[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc1-25446-g1ae8c0a-dirty (lex@zwerg) (gcc version 4.4.0 (Ubuntu 4.4.0-8ubuntu2) ) #3 SMP Mon Jul 6 11:44:53 CEST 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz root=UUID=0db19d83-143f-4a8d-8f62-0775623b62b1 ro quiet splash memory_corruption_check_size=128k
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd90e000 (usable)
[ 0.000000] BIOS-e820: 00000000bd90e000 - 00000000bd930000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd930000 - 00000000bda48000 (reserved)
[ 0.000000] BIOS-e820: 00000000bda48000 - 00000000bda5c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bda5c000 - 00000000bdb5b000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb5b000 - 00000000bdb5c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb5c000 - 00000000bdb64000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdb64000 - 00000000bdb6e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb6e000 - 00000000bdb8c000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb8c000 - 00000000bdb92000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb92000 - 00000000bdd00000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Intel BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0BDD00000 mask FFFF00000 write-through
[ 0.000000] 2 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13C000000 mask FFC000000 uncachable
[ 0.000000] last_pfn = 0xbdd00 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000010000 - 0000000000020000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000020000 (reserved)
[ 0.000000] modified: 0000000000020000 - 000000000009e800 (usable)
[ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bd90e000 (usable)
[ 0.000000] modified: 00000000bd90e000 - 00000000bd930000 (ACPI NVS)
[ 0.000000] modified: 00000000bd930000 - 00000000bda48000 (reserved)
[ 0.000000] modified: 00000000bda48000 - 00000000bda5c000 (ACPI NVS)
[ 0.000000] modified: 00000000bda5c000 - 00000000bdb5b000 (reserved)
[ 0.000000] modified: 00000000bdb5b000 - 00000000bdb5c000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb5c000 - 00000000bdb64000 (ACPI data)
[ 0.000000] modified: 00000000bdb64000 - 00000000bdb6e000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb6e000 - 00000000bdb8c000 (reserved)
[ 0.000000] modified: 00000000bdb8c000 - 00000000bdb92000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb92000 - 00000000bdd00000 (usable)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bdd00000
[ 0.000000] 0000000000 - 00bdc00000 page 2M
[ 0.000000] 00bdc00000 - 00bdd00000 page 4k
[ 0.000000] kernel direct mapping tables up to bdd00000 @ 20000-25000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000
[ 0.000000] 0100000000 - 013c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 13c000000 @ 23000-29000
[ 0.000000] RAMDISK: 37858000 - 37fefbe0
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000bdb62e18 0004C (v01 INTEL DG45ID 0000006B MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000bdb61d98 000F4 (v04 INTEL A M I 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! 20090521 tbfadt-370
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - BDB65F40/00000000BDB6BE40, using 32 20090521 tbfadt-487
[ 0.000000] ACPI: DSDT 00000000bdb5c018 0492F (v01 INTEL DG45ID 0000006B INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bdb65f40 00040
[ 0.000000] ACPI: APIC 00000000bdb61f18 0006C (v02 INTEL DG45ID 0000006B MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000bdb6cd98 0003C (v01 INTEL DG45ID 0000006B MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000bdb6bc18 000A0 (v32 INTEL DG45ID 0000006B TFSM 000F4240)
[ 0.000000] ACPI: HPET 00000000bdb6cd18 00038 (v01 INTEL DG45ID 0000006B AMI. 00000003)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 013c000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000184ec48] TEXT DATA BSS ==> [0001000000 - 000184ec48]
[ 0.000000] #3 [0037858000 - 0037fefbe0] RAMDISK ==> [0037858000 - 0037fefbe0]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #5 [000184f000 - 000184f1ec] BRK ==> [000184f000 - 000184f1ec]
[ 0.000000] #6 [0000020000 - 0000023000] PGTABLE ==> [0000020000 - 0000023000]
[ 0.000000] #7 [0000023000 - 0000024000] PGTABLE ==> [0000023000 - 0000024000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000020 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000020 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd90e
[ 0.000000] 0: 0x000bdb92 -> 0x000bdd00
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1022458
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3806 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 758452 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd90e000 - 00000000bd930000
[ 0.000000] PM: Registered nosave memory: 00000000bd930000 - 00000000bda48000
[ 0.000000] PM: Registered nosave memory: 00000000bda48000 - 00000000bda5c000
[ 0.000000] PM: Registered nosave memory: 00000000bda5c000 - 00000000bdb5b000
[ 0.000000] PM: Registered nosave memory: 00000000bdb5b000 - 00000000bdb5c000
[ 0.000000] PM: Registered nosave memory: 00000000bdb5c000 - 00000000bdb64000
[ 0.000000] PM: Registered nosave memory: 00000000bdb64000 - 00000000bdb6e000
[ 0.000000] PM: Registered nosave memory: 00000000bdb6e000 - 00000000bdb8c000
[ 0.000000] PM: Registered nosave memory: 00000000bdb8c000 - 00000000bdb92000
[ 0.000000] PM: Registered nosave memory: 00000000bdd00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bdd00000 (gap: bdd00000:4101c000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff880028022000, static data 82464 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1004658
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=UUID=0db19d83-143f-4a8d-8f62-0775623b62b1 ro quiet splash memory_corruption_check_size=128k
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 3942724k/5177344k available (4825k kernel code, 1087512k absent, 146172k reserved, 2464k data, 428k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.334 MHz processor.
[ 0.000998] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.004000] allocated 41943040 bytes of page_cgroup
[ 0.004000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.66 BogoMIPS (lpj=12001336)
[ 0.004000] Security Framework initialized
[ 0.004000] Smack: Initializing.
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] Performance Counters: Core2 events, Intel PMU driver.
[ 0.004000] ... version: 2
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic counters: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 000000007fffffff
[ 0.004000] ... fixed-purpose counters: 3
[ 0.004000] ... counter mask: 0000000700000003
[ 0.004000] ACPI: Core revision 20090521
[ 0.005815] Setting APIC routing to flat
[ 0.006134] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.045839] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
[ 0.048001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5999.23 BogoMIPS (lpj=11998465)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.132680] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
[ 0.132687] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.136019] Brought up 2 CPUs
[ 0.136021] Total of 2 processors activated (11999.90 BogoMIPS).
[ 0.136064] CPU0 attaching sched-domain:
[ 0.136066] domain 0: span 0-1 level MC
[ 0.136067] groups: 0 1
[ 0.136071] CPU1 attaching sched-domain:
[ 0.136072] domain 0: span 0-1 level MC
[ 0.136073] groups: 1 0
[ 0.136127] regulator: core version 0.5
[ 0.136127] Time: 10:10:36 Date: 07/06/09
[ 0.136127] NET: Registered protocol family 16
[ 0.136127] ACPI: bus type pci registered
[ 0.136127] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.136127] PCI: Not using MMCONFIG.
[ 0.136127] PCI: Using configuration type 1 for base access
[ 0.136127] bio: create slab <bio-0> at 0
[ 0.136399] ACPI: EC: Look up EC in DSDT
[ 0.142869] ACPI: BIOS _OSI(Linux) query ignored
[ 0.144360] ACPI: Interpreter enabled
[ 0.144363] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.144377] ACPI: Using IOAPIC for interrupt routing
[ 0.144465] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.144516] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.146752] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.149884] ACPI: No dock devices found.
[ 0.149884] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.149884] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
[ 0.149884] pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.149884] pci 0000:00:02.0: reg 20 io port: [0xf1c0-0xf1c7]
[ 0.149884] pci 0000:00:02.1: reg 10 64bit mmio: [0xd0400000-0xd04fffff]
[ 0.149884] pci 0000:00:03.0: reg 10 64bit mmio: [0xd0526100-0xd052610f]
[ 0.149884] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.149884] pci 0000:00:03.0: PME# disabled
[ 0.149884] pci 0000:00:19.0: reg 10 32bit mmio: [0xd0500000-0xd051ffff]
[ 0.149884] pci 0000:00:19.0: reg 14 32bit mmio: [0xd0524000-0xd0524fff]
[ 0.149884] pci 0000:00:19.0: reg 18 io port: [0xf100-0xf11f]
[ 0.149884] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.149884] pci 0000:00:19.0: PME# disabled
[ 0.149884] pci 0000:00:1a.0: reg 20 io port: [0xf0e0-0xf0ff]
[ 0.149884] pci 0000:00:1a.1: reg 20 io port: [0xf0c0-0xf0df]
[ 0.149884] pci 0000:00:1a.2: reg 20 io port: [0xf0a0-0xf0bf]
[ 0.149884] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd0525c00-0xd0525fff]
[ 0.149884] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.149884] pci 0000:00:1a.7: PME# disabled
[ 0.149884] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0520000-0xd0523fff]
[ 0.149884] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.149884] pci 0000:00:1b.0: PME# disabled
[ 0.149884] pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f]
[ 0.149884] pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f]
[ 0.149884] pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f]
[ 0.149884] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0525800-0xd0525bff]
[ 0.152031] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.152035] pci 0000:00:1d.7: PME# disabled
[ 0.152131] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.152134] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.152137] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.152189] pci 0000:00:1f.2: reg 10 io port: [0xf1b0-0xf1b7]
[ 0.152194] pci 0000:00:1f.2: reg 14 io port: [0xf1a0-0xf1a3]
[ 0.152198] pci 0000:00:1f.2: reg 18 io port: [0xf190-0xf197]
[ 0.152202] pci 0000:00:1f.2: reg 1c io port: [0xf180-0xf183]
[ 0.152207] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
[ 0.152211] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0525000-0xd05257ff]
[ 0.152235] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.152237] pci 0000:00:1f.2: PME# disabled
[ 0.152259] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd0526000-0xd05260ff]
[ 0.152270] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[ 0.152304] pci 0000:00:1f.5: reg 10 io port: [0xf170-0xf177]
[ 0.152308] pci 0000:00:1f.5: reg 14 io port: [0xf160-0xf163]
[ 0.152312] pci 0000:00:1f.5: reg 18 io port: [0xf150-0xf157]
[ 0.152317] pci 0000:00:1f.5: reg 1c io port: [0xf140-0xf143]
[ 0.152321] pci 0000:00:1f.5: reg 20 io port: [0xf130-0xf13f]
[ 0.152325] pci 0000:00:1f.5: reg 24 io port: [0xf120-0xf12f]
[ 0.152387] pci 0000:00:1e.0: transparent bridge
[ 0.152398] pci_bus 0000:00: on NUMA node 0
[ 0.152401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.152490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.156177] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.156177] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.156191] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.156259] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.156329] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.156398] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.156466] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.156534] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.156567] SCSI subsystem initialized
[ 0.156567] libata version 3.00 loaded.
[ 0.156567] usbcore: registered new interface driver usbfs
[ 0.156567] usbcore: registered new interface driver hub
[ 0.156567] usbcore: registered new device driver usb
[ 0.156567] ACPI: WMI: Mapper loaded
[ 0.156567] PCI: Using ACPI for IRQ routing
[ 0.176007] NET: Registered protocol family 8
[ 0.176009] NET: Registered protocol family 20
[ 0.176022] NetLabel: Initializing
[ 0.176022] NetLabel: domain hash size = 128
[ 0.176022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.176030] NetLabel: unlabeled traffic allowed by default
[ 0.176052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.176057] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.199966] pnp: PnP ACPI init
[ 0.199974] ACPI: bus type pnp registered
[ 0.201519] pnp: PnP ACPI: found 10 devices
[ 0.201520] ACPI: ACPI bus type pnp unregistered
[ 0.201527] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.201529] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.201531] system 00:01: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.201534] system 00:02: ioport range 0xa20-0xa3f has been reserved
[ 0.201536] system 00:02: ioport range 0xa00-0xa1f has been reserved
[ 0.201537] system 00:02: ioport range 0xb78-0xb7f has been reserved
[ 0.201539] system 00:02: ioport range 0xf78-0xf7f has been reserved
[ 0.201543] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.201546] system 00:08: ioport range 0x400-0x47f has been reserved
[ 0.201548] system 00:08: ioport range 0x1180-0x119f has been reserved
[ 0.201550] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.201552] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.201554] system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved
[ 0.201556] system 00:08: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.201557] system 00:08: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.201559] system 00:08: iomem range 0xff000000-0xffffffff has been reserved
[ 0.206306] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.206308] pci 0000:00:1e.0: IO window: disabled
[ 0.206311] pci 0000:00:1e.0: MEM window: disabled
[ 0.206314] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.206322] pci 0000:00:1e.0: setting latency timer to 64
[ 0.206325] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.206326] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.206328] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.206329] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.206347] NET: Registered protocol family 2
[ 0.206397] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.206701] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.207830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.208170] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.208172] TCP reno registered
[ 0.208236] NET: Registered protocol family 1
[ 0.208286] Trying to unpack rootfs image as initramfs...
[ 0.327049] Freeing initrd memory: 7774k freed
[ 0.329581] Machine check injector initialized
[ 0.329646] Scanning for low memory corruption every 60 seconds
[ 0.329821] audit: initializing netlink socket (disabled)
[ 0.329833] type=2000 audit(1246875036.327:1): initialized
[ 0.335640] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.337221] VFS: Disk quotas dquot_6.5.2
[ 0.337273] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.337734] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.337777] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.337809] fuse init (API version 7.11)
[ 0.337905] msgmni has been set to 7717
[ 0.338064] alg: No test for stdrng (krng)
[ 0.338129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.338131] io scheduler noop registered
[ 0.338132] io scheduler anticipatory registered
[ 0.338134] io scheduler deadline registered
[ 0.338141] io scheduler cfq registered (default)
[ 0.338150] pci 0000:00:02.0: Boot video device
[ 0.500200] Switched to high resolution mode on CPU 1
[ 0.503484] Switched to high resolution mode on CPU 0
[ 1.936005] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.536005] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.536378] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.536380] ACPI: Power Button [PWRF]
[ 3.536432] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.536437] ACPI: Power Button [PWRB]
[ 3.536773] ACPI: SSDT 00000000bdb65c18 002CC (v01 AMI IST 00000001 MSFT 03000001)
[ 3.537034] Marking TSC unstable due to TSC halts in idle
[ 3.537065] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.537094] processor LNXCPU:00: registered as cooling_device0
[ 3.537267] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.537293] processor LNXCPU:01: registered as cooling_device1
[ 3.540242] Linux agpgart interface v0.103
[ 3.540252] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
[ 3.541508] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 3.544095] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 3.544172] [drm] Initialized drm 1.1.0 20060810
[ 3.544187] alloc irq_desc for 16 on node -1
[ 3.544188] alloc kstat_irqs on node -1
[ 3.544194] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.544196] i915 0000:00:02.0: setting latency timer to 64
[ 3.547450] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 3.547452] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.547462] alloc irq_desc for 24 on node -1
[ 3.547463] alloc kstat_irqs on node -1
[ 3.547468] i915 0000:00:02.0: irq 24 for MSI/MSI-X
[ 3.552612] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B
[ 3.563314] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C
[ 4.249192] [drm] TMDS-12: set mode 1920x1080 1f
[ 4.319108] Console: switching to colour frame buffer device 240x67
[ 4.369011] [drm] fb0: inteldrmfb frame buffer device
[ 4.369062] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD 20090521 video-1851
[ 4.369113] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:15/input/input2
[ 4.369117] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 4.369149] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.370359] brd: module loaded
[ 4.370938] loop: module loaded
[ 4.371057] ahci 0000:00:1f.2: version 3.0
[ 4.371066] alloc irq_desc for 19 on node -1
[ 4.371068] alloc kstat_irqs on node -1
[ 4.371073] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.371092] alloc irq_desc for 25 on node -1
[ 4.371093] alloc kstat_irqs on node -1
[ 4.371098] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
[ 4.371156] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 4.371158] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems
[ 4.371161] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.408045] scsi0 : ahci
[ 4.408179] scsi1 : ahci
[ 4.408254] scsi2 : ahci
[ 4.408332] scsi3 : ahci
[ 4.408405] scsi4 : ahci
[ 4.408477] scsi5 : ahci
[ 4.408546] ata1: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525100 irq 25
[ 4.408549] ata2: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525180 irq 25
[ 4.408551] ata3: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525200 irq 25
[ 4.408553] ata4: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525280 irq 25
[ 4.408555] ata5: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525300 irq 25
[ 4.408557] ata6: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525380 irq 25
[ 4.408609] ata_piix 0000:00:1f.5: version 2.13
[ 4.408615] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.408619] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.408642] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.408680] scsi6 : ata_piix
[ 4.408771] scsi7 : ata_piix
[ 4.408834] ata7: SATA max UDMA/133 cmd 0xf170 ctl 0xf160 bmdma 0xf130 irq 19
[ 4.408837] ata8: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma 0xf138 irq 19
[ 4.408921] Fixed MDIO Bus: probed
[ 4.409022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.409033] alloc irq_desc for 18 on node -1
[ 4.409034] alloc kstat_irqs on node -1
[ 4.409037] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.409043] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.409046] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.409082] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.412971] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.412976] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.412984] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0525c00
[ 4.428009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.428104] usb usb1: configuration #1 chosen from 1 choice
[ 4.428155] hub 1-0:1.0: USB hub found
[ 4.428166] hub 1-0:1.0: 6 ports detected
[ 4.428204] alloc irq_desc for 23 on node -1
[ 4.428205] alloc kstat_irqs on node -1
[ 4.428208] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.428213] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.428216] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.428254] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.432136] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.432140] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.432149] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0525800
[ 4.448009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.448085] usb usb2: configuration #1 chosen from 1 choice
[ 4.448134] hub 2-0:1.0: USB hub found
[ 4.448140] hub 2-0:1.0: 6 ports detected
[ 4.448204] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.448255] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.448259] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.448262] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.448299] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.448324] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0e0
[ 4.448391] usb usb3: configuration #1 chosen from 1 choice
[ 4.448427] hub 3-0:1.0: USB hub found
[ 4.448431] hub 3-0:1.0: 2 ports detected
[ 4.448458] alloc irq_desc for 21 on node -1
[ 4.448459] alloc kstat_irqs on node -1
[ 4.448462] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.448466] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.448468] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.448504] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.448530] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0c0
[ 4.448592] usb usb4: configuration #1 chosen from 1 choice
[ 4.448627] hub 4-0:1.0: USB hub found
[ 4.448631] hub 4-0:1.0: 2 ports detected
[ 4.448664] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.448668] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.448670] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.448710] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.448729] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f0a0
[ 4.448791] usb usb5: configuration #1 chosen from 1 choice
[ 4.448825] hub 5-0:1.0: USB hub found
[ 4.448829] hub 5-0:1.0: 2 ports detected
[ 4.448856] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.448860] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.448863] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.448900] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.448919] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 4.448982] usb usb6: configuration #1 chosen from 1 choice
[ 4.449019] hub 6-0:1.0: USB hub found
[ 4.449023] hub 6-0:1.0: 2 ports detected
[ 4.449052] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.449056] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.449058] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.449095] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.449115] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 4.449181] usb usb7: configuration #1 chosen from 1 choice
[ 4.449214] hub 7-0:1.0: USB hub found
[ 4.449218] hub 7-0:1.0: 2 ports detected
[ 4.449246] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.449250] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.449252] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.449287] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.449306] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 4.449375] usb usb8: configuration #1 chosen from 1 choice
[ 4.449409] hub 8-0:1.0: USB hub found
[ 4.449412] hub 8-0:1.0: 2 ports detected
[ 4.449521] usbcore: registered new interface driver usbserial
[ 4.449548] USB Serial support registered for generic
[ 4.449579] usbcore: registered new interface driver usbserial_generic
[ 4.449580] usbserial: USB Serial Driver core
[ 4.449694] PNP: No PS/2 controller found. Probing ports directly.
