This patch adds the 7 inch display for the DEVKIT8000.
Signed-off-by: Thomas Weber <[email protected]>
---
drivers/video/omap2/displays/Kconfig | 8 ++-
drivers/video/omap2/displays/Makefile | 1 +
.../video/omap2/displays/panel-innolux-at070tn83.c | 107 ++++++++++++++++++++
3 files changed, 115 insertions(+), 1 deletions(-)
create mode 100644 drivers/video/omap2/displays/panel-innolux-at070tn83.c
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index b12a59c..ca6b372 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -5,7 +5,7 @@ config PANEL_GENERIC
tristate "Generic Panel"
help
Generic panel driver.
- Used for DVI output for Beagle and OMAP3 SDP.
+ Used for DVI output for Beagle, Devkit8000 and OMAP3 SDP.
config PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel"
@@ -13,6 +13,12 @@ config PANEL_SHARP_LS037V7DW01
help
LCD Panel used in TI's SDP3430 and EVM boards
+config PANEL_INNOLUX_AT070TN83
+ tristate "Innolux AT070TN83 LCD Panel"
+ depends on OMAP2_DSS
+ help
+ LCD Panel used in TimLL's Devkit8000
+
config PANEL_TAAL
tristate "Taal DSI Panel"
depends on OMAP2_DSS_DSI
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index 9556464..087b192 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
+obj-$(CONFIG_PANEL_INNOLUX_AT070TN83) += panel-innolux-at070tn83.o
diff --git a/drivers/video/omap2/displays/panel-innolux-at070tn83.c b/drivers/video/omap2/displays/panel-innolux-at070tn83.c
new file mode 100644
index 0000000..f1d7f69
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-innolux-at070tn83.c
@@ -0,0 +1,107 @@
+/*
+ * LCD panel driver for Innolux AT70TN83
+ *
+ * Copyright (C) 2010 Thomas Weber <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+
+#include <plat/display.h>
+
+static struct omap_video_timings innolux_at_timings = {
+ .x_res = 800,
+ .y_res = 480,
+
+ .pixel_clock = 40000,
+
+ .hsw = 48,
+ .hfp = 1,
+ .hbp = 1,
+
+ .vsw = 3,
+ .vfp = 12,
+ .vbp = 25,
+};
+
+static int innolux_at_panel_probe(struct omap_dss_device *dssdev)
+{
+ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS;
+ dssdev->panel.acb = 0x28;
+ dssdev->panel.timings = innolux_at_timings;
+
+ return 0;
+}
+
+static void innolux_at_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int innolux_at_panel_enable(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void innolux_at_panel_disable(struct omap_dss_device *dssdev)
+{
+
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
+}
+
+static int innolux_at_panel_suspend(struct omap_dss_device *dssdev)
+{
+ innolux_at_panel_disable(dssdev);
+ return 0;
+}
+
+static int innolux_at_panel_resume(struct omap_dss_device *dssdev)
+{
+ return innolux_at_panel_enable(dssdev);
+}
+
+static struct omap_dss_driver innolux_at_driver = {
+ .probe = innolux_at_panel_probe,
+ .remove = innolux_at_panel_remove,
+
+ .enable = innolux_at_panel_enable,
+ .disable = innolux_at_panel_disable,
+ .suspend = innolux_at_panel_suspend,
+ .resume = innolux_at_panel_resume,
+
+ .driver = {
+ .name = "innolux_at_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init innolux_at_panel_drv_init(void)
+{
+ return omap_dss_register_driver(&innolux_at_driver);
+}
+
+static void __exit innolux_at_panel_drv_exit(void)
+{
+ omap_dss_unregister_driver(&innolux_at_driver);
+}
+
+module_init(innolux_at_panel_drv_init);
+module_exit(innolux_at_panel_drv_exit);
+MODULE_LICENSE("GPL");
--
1.6.4.4
> -----Original Message-----
> From: [email protected] [mailto:linux-omap-
> [email protected]] On Behalf Of Thomas Weber
> Sent: Friday, February 12, 2010 1:11 AM
> Cc: Thomas Weber; Tomi Valkeinen; Thomas Weber; linux-
> [email protected]; [email protected]; linux-
> [email protected]
> Subject: [RESEND][PATCHv2 4/4] OMAP: DSS2: Add Innolux 7" display
> for DEVKIT8000
>
> This patch adds the 7 inch display for the DEVKIT8000.
