg Kroah-Hartman <[email protected]>
-and Cc: Lior Dotan <[email protected]> and Christopher Harrer
-<[email protected]> as well as they are also able to test out any
-changes.
+and Cc: Christopher Harrer <[email protected]> as well as he is also able
+to test out any changes.
diff -up -X linux-2.6/Documentation/dontdiff linux-2.6/drivers/staging/slicoss/slic.h a/drivers/staging/slicoss/slic.h
--- linux-2.6/drivers/staging/slicoss/slic.h 2008-10-22 12:02:14.302860489 +0200
+++ a/drivers/staging/slicoss/slic.h 2008-12-21 14:59:11.485922582 +0200
@@ -41,6 +41,20 @@
#ifndef __SLIC_DRIVER_H__
#define __SLIC_DRIVER_H__
+/* firmware stuff */
+#define OASIS_UCODE_VERS_STRING "1.2"
+#define OASIS_UCODE_VERS_DATE "2006/03/27 15:10:37"
+#define OASIS_UCODE_HOSTIF_ID 3
+
+#define MOJAVE_UCODE_VERS_STRING "1.2"
+#define MOJAVE_UCODE_VERS_DATE "2006/03/27 15:12:22"
+#define MOJAVE_UCODE_HOSTIF_ID 3
+
+#define GB_RCVUCODE_VERS_STRING "1.2"
+#define GB_RCVUCODE_VERS_DATE "2006/03/27 15:12:15"
+static u32 OasisRcvUCodeLen = 512;
+static u32 GBRcvUCodeLen = 512;
+#define SECTION_SIZE 65536
struct slic_spinlock {
spinlock_t lock;
diff -up -X linux-2.6/Documentation/dontdiff linux-2.6/drivers/staging/slicoss/slicoss.c a/drivers/staging/slicoss/slicoss.c
--- linux-2.6/drivers/staging/slicoss/slicoss.c 2008-10-24 14:44:51.792327028 +0200
+++ a/drivers/staging/slicoss/slicoss.c 2008-12-21 14:59:11.645973162 +0200
@@ -94,6 +94,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/firmware.h>
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/mii.h>
@@ -105,15 +106,6 @@
#include <linux/uaccess.h>
#include "slicinc.h"
-#include "gbdownload.h"
-#include "gbrcvucode.h"
-#include "oasisrcvucode.h"
-
-#ifdef DEBUG_MICROCODE
-#include "oasisdbgdownload.h"
-#else
-#include "oasisdownload.h"
-#endif
#if SLIC_DUMP_ENABLED
#include "slicdump.h"
@@ -323,7 +315,7 @@ static void slic_init_adapter(struct net
index, pslic_handle, adapter->pfree_slic_handles, pslic_handle->next);*/
adapter->pshmem = (struct slic_shmem *)
pci_alloc_consistent(adapter->pcidev,
- sizeof(struct slic_shmem *),
+ sizeof(struct slic_shmem),
&adapter->
phys_shmem);
/*
@@ -365,7 +357,7 @@ static int __devinit slic_entry_probe(st
if (slic_debug > 0 && did_version++ == 0) {
printk(slic_banner);
- printk(slic_proc_version);
+ printk("%s\n", slic_proc_version);
}
err = pci_set_dma_mask(pcidev, DMA_64BIT_MASK);
@@ -1432,7 +1424,7 @@ static void slic_init_cleanup(struct ada
DBG_MSG("adapter[%p] port %d pshmem[%p] FreeShmem ",
adapter, adapter->port, (void *) adapter->pshmem);
pci_free_consistent(adapter->pcidev,
- sizeof(struct slic_shmem *),
+ sizeof(struct slic_shmem),
adapter->pshmem, adapter->phys_shmem);
adapter->pshmem = NULL;
adapter->phys_shmem = (dma_addr_t) NULL;
@@ -2187,66 +2179,91 @@ static void slic_card_cleanup(struct sli
static int slic_card_download_gbrcv(struct adapter *adapter)
{
+ const struct firmware *fw;
+ const char *file = "";
+ int ret;
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
u32 codeaddr;
- unsigned char *instruction = NULL;
+ u32 instruction;
+ int index = 0;
u32 rcvucodelen = 0;
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
- instruction = (unsigned char *)&OasisRcvUCode[0];
- rcvucodelen = OasisRcvUCodeLen;
+ file = "oasisrcvucode.sys";
break;
case SLIC_1GB_DEVICE_ID:
- instruction = (unsigned char *)&GBRcvUCode[0];
- rcvucodelen = GBRcvUCodeLen;
+ file = "gbrcvucode.sys";
break;
default:
ASSERT(0);
break;
}
+ ret = request_firmware(&fw, file, &adapter->pcidev->dev);
+ if (ret) {
