Got this on a Dell e4300 (Core 2 Duo, Inte Pro/Wireless 5300 AGN)
running 2.6.32 final, while doing a suspend-on-lid-close soon after
bootup:
[ 65.455842] ------------[ cut here ]------------
[ 65.460477] WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xd9/0x100 [cfg80211]()
[ 65.468656] Hardware name: Latitude E4300
<9>[ 65.474225] Modules linked in: binfmt_misc rfcomm sco bnep l2cap crc16 snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy arc4 ecb snd_seq_oss snd_seq_midi iwlagn snd_rawmidi iwlcore snd_seq_midi_event snd_seq snd_timer snd_seq_device btusb snd led_class soundcore wmi mac80211 bluetooth ricoh_mmc snd_page_alloc psmouse evdev serio_raw dcdbas cfg80211 usbhid hid i915 drm_kms_helper drm i2c_algo_bit pata_acpi i2c_core intel_agp uhci_hcd[ 65.520656] ---[ end trace ea0633faa6e3e0ca ]---
[ 65.649368] PM: Syncing filesystems ... done.
[ 65.685833] PM: Preparing system for mem sleep
[ 65.947589] [drm] LVDS-8: set mode 1280x800 c
<9>[ 66.011918] Freezing user space processes ... (elapsed 0.00 seconds) <9>[ 66.020637] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 66.028100] PM: Entering mem sleep
I haven't seen this error before, so it may be a regression from .31,
but then I have only had serial console set up for a few weeks.
More serial console below, full dmesg (after a reboot) at
http://web.hexapodia.org/~adi/tmp/e4300-dmesg-2.6.32.txt
* Setting preliminary keymap... * Speech-dispatcher configured for user sessionsps
* Starting Common Unix Printing System: cupsd * PulseAudio configured for per-user sessions
* Enabling additional executable binary formats binfmt-support ...done. battery state...
[ 31.963202] [drm] TV-25: set mode NTSC 480i 0
[ 32.107680] [drm] TV-25: set mode NTSC 480i 0
[ 32.402764] [drm] TV-25: set mode NTSC 480i 0
[ 32.547450] [drm] TV-25: set mode NTSC 480i 0
[ 32.842692] [drm] TV-25: set mode NTSC 480i 0
[ 32.987478] [drm] TV-25: set mode NTSC 480i 0
[ 35.658716] [drm] TV-25: set mode NTSC 480i 0
[ 35.803263] [drm] TV-25: set mode NTSC 480i 0
[ 42.186787] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
[ 42.194885] wlan0: direct probe to AP 00:0b:0e:46:5c:00 (try 1)
[ 42.204706] wlan0: direct probe responded
[ 42.208721] wlan0: authenticate with AP 00:0b:0e:46:5c:00 (try 1)
[ 42.217544] wlan0: authenticated
[ 42.220790] wlan0: associate with AP 00:0b:0e:46:5c:00 (try 1)
[ 42.229554] wlan0: RX AssocResp from 00:0b:0e:46:5c:00 (capab=0x421 status=0 aid=6)
[ 42.237207] wlan0: associated
[ 42.252175] cfg80211: Calling CRDA for country: US
[ 42.258795] cfg80211: Current regulatory domain updated by AP to: US
[ 42.265161] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 42.272401] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 63.151613] [drm] TV-25: set mode NTSC 480i 0
[ 63.606768] [drm] TV-25: set mode NTSC 480i 0
[ 63.919543] [drm] TV-25: set mode NTSC 480i 0
[ 64.103978] [drm] TV-25: set mode NTSC 480i 0
[ 65.381220] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
[ 65.390034] wlan0: direct probe to AP 00:0b:0e:46:5c:00 (try 1)
[ 65.396020] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
[ 65.455842] ------------[ cut here ]------------
[ 65.460477] WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xd9/0x100 [cfg80211]()
[ 65.468656] Hardware name: Latitude E4300
<9>[ 65.474225] Modules linked in: binfmt_misc rfcomm sco bnep l2cap crc16 snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy arc4 ecb snd_seq_oss snd_seq_midi iwlagn snd_rawmidi iwlcore snd_seq_midi_event snd_seq snd_timer snd_seq_device btusb snd led_class soundcore wmi mac80211 bluetooth ricoh_mmc snd_page_alloc psmouse evdev serio_raw dcdbas cfg80211 usbhid hid i915 drm_kms_helper drm i2c_algo_bit pata_acpi i2c_core intel_agp uhci_hcd[ 65.520656] ---[ end trace ea0633faa6e3e0ca ]---
[ 65.649368] PM: Syncing filesystems ... done.