[Hiremath, Vaibhav] Specify panel part/name here, patch description seems less descriptive.
>
> Signed-off-by: Thomas Weber <[email protected]>
> ---
> drivers/video/omap2/displays/Kconfig | 8 ++-
> drivers/video/omap2/displays/Makefile | 1 +
> .../video/omap2/displays/panel-innolux-at070tn83.c | 107
> ++++++++++++++++++++
> 3 files changed, 115 insertions(+), 1 deletions(-)
> create mode 100644 drivers/video/omap2/displays/panel-innolux-
> at070tn83.c
>
> diff --git a/drivers/video/omap2/displays/Kconfig
> b/drivers/video/omap2/displays/Kconfig
> index b12a59c..ca6b372 100644
> --- a/drivers/video/omap2/displays/Kconfig
> +++ b/drivers/video/omap2/displays/Kconfig
> @@ -5,7 +5,7 @@ config PANEL_GENERIC
> tristate "Generic Panel"
> help
> Generic panel driver.
> - Used for DVI output for Beagle and OMAP3 SDP.
> + Used for DVI output for Beagle, Devkit8000 and OMAP3 SDP.
>
[Hiremath, Vaibhav] I think we should remove board name from here, since all the OMAP board supporting DVI output would use this.
> config PANEL_SHARP_LS037V7DW01
> tristate "Sharp LS037V7DW01 LCD Panel"
> @@ -13,6 +13,12 @@ config PANEL_SHARP_LS037V7DW01
> help
> LCD Panel used in TI's SDP3430 and EVM boards
>
> +config PANEL_INNOLUX_AT070TN83
> + tristate "Innolux AT070TN83 LCD Panel"
> + depends on OMAP2_DSS
> + help
> + LCD Panel used in TimLL's Devkit8000
> +
> config PANEL_TAAL
> tristate "Taal DSI Panel"
> depends on OMAP2_DSS_DSI
> diff --git a/drivers/video/omap2/displays/Makefile
> b/drivers/video/omap2/displays/Makefile
> index 9556464..087b192 100644
> --- a/drivers/video/omap2/displays/Makefile
> +++ b/drivers/video/omap2/displays/Makefile
> @@ -2,3 +2,4 @@ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
> obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
>
> obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
> +obj-$(CONFIG_PANEL_INNOLUX_AT070TN83) += panel-innolux-at070tn83.o
> diff --git a/drivers/video/omap2/displays/panel-innolux-at070tn83.c
> b/drivers/video/omap2/displays/panel-innolux-at070tn83.c
> new file mode 100644
> index 0000000..f1d7f69
> --- /dev/null
> +++ b/drivers/video/omap2/displays/panel-innolux-at070tn83.c
> @@ -0,0 +1,107 @@
> +/*
> + * LCD panel driver for Innolux AT70TN83
> + *
> + * Copyright (C) 2010 Thomas Weber <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of
> MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
> License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public
> License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/regulator/consumer.h>
[Hiremath, Vaibhav] Do you need consumer.h file here?
