2009-03-08 11:43:18

by Etienne Basset

Subject: [2.6.29-rc7][REGRESSION][FOUND] sound broken on Creative Labs SB Audigy

Hi Takashi,

on 2.6.29-rc7 my sound card Creative Labs SB Audigy doesn't work anymore
it worked in the previous -rc i tested (rc5)

dmesg
EMU10K1_Audigy 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Installing spdif_bug patch: SB Audigy 2 ZS [SB0353]

cat /proc/asound/cards
0 [Audigy2 ]: Audigy2 - SB Audigy 2 ZS [SB0353]
SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xcc80, irq 16


lscpi
03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
lspci -vvv
03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
Subsystem: Creative Labs Device 1003
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at cc80 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1

i've use alsa-info.sh, my info is stored at
http://www.alsa-project.org/db/?f=4460e77670d538196e11ae5e61e9b1f86fb9669b


if I revert the following commit, it works again


commit 1f9da5544073d38e05139f8ce9da24e78653c73e
Author: Takashi Iwai <[email protected]>
Date: Tue Feb 24 15:31:02 2009 +0100

ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS

Fix the inverted logic of shared spdif switch.

Reference: Novell bnc#478496
https://bugzilla.novell.com/show_bug.cgi?id=478496

Signed-off-by: Takashi Iwai <[email protected]>


thanks,
Etienne

2009-03-08 20:39:18

by Takashi Iwai

Subject: Re: [2.6.29-rc7][REGRESSION][FOUND] sound broken on Creative Labs SB Audigy

At Sun, 08 Mar 2009 12:43:01 +0100,
etienne wrote:
>
> Hi Takashi,
>
> on 2.6.29-rc7 my sound card Creative Labs SB Audigy doesn't work anymore
> it worked in the previous -rc i tested (rc5)
>
> dmesg
> EMU10K1_Audigy 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> Installing spdif_bug patch: SB Audigy 2 ZS [SB0353]
>
> cat /proc/asound/cards
> 0 [Audigy2 ]: Audigy2 - SB Audigy 2 ZS [SB0353]
> SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xcc80, irq 16
>
>
> lscpi
> 03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
> lspci -vvv
> 03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
> Subsystem: Creative Labs Device 1003
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (500ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at cc80 [size=64]
> Capabilities: <access denied>
> Kernel driver in use: EMU10K1_Audigy
> Kernel modules: snd-emu10k1
>
> i've use alsa-info.sh, my info is stored at
> http://www.alsa-project.org/db/?f=4460e77670d538196e11ae5e61e9b1f86fb9669b
>
>
> if I revert the following commit, it works again
>
>
> commit 1f9da5544073d38e05139f8ce9da24e78653c73e
> Author: Takashi Iwai <[email protected]>
> Date: Tue Feb 24 15:31:02 2009 +0100
>
> ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS
>
> Fix the inverted logic of shared spdif switch.
>
> Reference: Novell bnc#478496
> https://bugzilla.novell.com/show_bug.cgi?id=478496
>
> Signed-off-by: Takashi Iwai <[email protected]>

Check "Audigy Analog/Digital Output Jack" switch.
This must be *off* to output from the analog jacks.

Before the patch, it was wrongly implemented and the patch fixes
the (long-standing wrong) logic.


Takashi

2009-03-08 21:15:19

by Etienne Basset

Subject: Re: [2.6.29-rc7][REGRESSION][FOUND] sound broken on Creative Labs SB Audigy

Takashi Iwai wrote:
> At Sun, 08 Mar 2009 12:43:01 +0100,
> etienne wrote:
>> Hi Takashi,
>>
>> on 2.6.29-rc7 my sound card Creative Labs SB Audigy doesn't work anymore
>> it worked in the previous -rc i tested (rc5)
>>
>> dmesg
>> EMU10K1_Audigy 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> Installing spdif_bug patch: SB Audigy 2 ZS [SB0353]
>>
>> cat /proc/asound/cards
>> 0 [Audigy2 ]: Audigy2 - SB Audigy 2 ZS [SB0353]
>> SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xcc80, irq 16
>>
>>
>> lscpi
>> 03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
>> lspci -vvv
>> 03:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
>> Subsystem: Creative Labs Device 1003
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 64 (500ns min, 5000ns max)
>> Interrupt: pin A routed to IRQ 16
>> Region 0: I/O ports at cc80 [size=64]
>> Capabilities: <access denied>
>> Kernel driver in use: EMU10K1_Audigy
>> Kernel modules: snd-emu10k1
>>
>> i've use alsa-info.sh, my info is stored at
>> http://www.alsa-project.org/db/?f=4460e77670d538196e11ae5e61e9b1f86fb9669b
>>
>>
>> if I revert the following commit, it works again
>>
>>
>> commit 1f9da5544073d38e05139f8ce9da24e78653c73e
>> Author: Takashi Iwai <[email protected]>
>> Date: Tue Feb 24 15:31:02 2009 +0100
>>
>> ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS
>>
>> Fix the inverted logic of shared spdif switch.
>>
>> Reference: Novell bnc#478496
>> https://bugzilla.novell.com/show_bug.cgi?id=478496
>>
>> Signed-off-by: Takashi Iwai <[email protected]>
>
> Check "Audigy Analog/Digital Output Jack" switch.
> This must be *off* to output from the analog jacks.
>
> Before the patch, it was wrongly implemented and the patch fixes
> the (long-standing wrong) logic.
>
thanks, that works

Etienne