+ printk(KERN_ERR "SLICOSS: Failed to load firmware %s\n", file);
+ return ret;
+ }
+
+ rcvucodelen = *(u32 *)(fw->data + index);
+ index += 4;
+ switch (adapter->devid) {
+ case SLIC_2GB_DEVICE_ID:
+ if (rcvucodelen != OasisRcvUCodeLen)
+ return -EINVAL;
+ break;
+ case SLIC_1GB_DEVICE_ID:
+ if (rcvucodelen != GBRcvUCodeLen)
+ return -EINVAL;
+ break;
+ default:
+ ASSERT(0);
+ break;
+ }
/* start download */
WRITE_REG(slic_regs->slic_rcv_wcs, SLIC_RCVWCS_BEGIN, FLUSH);
-
/* download the rcv sequencer ucode */
for (codeaddr = 0; codeaddr < rcvucodelen; codeaddr++) {
/* write out instruction address */
WRITE_REG(slic_regs->slic_rcv_wcs, codeaddr, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
/* write out the instruction data low addr */
WRITE_REG(slic_regs->slic_rcv_wcs,
- (u32) *(u32 *) instruction, FLUSH);
- instruction += 4;
+ instruction, FLUSH);
+ instruction = *(u8 *)(fw->data + index);
+ index++;
/* write out the instruction data high addr */
- WRITE_REG(slic_regs->slic_rcv_wcs, (u32) *instruction,
+ WRITE_REG(slic_regs->slic_rcv_wcs, (u8)instruction,
FLUSH);
- instruction += 1;
}
/* download finished */
+ release_firmware(fw);
WRITE_REG(slic_regs->slic_rcv_wcs, SLIC_RCVWCS_FINISH, FLUSH);
-
return 0;
}
static int slic_card_download(struct adapter *adapter)
{
+ const struct firmware *fw;
+ const char *file = "";
+ int ret;
u32 section;
int thissectionsize;
int codeaddr;
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
- u32 *instruction = NULL;
- u32 *lastinstruct = NULL;
- u32 *startinstruct = NULL;
- unsigned char *nextinstruct;
+ u32 instruction;
u32 baseaddress;
u32 failure;
u32 i;
u32 numsects = 0;
u32 sectsize[3];
u32 sectstart[3];
+ int ucode_start, index = 0;
/* DBG_MSG ("slicoss: %s (%s) adapter[%p] card[%p] devid[%x] \
jiffies[%lx] cpu %d\n", __func__, adapter->netdev->name, adapter,
@@ -2254,92 +2271,56 @@ static int slic_card_download(struct ada
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
-/* DBG_MSG ("slicoss: %s devid==SLIC_2GB_DEVICE_ID sections[%x]\n",
- __func__, (uint) ONumSections); */
- numsects = ONumSections;
- for (i = 0; i < numsects; i++) {
- sectsize[i] = OSectionSize[i];
- sectstart[i] = OSectionStart[i];
- }
+ file = "oasisdownload.sys";
break;
case SLIC_1GB_DEVICE_ID:
-/* DBG_MSG ("slicoss: %s devid==SLIC_1GB_DEVICE_ID sections[%x]\n",
- __func__, (uint) MNumSections); */
- numsects = MNumSections;
- for (i = 0; i < numsects; i++) {
- sectsize[i] = MSectionSize[i];
- sectstart[i] = MSectionStart[i];
- }
+ file = "gbdownload.sys";
break;
default:
ASSERT(0);
break;
}
-
+ ret = request_firmware(&fw, file, &adapter->pcidev->dev);
+ if (ret) {
+ printk(KERN_ERR "SLICOSS: Failed to load firmware %s\n", file);
+ return ret;
+ }
+ numsects = *(u32 *)(fw->data + index);
+ index += 4;
ASSERT(numsects <= 3);
-
+ for (i = 0; i < numsects; i++) {
+ sectsize[i] = *(u32 *)(fw->data + index);
+ index += 4;
+ }
+ for (i = 0; i < numsects; i++) {
+ sectstart[i] = *(u32 *)(fw->data + index);
+ index += 4;
+ }
+ ucode_start = index;
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
for (section = 0; section < numsects; section++) {
- switch (adapter->devid) {
- case SLIC_2GB_DEVICE_ID:
- instruction = (u32 *) &OasisUCode[section][0];
- baseaddress = sectstart[section];
- thissectionsize = sectsize[section] >> 3;
- lastinstruct =
- (u32 *) &OasisUCode[section][sectsize[section] -
- 8];
- break;
- case SLIC_1GB_DEVICE_ID:
- instruction = (u32 *) &MojaveUCode[section][0];
- baseaddress = sectstart[section];
- thissectionsize = sectsize[section] >> 3;
- lastinstruct =