[ 65.685833] PM: Preparing system for mem sleep
[ 65.947589] [drm] LVDS-8: set mode 1280x800 c
<9>[ 66.011918] Freezing user space processes ... (elapsed 0.00 seconds) <9>[ 66.020637] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 66.028100] PM: Entering mem sleep
-andy
2009/12/5 Andy Isaacson <[email protected]>:
> Got this on a Dell e4300 (Core 2 Duo, Inte Pro/Wireless 5300 AGN)
> running 2.6.32 final, while doing a suspend-on-lid-close soon after
> bootup:
>
> [ 65.455842] ------------[ cut here ]------------
> [ 65.460477] WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xd9/0x100 [cfg80211]()
> [ 65.468656] Hardware name: Latitude E4300
> <9>[ 65.474225] Modules linked in: binfmt_misc rfcomm sco bnep l2cap crc16 snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy arc4 ecb snd_seq_oss snd_seq_midi iwlagn snd_rawmidi iwlcore snd_seq_midi_event snd_seq snd_timer snd_seq_device btusb snd led_class soundcore wmi mac80211 bluetooth ricoh_mmc snd_page_alloc psmouse evdev serio_raw dcdbas cfg80211 usbhid hid i915 drm_kms_helper drm i2c_algo_bit pata_acpi i2c_core intel_agp uhci_hcd[ 65.520656] ---[ end trace ea0633faa6e3e0ca ]---
> [ 65.649368] PM: Syncing filesystems ... done.
> [ 65.685833] PM: Preparing system for mem sleep
> [ 65.947589] [drm] LVDS-8: set mode 1280x800 c
> <9>[ 66.011918] Freezing user space processes ... (elapsed 0.00 seconds) <9>[ 66.020637] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 66.028100] PM: Entering mem sleep
>
> I haven't seen this error before, so it may be a regression from .31,
> but then I have only had serial console set up for a few weeks.
>
> More serial console below, full dmesg (after a reboot) at
> http://web.hexapodia.org/~adi/tmp/e4300-dmesg-2.6.32.txt
>
> * Setting preliminary keymap... * Speech-dispatcher configured for user sessionsps
> * Starting Common Unix Printing System: cupsd * PulseAudio configured for per-user sessions
> * Enabling additional executable binary formats binfmt-support ...done. battery state...
> [ 31.963202] [drm] TV-25: set mode NTSC 480i 0
> [ 32.107680] [drm] TV-25: set mode NTSC 480i 0
> [ 32.402764] [drm] TV-25: set mode NTSC 480i 0
> [ 32.547450] [drm] TV-25: set mode NTSC 480i 0
> [ 32.842692] [drm] TV-25: set mode NTSC 480i 0
> [ 32.987478] [drm] TV-25: set mode NTSC 480i 0
> [ 35.658716] [drm] TV-25: set mode NTSC 480i 0
> [ 35.803263] [drm] TV-25: set mode NTSC 480i 0
> [ 42.186787] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
> [ 42.194885] wlan0: direct probe to AP 00:0b:0e:46:5c:00 (try 1)
> [ 42.204706] wlan0: direct probe responded
> [ 42.208721] wlan0: authenticate with AP 00:0b:0e:46:5c:00 (try 1)
> [ 42.217544] wlan0: authenticated
> [ 42.220790] wlan0: associate with AP 00:0b:0e:46:5c:00 (try 1)
> [ 42.229554] wlan0: RX AssocResp from 00:0b:0e:46:5c:00 (capab=0x421 status=0 aid=6)
> [ 42.237207] wlan0: associated
> [ 42.252175] cfg80211: Calling CRDA for country: US
> [ 42.258795] cfg80211: Current regulatory domain updated by AP to: US
> [ 42.265161] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 42.272401] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
> [ 63.151613] [drm] TV-25: set mode NTSC 480i 0
> [ 63.606768] [drm] TV-25: set mode NTSC 480i 0
> [ 63.919543] [drm] TV-25: set mode NTSC 480i 0
> [ 64.103978] [drm] TV-25: set mode NTSC 480i 0
> [ 65.381220] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
> [ 65.390034] wlan0: direct probe to AP 00:0b:0e:46:5c:00 (try 1)
> [ 65.396020] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
> [ 65.455842] ------------[ cut here ]------------
> [ 65.460477] WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xd9/0x100 [cfg80211]()
> [ 65.468656] Hardware name: Latitude E4300
> <9>[ 65.474225] Modules linked in: binfmt_misc rfcomm sco bnep l2cap crc16 snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy arc4 ecb snd_seq_oss snd_seq_midi iwlagn snd_rawmidi iwlcore snd_seq_midi_event snd_seq snd_timer snd_seq_device btusb snd led_class soundcore wmi mac80211 bluetooth ricoh_mmc snd_page_alloc psmouse evdev serio_raw dcdbas cfg80211 usbhid hid i915 drm_kms_helper drm i2c_algo_bit pata_acpi i2c_core intel_agp uhci_hcd[ 65.520656] ---[ end trace ea0633faa6e3e0ca ]---
> [ 65.649368] PM: Syncing filesystems ... done.
