The patch below updates a broken web address to the company site
due to me being unable to locate the original content. If anybody
knows let me know and I'll resend this.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/binfmt_misc.txt | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/binfmt_misc.txt b/Documentation/binfmt_misc.txt
index f609ebf..c1ed694 100644
--- a/Documentation/binfmt_misc.txt
+++ b/Documentation/binfmt_misc.txt
@@ -111,6 +111,6 @@ cause unexpected behaviour and can be a security hazard.
There is a web page about binfmt_misc at
-http://www.tat.physik.uni-tuebingen.de/~rguenth/linux/binfmt_misc.html
+http://www.tat.physik.uni-tuebingen.de
Richard Günther <[email protected]>
--
1.7.1.rc1.21.gf3bd6
The patch below updates a broken web address.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/DocBook/scsi.tmpl | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl
index d87f456..324b534 100644
--- a/Documentation/DocBook/scsi.tmpl
+++ b/Documentation/DocBook/scsi.tmpl
@@ -393,7 +393,7 @@
</para>
<para>
For documentation see
- <ulink url='http://www.torque.net/sg/sdebug26.html'>http://www.torque.net/sg/sdebug26.html</ulink>
+ <ulink url='http://sg.danny.cz/sg/sdebug26.html'>http://sg.danny.cz/sg/sdebug26.html</ulink>
</para>
<!-- !Edrivers/scsi/scsi_debug.c -->
</sect2>
--
1.7.1.rc1.21.gf3bd6
The patch below updates a broken web address.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/fb/framebuffer.txt | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.txt
index fe79e3c..58c5ae2 100644
--- a/Documentation/fb/framebuffer.txt
+++ b/Documentation/fb/framebuffer.txt
@@ -330,7 +330,7 @@ and on its mirrors.
The latest version of fbset can be found at
- http://home.tvd.be/cr26864/Linux/fbdev/
+ http://www.linux-fbdev.org/
10. Credits
--
1.7.1.rc1.21.gf3bd6
The patch below updates a broken web address.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/filesystems/isofs.txt | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/filesystems/isofs.txt b/Documentation/filesystems/isofs.txt
index 3c367c3..ba0a933 100644
--- a/Documentation/filesystems/isofs.txt
+++ b/Documentation/filesystems/isofs.txt
@@ -41,7 +41,7 @@ Mount options unique to the isofs filesystem.
sbsector=xxx Session begins from sector xxx
Recommended documents about ISO 9660 standard are located at:
-http://www.y-adagio.com/public/standards/iso_cdromr/tocont.htm
+http://www.y-adagio.com/
ftp://ftp.ecma.ch/ecma-st/Ecma-119.pdf
Quoting from the PDF "This 2nd Edition of Standard ECMA-119 is technically
identical with ISO 9660.", so it is a valid and gratis substitute of the
--
1.7.1.rc1.21.gf3bd6
The patch below updates some web addresses, and also removes some
web addresses due to me being unable to locate them at all.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/devices.txt | 8 ++------
1 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 1d83d12..32c6f7e 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -1517,7 +1517,7 @@ Your cooperation is appreciated.
...
The driver and documentation may be obtained from
- http://www.proximity.com.au/~brian/winradio/
+ http://www.winradio.com/
82 block I2O hard disk
0 = /dev/i2o/hdag 33rd I2O hard disk, whole disk
@@ -1723,7 +1723,7 @@ Your cooperation is appreciated.
1 = /dev/comedi1 Second comedi device
...
- See http://stm.lbl.gov/comedi or http://www.llp.fu-berlin.de/.
+ See http://stm.lbl.gov/comedi.
98 block User-mode virtual block device
0 = /dev/ubda First user-mode block device
@@ -1984,8 +1984,6 @@ Your cooperation is appreciated.
256 NetWare volumes can be supported in a single
machine.
- http://www.kernel.org/pub/linux/kernel/people/jmerkey/nwfs
-
0 = /dev/nwfs/v0 First NetWare (NWFS) Logical Volume
1 = /dev/nwfs/v1 Second NetWare (NWFS) Logical Volume
2 = /dev/nwfs/v2 Third NetWare (NWFS) Logical Volume
@@ -2591,8 +2589,6 @@ Your cooperation is appreciated.
1 = /dev/intermezzo1 Second cache manager
...
- See http://www.inter-mezzo.org/ for more information.
-
186 char Object-based storage control device
0 = /dev/obd0 First obd control device
1 = /dev/obd1 Second obd control device
--
1.7.1.rc1.21.gf3bd6
The patch below updates a broken web address.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/development-process/4.Coding | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding
index a5a3450..2278693 100644
--- a/Documentation/development-process/4.Coding
+++ b/Documentation/development-process/4.Coding
@@ -281,7 +281,7 @@ With sparse, the programmer can be warned about confusion between
user-space and kernel-space addresses, mixture of big-endian and
small-endian quantities, the passing of integer values where a set of bit
flags is expected, and so on. Sparse must be installed separately (it can
-be found at http://www.kernel.org/pub/software/devel/sparse/ if your
+be found at https://sparse.wiki.kernel.org/index.php/Main_Page if your
distributor does not package it); it can then be run on the code by adding
"C=1" to your make command.
--
1.7.1.rc1.21.gf3bd6
The patch below removes a web address due to me being unable
to locate this at all. If anybody knows the location let
me know and I'll resend.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/blockdev/paride.txt | 5 -----
1 files changed, 0 insertions(+), 5 deletions(-)
diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt
index e431267..11c4e3f 100644
--- a/Documentation/blockdev/paride.txt
+++ b/Documentation/blockdev/paride.txt
@@ -409,9 +409,4 @@ the list manager is a robot that will subscribe you using the reply
address in your mail headers. REMOVE any anti-spam gimmicks you may
have in your mail headers, when sending mail to the list server.
