Andrew,
When user application wants to set rtc time, RTC subsystem takes advantage of
'rtc_valid_tm(tm)' to check 'rtc_time *tm' value validity, it make sure the 'tm->tm_year'
is larger than 70,so if '70< tm_year < 100', the '(settm->tm_year - 100)' will be negative.
'
Setting the negative value to hardware register will be invalid, so I add the 'if' condition
to make sure set a valid value to register.
Signed-off-by: Wan ZongShun <[email protected]>
---
drivers/rtc/rtc-nuc900.c | 14 ++++++++++----
1 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/rtc/rtc-nuc900.c b/drivers/rtc/rtc-nuc900.c
index 21d1330..20bc70b 100644
--- a/drivers/rtc/rtc-nuc900.c
+++ b/drivers/rtc/rtc-nuc900.c
@@ -116,12 +116,18 @@ static void nuc900_rtc_bcd2bin(unsigned int timereg,
rtc_valid_tm(tm);
}
-static void nuc900_rtc_bin2bcd(struct rtc_time *settm,
+static void nuc900_rtc_bin2bcd(struct device *dev, struct rtc_time *settm,
struct nuc900_bcd_time *gettm)
{
gettm->bcd_mday = bin2bcd(settm->tm_mday) << 0;
gettm->bcd_mon = bin2bcd(settm->tm_mon) << 8;
- gettm->bcd_year = bin2bcd(settm->tm_year - 100) << 16;
+
+ if (settm->tm_year < 100) {
+ dev_warn(dev, "The year will be between 1970-1999, right?\n");
+ gettm->bcd_year = bin2bcd(settm->tm_year) << 16;
+ } else {
+ gettm->bcd_year = bin2bcd(settm->tm_year - 100) << 16;
+ }
gettm->bcd_sec = bin2bcd(settm->tm_sec) << 0;
gettm->bcd_min = bin2bcd(settm->tm_min) << 8;
@@ -176,7 +182,7 @@ static int nuc900_rtc_set_time(struct device *dev, struct rtc_time *tm)
unsigned long val;
int *err;
- nuc900_rtc_bin2bcd(tm, &gettm);
+ nuc900_rtc_bin2bcd(dev, tm, &gettm);
err = check_rtc_access_enable(rtc);
if (IS_ERR(err))
@@ -211,7 +217,7 @@ static int nuc900_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
unsigned long val;
int *err;
- nuc900_rtc_bin2bcd(&alrm->time, &tm);
+ nuc900_rtc_bin2bcd(dev, &alrm->time, &tm);
err = check_rtc_access_enable(rtc);
if (IS_ERR(err))
--
1.6.3.3