[ 4.449755] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 4.454008] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.454011] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.454092] mice: PS/2 mouse device common for all mice
[ 4.454226] rtc_cmos 00:04: RTC can wake from S4
[ 4.454265] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.454287] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 4.454394] device-mapper: uevent: version 1.0.3
[ 4.454483] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[ 4.454565] device-mapper: multipath: version 1.1.0 loaded
[ 4.454567] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.454875] cpuidle: using governor ladder
[ 4.455239] cpuidle: using governor menu
[ 4.456326] usbcore: registered new interface driver hiddev
[ 4.456367] usbcore: registered new interface driver usbhid
[ 4.456368] usbhid: v2.6:USB HID core driver
[ 4.456565] TCP cubic registered
[ 4.456820] NET: Registered protocol family 10
[ 4.457112] lo: Disabled Privacy Extensions
[ 4.457286] NET: Registered protocol family 17
[ 4.457819] PM: Resume from disk failed.
[ 4.457828] registered taskstats version 1
[ 4.457890] Magic number: 1:132:173
[ 4.457951] rtc_cmos 00:04: setting system clock to 2009-07-06 10:10:41 UTC (1246875041)
[ 4.457953] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.457954] EDD information not available.
[ 4.728095] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.728110] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.728126] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.728140] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.728154] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.728166] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.738871] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.749620] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.749663] ata2.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.06, max UDMA/66
[ 4.749796] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 4.749798] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.750618] ata1.00: configured for UDMA/133
[ 4.750687] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 4.750854] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.750880] sd 0:0:0:0: [sda] Write Protect is off
[ 4.750882] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.750896] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.750972] sda:
[ 4.751056] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.752011] ata2.00: configured for UDMA/66
[ 4.766977] sda1 sda2 sda3 < sda5 sda6 sda7
[ 4.814659] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.06 PQ: 0 ANSI: 5
[ 4.817792] sda8 sda9 sda10 sda11 >
[ 4.868078] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.938023] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 4.938025] Uniform CD-ROM driver Revision: 3.20
[ 4.938132] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.938214] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.938283] Freeing unused kernel memory: 428k freed
[ 4.938367] Write protecting the kernel read-only data: 6888k
[ 4.989020] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 5.001013] Clocksource tsc unstable (delta = -139605202 ns)
[ 5.146413] usb 3-1: configuration #1 chosen from 1 choice
[ 5.163604] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 5.163667] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1/input0
[ 5.187426] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 5.187474] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.0-1/input1
[ 5.425023] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 5.601412] usb 3-2: configuration #1 chosen from 1 choice
[ 5.616516] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 5.616558] generic-usb 0003:046D:C00E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 6.374731] PM: Starting manual resume from disk
[ 6.374733] PM: Resume from partition 8:10
[ 6.374734] PM: Checking hibernation image.
[ 6.374843] PM: Resume from disk failed.
[ 6.396170] EXT4-fs (dm-0): barriers enabled
[ 6.401940] kjournald2 starting: pid 1483, dev dm-0:8, commit interval 5 seconds
[ 6.401947] EXT4-fs (dm-0): delayed allocation enabled
[ 6.401948] EXT4-fs: file extents enabled
[ 6.402417] EXT4-fs: mballoc enabled
[ 6.402426] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 7.096275] <6>cp[1531]: segfault at 7ffea98a1cb8 ip 00007f02d871a255 sp 00007ffea98a1cc0 error 6 in libattr.so.1.1.0[7f02d8718000+4000]
[ 9.640437] udev: starting version 144
[ 10.669599] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 10.669601] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 10.669635] alloc irq_desc for 20 on node -1
[ 10.669636] alloc kstat_irqs on node -1
[ 10.669641] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 10.669648] e1000e 0000:00:19.0: setting latency timer to 64
[ 10.669705] alloc irq_desc for 26 on node -1
[ 10.669706] alloc kstat_irqs on node -1
[ 10.669713] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 10.734693] iTCO_vendor_support: vendor-support=0
[ 10.759366] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:9b:a9:1a
[ 10.759368] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 10.759393] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
[ 10.778764] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 10.778816] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[ 10.778861] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.848139] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 11.904062] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 11.904414] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.386264] alloc irq_desc for 22 on node -1
[ 12.386266] alloc kstat_irqs on node -1
[ 12.386272] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.386305] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.505521] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 13.477772] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 13.477774] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 13.478101] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.514777] Adding 8787512k swap on /dev/sda10. Priority:-1 extents:1 across:8787512k
[ 14.039413] 0000:00:19.0: eth0: changing MTU from 1500 to 1492
[ 14.040983] EXT4-fs (dm-0): internal journal on dm-0:8
[ 14.947183] EXT4-fs (sda6): barriers enabled
[ 14.947330] kjournald2 starting: pid 2279, dev sda6:8, commit interval 5 seconds
[ 14.947485] EXT4-fs (sda6): internal journal on sda6:8
[ 14.947488] EXT4-fs (sda6): delayed allocation enabled
[ 14.947489] EXT4-fs: file extents enabled
[ 14.947531] EXT4-fs: mballoc enabled
[ 14.947542] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 14.971356] EXT4-fs (sda8): barriers enabled
[ 14.971526] kjournald2 starting: pid 2280, dev sda8:8, commit interval 5 seconds
[ 14.971693] EXT4-fs (sda8): internal journal on sda8:8
[ 14.971695] EXT4-fs (sda8): delayed allocation enabled
[ 14.971696] EXT4-fs: file extents enabled
[ 14.972028] EXT4-fs: mballoc enabled
[ 14.972036] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 14.988866] EXT4-fs (sda9): barriers enabled
[ 14.988998] kjournald2 starting: pid 2281, dev sda9:8, commit interval 5 seconds
[ 14.989154] EXT4-fs (sda9): internal journal on sda9:8
[ 14.989156] EXT4-fs (sda9): delayed allocation enabled
[ 14.989157] EXT4-fs: file extents enabled
[ 14.991530] EXT4-fs: mballoc enabled
[ 14.991536] EXT4-fs (sda9): mounted filesystem with ordered data mode
[ 15.249489] <6>mv[2412]: segfault at 7ffe79da6ac8 ip 00007fae1a1b4255 sp 00007ffe79da6ad0 error 6 in libattr.so.1.1.0[7fae1a1b2000+4000]
[ 15.664774] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 15.664777] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 22.730643] <6>mv[3493]: segfault at 7ffeb758cf28 ip 00007f23349c9255 sp 00007ffeb758cf30 error 6 in libattr.so.1.1.0[7f23349c7000+4000]
[ 23.569007] eth0: no IPv6 routers present
[ 166.235008] PM: Syncing filesystems ... done.
[ 166.439822] PM: Preparing system for mem sleep
[ 166.660026] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 166.660595] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 166.660618] PM: Entering mem sleep
[ 166.660626] Suspending console(s) (use no_console_suspend to debug)
[ 166.696098] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 166.696242] sd 0:0:0:0: [sda] Stopping disk
[ 167.175115] ata_piix 0000:00:1f.5: PCI INT B disabled
[ 167.300092] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 167.300098] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 167.300104] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 167.300109] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 167.300122] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 167.300155] ACPI handle has no context!
[ 167.316093] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 167.316099] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 167.316104] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 167.316109] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 167.374363] e1000e 0000:00:19.0: PCI INT A disabled
[ 167.374368] e1000e 0000:00:19.0: PME# enabled
[ 167.374377] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 167.416729] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 1
[ 167.416733] render error detected, EIR: 0x00000010
[ 167.416734] page table error
[ 167.416735] PGTBL_ER: 0x00100000
[ 167.416737] [drm:i915_driver_irq_handler] *ERROR* EIR stuck: 0x00000010, masking
[ 167.432106] PM: suspend devices took 0.772 seconds
[ 167.432231] ehci_hcd 0000:00:1d.7: PME# disabled
[ 167.448119] ehci_hcd 0000:00:1a.7: PME# disabled
[ 167.464957] ACPI: Preparing to enter system sleep state S3
[ 167.466165] Disabling non-boot CPUs ...
[ 167.468291] kvm: disabling virtualization on CPU1
[ 167.468318] CPU 1 is now offline
[ 167.468320] SMP alternatives: switching to UP code
[ 167.474172] CPU0 attaching NULL sched-domain.
[ 167.474175] CPU1 attaching NULL sched-domain.
[ 167.474180] CPU0 attaching NULL sched-domain.
[ 167.474319] CPU1 is down
[ 167.474354] Extended CMOS year: 2000
[ 167.474354] Back to C!
[ 167.474354] CPU0: Thermal LVT vector (0xfa) already installed
[ 167.474354] Extended CMOS year: 2000
[ 167.474354] Enabling non-boot CPUs ...
[ 167.474354] SMP alternatives: switching to SMP code
[ 167.478330] Booting processor 1 APIC 0x1 ip 0x6000
[ 167.474062] Initializing CPU#1
[ 167.474062] Calibrating delay using timer specific routine.. 6002.34 BogoMIPS (lpj=12004683)
[ 167.474062] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 167.474062] CPU: L2 cache: 6144K
[ 167.474062] CPU: Physical Processor ID: 0
[ 167.474062] CPU: Processor Core ID: 1
[ 167.474062] mce: CPU supports 6 MCE banks
[ 167.474062] CPU1: Thermal monitoring enabled (TM2)
[ 167.568725] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
[ 167.568732] kvm: enabling virtualization on CPU1
[ 167.568779] CPU0 attaching NULL sched-domain.
[ 167.569010] Switched to high resolution mode on CPU 1
[ 167.584009] CPU0 attaching sched-domain:
[ 167.584011] domain 0: span 0-1 level MC
[ 167.584012] groups: 0 1
[ 167.584014] CPU1 attaching sched-domain:
[ 167.584015] domain 0: span 0-1 level MC
[ 167.584017] groups: 1 0
[ 167.585008] CPU1 is up
[ 167.585010] ACPI: Waking up from system sleep state S3
[ 167.585671] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 167.585675] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0xf1c1)
[ 167.585678] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
[ 167.585680] i915 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0000004)
[ 167.585683] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900407)
[ 167.585697] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xd0400004)
[ 167.585700] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 167.585711] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x1f2, writing 0x10b)
[ 167.585724] pci 0000:00:03.0: restoring config space at offset 0x5 (was 0x18f2, writing 0x0)
[ 167.585727] pci 0000:00:03.0: restoring config space at offset 0x4 (was 0xfed10004, writing 0xd0526104)
[ 167.585747] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 167.585756] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xf101)
[ 167.585759] e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xd0524000)
[ 167.585762] e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0500000)
[ 167.585767] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 167.585781] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 167.585789] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0xf0e1)
[ 167.585797] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 167.585809] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x203)
[ 167.585817] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0xf0c1)
[ 167.585825] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 167.585836] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x304)
[ 167.585844] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0xf0a1)
[ 167.585852] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 167.585868] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x304)
[ 167.585881] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0525c00)
[ 167.585886] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 167.585899] ehci_hcd 0000:00:1a.7: PME# disabled
[ 167.585910] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 167.585921] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 167.585925] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 167.585939] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 167.585947] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0xf081)
[ 167.585955] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 167.585966] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x203)
[ 167.585974] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xf061)
[ 167.585982] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 167.585993] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x304)
[ 167.586001] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xf041)
[ 167.586009] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
[ 167.586026] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 167.586038] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0525800)
[ 167.586043] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 167.586056] ehci_hcd 0000:00:1d.7: PME# disabled
[ 167.586066] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 167.586069] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 167.586072] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x0, writing 0x20010100)
[ 167.586078] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[ 167.586129] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 167.586147] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x300, writing 0x304)
[ 167.586155] pci 0000:00:1f.3: restoring config space at offset 0x8 (was 0x1181, writing 0xf001)
[ 167.586160] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xd0526004)
[ 167.586165] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800003)
[ 167.588814] i915 0000:00:02.0: setting latency timer to 64
[ 167.650109] [drm] TMDS-12: set mode 1920x1080 1f
[ 167.650151] pci 0000:00:02.1: PME# disabled
[ 167.650154] pci 0000:00:03.0: PME# disabled
[ 167.650191] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 167.650193] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[ 167.650196] e1000e 0000:00:19.0: setting latency timer to 64
[ 167.650200] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 167.650202] e1000e 0000:00:19.0: PME# disabled
[ 167.650204] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 167.650206] e1000e 0000:00:19.0: PME# disabled
[ 167.650230] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 167.708191] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 167.708196] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 167.708216] usb usb3: root hub lost power or was reset
[ 167.708242] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 167.708247] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 167.708265] usb usb4: root hub lost power or was reset
[ 167.708281] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 167.708286] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 167.708305] usb usb5: root hub lost power or was reset
[ 167.708321] ehci_hcd 0000:00:1a.7: PME# disabled
[ 167.708324] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 167.708329] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 167.708367] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 167.708371] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 167.708389] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 167.708393] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 167.708412] usb usb6: root hub lost power or was reset
[ 167.708430] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 167.708436] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 167.708457] usb usb7: root hub lost power or was reset
[ 167.708472] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 167.708477] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 167.708495] usb usb8: root hub lost power or was reset
[ 167.708511] ehci_hcd 0000:00:1d.7: PME# disabled
[ 167.708515] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 167.708520] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 167.708529] pci 0000:00:1e.0: setting latency timer to 64
[ 167.708575] ahci 0000:00:1f.2: setting latency timer to 64
[ 167.708695] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 167.708699] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 168.028029] ata6: SATA link down (SStatus 0 SControl 300)
[ 168.038866] ata8: SATA link down (SStatus 0 SControl 300)
[ 168.049718] ata7: SATA link down (SStatus 0 SControl 300)
[ 168.049736] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 168.049754] ata5: SATA link down (SStatus 0 SControl 300)
[ 168.050554] sd 0:0:0:0: [sda] Starting disk
[ 168.053856] ata2.00: configured for UDMA/66
[ 168.060030] ata4: SATA link down (SStatus 0 SControl 300)
[ 168.072028] ata3: SATA link down (SStatus 0 SControl 300)
[ 168.084741] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 168.084743] ata2: irq_stat 0x40000001
[ 168.088857] ata2.00: configured for UDMA/66
[ 168.088859] ata2: EH complete
[ 169.357849] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 169.357851] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 173.076075] ata1: link is slow to respond, please be patient (ready=0)
[ 175.596083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 175.626681] ata1.00: configured for UDMA/133
[ 175.626689] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 175.626691] ata1: irq_stat 0x00400040, connection status changed
[ 175.628227] ata1.00: configured for UDMA/133
[ 175.628229] ata1: EH complete
[ 175.888086] usb 3-1: reset low speed USB device using uhci_hcd and address 2
[ 176.460078] usb 3-2: reset low speed USB device using uhci_hcd and address 3
[ 176.763922] PM: resume devices took 9.176 seconds
[ 176.763924] ------------[ cut here ]------------
[ 176.763930] WARNING: at kernel/power/suspend_test.c:52 suspend_test_finish+0x7c/0x80()
[ 176.763932] Hardware name:
[ 176.763933] Component: resume devices
[ 176.763934] Modules linked in: binfmt_misc kvm_intel kvm snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd psmouse iTCO_wdt iTCO_vendor_support serio_raw e1000e soundcore snd_page_alloc
[ 176.763952] Pid: 4180, comm: bash Not tainted 2.6.31-rc1-25446-g1ae8c0a-dirty #3
[ 176.763953] Call Trace:
[ 176.763958] [<ffffffff8104a8e8>] warn_slowpath_common+0x78/0xb0
[ 176.763961] [<ffffffff8104a97c>] warn_slowpath_fmt+0x3c/0x40
[ 176.763964] [<ffffffff8107ce7c>] suspend_test_finish+0x7c/0x80
[ 176.763966] [<ffffffff8107cac1>] suspend_devices_and_enter+0xb1/0x210
[ 176.763969] [<ffffffff8107cd4a>] enter_state+0x12a/0x150
[ 176.763971] [<ffffffff8107c2a1>] state_store+0x91/0x100
[ 176.763974] [<ffffffff8121b177>] kobj_attr_store+0x17/0x20
[ 176.763978] [<ffffffff8115a250>] sysfs_write_file+0xe0/0x160
[ 176.763981] [<ffffffff810f8468>] vfs_write+0xb8/0x1a0
[ 176.763984] [<ffffffff810f63f8>] ? filp_close+0x58/0x90
[ 176.763987] [<ffffffff810f8f1c>] sys_write+0x4c/0x80
[ 176.763991] [<ffffffff8100b66b>] system_call_fastpath+0x16/0x1b
[ 176.763993] ---[ end trace 50ea4941e30c27fd ]---
[ 176.766367] PM: Finishing wakeup.