> [ 65.685833] PM: Preparing system for mem sleep
> [ 65.947589] [drm] LVDS-8: set mode 1280x800 c
> <9>[ 66.011918] Freezing user space processes ... (elapsed 0.00 seconds) <9>[ 66.020637] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 66.028100] PM: Entering mem sleep
>
I've also got this message - with different hw - Lenovo T61 - iwl3945, C2D, 64bit, 4GB
iwl3945 0000:03:00.0: Error: Response NULL in 'REPLY_ADD_STA'
------------[ cut here ]------------
WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xf1/0x120 [cfg80211]()
Hardware name: 6464CTO
Modules linked in: dvb_usb_dib0700 dib7000p dib7000m dib0070 dvb_usb dib3000mc dib8000 dibx000_common dvb_core aes_generic usblp tun nfsd lockd nfs_acl auth_rpcgss exportfs hidp ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc rfcomm sco l2cap sunrpc autofs4 ipv6 binfmt_misc dm_mirror dm_region_hash dm_log kvm_intel kvm i915 drm_kms_helper drm i2c_algo_bit uinput arc4 ecb cryptomgr crypto_hash usbhid hid btusb bluetooth snd_hda_codec_analog aead pcompress crypto_blkcipher crypto_algapi snd_hda_intel iwl3945 snd_hda_codec iwlcore mac80211 snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss thinkpad_acpi sdhci_pci sdhci snd_mixer_oss snd_pcm cfg80211 mmc_core sr_mod iTCO_wdt psmouse i2c_i801 i2c_core ac snd_timer nvram rfkill rtc_cmos rtc_core rtc_lib iTCO_vendor_support battery snd ehci_hcd e1000e led_class cdrom soundcore snd_page_alloc evdev s
erio_raw uhci_hcd usbcore dm_multipath video backlight output button dm_mod [last unloaded: microcode]
Pid: 28586, comm: events/1 Tainted: G W 2.6.32-00001-g7635708 #42
Call Trace:
[<ffffffff8105334b>] warn_slowpath_common+0x7b/0xc0
[<ffffffff810533a4>] warn_slowpath_null+0x14/0x20
[<ffffffffa01500c1>] wdev_cleanup_work+0xf1/0x120 [cfg80211]
[<ffffffffa014ffd0>] ? wdev_cleanup_work+0x0/0x120 [cfg80211]
[<ffffffff8107462a>] worker_thread+0x21a/0x400
[<ffffffff810745d9>] ? worker_thread+0x1c9/0x400
[<ffffffff8107a3d0>] ? autoremove_wake_function+0x0/0x40
[<ffffffff81074410>] ? worker_thread+0x0/0x400
[<ffffffff8107a046>] kthread+0x96/0xa0
[<ffffffff8100d21a>] child_rip+0xa/0x20
[<ffffffff81042fb4>] ? finish_task_switch+0x74/0xf0
[<ffffffff814259bb>] ? _spin_unlock_irq+0x3b/0x60
[<ffffffff8100cb80>] ? restore_args+0x0/0x30
[<ffffffff81079fb0>] ? kthread+0x0/0xa0
[<ffffffff8100d210>] ? child_rip+0x0/0x20
---[ end trace 2a88b94a3eb21e98 ]---
(elapsed 0.03 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
sd 0:0:0:0: [sda] Synchronizing SCSI cache
Zdenek
On Tue, 2009-12-15 at 22:23 +0800, [email protected] wrote:
>
> 2009/12/5 Andy Isaacson <[email protected]>:
> > Got this on a Dell e4300 (Core 2 Duo, Inte Pro/Wireless 5300 AGN)
> > running 2.6.32 final, while doing a suspend-on-lid-close soon after
> > bootup:
> >
> > [ 65.455842] ------------[ cut here ]------------
> > [ 65.460477] WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xd9/0x100 [cfg80211]()
> > [ 65.468656] Hardware name: Latitude E4300
> > <9>[ 65.474225] Modules linked in: binfmt_misc rfcomm sco bnep l2cap crc16 snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy arc4 ecb snd_seq_oss snd_seq_midi iwlagn snd_rawmidi iwlcore snd_seq_midi_event snd_seq snd_timer snd_seq_device btusb snd led_class soundcore wmi mac80211 bluetooth ricoh_mmc snd_page_alloc psmouse evdev serio_raw dcdbas cfg80211 usbhid hid i915 drm_kms_helper drm i2c_algo_bit pata_acpi i2c_core intel_agp uhci_hcd[ 65.520656] ---[ end trace ea0633faa6e3e0ca ]---