- (u32 *) &MojaveUCode[section][sectsize[section]
- - 8];
- break;
- default:
- ASSERT(0);
- break;
- }
-
baseaddress = sectstart[section];
thissectionsize = sectsize[section] >> 3;
for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
- startinstruct = instruction;
- nextinstruct = ((unsigned char *)instruction) + 8;
/* Write out instruction address */
WRITE_REG(slic_regs->slic_wcs, baseaddress + codeaddr,
FLUSH);
/* Write out instruction to low addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ WRITE_REG(slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
+
/* Write out instruction to high addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ WRITE_REG(slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
}
}
-
+ index = ucode_start;
for (section = 0; section < numsects; section++) {
- switch (adapter->devid) {
- case SLIC_2GB_DEVICE_ID:
- instruction = (u32 *)&OasisUCode[section][0];
- break;
- case SLIC_1GB_DEVICE_ID:
- instruction = (u32 *)&MojaveUCode[section][0];
- break;
- default:
- ASSERT(0);
- break;
- }
-
+ instruction = *(u32 *)(fw->data + index);
baseaddress = sectstart[section];
if (baseaddress < 0x8000)
continue;
@@ -2347,41 +2328,35 @@ static int slic_card_download(struct ada
/* DBG_MSG ("slicoss: COMPARE secton[%x] baseaddr[%x] sectnsize[%x]\n",
(uint)section,baseaddress,thissectionsize);*/
-
for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
/* Write out instruction address */
WRITE_REG(slic_regs->slic_wcs,
SLIC_WCS_COMPARE | (baseaddress + codeaddr),
FLUSH);
/* Write out instruction to low addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ WRITE_REG(slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
/* Write out instruction to high addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ WRITE_REG(slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
+
/* Check SRAM location zero. If it is non-zero. Abort.*/
- failure = readl((u32 __iomem *)&slic_regs->slic_reset);
+/* failure = readl((u32 __iomem *)&slic_regs->slic_reset);
if (failure) {
DBG_MSG
- ("slicoss: %s FAILURE EXIT codeaddr[%x] \
- thissectionsize[%x] failure[%x]\n",
+ ("slicoss: %s FAILURE EXIT codeaddr[%x] "
+ "thissectionsize[%x] failure[%x]\n",
__func__, codeaddr, thissectionsize,
failure);
-
+ release_firmware(fw);
return -EIO;
- }
+ }*/
}
}
/* DBG_MSG ("slicoss: Compare done\n");*/
-
+ release_firmware(fw);
/* Everything OK, kick off the card */
mdelay(10);
WRITE_REG(slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);
@@ -2542,8 +2517,8 @@ static int slic_card_init(struct sliccar
i++;
if (i > 5000) {
DBG_ERROR
- ("SLIC: %d config data fetch timed\
- out!\n", adapter->port);
+ ("SLIC: %d config data fetch timed "
+ "out!\n", adapter->port);
DBG_MSG("%s shmem[%p] shmem->isr[%x]\n",
__func__, adapter->pshmem,
adapter->pshmem->isr);
@@ -2764,12 +2739,12 @@ static u32 slic_card_locate(struct adapt
#if DBG
if (adapter->devid == SLIC_2GB_DEVICE_ID) {
DBG_MSG
- ("SLICOSS ==> Initialize 2 Port Gigabit Server \
- and Storage Accelerator\n");
+ ("SLICOSS ==> Initialize 2 Port Gigabit Server "
+ "and Storage Accelerator\n");
} else {
DBG_MSG
- ("SLICOSS ==> Initialize 1 Port Gigabit Server \
- and Storage Accelerator\n");
+ ("SLICOSS ==> Initialize 1 Port Gigabit Server "
+ "and Storage Accelerator\n");
}
#endif
card->busnumber = adapter->busnumber;
@@ -2833,13 +2808,12 @@ static u32 slic_card_locate(struct adapt
}
if (!physcard) {
/* no structure allocated for this physical card yet */
- physcard = kmalloc(sizeof(struct physcard *), GFP_ATOMIC);
+ physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
ASSERT(physcard);
- memset(physcard, 0, sizeof(struct physcard *));
DBG_MSG
- ("\n%s Allocate a PHYSICALcard:\n PHYSICAL_Card[%p]\n\
- LogicalCard [%p]\n adapter [%p]\n",
+ ("\n%s Allocate a PHYSICALcard:\n PHYSICAL_Card[%p]\n"
+ " LogicalCard [%p]\n adapter [%p]\n",
__func__, physcard, card, adapter);
physcard->next = slic_global.phys_card;
@@ -4422,7 +4396,7 @@ static int slic_debug_card_show(struct s
unsigned char *oemfru = (unsigned char *)(&card->config.OemFru);
#endif
- seq_printf(seq, "driver_version : %s", slic_proc_version);
+ seq_printf(seq, "driver_version : %s\n", slic_proc_version);
seq_printf(seq, "Microcode versions: \n");
seq_printf(seq, " Gigabit (gb) : %s %s\n",
MOJAVE_UCODE_VERS_STRING, MOJAVE_UCODE_VERS_DATE);
On Sun, Dec 21, 2008 at 03:12:51PM +0200, Lior Dotan wrote:
> This patch uses request_firmware() to download the firmware to the card.
> It seems that some of my previous patches (including an earlier and not
> working version of this)
> are missing from your tree so they are also included here again.
> This code is more compact than the original as it reads all the meta data
> from the firmware
> file instead of having it hard coded.
> In addition some 32/64 bit dependent code was removed.
> I was able to test it on an actual board and verify that it indeed works.
> If this patch is accepted, I can send a patch to remove the static firmware
> from the tree.
Hm, this doesn't apply against the latest tree at all. Care to split
this up into the different patches which would make it easier for me to
apply?
thanks,
greg k-h
diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
index a8ea59d..e8d388d 100644
--- a/drivers/staging/slicoss/slic.h
+++ b/drivers/staging/slicoss/slic.h
@@ -46,30 +46,10 @@
#define OASIS_UCODE_VERS_DATE "2006/03/27 15:10:37"
#define OASIS_UCODE_HOSTIF_ID 3
-static s32 ONumSections = 0x2;
-static u32 OSectionSize[] = {
- 0x00004000, 0x00010000,
-};
-
-static u32 OSectionStart[] = {
- 0x00000000, 0x00008000,
-};
-
#define MOJAVE_UCODE_VERS_STRING "1.2"
#define MOJAVE_UCODE_VERS_DATE "2006/03/27 15:12:22"
#define MOJAVE_UCODE_HOSTIF_ID 3
-static s32 MNumSections = 0x2;
-static u32 MSectionSize[] =
-{
- 0x00008000, 0x00010000,
-};
-
-static u32 MSectionStart[] =
-{
- 0x00000000, 0x00008000,
-};
-
#define GB_RCVUCODE_VERS_STRING "1.2"
#define GB_RCVUCODE_VERS_DATE "2006/03/27 15:12:15"
static u32 OasisRcvUCodeLen = 512;
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index bf7da8f..2d7f1fa 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -2183,15 +2184,16 @@ static int slic_card_download_gbrcv(struct adapter *adapter)
int ret;
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
u32 codeaddr;
- unsigned char *instruction = NULL;
+ u32 instruction;
+ int index = 0;
u32 rcvucodelen = 0;
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
- file = "oasis_rcv.bin";
+ file = "oasisrcvucode.sys";
break;
case SLIC_1GB_DEVICE_ID:
- file = "gb_rcv.bin";
+ file = "gbrcvucode.sys";
break;
default:
ASSERT(0);
@@ -2204,8 +2206,8 @@ static int slic_card_download_gbrcv(struct adapter *adapter)
return ret;
}
- instruction = (unsigned char *)fw->data;
- rcvucodelen = fw->size;
+ rcvucodelen = *(u32 *)(fw->data + index);
+ index += 4;
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
if (rcvucodelen != OasisRcvUCodeLen)
@@ -2219,24 +2221,24 @@ static int slic_card_download_gbrcv(struct adapter *adapter)
ASSERT(0);
break;
}
-
/* start download */
WRITE_REG(slic_regs->slic_rcv_wcs, SLIC_RCVWCS_BEGIN, FLUSH);