[ 176.766369] Restarting tasks ... done.
Hallo Ingo, Richard.
I'm getting "Corrupted low memory" trace with my Intel DG45ID board
after resume. This board has different dmi-bios-vendor... so probably
it will be nice to have it in your patch.
Here is trace after resume:
===============================================
[ 600.816088] Corrupted low memory at ffff880000004200 (4200 phys) =
00420301
[ 600.816093] ------------[ cut here ]------------
[ 600.816100] WARNING: at arch/x86/kernel/check.c:134
check_for_bios_corruption+0xe4/0xf0()
[ 600.816102] Hardware name:
[ 600.816103] Memory corruption detected in low memory
[ 600.816105] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat
binfmt_misc kvm_intel kvm snd_hda_codec_intelhdmi snd_hda_codec_idt
snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm
snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event
snd_seq snd_timer snd_seq_device snd psmouse soundcore e1000e serio_raw
iTCO_wdt iTCO_vendor_support snd_page_alloc
[ 600.816129] Pid: 9, comm: events/0 Tainted: G W
2.6.31-rc1-25446-g1ae8c0a #1
[ 600.816131] Call Trace:
[ 600.816136] [<ffffffff8104a8e8>] warn_slowpath_common+0x78/0xb0
[ 600.816139] [<ffffffff8104a97c>] warn_slowpath_fmt+0x3c/0x40
[ 600.816142] [<ffffffff8102aff4>] check_for_bios_corruption+0xe4/0xf0
[ 600.816145] [<ffffffff8102b000>] ? check_corruption+0x0/0x30
[ 600.816148] [<ffffffff8102b009>] check_corruption+0x9/0x30
[ 600.816152] [<ffffffff8105e4d4>] worker_thread+0x144/0x260
[ 600.816155] [<ffffffff810635c0>] ? autoremove_wake_function+0x0/0x40
[ 600.816158] [<ffffffff8105e390>] ? worker_thread+0x0/0x260
[ 600.816161] [<ffffffff810631e6>] kthread+0x96/0xa0
[ 600.816165] [<ffffffff8100c69a>] child_rip+0xa/0x20
[ 600.816168] [<ffffffff81063150>] ? kthread+0x0/0xa0
[ 600.816171] [<ffffffff8100c690>] ? child_rip+0x0/0x20
[ 600.816173] ---[ end trace 03ff161c20a96dae ]---
=====================================================================
result of "dmidecode -s bios-vendor" is "Intel Corp."
here is patch against latest git. It's working fine with my board.
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index de2cab1..89d00e2 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -672,6 +672,13 @@ static struct dmi_system_id __initdata
bad_bios_dmi_table[] = {
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
},
},
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "Intel BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+ },
+ },
#endif
{}
};
In attachment you can see dmesg before bios patch and after.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc1-25446-g1ae8c0a-dirty (lex@zwerg)
(gcc version 4.4.0 (Ubuntu 4.4.0-8ubuntu2) ) #2 SMP Mon Jul 6 06:30:36
CEST 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz
root=UUID=0db19d83-143f-4a8d-8f62-0775623b62b1 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd90e000 (usable)
[ 0.000000] BIOS-e820: 00000000bd90e000 - 00000000bd930000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd930000 - 00000000bda48000 (reserved)
[ 0.000000] BIOS-e820: 00000000bda48000 - 00000000bda5c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bda5c000 - 00000000bdb5b000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb5b000 - 00000000bdb5c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb5c000 - 00000000bdb64000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdb64000 - 00000000bdb6e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb6e000 - 00000000bdb8c000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb8c000 - 00000000bdb92000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb92000 - 00000000bdd00000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0BDD00000 mask FFFF00000 write-through
[ 0.000000] 2 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13C000000 mask FFC000000 uncachable
[ 0.000000] last_pfn = 0xbdd00 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000
(usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009e800 (usable)
[ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bd90e000 (usable)
[ 0.000000] modified: 00000000bd90e000 - 00000000bd930000 (ACPI NVS)
[ 0.000000] modified: 00000000bd930000 - 00000000bda48000 (reserved)
[ 0.000000] modified: 00000000bda48000 - 00000000bda5c000 (ACPI NVS)
[ 0.000000] modified: 00000000bda5c000 - 00000000bdb5b000 (reserved)
[ 0.000000] modified: 00000000bdb5b000 - 00000000bdb5c000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb5c000 - 00000000bdb64000 (ACPI data)
[ 0.000000] modified: 00000000bdb64000 - 00000000bdb6e000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb6e000 - 00000000bdb8c000 (reserved)
[ 0.000000] modified: 00000000bdb8c000 - 00000000bdb92000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb92000 - 00000000bdd00000 (usable)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bdd00000
[ 0.000000] 0000000000 - 00bdc00000 page 2M
[ 0.000000] 00bdc00000 - 00bdd00000 page 4k
[ 0.000000] kernel direct mapping tables up to bdd00000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000
[ 0.000000] 0100000000 - 013c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 13c000000 @ b000-11000
[ 0.000000] RAMDISK: 37858000 - 37fefbe0
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000bdb62e18 0004C (v01 INTEL DG45ID
0000006B MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000bdb61d98 000F4 (v04 INTEL A M I
06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! 20090521 tbfadt-370
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
BDB65F40/00000000BDB6BE40, using 32 20090521 tbfadt-487
[ 0.000000] ACPI: DSDT 00000000bdb5c018 0492F (v01 INTEL DG45ID
0000006B INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bdb65f40 00040
[ 0.000000] ACPI: APIC 00000000bdb61f18 0006C (v02 INTEL DG45ID
0000006B MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000bdb6cd98 0003C (v01 INTEL DG45ID
0000006B MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000bdb6bc18 000A0 (v32 INTEL DG45ID
0000006B TFSM 000F4240)
[ 0.000000] ACPI: HPET 00000000bdb6cd18 00038 (v01 INTEL DG45ID
0000006B AMI. 00000003)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 013c000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000184ec48] TEXT DATA BSS ==>
[0001000000 - 000184ec48]
[ 0.000000] #3 [0037858000 - 0037fefbe0] RAMDISK ==>
[0037858000 - 0037fefbe0]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==>
[000009e800 - 0000100000]
[ 0.000000] #5 [000184f000 - 000184f1ec] BRK ==>
[000184f000 - 000184f1ec]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==>
[0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==>
[000000b000 - 000000c000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff880028600000-ffff88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd90e
[ 0.000000] 0: 0x000bdb92 -> 0x000bdd00
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1022485
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3833 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 758452 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd90e000 -
00000000bd930000
[ 0.000000] PM: Registered nosave memory: 00000000bd930000 -
00000000bda48000
[ 0.000000] PM: Registered nosave memory: 00000000bda48000 -
00000000bda5c000
[ 0.000000] PM: Registered nosave memory: 00000000bda5c000 -
00000000bdb5b000
[ 0.000000] PM: Registered nosave memory: 00000000bdb5b000 -
00000000bdb5c000
[ 0.000000] PM: Registered nosave memory: 00000000bdb5c000 -
00000000bdb64000
[ 0.000000] PM: Registered nosave memory: 00000000bdb64000 -
00000000bdb6e000
[ 0.000000] PM: Registered nosave memory: 00000000bdb6e000 -
00000000bdb8c000
[ 0.000000] PM: Registered nosave memory: 00000000bdb8c000 -
00000000bdb92000
[ 0.000000] PM: Registered nosave memory: 00000000bdd00000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at bdd00000 (gap:
bdd00000:4101c000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff880028022000, static
data 82464 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1004685
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz
root=UUID=0db19d83-143f-4a8d-8f62-0775623b62b1 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 3942820k/5177344k available (4825k kernel code,
1087404k absent, 146184k reserved, 2464k data, 428k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.684 MHz processor.
[ 0.001002] Console: colour VGA+ 80x25
[ 0.001004] console [tty0] enabled
[ 0.004000] allocated 41943040 bytes of page_cgroup
[ 0.004000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for
per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5999.36 BogoMIPS (lpj=11998736)
[ 0.004000] Security Framework initialized
[ 0.004000] Smack: Initializing.
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] Performance Counters: Core2 events, Intel PMU driver.
[ 0.004000] ... version: 2
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic counters: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 000000007fffffff
[ 0.004000] ... fixed-purpose counters: 3
[ 0.004000] ... counter mask: 0000000700000003
[ 0.004000] ACPI: Core revision 20090521
[ 0.005853] Setting APIC routing to flat
[ 0.006172] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.045868] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping 0a
[ 0.048001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5999.22
BogoMIPS (lpj=11998448)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.132656] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping 0a
[ 0.132663] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.136018] Brought up 2 CPUs
[ 0.136020] Total of 2 processors activated (11998.59 BogoMIPS).
[ 0.136062] CPU0 attaching sched-domain:
[ 0.136064] domain 0: span 0-1 level MC
[ 0.136066] groups: 0 1
[ 0.136069] CPU1 attaching sched-domain:
[ 0.136070] domain 0: span 0-1 level MC
[ 0.136071] groups: 1 0
[ 0.136125] regulator: core version 0.5
[ 0.136125] Time: 4:33:17 Date: 07/06/09
[ 0.136125] NET: Registered protocol family 16
[ 0.136125] ACPI: bus type pci registered
[ 0.136125] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.136125] PCI: Not using MMCONFIG.
[ 0.136125] PCI: Using configuration type 1 for base access
[ 0.136125] bio: create slab <bio-0> at 0
[ 0.136401] ACPI: EC: Look up EC in DSDT
[ 0.142862] ACPI: BIOS _OSI(Linux) query ignored
[ 0.144357] ACPI: Interpreter enabled
[ 0.144359] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.144374] ACPI: Using IOAPIC for interrupt routing
[ 0.144462] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.144513] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.146905] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.149941] ACPI: No dock devices found.
[ 0.149941] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.149941] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
[ 0.149941] pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.149941] pci 0000:00:02.0: reg 20 io port: [0xf1c0-0xf1c7]
[ 0.149941] pci 0000:00:02.1: reg 10 64bit mmio: [0xd0400000-0xd04fffff]
[ 0.149941] pci 0000:00:03.0: reg 10 64bit mmio: [0xd0526100-0xd052610f]
[ 0.149941] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.149941] pci 0000:00:03.0: PME# disabled
[ 0.149941] pci 0000:00:19.0: reg 10 32bit mmio: [0xd0500000-0xd051ffff]
[ 0.149941] pci 0000:00:19.0: reg 14 32bit mmio: [0xd0524000-0xd0524fff]
[ 0.149941] pci 0000:00:19.0: reg 18 io port: [0xf100-0xf11f]
[ 0.149941] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.149941] pci 0000:00:19.0: PME# disabled
[ 0.149941] pci 0000:00:1a.0: reg 20 io port: [0xf0e0-0xf0ff]
[ 0.149941] pci 0000:00:1a.1: reg 20 io port: [0xf0c0-0xf0df]
[ 0.149941] pci 0000:00:1a.2: reg 20 io port: [0xf0a0-0xf0bf]
[ 0.149941] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd0525c00-0xd0525fff]
[ 0.149941] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.149941] pci 0000:00:1a.7: PME# disabled
[ 0.149941] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0520000-0xd0523fff]
[ 0.149941] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.149941] pci 0000:00:1b.0: PME# disabled
[ 0.152033] pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f]
[ 0.152088] pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f]
[ 0.152142] pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f]
[ 0.152200] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0525800-0xd0525bff]
[ 0.152244] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.152248] pci 0000:00:1d.7: PME# disabled
[ 0.152345] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 0.152348] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6
GPIO
[ 0.152351] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0a00 (mask 00ff)
[ 0.152404] pci 0000:00:1f.2: reg 10 io port: [0xf1b0-0xf1b7]
[ 0.152408] pci 0000:00:1f.2: reg 14 io port: [0xf1a0-0xf1a3]
[ 0.152412] pci 0000:00:1f.2: reg 18 io port: [0xf190-0xf197]
[ 0.152417] pci 0000:00:1f.2: reg 1c io port: [0xf180-0xf183]
[ 0.152421] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
[ 0.152425] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0525000-0xd05257ff]
[ 0.152449] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.152451] pci 0000:00:1f.2: PME# disabled
[ 0.152473] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd0526000-0xd05260ff]
[ 0.152483] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[ 0.152518] pci 0000:00:1f.5: reg 10 io port: [0xf170-0xf177]
[ 0.152522] pci 0000:00:1f.5: reg 14 io port: [0xf160-0xf163]
[ 0.152526] pci 0000:00:1f.5: reg 18 io port: [0xf150-0xf157]
[ 0.152531] pci 0000:00:1f.5: reg 1c io port: [0xf140-0xf143]
[ 0.152535] pci 0000:00:1f.5: reg 20 io port: [0xf130-0xf13f]
[ 0.152539] pci 0000:00:1f.5: reg 24 io port: [0xf120-0xf12f]
[ 0.152601] pci 0000:00:1e.0: transparent bridge
[ 0.152613] pci_bus 0000:00: on NUMA node 0
[ 0.152616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.152705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.156178] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.156178] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12
14 15) *0
[ 0.156191] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12
14 15)
[ 0.156260] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12
14 15)
[ 0.156330] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.156399] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.156468] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.156537] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.156570] SCSI subsystem initialized
[ 0.156570] libata version 3.00 loaded.
[ 0.156570] usbcore: registered new interface driver usbfs
[ 0.156570] usbcore: registered new interface driver hub
[ 0.156570] usbcore: registered new device driver usb
[ 0.156570] ACPI: WMI: Mapper loaded
[ 0.156570] PCI: Using ACPI for IRQ routing
[ 0.168037] NET: Registered protocol family 8
[ 0.168039] NET: Registered protocol family 20
[ 0.168052] NetLabel: Initializing
[ 0.168052] NetLabel: domain hash size = 128
[ 0.168052] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.168052] NetLabel: unlabeled traffic allowed by default
[ 0.168052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.168056] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.191969] pnp: PnP ACPI init
[ 0.191977] ACPI: bus type pnp registered
[ 0.193528] pnp: PnP ACPI: found 10 devices
[ 0.193529] ACPI: ACPI bus type pnp unregistered
[ 0.193537] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.193539] system 00:01: iomem range 0xe0000000-0xefffffff has been
reserved
[ 0.193541] system 00:01: iomem range 0xfed08000-0xfed08fff has been
reserved
[ 0.193544] system 00:02: ioport range 0xa20-0xa3f has been reserved
[ 0.193546] system 00:02: ioport range 0xa00-0xa1f has been reserved
[ 0.193548] system 00:02: ioport range 0xb78-0xb7f has been reserved
[ 0.193549] system 00:02: ioport range 0xf78-0xf7f has been reserved
[ 0.193553] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.193557] system 00:08: ioport range 0x400-0x47f has been reserved
[ 0.193558] system 00:08: ioport range 0x1180-0x119f has been reserved
[ 0.193560] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.193562] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.193564] system 00:08: iomem range 0xfec00000-0xfecfffff has been
reserved
[ 0.193566] system 00:08: iomem range 0xfee00000-0xfee0ffff has been
reserved
[ 0.193567] system 00:08: iomem range 0xfed20000-0xfed9ffff has been
reserved
[ 0.193569] system 00:08: iomem range 0xff000000-0xffffffff has been
reserved
[ 0.198319] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.198320] pci 0000:00:1e.0: IO window: disabled
[ 0.198324] pci 0000:00:1e.0: MEM window: disabled
[ 0.198326] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.198335] pci 0000:00:1e.0: setting latency timer to 64
[ 0.198338] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.198339] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.198341] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.198342] pci_bus 0000:01: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.198360] NET: Registered protocol family 2
[ 0.198412] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.198717] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.199854] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.200194] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.200196] TCP reno registered
[ 0.200262] NET: Registered protocol family 1
[ 0.200311] Trying to unpack rootfs image as initramfs...
[ 0.319188] Freeing initrd memory: 7774k freed
[ 0.321742] Machine check injector initialized
[ 0.321807] Scanning for low memory corruption every 60 seconds
[ 0.321964] audit: initializing netlink socket (disabled)
[ 0.321976] type=2000 audit(1246854796.319:1): initialized
[ 0.327781] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.329435] VFS: Disk quotas dquot_6.5.2
[ 0.329490] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.329958] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.330002] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.330036] fuse init (API version 7.11)
[ 0.330134] msgmni has been set to 7717
[ 0.330290] alg: No test for stdrng (krng)
[ 0.330357] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.330359] io scheduler noop registered
[ 0.330360] io scheduler anticipatory registered
[ 0.330362] io scheduler deadline registered
[ 0.330369] io scheduler cfq registered (default)
[ 0.330378] pci 0000:00:02.0: Boot video device
[ 0.500221] Switched to high resolution mode on CPU 1
[ 0.503534] Switched to high resolution mode on CPU 0
[ 1.928005] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.528006] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.528374] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.528376] ACPI: Power Button [PWRF]
[ 3.528430] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.528436] ACPI: Power Button [PWRB]
[ 3.528769] ACPI: SSDT 00000000bdb65c18 002CC (v01 AMI IST
00000001 MSFT 03000001)
[ 3.529030] Marking TSC unstable due to TSC halts in idle
[ 3.529060] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.529090] processor LNXCPU:00: registered as cooling_device0
[ 3.529264] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.529290] processor LNXCPU:01: registered as cooling_device1
[ 3.532213] Linux agpgart interface v0.103
[ 3.532223] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
[ 3.533481] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 3.536071] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 3.536152] [drm] Initialized drm 1.1.0 20060810
[ 3.536166] alloc irq_desc for 16 on node -1
[ 3.536167] alloc kstat_irqs on node -1
[ 3.536173] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.536175] i915 0000:00:02.0: setting latency timer to 64
[ 3.539613] mtrr: type mismatch for c0000000,10000000 old: write-back
new: write-combining
[ 3.539615] [drm] MTRR allocation failed. Graphics performance may
suffer.