> > [ 65.649368] PM: Syncing filesystems ... done.
> > [ 65.685833] PM: Preparing system for mem sleep
> > [ 65.947589] [drm] LVDS-8: set mode 1280x800 c
> > <9>[ 66.011918] Freezing user space processes ... (elapsed 0.00 seconds) <9>[ 66.020637] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 66.028100] PM: Entering mem sleep
> >
> > I haven't seen this error before, so it may be a regression from .31,
> > but then I have only had serial console set up for a few weeks.
> >
> > More serial console below, full dmesg (after a reboot) at
> > http://web.hexapodia.org/~adi/tmp/e4300-dmesg-2.6.32.txt
> >
> > * Setting preliminary keymap... * Speech-dispatcher configured for user sessionsps
> > * Starting Common Unix Printing System: cupsd * PulseAudio configured for per-user sessions
> > * Enabling additional executable binary formats binfmt-support ...done. battery state...
> > [ 31.963202] [drm] TV-25: set mode NTSC 480i 0
> > [ 32.107680] [drm] TV-25: set mode NTSC 480i 0
> > [ 32.402764] [drm] TV-25: set mode NTSC 480i 0
> > [ 32.547450] [drm] TV-25: set mode NTSC 480i 0
> > [ 32.842692] [drm] TV-25: set mode NTSC 480i 0
> > [ 32.987478] [drm] TV-25: set mode NTSC 480i 0
> > [ 35.658716] [drm] TV-25: set mode NTSC 480i 0
> > [ 35.803263] [drm] TV-25: set mode NTSC 480i 0
> > [ 42.186787] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
> > [ 42.194885] wlan0: direct probe to AP 00:0b:0e:46:5c:00 (try 1)
> > [ 42.204706] wlan0: direct probe responded
> > [ 42.208721] wlan0: authenticate with AP 00:0b:0e:46:5c:00 (try 1)
> > [ 42.217544] wlan0: authenticated
> > [ 42.220790] wlan0: associate with AP 00:0b:0e:46:5c:00 (try 1)
> > [ 42.229554] wlan0: RX AssocResp from 00:0b:0e:46:5c:00 (capab=0x421 status=0 aid=6)
> > [ 42.237207] wlan0: associated
> > [ 42.252175] cfg80211: Calling CRDA for country: US
> > [ 42.258795] cfg80211: Current regulatory domain updated by AP to: US
> > [ 42.265161] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> > [ 42.272401] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
> > [ 63.151613] [drm] TV-25: set mode NTSC 480i 0
> > [ 63.606768] [drm] TV-25: set mode NTSC 480i 0
> > [ 63.919543] [drm] TV-25: set mode NTSC 480i 0
> > [ 64.103978] [drm] TV-25: set mode NTSC 480i 0
> > [ 65.381220] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
> > [ 65.390034] wlan0: direct probe to AP 00:0b:0e:46:5c:00 (try 1)
> > [ 65.396020] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
> > [ 65.455842] ------------[ cut here ]------------
> > [ 65.460477] WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xd9/0x100 [cfg80211]()
> > [ 65.468656] Hardware name: Latitude E4300
> > <9>[ 65.474225] Modules linked in: binfmt_misc rfcomm sco bnep l2cap crc16 snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy arc4 ecb snd_seq_oss snd_seq_midi iwlagn snd_rawmidi iwlcore snd_seq_midi_event snd_seq snd_timer snd_seq_device btusb snd led_class soundcore wmi mac80211 bluetooth ricoh_mmc snd_page_alloc psmouse evdev serio_raw dcdbas cfg80211 usbhid hid i915 drm_kms_helper drm i2c_algo_bit pata_acpi i2c_core intel_agp uhci_hcd[ 65.520656] ---[ end trace ea0633faa6e3e0ca ]---
> > [ 65.649368] PM: Syncing filesystems ... done.