-
/* download the rcv sequencer ucode */
for (codeaddr = 0; codeaddr < rcvucodelen; codeaddr++) {
/* write out instruction address */
WRITE_REG(slic_regs->slic_rcv_wcs, codeaddr, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
/* write out the instruction data low addr */
WRITE_REG(slic_regs->slic_rcv_wcs,
- (u32) *(u32 *) instruction, FLUSH);
- instruction += 4;
+ instruction, FLUSH);
+ instruction = *(u8 *)(fw->data + index);
+ index++;
/* write out the instruction data high addr */
- WRITE_REG(slic_regs->slic_rcv_wcs, (u32) *instruction,
+ WRITE_REG(slic_regs->slic_rcv_wcs, (u8)instruction,
FLUSH);
- instruction += 1;
}
/* download finished */
@@ -2254,16 +2256,14 @@ static int slic_card_download(struct adapter *adapter)
int thissectionsize;
int codeaddr;
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
- u32 *instruction = NULL;
- u32 *lastinstruct = NULL;
- u32 *startinstruct = NULL;
- unsigned char *nextinstruct;
+ u32 instruction;
u32 baseaddress;
u32 failure;
u32 i;
u32 numsects = 0;
u32 sectsize[3];
u32 sectstart[3];
+ int ucode_start, index = 0;
/* DBG_MSG ("slicoss: %s (%s) adapter[%p] card[%p] devid[%x] \
jiffies[%lx] cpu %d\n", __func__, adapter->netdev->name, adapter,
@@ -2271,24 +2271,10 @@ static int slic_card_download(struct adapter *adapter)
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
-/* DBG_MSG ("slicoss: %s devid==SLIC_2GB_DEVICE_ID sections[%x]\n",
- __func__, (uint) ONumSections); */
- file = "slic_oasis.bin";
- numsects = ONumSections;
- for (i = 0; i < numsects; i++) {
- sectsize[i] = OSectionSize[i];
- sectstart[i] = OSectionStart[i];
- }
+ file = "oasisdownload.sys";
break;
case SLIC_1GB_DEVICE_ID:
-/* DBG_MSG ("slicoss: %s devid==SLIC_1GB_DEVICE_ID sections[%x]\n",
- __func__, (uint) MNumSections); */
- file = "slic_mojave.bin";
- numsects = MNumSections;
- for (i = 0; i < numsects; i++) {
- sectsize[i] = MSectionSize[i];
- sectstart[i] = MSectionStart[i];
- }
+ file = "gbdownload.sys";
break;
default:
ASSERT(0);
@@ -2299,75 +2285,42 @@ static int slic_card_download(struct adapter *adapter)
printk(KERN_ERR "SLICOSS: Failed to load firmware %s\n", file);
return ret;
}
-
+ numsects = *(u32 *)(fw->data + index);
+ index += 4;
ASSERT(numsects <= 3);
-
+ for (i = 0; i < numsects; i++) {
+ sectsize[i] = *(u32 *)(fw->data + index);
+ index += 4;
+ }
+ for (i = 0; i < numsects; i++) {
+ sectstart[i] = *(u32 *)(fw->data + index);
+ index += 4;
+ }
+ ucode_start = index;
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
for (section = 0; section < numsects; section++) {
- switch (adapter->devid) {
- case SLIC_2GB_DEVICE_ID:
- instruction = (u32 *)(fw->data + (SECTION_SIZE *
- section));
- baseaddress = sectstart[section];
- thissectionsize = sectsize[section] >> 3;
- lastinstruct =
- (u32 *)(fw->data + (SECTION_SIZE * section) +
- sectsize[section] - 8);
- break;
- case SLIC_1GB_DEVICE_ID:
- instruction = (u32 *)(fw->data + (SECTION_SIZE *
- section));
- baseaddress = sectstart[section];
- thissectionsize = sectsize[section] >> 3;
- lastinstruct =
- (u32 *)(fw->data + (SECTION_SIZE * section) +
- sectsize[section] - 8);
- break;
- default:
- ASSERT(0);
- break;
- }
-
baseaddress = sectstart[section];
thissectionsize = sectsize[section] >> 3;
for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
- startinstruct = instruction;
- nextinstruct = ((unsigned char *)instruction) + 8;
/* Write out instruction address */
WRITE_REG(slic_regs->slic_wcs, baseaddress + codeaddr,
FLUSH);