> +#include <linux/err.h>
> +
> +#include <plat/display.h>
> +
> +static struct omap_video_timings innolux_at_timings = {
> + .x_res = 800,
> + .y_res = 480,
> +
> + .pixel_clock = 40000,
> +
> + .hsw = 48,
> + .hfp = 1,
> + .hbp = 1,
> +
> + .vsw = 3,
> + .vfp = 12,
> + .vbp = 25,
> +};
> +
> +static int innolux_at_panel_probe(struct omap_dss_device *dssdev)
> +{
> + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
> + OMAP_DSS_LCD_IHS;
> + dssdev->panel.acb = 0x28;
> + dssdev->panel.timings = innolux_at_timings;
> +
> + return 0;
> +}
> +
> +static void innolux_at_panel_remove(struct omap_dss_device *dssdev)
> +{
> +}
> +
> +static int innolux_at_panel_enable(struct omap_dss_device *dssdev)
> +{
> + return 0;
> +}
> +
> +static void innolux_at_panel_disable(struct omap_dss_device
> *dssdev)
> +{
> +
> + if (dssdev->platform_disable)
> + dssdev->platform_disable(dssdev);
> +
> +}
> +
> +static int innolux_at_panel_suspend(struct omap_dss_device *dssdev)
> +{
> + innolux_at_panel_disable(dssdev);
> + return 0;
> +}
> +
> +static int innolux_at_panel_resume(struct omap_dss_device *dssdev)
> +{
> + return innolux_at_panel_enable(dssdev);
> +}
> +
> +static struct omap_dss_driver innolux_at_driver = {
> + .probe = innolux_at_panel_probe,
> + .remove = innolux_at_panel_remove,
> +
> + .enable = innolux_at_panel_enable,
> + .disable = innolux_at_panel_disable,
> + .suspend = innolux_at_panel_suspend,
> + .resume = innolux_at_panel_resume,
> +
> + .driver = {
> + .name = "innolux_at_panel",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init innolux_at_panel_drv_init(void)
> +{
> + return omap_dss_register_driver(&innolux_at_driver);
> +}
> +
> +static void __exit innolux_at_panel_drv_exit(void)
> +{
> + omap_dss_unregister_driver(&innolux_at_driver);
> +}
> +
[Hiremath, Vaibhav] I think we can make use of panel_generic.c file for this display panel, I couldn't find anything different being done in this file except panel.config and acb configuration.
To support this panel you just need to define videomode in modedb.c file use boot argument for the same.
Thanks,
Vaibhav
> +module_init(innolux_at_panel_drv_init);
> +module_exit(innolux_at_panel_drv_exit);
> +MODULE_LICENSE("GPL");
> --
> 1.6.4.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-
> omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Feb 12, 2010 at 3:41 AM, Thomas Weber <[email protected]> wrote:
> This patch adds the 7 inch display for the DEVKIT8000.
>
> Signed-off-by: Thomas Weber <[email protected]>
> ---
> ?drivers/video/omap2/displays/Kconfig ? ? ? ? ? ? ? | ? ?8 ++-
> ?drivers/video/omap2/displays/Makefile ? ? ? ? ? ? ?| ? ?1 +
> ?.../video/omap2/displays/panel-innolux-at070tn83.c | ?107 ++++++++++++++++++++
> ?3 files changed, 115 insertions(+), 1 deletions(-)
> ?create mode 100644 drivers/video/omap2/displays/panel-innolux-at070tn83.c
>
> diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
> index b12a59c..ca6b372 100644
> --- a/drivers/video/omap2/displays/Kconfig
> +++ b/drivers/video/omap2/displays/Kconfig
> @@ -5,7 +5,7 @@ config PANEL_GENERIC
> ? ? ? ? tristate "Generic Panel"
> ? ? ? ? help
> ? ? ? ? ?Generic panel driver.
> - ? ? ? ? Used for DVI output for Beagle and OMAP3 SDP.
> + ? ? ? ? Used for DVI output for Beagle, Devkit8000 and OMAP3 SDP.