[ 3.539626] alloc irq_desc for 24 on node -1
[ 3.539627] alloc kstat_irqs on node -1
[ 3.539632] i915 0000:00:02.0: irq 24 for MSI/MSI-X
[ 3.544798] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B
[ 3.555500] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C
[ 4.241074] [drm] TMDS-12: set mode 1920x1080 1f
[ 4.310987] Console: switching to colour frame buffer device 240x67
[ 4.360889] [drm] fb0: inteldrmfb frame buffer device
[ 4.360939] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD 20090521
video-1851
[ 4.360991] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:15/input/input2
[ 4.360995] ACPI: Video Device [GFX0] (multi-head: no rom: yes
post: no)
[ 4.361027] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 4.362239] brd: module loaded
[ 4.362822] loop: module loaded
[ 4.362942] ahci 0000:00:1f.2: version 3.0
[ 4.362951] alloc irq_desc for 19 on node -1
[ 4.362953] alloc kstat_irqs on node -1
[ 4.362958] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.362977] alloc irq_desc for 25 on node -1
[ 4.362978] alloc kstat_irqs on node -1
[ 4.362983] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
[ 4.363040] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl SATA mode
[ 4.363042] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum
part ems
[ 4.363046] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.400046] scsi0 : ahci
[ 4.400179] scsi1 : ahci
[ 4.400255] scsi2 : ahci
[ 4.400332] scsi3 : ahci
[ 4.400406] scsi4 : ahci
[ 4.400482] scsi5 : ahci
[ 4.400548] ata1: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525100 irq 25
[ 4.400551] ata2: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525180 irq 25
[ 4.400553] ata3: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525200 irq 25
[ 4.400555] ata4: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525280 irq 25
[ 4.400557] ata5: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525300 irq 25
[ 4.400559] ata6: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525380 irq 25
[ 4.400611] ata_piix 0000:00:1f.5: version 2.13
[ 4.400617] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.400620] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.400642] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.400681] scsi6 : ata_piix
[ 4.400770] scsi7 : ata_piix
[ 4.400834] ata7: SATA max UDMA/133 cmd 0xf170 ctl 0xf160 bmdma
0xf130 irq 19
[ 4.400837] ata8: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma
0xf138 irq 19
[ 4.400919] Fixed MDIO Bus: probed
[ 4.401019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.401030] alloc irq_desc for 18 on node -1
[ 4.401031] alloc kstat_irqs on node -1
[ 4.401034] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.401040] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.401042] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.401079] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 4.404971] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.404975] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.404984] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0525c00
[ 4.420010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.420105] usb usb1: configuration #1 chosen from 1 choice
[ 4.420156] hub 1-0:1.0: USB hub found
[ 4.420167] hub 1-0:1.0: 6 ports detected
[ 4.420205] alloc irq_desc for 23 on node -1
[ 4.420206] alloc kstat_irqs on node -1
[ 4.420209] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.420214] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.420217] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.420254] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 4.424136] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.424141] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.424149] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0525800
[ 4.440009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.440085] usb usb2: configuration #1 chosen from 1 choice
[ 4.440133] hub 2-0:1.0: USB hub found
[ 4.440138] hub 2-0:1.0: 6 ports detected
[ 4.440203] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.440254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 4.440258] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.440261] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.440298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 4.440323] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0e0
[ 4.440388] usb usb3: configuration #1 chosen from 1 choice
[ 4.440424] hub 3-0:1.0: USB hub found
[ 4.440429] hub 3-0:1.0: 2 ports detected
[ 4.440456] alloc irq_desc for 21 on node -1
[ 4.440457] alloc kstat_irqs on node -1
[ 4.440460] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 4.440464] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.440466] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.440503] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 4.440528] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0c0
[ 4.440592] usb usb4: configuration #1 chosen from 1 choice
[ 4.440629] hub 4-0:1.0: USB hub found
[ 4.440633] hub 4-0:1.0: 2 ports detected
[ 4.440666] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.440669] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.440672] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.440709] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 4.440729] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f0a0
[ 4.440790] usb usb5: configuration #1 chosen from 1 choice
[ 4.440824] hub 5-0:1.0: USB hub found
[ 4.440828] hub 5-0:1.0: 2 ports detected
[ 4.440856] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.440860] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.440862] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.440898] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 4.440917] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 4.440980] usb usb6: configuration #1 chosen from 1 choice
[ 4.441019] hub 6-0:1.0: USB hub found
[ 4.441023] hub 6-0:1.0: 2 ports detected
[ 4.441051] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.441055] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.441058] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.441095] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 4.441114] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 4.441180] usb usb7: configuration #1 chosen from 1 choice
[ 4.441213] hub 7-0:1.0: USB hub found
[ 4.441217] hub 7-0:1.0: 2 ports detected
[ 4.441245] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.441249] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.441251] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.441286] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 4.441305] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 4.441374] usb usb8: configuration #1 chosen from 1 choice
[ 4.441410] hub 8-0:1.0: USB hub found
[ 4.441414] hub 8-0:1.0: 2 ports detected
[ 4.441522] usbcore: registered new interface driver usbserial
[ 4.441551] USB Serial support registered for generic
[ 4.441579] usbcore: registered new interface driver usbserial_generic
[ 4.441581] usbserial: USB Serial Driver core
[ 4.441696] PNP: No PS/2 controller found. Probing ports directly.
[ 4.441756] Platform driver 'i8042' needs updating - please use
dev_pm_ops
[ 4.446088] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.446092] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.446172] mice: PS/2 mouse device common for all mice
[ 4.446308] rtc_cmos 00:04: RTC can wake from S4
[ 4.446347] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.446368] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 4.446479] device-mapper: uevent: version 1.0.3
[ 4.446566] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: [email protected]
[ 4.446648] device-mapper: multipath: version 1.1.0 loaded
[ 4.446650] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.446955] cpuidle: using governor ladder
[ 4.447323] cpuidle: using governor menu
[ 4.448358] usbcore: registered new interface driver hiddev
[ 4.448397] usbcore: registered new interface driver usbhid
[ 4.448399] usbhid: v2.6:USB HID core driver
[ 4.448596] TCP cubic registered
[ 4.448797] NET: Registered protocol family 10
[ 4.449088] lo: Disabled Privacy Extensions
[ 4.449262] NET: Registered protocol family 17
[ 4.449703] PM: Resume from disk failed.
[ 4.449712] registered taskstats version 1
[ 4.449774] Magic number: 1:905:564
[ 4.449835] rtc_cmos 00:04: setting system clock to 2009-07-06
04:33:21 UTC (1246854801)
[ 4.449837] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.449838] EDD information not available.
[ 4.720097] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.720113] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.720128] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.720142] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.720156] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.720168] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.730878] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.741630] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.741672] ata2.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.06, max UDMA/66
[ 4.741794] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 4.741796] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth
31/32)
[ 4.742627] ata1.00: configured for UDMA/133
[ 4.742697] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L
01.0 PQ: 0 ANSI: 5
[ 4.742864] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 4.742890] sd 0:0:0:0: [sda] Write Protect is off
[ 4.742892] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.742905] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.742981] sda:
[ 4.743065] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.744022] ata2.00: configured for UDMA/66
[ 4.755221] sda1 sda2 sda3 < sda5 sda6 sda7
[ 4.806584] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D
1.06 PQ: 0 ANSI: 5
[ 4.817146] sda8 sda9 sda10 sda11 >
[ 4.867722] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.929948] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 4.929950] Uniform CD-ROM driver Revision: 3.20
[ 4.930058] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.930140] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.930207] Freeing unused kernel memory: 428k freed
[ 4.930292] Write protecting the kernel read-only data: 6888k
[ 5.001004] Clocksource tsc unstable (delta = -134805128 ns)
[ 5.014599] usb 3-1: new low speed USB device using uhci_hcd and
address 2
[ 5.174418] usb 3-1: configuration #1 chosen from 1 choice
[ 5.191564] input: HID 046a:0023 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 5.191617] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11
Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1/input0
[ 5.215426] input: HID 046a:0023 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 5.215479] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11
Device [HID 046a:0023] on usb-0000:00:1a.0-1/input1
[ 5.452023] usb 3-2: new low speed USB device using uhci_hcd and
address 3
[ 5.628404] usb 3-2: configuration #1 chosen from 1 choice
[ 5.643508] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 5.643550] generic-usb 0003:046D:C00E.0003: input,hidraw2: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 6.318161] PM: Starting manual resume from disk
[ 6.318163] PM: Resume from partition 8:10
[ 6.318164] PM: Checking hibernation image.
[ 6.318264] PM: Resume from disk failed.
[ 6.339970] EXT4-fs (dm-0): barriers enabled
[ 6.345742] kjournald2 starting: pid 1478, dev dm-0:8, commit
interval 5 seconds
[ 6.345748] EXT4-fs (dm-0): delayed allocation enabled
[ 6.345750] EXT4-fs: file extents enabled
[ 6.346227] EXT4-fs: mballoc enabled
[ 6.346235] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 7.040082] <6>cp[1526]: segfault at 7ffe3295ae98 ip 00007fb26a7db255
sp 00007ffe3295aea0 error 6 in libattr.so.1.1.0[7fb26a7d9000+4000]
[ 9.517574] udev: starting version 144
[ 10.647823] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 10.647825] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 10.647857] alloc irq_desc for 20 on node -1
[ 10.647858] alloc kstat_irqs on node -1
[ 10.647863] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 10.647870] e1000e 0000:00:19.0: setting latency timer to 64
[ 10.647927] alloc irq_desc for 26 on node -1
[ 10.647928] alloc kstat_irqs on node -1
[ 10.647935] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 10.742376] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:9b:a9:1a
[ 10.742379] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 10.742404] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
[ 10.929800] iTCO_vendor_support: vendor-support=0
[ 11.227001] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 11.227058] iTCO_wdt: Found a ICH10R TCO device (Version=2,
TCOBASE=0x0460)
[ 11.227102] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.984135] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 12.040067] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 12.040434] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.692856] alloc irq_desc for 22 on node -1
[ 12.692859] alloc kstat_irqs on node -1
[ 12.692866] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 12.692897] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.813471] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 13.603090] Adding 8787512k swap on /dev/sda10. Priority:-1
extents:1 across:8787512k
[ 13.617762] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
[ 13.617764] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 13.618121] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.130826] EXT4-fs (dm-0): internal journal on dm-0:8
[ 14.924417] EXT4-fs (sda6): barriers enabled
[ 14.928374] kjournald2 starting: pid 2235, dev sda6:8, commit
interval 5 seconds
[ 14.928544] EXT4-fs (sda6): internal journal on sda6:8
[ 14.928546] EXT4-fs (sda6): delayed allocation enabled
[ 14.928548] EXT4-fs: file extents enabled
[ 14.928587] EXT4-fs: mballoc enabled
[ 14.928596] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 14.948488] EXT4-fs (sda8): barriers enabled
[ 14.967740] kjournald2 starting: pid 2239, dev sda8:8, commit
interval 5 seconds
[ 14.985246] EXT4-fs (sda8): internal journal on sda8:8
[ 14.985249] EXT4-fs (sda8): delayed allocation enabled
[ 14.985250] EXT4-fs: file extents enabled
[ 14.985574] EXT4-fs: mballoc enabled
[ 14.985584] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 15.010409] EXT4-fs (sda9): barriers enabled
[ 15.024453] kjournald2 starting: pid 2242, dev sda9:8, commit
interval 5 seconds
[ 15.024619] EXT4-fs (sda9): internal journal on sda9:8
[ 15.024621] EXT4-fs (sda9): delayed allocation enabled
[ 15.024623] EXT4-fs: file extents enabled
[ 15.027011] EXT4-fs: mballoc enabled
[ 15.027018] EXT4-fs (sda9): mounted filesystem with ordered data mode
[ 15.039131] 0000:00:19.0: eth0: changing MTU from 1500 to 1492
[ 15.297297] <6>mv[2409]: segfault at 7ffee20417f8 ip 00007ff3603d9255
sp 00007ffee2041800 error 6 in libattr.so.1.1.0[7ff3603d7000+4000]
[ 16.700792] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
[ 16.700794] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 22.564560] <6>mv[3524]: segfault at 7ffeadbbd758 ip 00007f2b3c2a6255
sp 00007ffeadbbd760 error 6 in libattr.so.1.1.0[7f2b3c2a4000+4000]
[ 24.389015] eth0: no IPv6 routers present
[ 91.633074] PM: Syncing filesystems ... done.
[ 91.977060] PM: Preparing system for mem sleep
[ 92.184416] Freezing user space processes ... (elapsed 0.04 seconds)
done.
[ 92.225017] Freezing remaining freezable tasks ... (elapsed 0.00
seconds) done.
[ 92.225041] PM: Entering mem sleep
[ 92.225049] Suspending console(s) (use no_console_suspend to debug)
[ 92.260098] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 92.260233] sd 0:0:0:0: [sda] Stopping disk
[ 92.746445] ata_piix 0000:00:1f.5: PCI INT B disabled
[ 92.872091] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 92.872097] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 92.872103] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 92.872108] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 92.872120] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 92.872152] ACPI handle has no context!
[ 92.888081] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 92.888086] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 92.888092] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 92.888097] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 92.946364] e1000e 0000:00:19.0: PCI INT A disabled
[ 92.946370] e1000e 0000:00:19.0: PME# enabled
[ 92.946376] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 92.985759] [drm:gm45_get_vblank_counter] *ERROR* trying to get
vblank count for disabled pipe 1
[ 92.985764] render error detected, EIR: 0x00000010
[ 92.985765] page table error
[ 92.985766] PGTBL_ER: 0x00100000
[ 92.985767] [drm:i915_driver_irq_handler] *ERROR* EIR stuck:
0x00000010, masking
[ 93.000097] PM: suspend devices took 0.776 seconds
[ 93.000217] ehci_hcd 0000:00:1d.7: PME# disabled
[ 93.016118] ehci_hcd 0000:00:1a.7: PME# disabled
[ 93.032959] ACPI: Preparing to enter system sleep state S3
[ 93.034172] Disabling non-boot CPUs ...
[ 93.036298] kvm: disabling virtualization on CPU1
[ 93.036320] CPU 1 is now offline
[ 93.036322] SMP alternatives: switching to UP code
[ 93.042149] CPU0 attaching NULL sched-domain.
[ 93.042152] CPU1 attaching NULL sched-domain.
[ 93.042157] CPU0 attaching NULL sched-domain.
[ 93.042297] CPU1 is down
[ 93.042686] Extended CMOS year: 2000
[ 93.042686] Back to C!
[ 93.042686] CPU0: Thermal LVT vector (0xfa) already installed
[ 93.042686] Extended CMOS year: 2000
[ 93.042686] Enabling non-boot CPUs ...
[ 93.042686] SMP alternatives: switching to SMP code
[ 93.046664] Booting processor 1 APIC 0x1 ip 0x6000
[ 93.042047] Initializing CPU#1
[ 93.042047] Calibrating delay using timer specific routine.. 6002.35
BogoMIPS (lpj=12004716)
[ 93.042047] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 93.042047] CPU: L2 cache: 6144K
[ 93.042047] CPU: Physical Processor ID: 0
[ 93.042047] CPU: Processor Core ID: 1
[ 93.042047] mce: CPU supports 6 MCE banks
[ 93.042047] CPU1: Thermal monitoring enabled (TM2)
[ 93.136738] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping 0a
[ 93.136745] kvm: enabling virtualization on CPU1
[ 93.136794] CPU0 attaching NULL sched-domain.
