It has been enough time since introduction of the new timing tables
(commit 809b53c from Dec 12 2007) and the old timing tables are still
available in pata_hpt37x.c (or git history) if somebody needs them.
Cc: Sergei Shtylyov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
drivers/ide/hpt366.c | 63 ---------------------------------------------------
1 file changed, 63 deletions(-)
Index: b/drivers/ide/hpt366.c
===================================================================
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -297,68 +297,6 @@ static u32 twenty_five_base_hpt36x[] = {
/* XFER_PIO_0 */ 0xc0d08585
};
-#if 0
-/* These are the timing tables from the HighPoint open source drivers... */
-static u32 thirty_three_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
- /* XFER_UDMA_5 */ 0x12446231,
- /* XFER_UDMA_4 */ 0x12446231,
- /* XFER_UDMA_3 */ 0x126c6231,
- /* XFER_UDMA_2 */ 0x12486231,
- /* XFER_UDMA_1 */ 0x124c6233,
- /* XFER_UDMA_0 */ 0x12506297,
-
- /* XFER_MW_DMA_2 */ 0x22406c31,
- /* XFER_MW_DMA_1 */ 0x22406c33,
- /* XFER_MW_DMA_0 */ 0x22406c97,
-
- /* XFER_PIO_4 */ 0x06414e31,
- /* XFER_PIO_3 */ 0x06414e42,
- /* XFER_PIO_2 */ 0x06414e53,
- /* XFER_PIO_1 */ 0x06814e93,
- /* XFER_PIO_0 */ 0x06814ea7
-};
-
-static u32 fifty_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12848242,
- /* XFER_UDMA_5 */ 0x12848242,
- /* XFER_UDMA_4 */ 0x12ac8242,
- /* XFER_UDMA_3 */ 0x128c8242,
- /* XFER_UDMA_2 */ 0x120c8242,
- /* XFER_UDMA_1 */ 0x12148254,
- /* XFER_UDMA_0 */ 0x121882ea,
-
- /* XFER_MW_DMA_2 */ 0x22808242,
- /* XFER_MW_DMA_1 */ 0x22808254,
- /* XFER_MW_DMA_0 */ 0x228082ea,
-
- /* XFER_PIO_4 */ 0x0a81f442,
- /* XFER_PIO_3 */ 0x0a81f443,
- /* XFER_PIO_2 */ 0x0a81f454,
- /* XFER_PIO_1 */ 0x0ac1f465,
- /* XFER_PIO_0 */ 0x0ac1f48a
-};
-
-static u32 sixty_six_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x1c869c62,
- /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */
- /* XFER_UDMA_4 */ 0x1c8a9c62,
- /* XFER_UDMA_3 */ 0x1c8e9c62,
- /* XFER_UDMA_2 */ 0x1c929c62,
- /* XFER_UDMA_1 */ 0x1c9a9c62,
- /* XFER_UDMA_0 */ 0x1c829c62,
-
- /* XFER_MW_DMA_2 */ 0x2c829c62,
- /* XFER_MW_DMA_1 */ 0x2c829c66,
- /* XFER_MW_DMA_0 */ 0x2c829d2e,
-
- /* XFER_PIO_4 */ 0x0c829c62,
- /* XFER_PIO_3 */ 0x0c829c84,
- /* XFER_PIO_2 */ 0x0c829ca6,
- /* XFER_PIO_1 */ 0x0d029d26,
- /* XFER_PIO_0 */ 0x0d029d5e
-};
-#else
/*
* The following are the new timing tables with PIO mode data/taskfile transfer
* overclocking fixed...
@@ -424,7 +362,6 @@ static u32 sixty_six_base_hpt37x[] = {
/* XFER_PIO_1 */ 0x0d02ff26,
/* XFER_PIO_0 */ 0x0d42ff7f
};
-#endif
#define HPT366_DEBUG_DRIVE_INFO 0
#define HPT371_ALLOW_ATA133_6 1
From: Bartlomiej Zolnierkiewicz <[email protected]>
Date: Wed, 18 Nov 2009 19:32:07 +0100
> It has been enough time since introduction of the new timing tables
> (commit 809b53c from Dec 12 2007) and the old timing tables are still
> available in pata_hpt37x.c (or git history) if somebody needs them.
>
> Cc: Sergei Shtylyov <[email protected]>
> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Applied to ide-next-2.6, thanks.
On Wed, 18 Nov 2009 19:32:07 +0100
Bartlomiej Zolnierkiewicz <[email protected]> wrote:
> It has been enough time since introduction of the new timing tables
> (commit 809b53c from Dec 12 2007) and the old timing tables are still
> available in pata_hpt37x.c (or git history) if somebody needs them.
(and in the HPT driver...)
Acked-by: Alan Cox <[email protected]>
Hello.
Bartlomiej Zolnierkiewicz wrote:
> It has been enough time since introduction of the new timing tables
> (commit 809b53c from Dec 12 2007) and the old timing tables are still
> available in pata_hpt37x.c (or git history) if somebody needs them.
> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Sergei Shtylyov <[email protected]>
WBR, Sergei