>
> ?config PANEL_SHARP_LS037V7DW01
> ? ? ? ? tristate "Sharp LS037V7DW01 LCD Panel"
> @@ -13,6 +13,12 @@ config PANEL_SHARP_LS037V7DW01
> ? ? ? ? help
> ? ? ? ? ? LCD Panel used in TI's SDP3430 and EVM boards
>
> +config PANEL_INNOLUX_AT070TN83
> + ? ? ? tristate "Innolux AT070TN83 LCD Panel"
> + ? ? ? depends on OMAP2_DSS
> + ? ? ? help
> + ? ? ? ?LCD Panel used in TimLL's Devkit8000
> +
> ?config PANEL_TAAL
> ? ? ? ? tristate "Taal DSI Panel"
> ? ? ? ? depends on OMAP2_DSS_DSI
> diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
> index 9556464..087b192 100644
> --- a/drivers/video/omap2/displays/Makefile
> +++ b/drivers/video/omap2/displays/Makefile
> @@ -2,3 +2,4 @@ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
> ?obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
>
> ?obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
> +obj-$(CONFIG_PANEL_INNOLUX_AT070TN83) += panel-innolux-at070tn83.o
> diff --git a/drivers/video/omap2/displays/panel-innolux-at070tn83.c b/drivers/video/omap2/displays/panel-innolux-at070tn83.c
> new file mode 100644
> index 0000000..f1d7f69
> --- /dev/null
> +++ b/drivers/video/omap2/displays/panel-innolux-at070tn83.c
> @@ -0,0 +1,107 @@
> +/*
> + * LCD panel driver for Innolux AT70TN83
> + *
> + * Copyright (C) 2010 Thomas Weber <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. ?See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. ?If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/err.h>
> +
> +#include <plat/display.h>
> +
> +static struct omap_video_timings innolux_at_timings = {
> + ? ? ? .x_res ? ? ? ? ?= 800,
> + ? ? ? .y_res ? ? ? ? ?= 480,
> +
> + ? ? ? .pixel_clock ? ?= 40000,
> +
> + ? ? ? .hsw ? ? ? ? ? ?= 48,
> + ? ? ? .hfp ? ? ? ? ? ?= 1,
> + ? ? ? .hbp ? ? ? ? ? ?= 1,
> +
> + ? ? ? .vsw ? ? ? ? ? ?= 3,
> + ? ? ? .vfp ? ? ? ? ? ?= 12,
> + ? ? ? .vbp ? ? ? ? ? ?= 25,
> +};
> +
> +static int innolux_at_panel_probe(struct omap_dss_device *dssdev)
> +{
> + ? ? ? dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
> + ? ? ? ? ? ? ? OMAP_DSS_LCD_IHS;
> + ? ? ? dssdev->panel.acb = 0x28;
> + ? ? ? dssdev->panel.timings = innolux_at_timings;
> +
> + ? ? ? return 0;
> +}
> +
Hi Thomas, Tomi,
Just curious, does this patch imply that code like this needs to be
written for every single LCD type and resolution that can be connected
to omap2? Maybe there is a better way, like a common table of timings
and values that can be selected with a module option or even
autodetected.
Thanks,
jaya
On Fri, 2010-02-12 at 06:55 +0100, ext Jaya Kumar wrote:
> On Fri, Feb 12, 2010 at 3:41 AM, Thomas Weber <[email protected]> wrote:
[snip]
> > +
> > +static struct omap_video_timings innolux_at_timings = {
> > + .x_res = 800,
> > + .y_res = 480,
> > +
> > + .pixel_clock = 40000,
> > +
> > + .hsw = 48,
> > + .hfp = 1,
> > + .hbp = 1,
> > +
> > + .vsw = 3,
> > + .vfp = 12,
> > + .vbp = 25,
> > +};
> > +
> > +static int innolux_at_panel_probe(struct omap_dss_device *dssdev)
> > +{
> > + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
> > + OMAP_DSS_LCD_IHS;
> > + dssdev->panel.acb = 0x28;
> > + dssdev->panel.timings = innolux_at_timings;
> > +
> > + return 0;
> > +}
> > +
>
> Hi Thomas, Tomi,
>
> Just curious, does this patch imply that code like this needs to be
> written for every single LCD type and resolution that can be connected
> to omap2? Maybe there is a better way, like a common table of timings
> and values that can be selected with a module option or even
> autodetected.
Yes, it is true that currently you need to write these for every LCD. I
have been thinking this issue, and I think we can make a common driver.
However, it's not just selecting timings, as LCDs can have also other
characteristics than just the video timings. For example, some may have
power on/off line, some reset enable/disable, some need 50ms after
reset, some 80ms after reset etc.
But if we manage to get a sane set of those settings into the table, we
could perhaps cover most of the "dummy" LCDs with it.