[ 93.137011] Switched to high resolution mode on CPU 1
[ 93.152011] CPU0 attaching sched-domain:
[ 93.152013] domain 0: span 0-1 level MC
[ 93.152014] groups: 0 1
[ 93.152017] CPU1 attaching sched-domain:
[ 93.152018] domain 0: span 0-1 level MC
[ 93.152019] groups: 1 0
[ 93.153008] CPU1 is up
[ 93.153010] ACPI: Waking up from system sleep state S3
[ 93.153671] i915 0000:00:02.0: restoring config space at offset 0xf
(was 0x100, writing 0x10b)
[ 93.153675] i915 0000:00:02.0: restoring config space at offset 0x8
(was 0x1, writing 0xf1c1)
[ 93.153678] i915 0000:00:02.0: restoring config space at offset 0x6
(was 0xc, writing 0xc000000c)
[ 93.153680] i915 0000:00:02.0: restoring config space at offset 0x4
(was 0x4, writing 0xd0000004)
[ 93.153683] i915 0000:00:02.0: restoring config space at offset 0x1
(was 0x900000, writing 0x900407)
[ 93.153697] pci 0000:00:02.1: restoring config space at offset 0x4
(was 0x4, writing 0xd0400004)
[ 93.153700] pci 0000:00:02.1: restoring config space at offset 0x1
(was 0x900000, writing 0x900007)
[ 93.153713] pci 0000:00:03.0: restoring config space at offset 0xf
(was 0x1f2, writing 0x10b)
[ 93.153730] pci 0000:00:03.0: restoring config space at offset 0x5
(was 0x18f2, writing 0x0)
[ 93.153733] pci 0000:00:03.0: restoring config space at offset 0x4
(was 0xfed10004, writing 0xd0526104)
[ 93.153757] e1000e 0000:00:19.0: restoring config space at offset 0xf
(was 0x100, writing 0x10a)
[ 93.153765] e1000e 0000:00:19.0: restoring config space at offset 0x6
(was 0x1, writing 0xf101)
[ 93.153769] e1000e 0000:00:19.0: restoring config space at offset 0x5
(was 0x0, writing 0xd0524000)
[ 93.153772] e1000e 0000:00:19.0: restoring config space at offset 0x4
(was 0x0, writing 0xd0500000)
[ 93.153777] e1000e 0000:00:19.0: restoring config space at offset 0x1
(was 0x100000, writing 0x100007)
[ 93.153791] uhci_hcd 0000:00:1a.0: restoring config space at offset
0xf (was 0x100, writing 0x10b)
[ 93.153799] uhci_hcd 0000:00:1a.0: restoring config space at offset
0x8 (was 0x1, writing 0xf0e1)
[ 93.153807] uhci_hcd 0000:00:1a.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 93.153819] uhci_hcd 0000:00:1a.1: restoring config space at offset
0xf (was 0x200, writing 0x203)
[ 93.153827] uhci_hcd 0000:00:1a.1: restoring config space at offset
0x8 (was 0x1, writing 0xf0c1)
[ 93.153835] uhci_hcd 0000:00:1a.1: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 93.153846] uhci_hcd 0000:00:1a.2: restoring config space at offset
0xf (was 0x300, writing 0x304)
[ 93.153855] uhci_hcd 0000:00:1a.2: restoring config space at offset
0x8 (was 0x1, writing 0xf0a1)
[ 93.153863] uhci_hcd 0000:00:1a.2: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 93.153879] ehci_hcd 0000:00:1a.7: restoring config space at offset
0xf (was 0x300, writing 0x304)
[ 93.153892] ehci_hcd 0000:00:1a.7: restoring config space at offset
0x4 (was 0x0, writing 0xd0525c00)
[ 93.153897] ehci_hcd 0000:00:1a.7: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900002)
[ 93.153910] ehci_hcd 0000:00:1a.7: PME# disabled
[ 93.153920] HDA Intel 0000:00:1b.0: restoring config space at offset
0xf (was 0x100, writing 0x10b)
[ 93.153931] HDA Intel 0000:00:1b.0: restoring config space at offset
0x3 (was 0x0, writing 0x10)
[ 93.153935] HDA Intel 0000:00:1b.0: restoring config space at offset
0x1 (was 0x100006, writing 0x100002)
[ 93.153949] uhci_hcd 0000:00:1d.0: restoring config space at offset
0xf (was 0x100, writing 0x10a)
[ 93.153957] uhci_hcd 0000:00:1d.0: restoring config space at offset
0x8 (was 0x1, writing 0xf081)
[ 93.153965] uhci_hcd 0000:00:1d.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 93.153977] uhci_hcd 0000:00:1d.1: restoring config space at offset
0xf (was 0x200, writing 0x203)
[ 93.153985] uhci_hcd 0000:00:1d.1: restoring config space at offset
0x8 (was 0x1, writing 0xf061)
[ 93.153993] uhci_hcd 0000:00:1d.1: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 93.154004] uhci_hcd 0000:00:1d.2: restoring config space at offset
0xf (was 0x300, writing 0x304)
[ 93.154012] uhci_hcd 0000:00:1d.2: restoring config space at offset
0x8 (was 0x1, writing 0xf041)
[ 93.154020] uhci_hcd 0000:00:1d.2: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 93.154036] ehci_hcd 0000:00:1d.7: restoring config space at offset
0xf (was 0x100, writing 0x10a)
[ 93.154049] ehci_hcd 0000:00:1d.7: restoring config space at offset
0x4 (was 0x0, writing 0xd0525800)
[ 93.154054] ehci_hcd 0000:00:1d.7: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900002)
[ 93.154067] ehci_hcd 0000:00:1d.7: PME# disabled
[ 93.154077] pci 0000:00:1e.0: restoring config space at offset 0x9
(was 0x10001, writing 0x1fff1)
[ 93.154080] pci 0000:00:1e.0: restoring config space at offset 0x8
(was 0x0, writing 0xfff0)
[ 93.154084] pci 0000:00:1e.0: restoring config space at offset 0x6
(was 0x0, writing 0x20010100)
[ 93.154089] pci 0000:00:1e.0: restoring config space at offset 0x1
(was 0x100005, writing 0x100007)
[ 93.154140] ahci 0000:00:1f.2: restoring config space at offset 0x1
(was 0x2b00007, writing 0x2b00407)
[ 93.154159] pci 0000:00:1f.3: restoring config space at offset 0xf
(was 0x300, writing 0x304)
[ 93.154166] pci 0000:00:1f.3: restoring config space at offset 0x8
(was 0x1181, writing 0xf001)
[ 93.154172] pci 0000:00:1f.3: restoring config space at offset 0x4
(was 0x4, writing 0xd0526004)
[ 93.154176] pci 0000:00:1f.3: restoring config space at offset 0x1
(was 0x2800001, writing 0x2800003)
[ 93.156812] i915 0000:00:02.0: setting latency timer to 64
[ 93.218092] [drm] TMDS-12: set mode 1920x1080 1f
[ 93.218134] pci 0000:00:02.1: PME# disabled
[ 93.218138] pci 0000:00:03.0: PME# disabled
[ 93.218176] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 93.218178] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting
failed 0xfffffffb
[ 93.218181] e1000e 0000:00:19.0: setting latency timer to 64
[ 93.218185] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 93.218187] e1000e 0000:00:19.0: PME# disabled
[ 93.218189] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 93.218191] e1000e 0000:00:19.0: PME# disabled
[ 93.218214] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 93.276195] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 93.276200] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 93.276220] usb usb3: root hub lost power or was reset
[ 93.276246] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 93.276251] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 93.276269] usb usb4: root hub lost power or was reset
[ 93.276285] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 93.276290] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 93.276308] usb usb5: root hub lost power or was reset
[ 93.276324] ehci_hcd 0000:00:1a.7: PME# disabled
[ 93.276328] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 93.276333] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 93.276371] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 93.276375] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 93.276393] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 93.276397] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 93.276416] usb usb6: root hub lost power or was reset
[ 93.276433] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 93.276439] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 93.276459] usb usb7: root hub lost power or was reset
[ 93.276474] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 93.276479] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 93.276497] usb usb8: root hub lost power or was reset
[ 93.276514] ehci_hcd 0000:00:1d.7: PME# disabled
[ 93.276517] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 93.276522] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 93.276531] pci 0000:00:1e.0: setting latency timer to 64
[ 93.276577] ahci 0000:00:1f.2: setting latency timer to 64
[ 93.276696] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 93.276700] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 93.596029] ata6: SATA link down (SStatus 0 SControl 300)
[ 93.606872] ata7: SATA link down (SStatus 0 SControl 300)
[ 93.617724] ata8: SATA link down (SStatus 0 SControl 300)
[ 93.617745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 93.617764] ata4: SATA link down (SStatus 0 SControl 300)
[ 93.618564] sd 0:0:0:0: [sda] Starting disk
[ 93.621862] ata2.00: configured for UDMA/66
[ 93.628032] ata5: SATA link down (SStatus 0 SControl 300)
[ 93.640029] ata3: SATA link down (SStatus 0 SControl 300)
[ 93.652691] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 93.652693] ata2: irq_stat 0x40000001
[ 93.656810] ata2.00: configured for UDMA/66
[ 93.656812] ata2: EH complete
[ 94.905851] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
[ 94.905853] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 98.644076] ata1: link is slow to respond, please be patient (ready=0)
[ 101.220085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 101.242949] ata1.00: configured for UDMA/133
[ 101.242956] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 101.242958] ata1: irq_stat 0x00400040, connection status changed
[ 101.244474] ata1.00: configured for UDMA/133
[ 101.244476] ata1: EH complete
[ 101.504084] usb 3-1: reset low speed USB device using uhci_hcd and
address 2
[ 102.076087] usb 3-2: reset low speed USB device using uhci_hcd and
address 3
[ 102.382920] PM: resume devices took 9.228 seconds
[ 102.382921] ------------[ cut here ]------------
[ 102.382927] WARNING: at kernel/power/suspend_test.c:52
suspend_test_finish+0x7c/0x80()
[ 102.382929] Hardware name:
[ 102.382930] Component: resume devices
[ 102.382931] Modules linked in: binfmt_misc kvm_intel kvm
snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec
snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi
snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse
snd serio_raw iTCO_wdt iTCO_vendor_support soundcore snd_page_alloc e1000e
[ 102.382949] Pid: 4199, comm: bash Not tainted
2.6.31-rc1-25446-g1ae8c0a-dirty #2
[ 102.382951] Call Trace:
[ 102.382956] [<ffffffff8104a8e8>] warn_slowpath_common+0x78/0xb0
[ 102.382959] [<ffffffff8104a97c>] warn_slowpath_fmt+0x3c/0x40
[ 102.382961] [<ffffffff8107ce7c>] suspend_test_finish+0x7c/0x80
[ 102.382964] [<ffffffff8107cac1>] suspend_devices_and_enter+0xb1/0x210
[ 102.382966] [<ffffffff8107cd4a>] enter_state+0x12a/0x150
[ 102.382968] [<ffffffff8107c2a1>] state_store+0x91/0x100
[ 102.382972] [<ffffffff8121b177>] kobj_attr_store+0x17/0x20
[ 102.382975] [<ffffffff8115a250>] sysfs_write_file+0xe0/0x160
[ 102.382979] [<ffffffff810f8468>] vfs_write+0xb8/0x1a0
[ 102.382982] [<ffffffff810f63f8>] ? filp_close+0x58/0x90
[ 102.382985] [<ffffffff810f8f1c>] sys_write+0x4c/0x80
[ 102.382988] [<ffffffff8100b66b>] system_call_fastpath+0x16/0x1b
[ 102.382990] ---[ end trace 11e2979285be7425 ]---
[ 102.385376] PM: Finishing wakeup.
[ 102.385378] Restarting tasks ... done.
[ 120.816090] Corrupted low memory at ffff880000004200 (4200 phys) =
00420301
[ 120.816095] ------------[ cut here ]------------
[ 120.816102] WARNING: at arch/x86/kernel/check.c:134
check_for_bios_corruption+0xe4/0xf0()
[ 120.816104] Hardware name:
[ 120.816106] Memory corruption detected in low memory
[ 120.816107] Modules linked in: binfmt_misc kvm_intel kvm
snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec
snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi
snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse
snd serio_raw iTCO_wdt iTCO_vendor_support soundcore snd_page_alloc e1000e
[ 120.816129] Pid: 9, comm: events/0 Tainted: G W
2.6.31-rc1-25446-g1ae8c0a-dirty #2
[ 120.816131] Call Trace:
[ 120.816136] [<ffffffff8104a8e8>] warn_slowpath_common+0x78/0xb0
[ 120.816139] [<ffffffff8104a97c>] warn_slowpath_fmt+0x3c/0x40
[ 120.816142] [<ffffffff8102aff4>] check_for_bios_corruption+0xe4/0xf0
[ 120.816146] [<ffffffff8102b000>] ? check_corruption+0x0/0x30
[ 120.816148] [<ffffffff8102b009>] check_corruption+0x9/0x30
[ 120.816152] [<ffffffff8105e4d4>] worker_thread+0x144/0x260
[ 120.816155] [<ffffffff810635c0>] ? autoremove_wake_function+0x0/0x40
[ 120.816158] [<ffffffff8105e390>] ? worker_thread+0x0/0x260
[ 120.816161] [<ffffffff810631e6>] kthread+0x96/0xa0
[ 120.816165] [<ffffffff8100c69a>] child_rip+0xa/0x20
[ 120.816168] [<ffffffff81063150>] ? kthread+0x0/0xa0
[ 120.816171] [<ffffffff8100c690>] ? child_rip+0x0/0x20
[ 120.816173] ---[ end trace 11e2979285be7426 ]---
[ 283.297458] [drm] TMDS-12: set mode 1920x1080 1f
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc1-25446-g1ae8c0a-dirty (lex@zwerg)
(gcc version 4.4.0 (Ubuntu 4.4.0-8ubuntu2) ) #3 SMP Mon Jul 6 11:44:53
CEST 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz
root=UUID=0db19d83-143f-4a8d-8f62-0775623b62b1 ro quiet splash
memory_corruption_check_size=128k
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd90e000 (usable)
[ 0.000000] BIOS-e820: 00000000bd90e000 - 00000000bd930000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd930000 - 00000000bda48000 (reserved)
[ 0.000000] BIOS-e820: 00000000bda48000 - 00000000bda5c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bda5c000 - 00000000bdb5b000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb5b000 - 00000000bdb5c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb5c000 - 00000000bdb64000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdb64000 - 00000000bdb6e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb6e000 - 00000000bdb8c000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb8c000 - 00000000bdb92000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb92000 - 00000000bdd00000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Intel BIOS detected: BIOS may corrupt low RAM, working
around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0BDD00000 mask FFFF00000 write-through
[ 0.000000] 2 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13C000000 mask FFC000000 uncachable
[ 0.000000] last_pfn = 0xbdd00 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000010000 - 0000000000020000
(usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000020000 (reserved)
[ 0.000000] modified: 0000000000020000 - 000000000009e800 (usable)
[ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bd90e000 (usable)
[ 0.000000] modified: 00000000bd90e000 - 00000000bd930000 (ACPI NVS)
[ 0.000000] modified: 00000000bd930000 - 00000000bda48000 (reserved)
[ 0.000000] modified: 00000000bda48000 - 00000000bda5c000 (ACPI NVS)
[ 0.000000] modified: 00000000bda5c000 - 00000000bdb5b000 (reserved)
[ 0.000000] modified: 00000000bdb5b000 - 00000000bdb5c000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb5c000 - 00000000bdb64000 (ACPI data)
[ 0.000000] modified: 00000000bdb64000 - 00000000bdb6e000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb6e000 - 00000000bdb8c000 (reserved)
[ 0.000000] modified: 00000000bdb8c000 - 00000000bdb92000 (ACPI NVS)
[ 0.000000] modified: 00000000bdb92000 - 00000000bdd00000 (usable)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bdd00000
[ 0.000000] 0000000000 - 00bdc00000 page 2M
[ 0.000000] 00bdc00000 - 00bdd00000 page 4k
[ 0.000000] kernel direct mapping tables up to bdd00000 @ 20000-25000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000
[ 0.000000] 0100000000 - 013c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 13c000000 @ 23000-29000
[ 0.000000] RAMDISK: 37858000 - 37fefbe0
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000bdb62e18 0004C (v01 INTEL DG45ID
0000006B MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000bdb61d98 000F4 (v04 INTEL A M I
06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! 20090521 tbfadt-370
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
BDB65F40/00000000BDB6BE40, using 32 20090521 tbfadt-487
[ 0.000000] ACPI: DSDT 00000000bdb5c018 0492F (v01 INTEL DG45ID
0000006B INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bdb65f40 00040
[ 0.000000] ACPI: APIC 00000000bdb61f18 0006C (v02 INTEL DG45ID
0000006B MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000bdb6cd98 0003C (v01 INTEL DG45ID
0000006B MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000bdb6bc18 000A0 (v32 INTEL DG45ID
0000006B TFSM 000F4240)
[ 0.000000] ACPI: HPET 00000000bdb6cd18 00038 (v01 INTEL DG45ID
0000006B AMI. 00000003)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 013c000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000184ec48] TEXT DATA BSS ==>
[0001000000 - 000184ec48]
[ 0.000000] #3 [0037858000 - 0037fefbe0] RAMDISK ==>
[0037858000 - 0037fefbe0]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==>
[000009e800 - 0000100000]
[ 0.000000] #5 [000184f000 - 000184f1ec] BRK ==>
[000184f000 - 000184f1ec]
[ 0.000000] #6 [0000020000 - 0000023000] PGTABLE ==>
[0000020000 - 0000023000]
[ 0.000000] #7 [0000023000 - 0000024000] PGTABLE ==>
[0000023000 - 0000024000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff880028600000-ffff88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000020 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000020 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd90e
[ 0.000000] 0: 0x000bdb92 -> 0x000bdd00
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1022458
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3806 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 758452 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd90e000 -
00000000bd930000
[ 0.000000] PM: Registered nosave memory: 00000000bd930000 -
00000000bda48000
[ 0.000000] PM: Registered nosave memory: 00000000bda48000 -
00000000bda5c000
[ 0.000000] PM: Registered nosave memory: 00000000bda5c000 -
00000000bdb5b000
[ 0.000000] PM: Registered nosave memory: 00000000bdb5b000 -
00000000bdb5c000
[ 0.000000] PM: Registered nosave memory: 00000000bdb5c000 -
00000000bdb64000
[ 0.000000] PM: Registered nosave memory: 00000000bdb64000 -
00000000bdb6e000
[ 0.000000] PM: Registered nosave memory: 00000000bdb6e000 -
00000000bdb8c000
[ 0.000000] PM: Registered nosave memory: 00000000bdb8c000 -
00000000bdb92000
[ 0.000000] PM: Registered nosave memory: 00000000bdd00000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at bdd00000 (gap:
bdd00000:4101c000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff880028022000, static
data 82464 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1004658
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz
root=UUID=0db19d83-143f-4a8d-8f62-0775623b62b1 ro quiet splash
memory_corruption_check_size=128k
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 3942724k/5177344k available (4825k kernel code,
1087512k absent, 146172k reserved, 2464k data, 428k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.334 MHz processor.
[ 0.000998] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.004000] allocated 41943040 bytes of page_cgroup
[ 0.004000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for
per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6000.66 BogoMIPS (lpj=12001336)
[ 0.004000] Security Framework initialized
[ 0.004000] Smack: Initializing.
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] Performance Counters: Core2 events, Intel PMU driver.
[ 0.004000] ... version: 2
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic counters: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 000000007fffffff
[ 0.004000] ... fixed-purpose counters: 3
[ 0.004000] ... counter mask: 0000000700000003
[ 0.004000] ACPI: Core revision 20090521
[ 0.005815] Setting APIC routing to flat
[ 0.006134] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.045839] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping 0a
[ 0.048001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5999.23
BogoMIPS (lpj=11998465)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.132680] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping 0a
[ 0.132687] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.136019] Brought up 2 CPUs
[ 0.136021] Total of 2 processors activated (11999.90 BogoMIPS).