/* Write out instruction to low addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ WRITE_REG(slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
+
/* Write out instruction to high addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ WRITE_REG(slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
}
}
-
+ index = ucode_start;
for (section = 0; section < numsects; section++) {
- switch (adapter->devid) {
- case SLIC_2GB_DEVICE_ID:
- instruction = (u32 *)fw->data + (SECTION_SIZE *
- section);
- break;
- case SLIC_1GB_DEVICE_ID:
- instruction = (u32 *)fw->data + (SECTION_SIZE *
- section);
- break;
- default:
- ASSERT(0);
- break;
- }
-
+ instruction = *(u32 *)(fw->data + index);
baseaddress = sectstart[section];
if (baseaddress < 0x8000)
continue;
@@ -2375,37 +2328,31 @@ static int slic_card_download(struct adapter *adapter)
/* DBG_MSG ("slicoss: COMPARE secton[%x] baseaddr[%x] sectnsize[%x]\n",
(uint)section,baseaddress,thissectionsize);*/
-
for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
/* Write out instruction address */
WRITE_REG(slic_regs->slic_wcs,
SLIC_WCS_COMPARE | (baseaddress + codeaddr),
FLUSH);
/* Write out instruction to low addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ WRITE_REG(slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
/* Write out instruction to high addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ WRITE_REG(slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
+
/* Check SRAM location zero. If it is non-zero. Abort.*/
- failure = readl((u32 __iomem *)&slic_regs->slic_reset);
+/* failure = readl((u32 __iomem *)&slic_regs->slic_reset);
if (failure) {
DBG_MSG
- ("slicoss: %s FAILURE EXIT codeaddr[%x] \
- thissectionsize[%x] failure[%x]\n",
+ ("slicoss: %s FAILURE EXIT codeaddr[%x] "
+ "thissectionsize[%x] failure[%x]\n",
__func__, codeaddr, thissectionsize,
failure);
release_firmware(fw);
return -EIO;
- }
+ }*/
}
}
/* DBG_MSG ("slicoss: Compare done\n");*/
@@ -2570,8 +2517,8 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
i++;
if (i > 5000) {
DBG_ERROR
- ("SLIC: %d config data fetch timed\
- out!\n", adapter->port);
+ ("SLIC: %d config data fetch timed "
+ "out!\n", adapter->port);
DBG_MSG("%s shmem[%p] shmem->isr[%x]\n",
__func__, adapter->pshmem,
adapter->pshmem->isr);
@@ -2792,12 +2739,12 @@ static u32 slic_card_locate(struct adapter *adapter)
#if DBG
if (adapter->devid == SLIC_2GB_DEVICE_ID) {
DBG_MSG
- ("SLICOSS ==> Initialize 2 Port Gigabit Server \
- and Storage Accelerator\n");
+ ("SLICOSS ==> Initialize 2 Port Gigabit Server "
+ "and Storage Accelerator\n");
} else {
DBG_MSG
- ("SLICOSS ==> Initialize 1 Port Gigabit Server \
- and Storage Accelerator\n");
+ ("SLICOSS ==> Initialize 1 Port Gigabit Server "
+ "and Storage Accelerator\n");
}
#endif
card->busnumber = adapter->busnumber;
@@ -2865,8 +2812,8 @@ static u32 slic_card_locate(struct adapter *adapter)
ASSERT(physcard);
DBG_MSG
- ("\n%s Allocate a PHYSICALcard:\n PHYSICAL_Card[%p]\n\
- LogicalCard [%p]\n adapter [%p]\n",
+ ("\n%s Allocate a PHYSICALcard:\n PHYSICAL_Card[%p]\n"
+ " LogicalCard [%p]\n adapter [%p]\n",
__func__, physcard, card, adapter);
physcard->next = slic_global.phys_card;
@@ -4449,7 +4396,7 @@ static int slic_debug_card_show(struct seq_file *seq, void *v)
unsigned char *oemfru = (unsigned char *)(&card->config.OemFru);
#endif
- seq_printf(seq, "driver_version : %s", slic_proc_version);
+ seq_printf(seq, "driver_version : %s\n", slic_proc_version);
seq_printf(seq, "Microcode versions: \n");
seq_printf(seq, " Gigabit (gb) : %s %s\n",
MOJAVE_UCODE_VERS_STRING, MOJAVE_UCODE_VERS_DATE);