> > [ 65.685833] PM: Preparing system for mem sleep
> > [ 65.947589] [drm] LVDS-8: set mode 1280x800 c
> > <9>[ 66.011918] Freezing user space processes ... (elapsed 0.00 seconds) <9>[ 66.020637] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 66.028100] PM: Entering mem sleep
> >
>
>
> I've also got this message - with different hw - Lenovo T61 - iwl3945, C2D, 64bit, 4GB
>
> iwl3945 0000:03:00.0: Error: Response NULL in 'REPLY_ADD_STA'
> ------------[ cut here ]------------
> WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xf1/0x120 [cfg80211]()
> Hardware name: 6464CTO
> Modules linked in: dvb_usb_dib0700 dib7000p dib7000m dib0070 dvb_usb dib3000mc dib8000 dibx000_common dvb_core aes_generic usblp tun nfsd lockd nfs_acl auth_rpcgss exportfs hidp ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc rfcomm sco l2cap sunrpc autofs4 ipv6 binfmt_misc dm_mirror dm_region_hash dm_log kvm_intel kvm i915 drm_kms_helper drm i2c_algo_bit uinput arc4 ecb cryptomgr crypto_hash usbhid hid btusb bluetooth snd_hda_codec_analog aead pcompress crypto_blkcipher crypto_algapi snd_hda_intel iwl3945 snd_hda_codec iwlcore mac80211 snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss thinkpad_acpi sdhci_pci sdhci snd_mixer_oss snd_pcm cfg80211 mmc_core sr_mod iTCO_wdt psmouse i2c_i801 i2c_core ac snd_timer nvram rfkill rtc_cmos rtc_core rtc_lib iTCO_vendor_support battery snd ehci_hcd e1000e led_class cdrom soundcore snd_page_alloc evdev s
> erio_raw uhci_hcd usbcore dm_multipath video backlight output button dm_mod [last unloaded: microcode]
> Pid: 28586, comm: events/1 Tainted: G W 2.6.32-00001-g7635708 #42
> Call Trace:
> [<ffffffff8105334b>] warn_slowpath_common+0x7b/0xc0
> [<ffffffff810533a4>] warn_slowpath_null+0x14/0x20
> [<ffffffffa01500c1>] wdev_cleanup_work+0xf1/0x120 [cfg80211]
> [<ffffffffa014ffd0>] ? wdev_cleanup_work+0x0/0x120 [cfg80211]
> [<ffffffff8107462a>] worker_thread+0x21a/0x400
> [<ffffffff810745d9>] ? worker_thread+0x1c9/0x400
> [<ffffffff8107a3d0>] ? autoremove_wake_function+0x0/0x40
> [<ffffffff81074410>] ? worker_thread+0x0/0x400
> [<ffffffff8107a046>] kthread+0x96/0xa0
> [<ffffffff8100d21a>] child_rip+0xa/0x20
> [<ffffffff81042fb4>] ? finish_task_switch+0x74/0xf0
> [<ffffffff814259bb>] ? _spin_unlock_irq+0x3b/0x60
> [<ffffffff8100cb80>] ? restore_args+0x0/0x30
> [<ffffffff81079fb0>] ? kthread+0x0/0xa0
> [<ffffffff8100d210>] ? child_rip+0x0/0x20
> ---[ end trace 2a88b94a3eb21e98 ]---
> (elapsed 0.03 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> sd 0:0:0:0: [sda] Synchronizing SCSI cache
This patch [1] from Johannes should fix the problem. Unfortunately it's
not included in .32. John has already sent it to stable@.