[ 0.136064] CPU0 attaching sched-domain:
[ 0.136066] domain 0: span 0-1 level MC
[ 0.136067] groups: 0 1
[ 0.136071] CPU1 attaching sched-domain:
[ 0.136072] domain 0: span 0-1 level MC
[ 0.136073] groups: 1 0
[ 0.136127] regulator: core version 0.5
[ 0.136127] Time: 10:10:36 Date: 07/06/09
[ 0.136127] NET: Registered protocol family 16
[ 0.136127] ACPI: bus type pci registered
[ 0.136127] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.136127] PCI: Not using MMCONFIG.
[ 0.136127] PCI: Using configuration type 1 for base access
[ 0.136127] bio: create slab <bio-0> at 0
[ 0.136399] ACPI: EC: Look up EC in DSDT
[ 0.142869] ACPI: BIOS _OSI(Linux) query ignored
[ 0.144360] ACPI: Interpreter enabled
[ 0.144363] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.144377] ACPI: Using IOAPIC for interrupt routing
[ 0.144465] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.144516] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.146752] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.149884] ACPI: No dock devices found.
[ 0.149884] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.149884] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
[ 0.149884] pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.149884] pci 0000:00:02.0: reg 20 io port: [0xf1c0-0xf1c7]
[ 0.149884] pci 0000:00:02.1: reg 10 64bit mmio: [0xd0400000-0xd04fffff]
[ 0.149884] pci 0000:00:03.0: reg 10 64bit mmio: [0xd0526100-0xd052610f]
[ 0.149884] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.149884] pci 0000:00:03.0: PME# disabled
[ 0.149884] pci 0000:00:19.0: reg 10 32bit mmio: [0xd0500000-0xd051ffff]
[ 0.149884] pci 0000:00:19.0: reg 14 32bit mmio: [0xd0524000-0xd0524fff]
[ 0.149884] pci 0000:00:19.0: reg 18 io port: [0xf100-0xf11f]
[ 0.149884] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.149884] pci 0000:00:19.0: PME# disabled
[ 0.149884] pci 0000:00:1a.0: reg 20 io port: [0xf0e0-0xf0ff]
[ 0.149884] pci 0000:00:1a.1: reg 20 io port: [0xf0c0-0xf0df]
[ 0.149884] pci 0000:00:1a.2: reg 20 io port: [0xf0a0-0xf0bf]
[ 0.149884] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd0525c00-0xd0525fff]
[ 0.149884] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.149884] pci 0000:00:1a.7: PME# disabled
[ 0.149884] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0520000-0xd0523fff]
[ 0.149884] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.149884] pci 0000:00:1b.0: PME# disabled
[ 0.149884] pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f]
[ 0.149884] pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f]
[ 0.149884] pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f]
[ 0.149884] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0525800-0xd0525bff]
[ 0.152031] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.152035] pci 0000:00:1d.7: PME# disabled
[ 0.152131] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 0.152134] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6
GPIO
[ 0.152137] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0a00 (mask 00ff)
[ 0.152189] pci 0000:00:1f.2: reg 10 io port: [0xf1b0-0xf1b7]
[ 0.152194] pci 0000:00:1f.2: reg 14 io port: [0xf1a0-0xf1a3]
[ 0.152198] pci 0000:00:1f.2: reg 18 io port: [0xf190-0xf197]
[ 0.152202] pci 0000:00:1f.2: reg 1c io port: [0xf180-0xf183]
[ 0.152207] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
[ 0.152211] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0525000-0xd05257ff]
[ 0.152235] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.152237] pci 0000:00:1f.2: PME# disabled
[ 0.152259] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd0526000-0xd05260ff]
[ 0.152270] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[ 0.152304] pci 0000:00:1f.5: reg 10 io port: [0xf170-0xf177]
[ 0.152308] pci 0000:00:1f.5: reg 14 io port: [0xf160-0xf163]
[ 0.152312] pci 0000:00:1f.5: reg 18 io port: [0xf150-0xf157]
[ 0.152317] pci 0000:00:1f.5: reg 1c io port: [0xf140-0xf143]
[ 0.152321] pci 0000:00:1f.5: reg 20 io port: [0xf130-0xf13f]
[ 0.152325] pci 0000:00:1f.5: reg 24 io port: [0xf120-0xf12f]
[ 0.152387] pci 0000:00:1e.0: transparent bridge
[ 0.152398] pci_bus 0000:00: on NUMA node 0
[ 0.152401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.152490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.156177] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.156177] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12
14 15) *0
[ 0.156191] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12
14 15)
[ 0.156259] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12
14 15)
[ 0.156329] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.156398] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.156466] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.156534] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.156567] SCSI subsystem initialized
[ 0.156567] libata version 3.00 loaded.
[ 0.156567] usbcore: registered new interface driver usbfs
[ 0.156567] usbcore: registered new interface driver hub
[ 0.156567] usbcore: registered new device driver usb
[ 0.156567] ACPI: WMI: Mapper loaded
[ 0.156567] PCI: Using ACPI for IRQ routing
[ 0.176007] NET: Registered protocol family 8
[ 0.176009] NET: Registered protocol family 20
[ 0.176022] NetLabel: Initializing
[ 0.176022] NetLabel: domain hash size = 128
[ 0.176022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.176030] NetLabel: unlabeled traffic allowed by default
[ 0.176052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.176057] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.199966] pnp: PnP ACPI init
[ 0.199974] ACPI: bus type pnp registered
[ 0.201519] pnp: PnP ACPI: found 10 devices
[ 0.201520] ACPI: ACPI bus type pnp unregistered
[ 0.201527] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.201529] system 00:01: iomem range 0xe0000000-0xefffffff has been
reserved
[ 0.201531] system 00:01: iomem range 0xfed08000-0xfed08fff has been
reserved
[ 0.201534] system 00:02: ioport range 0xa20-0xa3f has been reserved
[ 0.201536] system 00:02: ioport range 0xa00-0xa1f has been reserved
[ 0.201537] system 00:02: ioport range 0xb78-0xb7f has been reserved
[ 0.201539] system 00:02: ioport range 0xf78-0xf7f has been reserved
[ 0.201543] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.201546] system 00:08: ioport range 0x400-0x47f has been reserved
[ 0.201548] system 00:08: ioport range 0x1180-0x119f has been reserved
[ 0.201550] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.201552] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.201554] system 00:08: iomem range 0xfec00000-0xfecfffff has been
reserved
[ 0.201556] system 00:08: iomem range 0xfee00000-0xfee0ffff has been
reserved
[ 0.201557] system 00:08: iomem range 0xfed20000-0xfed9ffff has been
reserved
[ 0.201559] system 00:08: iomem range 0xff000000-0xffffffff has been
reserved
[ 0.206306] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.206308] pci 0000:00:1e.0: IO window: disabled
[ 0.206311] pci 0000:00:1e.0: MEM window: disabled
[ 0.206314] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.206322] pci 0000:00:1e.0: setting latency timer to 64
[ 0.206325] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.206326] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.206328] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.206329] pci_bus 0000:01: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.206347] NET: Registered protocol family 2
[ 0.206397] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.206701] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.207830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.208170] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.208172] TCP reno registered
[ 0.208236] NET: Registered protocol family 1
[ 0.208286] Trying to unpack rootfs image as initramfs...
[ 0.327049] Freeing initrd memory: 7774k freed
[ 0.329581] Machine check injector initialized
[ 0.329646] Scanning for low memory corruption every 60 seconds
[ 0.329821] audit: initializing netlink socket (disabled)
[ 0.329833] type=2000 audit(1246875036.327:1): initialized
[ 0.335640] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.337221] VFS: Disk quotas dquot_6.5.2
[ 0.337273] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.337734] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.337777] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.337809] fuse init (API version 7.11)
[ 0.337905] msgmni has been set to 7717
[ 0.338064] alg: No test for stdrng (krng)
[ 0.338129] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.338131] io scheduler noop registered
[ 0.338132] io scheduler anticipatory registered
[ 0.338134] io scheduler deadline registered
[ 0.338141] io scheduler cfq registered (default)
[ 0.338150] pci 0000:00:02.0: Boot video device
[ 0.500200] Switched to high resolution mode on CPU 1
[ 0.503484] Switched to high resolution mode on CPU 0
[ 1.936005] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.536005] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.536378] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.536380] ACPI: Power Button [PWRF]
[ 3.536432] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.536437] ACPI: Power Button [PWRB]
[ 3.536773] ACPI: SSDT 00000000bdb65c18 002CC (v01 AMI IST
00000001 MSFT 03000001)
[ 3.537034] Marking TSC unstable due to TSC halts in idle
[ 3.537065] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.537094] processor LNXCPU:00: registered as cooling_device0
[ 3.537267] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.537293] processor LNXCPU:01: registered as cooling_device1
[ 3.540242] Linux agpgart interface v0.103
[ 3.540252] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
[ 3.541508] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 3.544095] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 3.544172] [drm] Initialized drm 1.1.0 20060810
[ 3.544187] alloc irq_desc for 16 on node -1
[ 3.544188] alloc kstat_irqs on node -1
[ 3.544194] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.544196] i915 0000:00:02.0: setting latency timer to 64
[ 3.547450] mtrr: type mismatch for c0000000,10000000 old: write-back
new: write-combining
[ 3.547452] [drm] MTRR allocation failed. Graphics performance may
suffer.
[ 3.547462] alloc irq_desc for 24 on node -1
[ 3.547463] alloc kstat_irqs on node -1
[ 3.547468] i915 0000:00:02.0: irq 24 for MSI/MSI-X
[ 3.552612] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B
[ 3.563314] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C
[ 4.249192] [drm] TMDS-12: set mode 1920x1080 1f
[ 4.319108] Console: switching to colour frame buffer device 240x67
[ 4.369011] [drm] fb0: inteldrmfb frame buffer device
[ 4.369062] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD 20090521
video-1851
[ 4.369113] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:15/input/input2
[ 4.369117] ACPI: Video Device [GFX0] (multi-head: no rom: yes
post: no)
[ 4.369149] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 4.370359] brd: module loaded
[ 4.370938] loop: module loaded
[ 4.371057] ahci 0000:00:1f.2: version 3.0
[ 4.371066] alloc irq_desc for 19 on node -1
[ 4.371068] alloc kstat_irqs on node -1
[ 4.371073] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.371092] alloc irq_desc for 25 on node -1
[ 4.371093] alloc kstat_irqs on node -1
[ 4.371098] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
[ 4.371156] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl SATA mode
[ 4.371158] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum
part ems
[ 4.371161] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.408045] scsi0 : ahci
[ 4.408179] scsi1 : ahci
[ 4.408254] scsi2 : ahci
[ 4.408332] scsi3 : ahci
[ 4.408405] scsi4 : ahci
[ 4.408477] scsi5 : ahci
[ 4.408546] ata1: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525100 irq 25
[ 4.408549] ata2: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525180 irq 25
[ 4.408551] ata3: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525200 irq 25
[ 4.408553] ata4: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525280 irq 25
[ 4.408555] ata5: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525300 irq 25
[ 4.408557] ata6: SATA max UDMA/133 abar m2048@0xd0525000 port
0xd0525380 irq 25
[ 4.408609] ata_piix 0000:00:1f.5: version 2.13
[ 4.408615] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.408619] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.408642] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.408680] scsi6 : ata_piix
[ 4.408771] scsi7 : ata_piix
[ 4.408834] ata7: SATA max UDMA/133 cmd 0xf170 ctl 0xf160 bmdma
0xf130 irq 19
[ 4.408837] ata8: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma
0xf138 irq 19
[ 4.408921] Fixed MDIO Bus: probed
[ 4.409022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.409033] alloc irq_desc for 18 on node -1
[ 4.409034] alloc kstat_irqs on node -1
[ 4.409037] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.409043] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.409046] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.409082] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 4.412971] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.412976] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.412984] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0525c00
[ 4.428009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.428104] usb usb1: configuration #1 chosen from 1 choice
[ 4.428155] hub 1-0:1.0: USB hub found
[ 4.428166] hub 1-0:1.0: 6 ports detected
[ 4.428204] alloc irq_desc for 23 on node -1
[ 4.428205] alloc kstat_irqs on node -1
[ 4.428208] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.428213] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.428216] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.428254] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 4.432136] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.432140] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.432149] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0525800
[ 4.448009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.448085] usb usb2: configuration #1 chosen from 1 choice
[ 4.448134] hub 2-0:1.0: USB hub found
[ 4.448140] hub 2-0:1.0: 6 ports detected
[ 4.448204] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.448255] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 4.448259] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.448262] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.448299] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 4.448324] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0e0
[ 4.448391] usb usb3: configuration #1 chosen from 1 choice
[ 4.448427] hub 3-0:1.0: USB hub found
[ 4.448431] hub 3-0:1.0: 2 ports detected
[ 4.448458] alloc irq_desc for 21 on node -1
[ 4.448459] alloc kstat_irqs on node -1
[ 4.448462] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 4.448466] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.448468] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.448504] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 4.448530] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0c0
[ 4.448592] usb usb4: configuration #1 chosen from 1 choice
[ 4.448627] hub 4-0:1.0: USB hub found
[ 4.448631] hub 4-0:1.0: 2 ports detected
[ 4.448664] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.448668] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.448670] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.448710] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 4.448729] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f0a0
[ 4.448791] usb usb5: configuration #1 chosen from 1 choice
[ 4.448825] hub 5-0:1.0: USB hub found
[ 4.448829] hub 5-0:1.0: 2 ports detected
[ 4.448856] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.448860] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.448863] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.448900] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 4.448919] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 4.448982] usb usb6: configuration #1 chosen from 1 choice
[ 4.449019] hub 6-0:1.0: USB hub found
[ 4.449023] hub 6-0:1.0: 2 ports detected
[ 4.449052] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.449056] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.449058] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.449095] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 4.449115] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 4.449181] usb usb7: configuration #1 chosen from 1 choice
[ 4.449214] hub 7-0:1.0: USB hub found
[ 4.449218] hub 7-0:1.0: 2 ports detected
[ 4.449246] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.449250] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.449252] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.449287] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 4.449306] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 4.449375] usb usb8: configuration #1 chosen from 1 choice
[ 4.449409] hub 8-0:1.0: USB hub found
[ 4.449412] hub 8-0:1.0: 2 ports detected
[ 4.449521] usbcore: registered new interface driver usbserial
[ 4.449548] USB Serial support registered for generic
[ 4.449579] usbcore: registered new interface driver usbserial_generic
[ 4.449580] usbserial: USB Serial Driver core
[ 4.449694] PNP: No PS/2 controller found. Probing ports directly.
[ 4.449755] Platform driver 'i8042' needs updating - please use
dev_pm_ops
[ 4.454008] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.454011] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.454092] mice: PS/2 mouse device common for all mice
[ 4.454226] rtc_cmos 00:04: RTC can wake from S4
[ 4.454265] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.454287] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 4.454394] device-mapper: uevent: version 1.0.3
[ 4.454483] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: [email protected]
[ 4.454565] device-mapper: multipath: version 1.1.0 loaded
[ 4.454567] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.454875] cpuidle: using governor ladder
[ 4.455239] cpuidle: using governor menu
[ 4.456326] usbcore: registered new interface driver hiddev
[ 4.456367] usbcore: registered new interface driver usbhid
[ 4.456368] usbhid: v2.6:USB HID core driver
[ 4.456565] TCP cubic registered
[ 4.456820] NET: Registered protocol family 10
[ 4.457112] lo: Disabled Privacy Extensions
[ 4.457286] NET: Registered protocol family 17
[ 4.457819] PM: Resume from disk failed.
[ 4.457828] registered taskstats version 1
[ 4.457890] Magic number: 1:132:173
[ 4.457951] rtc_cmos 00:04: setting system clock to 2009-07-06
10:10:41 UTC (1246875041)
[ 4.457953] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.457954] EDD information not available.
[ 4.728095] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.728110] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.728126] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.728140] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.728154] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.728166] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.738871] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.749620] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.749663] ata2.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.06, max UDMA/66
[ 4.749796] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 4.749798] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth
31/32)
[ 4.750618] ata1.00: configured for UDMA/133
[ 4.750687] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L
01.0 PQ: 0 ANSI: 5
[ 4.750854] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 4.750880] sd 0:0:0:0: [sda] Write Protect is off
[ 4.750882] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.750896] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.750972] sda:
[ 4.751056] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.752011] ata2.00: configured for UDMA/66
[ 4.766977] sda1 sda2 sda3 < sda5 sda6 sda7
[ 4.814659] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D
1.06 PQ: 0 ANSI: 5
[ 4.817792] sda8 sda9 sda10 sda11 >
[ 4.868078] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.938023] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 4.938025] Uniform CD-ROM driver Revision: 3.20
[ 4.938132] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.938214] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.938283] Freeing unused kernel memory: 428k freed
[ 4.938367] Write protecting the kernel read-only data: 6888k
[ 4.989020] usb 3-1: new low speed USB device using uhci_hcd and
address 2
[ 5.001013] Clocksource tsc unstable (delta = -139605202 ns)
[ 5.146413] usb 3-1: configuration #1 chosen from 1 choice
[ 5.163604] input: HID 046a:0023 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 5.163667] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11
Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1/input0
[ 5.187426] input: HID 046a:0023 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[ 5.187474] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11
Device [HID 046a:0023] on usb-0000:00:1a.0-1/input1
[ 5.425023] usb 3-2: new low speed USB device using uhci_hcd and
address 3
[ 5.601412] usb 3-2: configuration #1 chosen from 1 choice
[ 5.616516] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 5.616558] generic-usb 0003:046D:C00E.0003: input,hidraw2: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 6.374731] PM: Starting manual resume from disk
[ 6.374733] PM: Resume from partition 8:10
[ 6.374734] PM: Checking hibernation image.
[ 6.374843] PM: Resume from disk failed.