This change doesn't probably need any changes to the DSS core, only for
the panel driver. Any takers for this task? =)
Tomi
Tomi Valkeinen wrote:
> On Fri, 2010-02-12 at 06:55 +0100, ext Jaya Kumar wrote:
>
>> On Fri, Feb 12, 2010 at 3:41 AM, Thomas Weber <[email protected]> wrote:
>>
>
> [snip]
>
>
>>> +
>>> +static struct omap_video_timings innolux_at_timings = {
>>> + .x_res = 800,
>>> + .y_res = 480,
>>> +
>>> + .pixel_clock = 40000,
>>> +
>>> + .hsw = 48,
>>> + .hfp = 1,
>>> + .hbp = 1,
>>> +
>>> + .vsw = 3,
>>> + .vfp = 12,
>>> + .vbp = 25,
>>> +};
>>> +
>>> +static int innolux_at_panel_probe(struct omap_dss_device *dssdev)
>>> +{
>>> + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
>>> + OMAP_DSS_LCD_IHS;
>>> + dssdev->panel.acb = 0x28;
>>> + dssdev->panel.timings = innolux_at_timings;
>>> +
>>> + return 0;
>>> +}
>>> +
>>>
>> Hi Thomas, Tomi,
>>
>> Just curious, does this patch imply that code like this needs to be
>> written for every single LCD type and resolution that can be connected
>> to omap2? Maybe there is a better way, like a common table of timings
>> and values that can be selected with a module option or even
>> autodetected.
>>
>
> Yes, it is true that currently you need to write these for every LCD. I
> have been thinking this issue, and I think we can make a common driver.
>
> However, it's not just selecting timings, as LCDs can have also other
> characteristics than just the video timings. For example, some may have
> power on/off line, some reset enable/disable, some need 50ms after
> reset, some 80ms after reset etc.
>
> But if we manage to get a sane set of those settings into the table, we
> could perhaps cover most of the "dummy" LCDs with it.
>
> This change doesn't probably need any changes to the DSS core, only for
> the panel driver. Any takers for this task? =)
>
> Tomi
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
Hello,
sorry but I am not able to take the task.
Make it sense to rework this patch or do you want first the changes to
the panel driver?
Thomas
On Fri, 2010-02-19 at 13:57 +0100, ext Thomas Weber wrote:
> Tomi Valkeinen wrote:
> > On Fri, 2010-02-12 at 06:55 +0100, ext Jaya Kumar wrote:
> >
> >> On Fri, Feb 12, 2010 at 3:41 AM, Thomas Weber <[email protected]> wrote:
> >>
> >
> > [snip]
> >
> >
> >>> +
> >>> +static struct omap_video_timings innolux_at_timings = {
> >>> + .x_res = 800,
> >>> + .y_res = 480,
> >>> +
> >>> + .pixel_clock = 40000,
> >>> +
> >>> + .hsw = 48,
> >>> + .hfp = 1,
> >>> + .hbp = 1,
> >>> +
> >>> + .vsw = 3,
> >>> + .vfp = 12,
> >>> + .vbp = 25,
> >>> +};
> >>> +
> >>> +static int innolux_at_panel_probe(struct omap_dss_device *dssdev)
> >>> +{
> >>> + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
> >>> + OMAP_DSS_LCD_IHS;
> >>> + dssdev->panel.acb = 0x28;
> >>> + dssdev->panel.timings = innolux_at_timings;
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>>
> >> Hi Thomas, Tomi,
> >>
> >> Just curious, does this patch imply that code like this needs to be
> >> written for every single LCD type and resolution that can be connected
> >> to omap2? Maybe there is a better way, like a common table of timings
> >> and values that can be selected with a module option or even
> >> autodetected.
> >>
> >
> > Yes, it is true that currently you need to write these for every LCD. I
> > have been thinking this issue, and I think we can make a common driver.
> >
> > However, it's not just selecting timings, as LCDs can have also other
> > characteristics than just the video timings. For example, some may have
> > power on/off line, some reset enable/disable, some need 50ms after
> > reset, some 80ms after reset etc.
> >
> > But if we manage to get a sane set of those settings into the table, we
> > could perhaps cover most of the "dummy" LCDs with it.
> >
> > This change doesn't probably need any changes to the DSS core, only for
> > the panel driver. Any takers for this task? =)
> >
> > Tomi
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> >
> >
> Hello,
>
> sorry but I am not able to take the task.
> Make it sense to rework this patch or do you want first the changes to
> the panel driver?
I probably won't have time to implement this generic panel driver yet.
However, I will be merging some DSS driver model changes (sent to
mailing lists) soon, after which this patch needs to be changed a bit.
The changes can be found from
http://gitorious.org/linux-omap-dss2/linux/commits/work but they may
still change a bit.
Tomi