1.
http://git.kernel.org/?p=linux/kernel/git/linville/wireless-2.6.git;a=commit;h=6d3560d4fc9c5b9fe1a07a63926ea70512c69c32
Thanks,
-yi
Zhu Yi wrote:
> On Tue, 2009-12-15 at 22:23 +0800, [email protected] wrote:
>
>> 2009/12/5 Andy Isaacson <[email protected]>:
>>
>>> Got this on a Dell e4300 (Core 2 Duo, Inte Pro/Wireless 5300 AGN)
>>> running 2.6.32 final, while doing a suspend-on-lid-close soon after
>>> bootup:
>>>
>>> [ 65.455842] ------------[ cut here ]------------
>>> [ 65.460477] WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xd9/0x100 [cfg80211]()
>>> [ 65.468656] Hardware name: Latitude E4300
>>> <9>[ 65.474225] Modules linked in: binfmt_misc rfcomm sco bnep l2cap crc16 snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy arc4 ecb snd_seq_oss snd_seq_midi iwlagn snd_rawmidi iwlcore snd_seq_midi_event snd_seq snd_timer snd_seq_device btusb snd led_class soundcore wmi mac80211 bluetooth ricoh_mmc snd_page_alloc psmouse evdev serio_raw dcdbas cfg80211 usbhid hid i915 drm_kms_helper drm i2c_algo_bit pata_acpi i2c_core intel_agp uhci_hcd[ 65.520656] ---[ end trace ea0633faa6e3e0ca ]---
>>> [ 65.649368] PM: Syncing filesystems ... done.
>>> [ 65.685833] PM: Preparing system for mem sleep
>>> [ 65.947589] [drm] LVDS-8: set mode 1280x800 c
>>> <9>[ 66.011918] Freezing user space processes ... (elapsed 0.00 seconds) <9>[ 66.020637] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 66.028100] PM: Entering mem sleep
>>>
>>> I haven't seen this error before, so it may be a regression from .31,
>>> but then I have only had serial console set up for a few weeks.
>>>
>>> More serial console below, full dmesg (after a reboot) at
>>> http://web.hexapodia.org/~adi/tmp/e4300-dmesg-2.6.32.txt
>>>
>>> * Setting preliminary keymap... * Speech-dispatcher configured for user sessionsps
>>> * Starting Common Unix Printing System: cupsd * PulseAudio configured for per-user sessions
>>> * Enabling additional executable binary formats binfmt-support ...done. battery state...
>>> [ 31.963202] [drm] TV-25: set mode NTSC 480i 0
>>> [ 32.107680] [drm] TV-25: set mode NTSC 480i 0
>>> [ 32.402764] [drm] TV-25: set mode NTSC 480i 0
>>> [ 32.547450] [drm] TV-25: set mode NTSC 480i 0
>>> [ 32.842692] [drm] TV-25: set mode NTSC 480i 0
>>> [ 32.987478] [drm] TV-25: set mode NTSC 480i 0
>>> [ 35.658716] [drm] TV-25: set mode NTSC 480i 0
>>> [ 35.803263] [drm] TV-25: set mode NTSC 480i 0
>>> [ 42.186787] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
>>> [ 42.194885] wlan0: direct probe to AP 00:0b:0e:46:5c:00 (try 1)
>>> [ 42.204706] wlan0: direct probe responded
>>> [ 42.208721] wlan0: authenticate with AP 00:0b:0e:46:5c:00 (try 1)
>>> [ 42.217544] wlan0: authenticated
>>> [ 42.220790] wlan0: associate with AP 00:0b:0e:46:5c:00 (try 1)
>>> [ 42.229554] wlan0: RX AssocResp from 00:0b:0e:46:5c:00 (capab=0x421 status=0 aid=6)
>>> [ 42.237207] wlan0: associated
>>> [ 42.252175] cfg80211: Calling CRDA for country: US
>>> [ 42.258795] cfg80211: Current regulatory domain updated by AP to: US
>>> [ 42.265161] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>>> [ 42.272401] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>>> [ 63.151613] [drm] TV-25: set mode NTSC 480i 0
>>> [ 63.606768] [drm] TV-25: set mode NTSC 480i 0
>>> [ 63.919543] [drm] TV-25: set mode NTSC 480i 0
>>> [ 64.103978] [drm] TV-25: set mode NTSC 480i 0
>>> [ 65.381220] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