[ 6.396170] EXT4-fs (dm-0): barriers enabled
[ 6.401940] kjournald2 starting: pid 1483, dev dm-0:8, commit
interval 5 seconds
[ 6.401947] EXT4-fs (dm-0): delayed allocation enabled
[ 6.401948] EXT4-fs: file extents enabled
[ 6.402417] EXT4-fs: mballoc enabled
[ 6.402426] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 7.096275] <6>cp[1531]: segfault at 7ffea98a1cb8 ip 00007f02d871a255
sp 00007ffea98a1cc0 error 6 in libattr.so.1.1.0[7f02d8718000+4000]
[ 9.640437] udev: starting version 144
[ 10.669599] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 10.669601] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 10.669635] alloc irq_desc for 20 on node -1
[ 10.669636] alloc kstat_irqs on node -1
[ 10.669641] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 10.669648] e1000e 0000:00:19.0: setting latency timer to 64
[ 10.669705] alloc irq_desc for 26 on node -1
[ 10.669706] alloc kstat_irqs on node -1
[ 10.669713] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 10.734693] iTCO_vendor_support: vendor-support=0
[ 10.759366] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:9b:a9:1a
[ 10.759368] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 10.759393] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
[ 10.778764] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 10.778816] iTCO_wdt: Found a ICH10R TCO device (Version=2,
TCOBASE=0x0460)
[ 10.778861] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.848139] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 11.904062] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 11.904414] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.386264] alloc irq_desc for 22 on node -1
[ 12.386266] alloc kstat_irqs on node -1
[ 12.386272] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 12.386305] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.505521] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 13.477772] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
[ 13.477774] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 13.478101] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.514777] Adding 8787512k swap on /dev/sda10. Priority:-1
extents:1 across:8787512k
[ 14.039413] 0000:00:19.0: eth0: changing MTU from 1500 to 1492
[ 14.040983] EXT4-fs (dm-0): internal journal on dm-0:8
[ 14.947183] EXT4-fs (sda6): barriers enabled
[ 14.947330] kjournald2 starting: pid 2279, dev sda6:8, commit
interval 5 seconds
[ 14.947485] EXT4-fs (sda6): internal journal on sda6:8
[ 14.947488] EXT4-fs (sda6): delayed allocation enabled
[ 14.947489] EXT4-fs: file extents enabled
[ 14.947531] EXT4-fs: mballoc enabled
[ 14.947542] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 14.971356] EXT4-fs (sda8): barriers enabled
[ 14.971526] kjournald2 starting: pid 2280, dev sda8:8, commit
interval 5 seconds
[ 14.971693] EXT4-fs (sda8): internal journal on sda8:8
[ 14.971695] EXT4-fs (sda8): delayed allocation enabled
[ 14.971696] EXT4-fs: file extents enabled
[ 14.972028] EXT4-fs: mballoc enabled
[ 14.972036] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 14.988866] EXT4-fs (sda9): barriers enabled
[ 14.988998] kjournald2 starting: pid 2281, dev sda9:8, commit
interval 5 seconds
[ 14.989154] EXT4-fs (sda9): internal journal on sda9:8
[ 14.989156] EXT4-fs (sda9): delayed allocation enabled
[ 14.989157] EXT4-fs: file extents enabled
[ 14.991530] EXT4-fs: mballoc enabled
[ 14.991536] EXT4-fs (sda9): mounted filesystem with ordered data mode
[ 15.249489] <6>mv[2412]: segfault at 7ffe79da6ac8 ip 00007fae1a1b4255
sp 00007ffe79da6ad0 error 6 in libattr.so.1.1.0[7fae1a1b2000+4000]
[ 15.664774] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
[ 15.664777] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 22.730643] <6>mv[3493]: segfault at 7ffeb758cf28 ip 00007f23349c9255
sp 00007ffeb758cf30 error 6 in libattr.so.1.1.0[7f23349c7000+4000]
[ 23.569007] eth0: no IPv6 routers present
[ 166.235008] PM: Syncing filesystems ... done.
[ 166.439822] PM: Preparing system for mem sleep
[ 166.660026] Freezing user space processes ... (elapsed 0.00 seconds)
done.
[ 166.660595] Freezing remaining freezable tasks ... (elapsed 0.00
seconds) done.
[ 166.660618] PM: Entering mem sleep
[ 166.660626] Suspending console(s) (use no_console_suspend to debug)
[ 166.696098] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 166.696242] sd 0:0:0:0: [sda] Stopping disk
[ 167.175115] ata_piix 0000:00:1f.5: PCI INT B disabled
[ 167.300092] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 167.300098] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 167.300104] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 167.300109] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 167.300122] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 167.300155] ACPI handle has no context!
[ 167.316093] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 167.316099] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 167.316104] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 167.316109] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 167.374363] e1000e 0000:00:19.0: PCI INT A disabled
[ 167.374368] e1000e 0000:00:19.0: PME# enabled
[ 167.374377] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 167.416729] [drm:gm45_get_vblank_counter] *ERROR* trying to get
vblank count for disabled pipe 1
[ 167.416733] render error detected, EIR: 0x00000010
[ 167.416734] page table error
[ 167.416735] PGTBL_ER: 0x00100000
[ 167.416737] [drm:i915_driver_irq_handler] *ERROR* EIR stuck:
0x00000010, masking
[ 167.432106] PM: suspend devices took 0.772 seconds
[ 167.432231] ehci_hcd 0000:00:1d.7: PME# disabled
[ 167.448119] ehci_hcd 0000:00:1a.7: PME# disabled
[ 167.464957] ACPI: Preparing to enter system sleep state S3
[ 167.466165] Disabling non-boot CPUs ...
[ 167.468291] kvm: disabling virtualization on CPU1
[ 167.468318] CPU 1 is now offline
[ 167.468320] SMP alternatives: switching to UP code
[ 167.474172] CPU0 attaching NULL sched-domain.
[ 167.474175] CPU1 attaching NULL sched-domain.
[ 167.474180] CPU0 attaching NULL sched-domain.
[ 167.474319] CPU1 is down
[ 167.474354] Extended CMOS year: 2000
[ 167.474354] Back to C!
[ 167.474354] CPU0: Thermal LVT vector (0xfa) already installed
[ 167.474354] Extended CMOS year: 2000
[ 167.474354] Enabling non-boot CPUs ...
[ 167.474354] SMP alternatives: switching to SMP code
[ 167.478330] Booting processor 1 APIC 0x1 ip 0x6000
[ 167.474062] Initializing CPU#1
[ 167.474062] Calibrating delay using timer specific routine.. 6002.34
BogoMIPS (lpj=12004683)
[ 167.474062] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 167.474062] CPU: L2 cache: 6144K
[ 167.474062] CPU: Physical Processor ID: 0
[ 167.474062] CPU: Processor Core ID: 1
[ 167.474062] mce: CPU supports 6 MCE banks
[ 167.474062] CPU1: Thermal monitoring enabled (TM2)
[ 167.568725] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping 0a
[ 167.568732] kvm: enabling virtualization on CPU1
[ 167.568779] CPU0 attaching NULL sched-domain.
[ 167.569010] Switched to high resolution mode on CPU 1
[ 167.584009] CPU0 attaching sched-domain:
[ 167.584011] domain 0: span 0-1 level MC
[ 167.584012] groups: 0 1
[ 167.584014] CPU1 attaching sched-domain:
[ 167.584015] domain 0: span 0-1 level MC
[ 167.584017] groups: 1 0
[ 167.585008] CPU1 is up
[ 167.585010] ACPI: Waking up from system sleep state S3
[ 167.585671] i915 0000:00:02.0: restoring config space at offset 0xf
(was 0x100, writing 0x10b)
[ 167.585675] i915 0000:00:02.0: restoring config space at offset 0x8
(was 0x1, writing 0xf1c1)
[ 167.585678] i915 0000:00:02.0: restoring config space at offset 0x6
(was 0xc, writing 0xc000000c)
[ 167.585680] i915 0000:00:02.0: restoring config space at offset 0x4
(was 0x4, writing 0xd0000004)
[ 167.585683] i915 0000:00:02.0: restoring config space at offset 0x1
(was 0x900000, writing 0x900407)
[ 167.585697] pci 0000:00:02.1: restoring config space at offset 0x4
(was 0x4, writing 0xd0400004)
[ 167.585700] pci 0000:00:02.1: restoring config space at offset 0x1
(was 0x900000, writing 0x900007)
[ 167.585711] pci 0000:00:03.0: restoring config space at offset 0xf
(was 0x1f2, writing 0x10b)
[ 167.585724] pci 0000:00:03.0: restoring config space at offset 0x5
(was 0x18f2, writing 0x0)
[ 167.585727] pci 0000:00:03.0: restoring config space at offset 0x4
(was 0xfed10004, writing 0xd0526104)
[ 167.585747] e1000e 0000:00:19.0: restoring config space at offset 0xf
(was 0x100, writing 0x10a)
[ 167.585756] e1000e 0000:00:19.0: restoring config space at offset 0x6
(was 0x1, writing 0xf101)
[ 167.585759] e1000e 0000:00:19.0: restoring config space at offset 0x5
(was 0x0, writing 0xd0524000)
[ 167.585762] e1000e 0000:00:19.0: restoring config space at offset 0x4
(was 0x0, writing 0xd0500000)
[ 167.585767] e1000e 0000:00:19.0: restoring config space at offset 0x1
(was 0x100000, writing 0x100007)
[ 167.585781] uhci_hcd 0000:00:1a.0: restoring config space at offset
0xf (was 0x100, writing 0x10b)
[ 167.585789] uhci_hcd 0000:00:1a.0: restoring config space at offset
0x8 (was 0x1, writing 0xf0e1)
[ 167.585797] uhci_hcd 0000:00:1a.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 167.585809] uhci_hcd 0000:00:1a.1: restoring config space at offset
0xf (was 0x200, writing 0x203)
[ 167.585817] uhci_hcd 0000:00:1a.1: restoring config space at offset
0x8 (was 0x1, writing 0xf0c1)
[ 167.585825] uhci_hcd 0000:00:1a.1: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 167.585836] uhci_hcd 0000:00:1a.2: restoring config space at offset
0xf (was 0x300, writing 0x304)
[ 167.585844] uhci_hcd 0000:00:1a.2: restoring config space at offset
0x8 (was 0x1, writing 0xf0a1)
[ 167.585852] uhci_hcd 0000:00:1a.2: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 167.585868] ehci_hcd 0000:00:1a.7: restoring config space at offset
0xf (was 0x300, writing 0x304)
[ 167.585881] ehci_hcd 0000:00:1a.7: restoring config space at offset
0x4 (was 0x0, writing 0xd0525c00)
[ 167.585886] ehci_hcd 0000:00:1a.7: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900002)
[ 167.585899] ehci_hcd 0000:00:1a.7: PME# disabled
[ 167.585910] HDA Intel 0000:00:1b.0: restoring config space at offset
0xf (was 0x100, writing 0x10b)
[ 167.585921] HDA Intel 0000:00:1b.0: restoring config space at offset
0x3 (was 0x0, writing 0x10)
[ 167.585925] HDA Intel 0000:00:1b.0: restoring config space at offset
0x1 (was 0x100006, writing 0x100002)
[ 167.585939] uhci_hcd 0000:00:1d.0: restoring config space at offset
0xf (was 0x100, writing 0x10a)
[ 167.585947] uhci_hcd 0000:00:1d.0: restoring config space at offset
0x8 (was 0x1, writing 0xf081)
[ 167.585955] uhci_hcd 0000:00:1d.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 167.585966] uhci_hcd 0000:00:1d.1: restoring config space at offset
0xf (was 0x200, writing 0x203)
[ 167.585974] uhci_hcd 0000:00:1d.1: restoring config space at offset
0x8 (was 0x1, writing 0xf061)
[ 167.585982] uhci_hcd 0000:00:1d.1: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 167.585993] uhci_hcd 0000:00:1d.2: restoring config space at offset
0xf (was 0x300, writing 0x304)
[ 167.586001] uhci_hcd 0000:00:1d.2: restoring config space at offset
0x8 (was 0x1, writing 0xf041)
[ 167.586009] uhci_hcd 0000:00:1d.2: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900001)
[ 167.586026] ehci_hcd 0000:00:1d.7: restoring config space at offset
0xf (was 0x100, writing 0x10a)
[ 167.586038] ehci_hcd 0000:00:1d.7: restoring config space at offset
0x4 (was 0x0, writing 0xd0525800)
[ 167.586043] ehci_hcd 0000:00:1d.7: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900002)
[ 167.586056] ehci_hcd 0000:00:1d.7: PME# disabled
[ 167.586066] pci 0000:00:1e.0: restoring config space at offset 0x9
(was 0x10001, writing 0x1fff1)
[ 167.586069] pci 0000:00:1e.0: restoring config space at offset 0x8
(was 0x0, writing 0xfff0)
[ 167.586072] pci 0000:00:1e.0: restoring config space at offset 0x6
(was 0x0, writing 0x20010100)
[ 167.586078] pci 0000:00:1e.0: restoring config space at offset 0x1
(was 0x100005, writing 0x100007)
[ 167.586129] ahci 0000:00:1f.2: restoring config space at offset 0x1
(was 0x2b00007, writing 0x2b00407)
[ 167.586147] pci 0000:00:1f.3: restoring config space at offset 0xf
(was 0x300, writing 0x304)
[ 167.586155] pci 0000:00:1f.3: restoring config space at offset 0x8
(was 0x1181, writing 0xf001)
[ 167.586160] pci 0000:00:1f.3: restoring config space at offset 0x4
(was 0x4, writing 0xd0526004)
[ 167.586165] pci 0000:00:1f.3: restoring config space at offset 0x1
(was 0x2800001, writing 0x2800003)
[ 167.588814] i915 0000:00:02.0: setting latency timer to 64
[ 167.650109] [drm] TMDS-12: set mode 1920x1080 1f
[ 167.650151] pci 0000:00:02.1: PME# disabled
[ 167.650154] pci 0000:00:03.0: PME# disabled
[ 167.650191] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 167.650193] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting
failed 0xfffffffb
[ 167.650196] e1000e 0000:00:19.0: setting latency timer to 64
[ 167.650200] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 167.650202] e1000e 0000:00:19.0: PME# disabled
[ 167.650204] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 167.650206] e1000e 0000:00:19.0: PME# disabled
[ 167.650230] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 167.708191] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 167.708196] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 167.708216] usb usb3: root hub lost power or was reset
[ 167.708242] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 167.708247] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 167.708265] usb usb4: root hub lost power or was reset
[ 167.708281] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 167.708286] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 167.708305] usb usb5: root hub lost power or was reset
[ 167.708321] ehci_hcd 0000:00:1a.7: PME# disabled
[ 167.708324] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 167.708329] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 167.708367] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 167.708371] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 167.708389] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 167.708393] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 167.708412] usb usb6: root hub lost power or was reset
[ 167.708430] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 167.708436] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 167.708457] usb usb7: root hub lost power or was reset
[ 167.708472] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 167.708477] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 167.708495] usb usb8: root hub lost power or was reset
[ 167.708511] ehci_hcd 0000:00:1d.7: PME# disabled
[ 167.708515] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 167.708520] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 167.708529] pci 0000:00:1e.0: setting latency timer to 64
[ 167.708575] ahci 0000:00:1f.2: setting latency timer to 64
[ 167.708695] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 167.708699] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 168.028029] ata6: SATA link down (SStatus 0 SControl 300)
[ 168.038866] ata8: SATA link down (SStatus 0 SControl 300)
[ 168.049718] ata7: SATA link down (SStatus 0 SControl 300)
[ 168.049736] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 168.049754] ata5: SATA link down (SStatus 0 SControl 300)
[ 168.050554] sd 0:0:0:0: [sda] Starting disk
[ 168.053856] ata2.00: configured for UDMA/66
[ 168.060030] ata4: SATA link down (SStatus 0 SControl 300)
[ 168.072028] ata3: SATA link down (SStatus 0 SControl 300)
[ 168.084741] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 168.084743] ata2: irq_stat 0x40000001
[ 168.088857] ata2.00: configured for UDMA/66
[ 168.088859] ata2: EH complete
[ 169.357849] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
[ 169.357851] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 173.076075] ata1: link is slow to respond, please be patient (ready=0)
[ 175.596083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 175.626681] ata1.00: configured for UDMA/133
[ 175.626689] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 175.626691] ata1: irq_stat 0x00400040, connection status changed
[ 175.628227] ata1.00: configured for UDMA/133
[ 175.628229] ata1: EH complete
[ 175.888086] usb 3-1: reset low speed USB device using uhci_hcd and
address 2
[ 176.460078] usb 3-2: reset low speed USB device using uhci_hcd and
address 3
[ 176.763922] PM: resume devices took 9.176 seconds
[ 176.763924] ------------[ cut here ]------------
[ 176.763930] WARNING: at kernel/power/suspend_test.c:52
suspend_test_finish+0x7c/0x80()
[ 176.763932] Hardware name:
[ 176.763933] Component: resume devices
[ 176.763934] Modules linked in: binfmt_misc kvm_intel kvm
snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec
snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi
snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd
psmouse iTCO_wdt iTCO_vendor_support serio_raw e1000e soundcore
snd_page_alloc
[ 176.763952] Pid: 4180, comm: bash Not tainted
2.6.31-rc1-25446-g1ae8c0a-dirty #3
[ 176.763953] Call Trace:
[ 176.763958] [<ffffffff8104a8e8>] warn_slowpath_common+0x78/0xb0
[ 176.763961] [<ffffffff8104a97c>] warn_slowpath_fmt+0x3c/0x40
[ 176.763964] [<ffffffff8107ce7c>] suspend_test_finish+0x7c/0x80
[ 176.763966] [<ffffffff8107cac1>] suspend_devices_and_enter+0xb1/0x210
[ 176.763969] [<ffffffff8107cd4a>] enter_state+0x12a/0x150
[ 176.763971] [<ffffffff8107c2a1>] state_store+0x91/0x100
[ 176.763974] [<ffffffff8121b177>] kobj_attr_store+0x17/0x20
[ 176.763978] [<ffffffff8115a250>] sysfs_write_file+0xe0/0x160
[ 176.763981] [<ffffffff810f8468>] vfs_write+0xb8/0x1a0
[ 176.763984] [<ffffffff810f63f8>] ? filp_close+0x58/0x90
[ 176.763987] [<ffffffff810f8f1c>] sys_write+0x4c/0x80
[ 176.763991] [<ffffffff8100b66b>] system_call_fastpath+0x16/0x1b
[ 176.763993] ---[ end trace 50ea4941e30c27fd ]---
[ 176.766367] PM: Finishing wakeup.