>>> [ 65.390034] wlan0: direct probe to AP 00:0b:0e:46:5c:00 (try 1)
>>> [ 65.396020] wlan0: deauthenticating from 00:0b:0e:46:5c:00 by local choice (reason=3)
>>> [ 65.455842] ------------[ cut here ]------------
>>> [ 65.460477] WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xd9/0x100 [cfg80211]()
>>> [ 65.468656] Hardware name: Latitude E4300
>>> <9>[ 65.474225] Modules linked in: binfmt_misc rfcomm sco bnep l2cap crc16 snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy arc4 ecb snd_seq_oss snd_seq_midi iwlagn snd_rawmidi iwlcore snd_seq_midi_event snd_seq snd_timer snd_seq_device btusb snd led_class soundcore wmi mac80211 bluetooth ricoh_mmc snd_page_alloc psmouse evdev serio_raw dcdbas cfg80211 usbhid hid i915 drm_kms_helper drm i2c_algo_bit pata_acpi i2c_core intel_agp uhci_hcd[ 65.520656] ---[ end trace ea0633faa6e3e0ca ]---
>>> [ 65.649368] PM: Syncing filesystems ... done.
>>> [ 65.685833] PM: Preparing system for mem sleep
>>> [ 65.947589] [drm] LVDS-8: set mode 1280x800 c
>>> <9>[ 66.011918] Freezing user space processes ... (elapsed 0.00 seconds) <9>[ 66.020637] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.[ 66.028100] PM: Entering mem sleep
>>>
>>>
>> I've also got this message - with different hw - Lenovo T61 - iwl3945, C2D, 64bit, 4GB
>>
>> iwl3945 0000:03:00.0: Error: Response NULL in 'REPLY_ADD_STA'
>> ------------[ cut here ]------------
>> WARNING: at net/wireless/core.c:614 wdev_cleanup_work+0xf1/0x120 [cfg80211]()
>> Hardware name: 6464CTO
>> Modules linked in: dvb_usb_dib0700 dib7000p dib7000m dib0070 dvb_usb dib3000mc dib8000 dibx000_common dvb_core aes_generic usblp tun nfsd lockd nfs_acl auth_rpcgss exportfs hidp ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc rfcomm sco l2cap sunrpc autofs4 ipv6 binfmt_misc dm_mirror dm_region_hash dm_log kvm_intel kvm i915 drm_kms_helper drm i2c_algo_bit uinput arc4 ecb cryptomgr crypto_hash usbhid hid btusb bluetooth snd_hda_codec_analog aead pcompress crypto_blkcipher crypto_algapi snd_hda_intel iwl3945 snd_hda_codec iwlcore mac80211 snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss thinkpad_acpi sdhci_pci sdhci snd_mixer_oss snd_pcm cfg80211 mmc_core sr_mod iTCO_wdt psmouse i2c_i801 i2c_core ac snd_timer nvram rfkill rtc_cmos rtc_core rtc_lib iTCO_vendor_support battery snd ehci_hcd e1000e led_class cdrom soundcore snd_page_alloc evdev s
>> erio_raw uhci_hcd usbcore dm_multipath video backlight output button dm_mod [last unloaded: microcode]
>> Pid: 28586, comm: events/1 Tainted: G W 2.6.32-00001-g7635708 #42
>> Call Trace:
>> [<ffffffff8105334b>] warn_slowpath_common+0x7b/0xc0
>> [<ffffffff810533a4>] warn_slowpath_null+0x14/0x20
>> [<ffffffffa01500c1>] wdev_cleanup_work+0xf1/0x120 [cfg80211]
>> [<ffffffffa014ffd0>] ? wdev_cleanup_work+0x0/0x120 [cfg80211]
>> [<ffffffff8107462a>] worker_thread+0x21a/0x400
>> [<ffffffff810745d9>] ? worker_thread+0x1c9/0x400
>> [<ffffffff8107a3d0>] ? autoremove_wake_function+0x0/0x40
>> [<ffffffff81074410>] ? worker_thread+0x0/0x400
>> [<ffffffff8107a046>] kthread+0x96/0xa0
>> [<ffffffff8100d21a>] child_rip+0xa/0x20
>> [<ffffffff81042fb4>] ? finish_task_switch+0x74/0xf0
>> [<ffffffff814259bb>] ? _spin_unlock_irq+0x3b/0x60
>> [<ffffffff8100cb80>] ? restore_args+0x0/0x30
>> [<ffffffff81079fb0>] ? kthread+0x0/0xa0
>> [<ffffffff8100d210>] ? child_rip+0x0/0x20
>> ---[ end trace 2a88b94a3eb21e98 ]---
>> (elapsed 0.03 seconds) done.
>> Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>> sd 0:0:0:0: [sda] Synchronizing SCSI cache
>>
>
> This patch [1] from Johannes should fix the problem. Unfortunately it's
> not included in .32. John has already sent it to stable@.
>
> 1.
> http://git.kernel.org/?p=linux/kernel/git/linville/wireless-2.6.git;a=commit;h=6d3560d4fc9c5b9fe1a07a63926ea70512c69c32
>
> Thanks,
> -yi
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
Hi,
I have the same problem as Zdenek.
After reading your mail, I've downloaded the kernel 2.6.32.3 (where this
patch is applied), but the problem still occurs.
I have lenovo t61 thinkpad just like Zdenek, problem occurs while
trying to put the computer in to sleep mode.
[ 1868.397536] ------------[ cut here ]------------
[ 1868.397561] WARNING: at net/wireless/core.c:614
wdev_cleanup_work+0x52/0xd1 [cfg80211]()
[ 1868.397562] Hardware name: 64577XG
[ 1868.397563] Modules linked in: nls_utf8 nls_cp437 vfat fat aes_x86_64
aes_generic nvidia(P) ppdev lp parport bridge stp ip v6 vboxnetflt
vboxnetadp vboxdrv uinput fuse firewire_sbp2 loop snd_hda_codec_analog
snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm
snd _seq_dummy snd_seq_oss snd_seq_midi arc4 snd_rawmidi
snd_seq_midi_event snd_seq ecb snd_timer snd_seq_device pcmcia iwlagn
snd iwlcore soundcore yenta_socket rs rc_nonstatic psmouse pcspkr
serio_raw mac80211 pcmcia_core joydev btusb snd_page_alloc i2c_i801 hso
evdev wmi cfg80211 dm_mod ide_gd_mod sd_mod ata_generic crc_ t10dif
pata_acpi ata_piix ide_pci_generic mmc_block ahci sdhci_pci sdhci
firewire_ohci piix libata firewire_core crc_itu_t video output scsi_mod
ricoh_mmc mmc_c ore ide_core intel_agp e1000e [last unloaded:
scsi_wait_scan]
[ 1868.397606] Pid: 9, comm: events/0 Tainted: P
2.6.32.3-noder7 #1
[ 1868.397608] Call Trace:
[ 1868.397613] [<ffffffffa01334ed>] ? wdev_cleanup_work+0x52/0xd1
[cfg80211]
[ 1868.397617] [<ffffffffa01334ed>] ? wdev_cleanup_work+0x52/0xd1
[cfg80211]
[ 1868.397621] [<ffffffff81043324>] ? warn_slowpath_common+0x77/0xa3
[ 1868.397626] [<ffffffffa01334ed>] ? wdev_cleanup_work+0x52/0xd1
[cfg80211]
[ 1868.397629] [<ffffffff81056953>] ? worker_thread+0x182/0x211
[ 1868.397633] [<ffffffffa013349b>] ? wdev_cleanup_work+0x0/0xd1 [cfg80211]
[ 1868.397636] [<ffffffff81059f84>] ? autoremove_wake_function+0x0/0x2e
[ 1868.397638] [<ffffffff810567d1>] ? worker_thread+0x0/0x211
[ 1868.397641] [<ffffffff81059cc9>] ? kthread+0x79/0x81
[ 1868.397644] [<ffffffff8100c99a>] ? child_rip+0xa/0x20
[ 1868.397646] [<ffffffff81059c50>] ? kthread+0x0/0x81
[ 1868.397648] [<ffffffff8100c990>] ? child_rip+0x0/0x20
[ 1868.397649] ---[ end trace 03acd35e2c2e7960 ]---