[ 176.766369] Restarting tasks ... done.
On Mon, Jul 06, 2009 at 06:24:47PM +0200, Alexey Fisher wrote:
> Hallo Ingo, Richard.
>
> I'm getting "Corrupted low memory" trace with my Intel DG45ID board
> after resume. This board has different dmi-bios-vendor... so probably
> it will be nice to have it in your patch.
I'm beginning to think that we should be doing this on all hardware,
perhaps with a kernel option to disable it for embedded devices that
really need that 64K. The low-memory corruption issue seems to be very
widespread.
--
Matthew Garrett | [email protected]
* Matthew Garrett <[email protected]> wrote:
> On Mon, Jul 06, 2009 at 06:24:47PM +0200, Alexey Fisher wrote:
> > Hallo Ingo, Richard.
> >
> > I'm getting "Corrupted low memory" trace with my Intel DG45ID
> > board after resume. This board has different dmi-bios-vendor...
> > so probably it will be nice to have it in your patch.
>
> I'm beginning to think that we should be doing this on all
> hardware, perhaps with a kernel option to disable it for embedded
> devices that really need that 64K. The low-memory corruption issue
> seems to be very widespread.
The problem is that the BIOS corrupted memory that it also marked as
'usable' in its E820 map it gave to the kernel. If that memory is
not usable, it should not have been marked as such. Also, some of
the reports showed corruption beyond this range so the workaround is
not universal.
So i'd really like to know what is happening there, instead of just
zapping support for 64K of RAM on the majority of Linux systems.
We might end up doing the same thing in the end (i.e. disable that
64k of RAM) - but it should be an informed decision, not a wild stab
in the dark.
Ingo
On Wed 2009-07-08 12:39:49, Matthew Garrett wrote:
> On Mon, Jul 06, 2009 at 06:24:47PM +0200, Alexey Fisher wrote:
> > Hallo Ingo, Richard.
> >
> > I'm getting "Corrupted low memory" trace with my Intel DG45ID board
> > after resume. This board has different dmi-bios-vendor... so probably
> > it will be nice to have it in your patch.
>
> I'm beginning to think that we should be doing this on all hardware,
> perhaps with a kernel option to disable it for embedded devices that
> really need that 64K. The low-memory corruption issue seems to be very
> widespread.
Well, maybe it would be better to make suspen/resume part of firmware
testing kit or something... and push intel to fix their bios.
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Ingo Molnar schrieb:
> * Matthew Garrett <[email protected]> wrote:
>
>> On Mon, Jul 06, 2009 at 06:24:47PM +0200, Alexey Fisher wrote:
>>> Hallo Ingo, Richard.
>>>
>>> I'm getting "Corrupted low memory" trace with my Intel DG45ID
>>> board after resume. This board has different dmi-bios-vendor...
>>> so probably it will be nice to have it in your patch.
>> I'm beginning to think that we should be doing this on all
>> hardware, perhaps with a kernel option to disable it for embedded
>> devices that really need that 64K. The low-memory corruption issue
>> seems to be very widespread.
>
> The problem is that the BIOS corrupted memory that it also marked as
> 'usable' in its E820 map it gave to the kernel. If that memory is
> not usable, it should not have been marked as such. Also, some of
> the reports showed corruption beyond this range so the workaround is
> not universal.
>
> So i'd really like to know what is happening there, instead of just
> zapping support for 64K of RAM on the majority of Linux systems.
>
> We might end up doing the same thing in the end (i.e. disable that
> 64k of RAM) - but it should be an informed decision, not a wild stab
> in the dark.
>
> Ingo
If i make memory dump like "dd if=/dev/mem of=memdump.dd bs=64k count=1"
before and after suspend. Will it help you find out whats happening.
On Fri, 10 Jul 2009, Alexey Fisher wrote:
> Ingo Molnar schrieb:
> > * Matthew Garrett <[email protected]> wrote:
> >
> > > On Mon, Jul 06, 2009 at 06:24:47PM +0200, Alexey Fisher wrote:
> > > > Hallo Ingo, Richard.
> > > >
> > > > I'm getting "Corrupted low memory" trace with my Intel DG45ID board
> > > > after resume. This board has different dmi-bios-vendor... so probably it
> > > > will be nice to have it in your patch.
> > > I'm beginning to think that we should be doing this on all hardware,
> > > perhaps with a kernel option to disable it for embedded devices that
> > > really need that 64K. The low-memory corruption issue seems to be very
> > > widespread.
> >
> > The problem is that the BIOS corrupted memory that it also marked as
> > 'usable' in its E820 map it gave to the kernel. If that memory is not
> > usable, it should not have been marked as such. Also, some of the reports
> > showed corruption beyond this range so the workaround is not universal.
> >
> > So i'd really like to know what is happening there, instead of just zapping
> > support for 64K of RAM on the majority of Linux systems.
> >
> > We might end up doing the same thing in the end (i.e. disable that 64k of
> > RAM) - but it should be an informed decision, not a wild stab in the dark.
> >
> > Ingo
>
> If i make memory dump like "dd if=/dev/mem of=memdump.dd bs=64k count=1"
> before and after suspend. Will it help you find out whats happening.
The corrupted low memory printks contain the modifications. Can you
post them please ?
Thanks,
tglx
Thomas Gleixner schrieb:
> On Fri, 10 Jul 2009, Alexey Fisher wrote:
>> Ingo Molnar schrieb:
>>> * Matthew Garrett <[email protected]> wrote:
>>>
>>>> On Mon, Jul 06, 2009 at 06:24:47PM +0200, Alexey Fisher wrote:
>>>>> Hallo Ingo, Richard.
>>>>>
>>>>> I'm getting "Corrupted low memory" trace with my Intel DG45ID board
>>>>> after resume. This board has different dmi-bios-vendor... so probably it
>>>>> will be nice to have it in your patch.
>>>> I'm beginning to think that we should be doing this on all hardware,
>>>> perhaps with a kernel option to disable it for embedded devices that
>>>> really need that 64K. The low-memory corruption issue seems to be very
>>>> widespread.
>>> The problem is that the BIOS corrupted memory that it also marked as
>>> 'usable' in its E820 map it gave to the kernel. If that memory is not
>>> usable, it should not have been marked as such. Also, some of the reports
>>> showed corruption beyond this range so the workaround is not universal.
>>>
>>> So i'd really like to know what is happening there, instead of just zapping
>>> support for 64K of RAM on the majority of Linux systems.
>>>
>>> We might end up doing the same thing in the end (i.e. disable that 64k of
>>> RAM) - but it should be an informed decision, not a wild stab in the dark.
>>>
>>> Ingo
>> If i make memory dump like "dd if=/dev/mem of=memdump.dd bs=64k count=1"
>> before and after suspend. Will it help you find out whats happening.
>
> The corrupted low memory printks contain the modifications. Can you
> post them please ?
>
> Thanks,
>
> tglx
[ 120.816090] Corrupted low memory at ffff880000004200 (4200 phys) =
00420301
[ 120.816095] ------------[ cut here ]------------
[ 120.816102] WARNING: at arch/x86/kernel/check.c:134
check_for_bios_corruption+0xe4/0xf0()
[ 120.816104] Hardware name:
[ 120.816106] Memory corruption detected in low memory
[ 120.816107] Modules linked in: binfmt_misc kvm_intel kvm
snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec
snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi
snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse
snd serio_raw iTCO_wdt iTCO_vendor_support soundcore snd_page_alloc e1000e
[ 120.816129] Pid: 9, comm: events/0 Tainted: G W
2.6.31-rc1-25446-g1ae8c0a-dirty #2
[ 120.816131] Call Trace:
[ 120.816136] [<ffffffff8104a8e8>] warn_slowpath_common+0x78/0xb0
[ 120.816139] [<ffffffff8104a97c>] warn_slowpath_fmt+0x3c/0x40
[ 120.816142] [<ffffffff8102aff4>] check_for_bios_corruption+0xe4/0xf0
[ 120.816146] [<ffffffff8102b000>] ? check_corruption+0x0/0x30
[ 120.816148] [<ffffffff8102b009>] check_corruption+0x9/0x30
[ 120.816152] [<ffffffff8105e4d4>] worker_thread+0x144/0x260
[ 120.816155] [<ffffffff810635c0>] ? autoremove_wake_function+0x0/0x40
[ 120.816158] [<ffffffff8105e390>] ? worker_thread+0x0/0x260
[ 120.816161] [<ffffffff810631e6>] kthread+0x96/0xa0
[ 120.816165] [<ffffffff8100c69a>] child_rip+0xa/0x20
[ 120.816168] [<ffffffff81063150>] ? kthread+0x0/0xa0
[ 120.816171] [<ffffffff8100c690>] ? child_rip+0x0/0x20
[ 120.816173] ---[ end trace 11e2979285be7426 ]---
> --
> To unsubscribe from this list: send the line "unsubscribe kernel-testers" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Thomas Gleixner schrieb:
> On Fri, 10 Jul 2009, Alexey Fisher wrote:
>> Ingo Molnar schrieb:
>>> * Matthew Garrett <[email protected]> wrote:
>>>
>>>> On Mon, Jul 06, 2009 at 06:24:47PM +0200, Alexey Fisher wrote:
>>>>> Hallo Ingo, Richard.
>>>>>
>>>>> I'm getting "Corrupted low memory" trace with my Intel DG45ID board
>>>>> after resume. This board has different dmi-bios-vendor... so probably it
>>>>> will be nice to have it in your patch.
>>>> I'm beginning to think that we should be doing this on all hardware,
>>>> perhaps with a kernel option to disable it for embedded devices that
>>>> really need that 64K. The low-memory corruption issue seems to be very
>>>> widespread.
>>> The problem is that the BIOS corrupted memory that it also marked as
>>> 'usable' in its E820 map it gave to the kernel. If that memory is not
>>> usable, it should not have been marked as such. Also, some of the reports
>>> showed corruption beyond this range so the workaround is not universal.
>>>
>>> So i'd really like to know what is happening there, instead of just zapping
>>> support for 64K of RAM on the majority of Linux systems.
>>>
>>> We might end up doing the same thing in the end (i.e. disable that 64k of
>>> RAM) - but it should be an informed decision, not a wild stab in the dark.
>>>
>>> Ingo
>> If i make memory dump like "dd if=/dev/mem of=memdump.dd bs=64k count=1"
>> before and after suspend. Will it help you find out whats happening.
>
> The corrupted low memory printks contain the modifications. Can you
> post them please ?
>
> Thanks,
>
> tglx
I dumped all between 0000000 - 00ffff0
and there is changes at:
0004200 -> this know one
003c000 - 003fff0 -> this was empty and now it looks like VBIOS
00d18a0 -> i don't know
cat /proc/iomem
00000000-0000ffff : reserved
00010000-0009e7ff : System RAM
0009e800-0009ffff : reserved
000e0000-000fffff : reserved
00100000-bd90dfff : System RAM
01000000-014b1f1b : Kernel code
014b1f1c-0171265f : Kernel data
01794000-01842c07 : Kernel bss
.....
Ingo Molnar wrote:
>
> So i'd really like to know what is happening there, instead of just
> zapping support for 64K of RAM on the majority of Linux systems.
>
> We might end up doing the same thing in the end (i.e. disable that
> 64k of RAM) - but it should be an informed decision, not a wild stab
> in the dark.
>
Speaking as a boot loader author, I can let you know that these kinds of
problems are in no wise limited to suspend/resume.
Pretty much any time you're executing BIOS code you're going to have
*some* platform which has severe memory corruption somewhere. This is
particularly painful for boot loaders, obviously, because the BIOS
corrupts the boot loader as it is running. In most cases, there simply
isn't any way to prevent the corruption, and it's simply dumb luck that
you will boot most of the time.
And no, I don't think EFI is going to magically solve anything. EFI
will just spread the same class of corruption problems over the entire
memory map. It will reduce the density of such bugs -- in particular it
will eliminiate the "right offset, wrong segment" as well as "idiot
coding assembly" class of problems -- but it will not confine the ones
that can and will happen; it's still fundamentally a super-privileged
flat memory space.
The root cause seems to be a lack of verification practices in the BIOS
industry in the post-DOS era. Back when DOS was still a commercially
significant system, the BIOS didn't just support the running OS, it also
directly supported running applications. That put a relatively high bar
on how broken your BIOS could be and still have a viable platform.
These days, it doesn't look like neither the BIOS vendors nor the OEMs
necessarily even know how to QA, and since the BIOS industry is
relatively small and highly consolidated, if there isn't sufficient OEM
pressure it simply won't happen since there is no money in it.
The HDMI case is a good example -- that probably involved SMI being
triggered and the SMI code then clobbering a wild pointer.
-hpa
--
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel. I don't speak on their behalf.
H. Peter Anvin schrieb:
> Ingo Molnar wrote:
>> So i'd really like to know what is happening there, instead of just
>> zapping support for 64K of RAM on the majority of Linux systems.
>>
>> We might end up doing the same thing in the end (i.e. disable that
>> 64k of RAM) - but it should be an informed decision, not a wild stab
>> in the dark.
>>
>
> Speaking as a boot loader author, I can let you know that these kinds of
> problems are in no wise limited to suspend/resume.
>
> Pretty much any time you're executing BIOS code you're going to have
> *some* platform which has severe memory corruption somewhere. This is
> particularly painful for boot loaders, obviously, because the BIOS
> corrupts the boot loader as it is running. In most cases, there simply
> isn't any way to prevent the corruption, and it's simply dumb luck that
> you will boot most of the time.
>
> And no, I don't think EFI is going to magically solve anything. EFI
> will just spread the same class of corruption problems over the entire
> memory map. It will reduce the density of such bugs -- in particular it
> will eliminiate the "right offset, wrong segment" as well as "idiot
> coding assembly" class of problems -- but it will not confine the ones
> that can and will happen; it's still fundamentally a super-privileged
> flat memory space.
>
> The root cause seems to be a lack of verification practices in the BIOS
> industry in the post-DOS era. Back when DOS was still a commercially
> significant system, the BIOS didn't just support the running OS, it also
> directly supported running applications. That put a relatively high bar
> on how broken your BIOS could be and still have a viable platform.
> These days, it doesn't look like neither the BIOS vendors nor the OEMs
> necessarily even know how to QA, and since the BIOS industry is
> relatively small and highly consolidated, if there isn't sufficient OEM
> pressure it simply won't happen since there is no money in it.
>
> The HDMI case is a good example -- that probably involved SMI being
> triggered and the SMI code then clobbering a wild pointer.
>
> -hpa
>
I did a memorydump of Windows Vista SP2 (with win32dd.exe -t 1 -r )
before and after suspend. It has same changes/corruption on
ffff880000004200 like linux do. So this issue is not OS relevant. More
over Windows show some more changes in this area, some of them are
changes in the VBIOS space:
this is diff of the windows dump:
linux has no changes at his place ... it looks like some artifacts from
windows bootmanager.
===================================================================
513,514c513,514
< 0002000: e931 0300 0200 0000 00c0 d0ff 0050 1504 .1...........P..
< 0002010: f498 3980 0000 0000 0000 0000 0000 0000 ..9.............
---
> 0002000: e931 0300 0300 0000 00c0 d0ff 00d0 1404 .1..............
> 0002010: 6c84 d380 0000 0000 0000 0000 0000 0000 l...............
523,526c523,526
< 00020a0: 0000 0000 3000 0000 2000 0000 2000 0000 ....0... ... ...
< 00020b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
< 00020c0: 0000 0000 0000 0000 0000 0000 b004 b381 ................
< 00020d0: 0800 0000 8200 2000 f8ff 928a 1000 0000 ...... .........
---
> 00020a0: 0000 0000 3000 0000 2300 0000 2300 0000 ....0...#...#...
> 00020b0: 0000 0000 4020 b581 e04c 1385 0ca0 a281 ....@ ...L......
> 00020c0: 6820 b581 e04c 1385 84cc 3e80 cdf5 a281 h ...L....>.....
> 00020d0: 0800 0000 8200 0000 58cc 3e80 1000 0000 ........X.>.....
559c559
< 00022e0: 3b00 0080 0000 0000 0020 1200 6006 0000 ;........ ..`...
---
> 00022e0: 3100 0180 bc89 3500 0020 1200 f906 0000 1.....5.. ......
561,562c561,562
< 0002300: 0000 0000 0000 0000 0000 ff03 d0b5 918a ................
< 0002310: 0000 ff07 d0b9 918a 2800 0000 0000 0000 ........(.......
---
> 0002300: f00f ffff 0004 0000 0000 ff03 d085 3d80 ..............=.
> 0002310: 0000 ff07 d089 3d80 2800 0000 0000 0000 ......=.(.......
1057c1057
====================================================================
This issue same on windows and linux
====================================================================
< 0004200: 0000 0000 0000 0000 0000 0000 0000 0000 ................
---
> 0004200: 0104 4200 0000 0000 0000 0000 0000 0000 ..B.............
53286c53286
====================================================================
This is part of VBIOS. On linux this is unchanged and it is located on a
different address space.
====================================================================
< 00d0250: ffff ffff ffff ffff ffff ffff ffff ffff ................
---
> 00d0250: ffff ffff dfff ffff ffff ffff ffff ffff ................
53643c53643
< 00d18a0: ffff ffff ffff ffff ffff ffff ffff ffff ................
---
> 00d18a0: ffff ffff ffff ffff ffdf ffff ffff ffff ................
54271c54271
< 00d3fe0: ffff ffff ffff ffff ffff ffff ffff ffff ................
---
> 00d3fe0: ffff ffff 7fff ffff ffff ffff ffff ffff ................
74497,74510c74497,74510
====================================================================