-You might also find some useful information on the linux-parport
-web pages (although they are not always up to date) at
-
- http://www.torque.net/parport/
-
--
1.7.1.rc1.21.gf3bd6
The patch below updates some broken web addresses.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/filesystems/befs.txt | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/filesystems/befs.txt b/Documentation/filesystems/befs.txt
index 67391a1..6e49c36 100644
--- a/Documentation/filesystems/befs.txt
+++ b/Documentation/filesystems/befs.txt
@@ -31,7 +31,7 @@ Current maintainer: Sergey S. Kostyliov <[email protected]>
WHAT IS THIS DRIVER?
==================
-This module implements the native filesystem of BeOS <http://www.be.com/>
+This module implements the native filesystem of BeOS http://www.beincorporated.com/
for the linux 2.4.1 and later kernels. Currently it is a read-only
implementation.
@@ -61,7 +61,7 @@ step 2. Configuration & make kernel
The linux kernel has many compile-time options. Most of them are beyond the
scope of this document. I suggest the Kernel-HOWTO document as a good general
-reference on this topic. <http://www.linux.com/howto/Kernel-HOWTO.html>
+reference on this topic. http://www.linuxdocs.org/HOWTOs/Kernel-HOWTO-4.html
However, to use the BeFS module, you must enable it at configure time.
--
1.7.1.rc1.21.gf3bd6
The patch below adds a web address until somebody can really go through
this scripts and make sure these addresses are working.
(will do but not today...)
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/dvb/get_dvb_firmware | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 239cbdb..784cba2 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -18,6 +18,10 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+# Note: some web address are broken with the scripts, if you know of the
+# locations please send out a patch if possible. here is a location for some
+# firmware http://www.linuxtv.org/downloads/firmware/
+
use File::Temp qw/ tempdir /;
use IO::Handle;
--
1.7.1.rc1.21.gf3bd6
The patch below updates a broken web address.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/dvb/faq.txt | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt
index 2511a33..121832e 100644
--- a/Documentation/dvb/faq.txt
+++ b/Documentation/dvb/faq.txt
@@ -76,7 +76,7 @@ Some very frequently asked questions about linuxtv-dvb
the TuxBox CVS many interesting DVB applications and the dBox2
DVB source
- http://sourceforge.net/projects/dvbsak/
+ http://www.linuxtv.org/downloads/
DVB Swiss Army Knife library and utilities
http://www.nenie.org/misc/mpsys/
--
1.7.1.rc1.21.gf3bd6
The patch below updates a broken web address.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/device-mapper/dm-crypt.txt | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/device-mapper/dm-crypt.txt
index 6680cab..524de92 100644
--- a/Documentation/device-mapper/dm-crypt.txt
+++ b/Documentation/device-mapper/dm-crypt.txt
@@ -36,7 +36,7 @@ Example scripts
===============
LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
encryption with dm-crypt using the 'cryptsetup' utility, see
-http://luks.endorphin.org/
+http://clemens.endorphin.org/cryptography
[[
#!/bin/sh
--
1.7.1.rc1.21.gf3bd6
The patch below removes a web address, due to me
being unable to locate this at all. If anybody knows
where this one is let me know, and I'll resend.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/DocBook/v4l/compat.xml | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml
index b42b935..b03b663 100644
--- a/Documentation/DocBook/v4l/compat.xml
+++ b/Documentation/DocBook/v4l/compat.xml
@@ -1090,9 +1090,8 @@ stream. The data type name for timestamps is stamp_t, defined as a
signed 64-bit integer. Output devices should not send a buffer out
until the time in the timestamp field has arrived. I would like to
follow SGI's lead, and adopt a multimedia timestamping system like
-their UST (Unadjusted System Time). See
-http://reality.sgi.com/cpirazzi_engr/lg/time/intro.html. [This link is
-no longer valid.] UST uses timestamps that are 64-bit signed integers
+their UST (Unadjusted System Time).
+UST uses timestamps that are 64-bit signed integers
(not struct timeval's) and given in nanosecond units. The UST clock
starts at zero when the system is booted and runs continuously and
uniformly. It takes a little over 292 years for UST to overflow. There
--
1.7.1.rc1.21.gf3bd6
The patch below removes info about an old program in of which
I could not find for the life of me, and just points to a
an updated address. If anybody knows let me know and I'll resend.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/cdrom/packet-writing.txt | 12 +-----------
1 files changed, 1 insertions(+), 11 deletions(-)
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt
index 1c40777..a9433b4 100644
--- a/Documentation/cdrom/packet-writing.txt
+++ b/Documentation/cdrom/packet-writing.txt
@@ -94,17 +94,7 @@ Using the pktcdvd sysfs interface
---------------------------------
Since Linux 2.6.20, the pktcdvd module has a sysfs interface
-and can be controlled by it. For example the "pktcdvd" tool uses
-this interface. (see http://people.freenet.de/BalaGi#pktcdvd )
-
-"pktcdvd" works similar to "pktsetup", e.g.:
-
- # pktcdvd -a dev_name /dev/hdc
- # mkudffs /dev/pktcdvd/dev_name
- # mount -t udf -o rw,noatime /dev/pktcdvd/dev_name /dvdram
- # cp files /dvdram
- # umount /dvdram
- # pktcdvd -r dev_name
+and can be controlled by it. see: http://packet-cd.sourceforge.net/
For a description of the sysfs interface look into the file:
--
1.7.1.rc1.21.gf3bd6
The below patch fixes a typo that breaks the location to the
web address.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/cgroups/cpusets.txt | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 51682ab..5d0d569 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -691,7 +691,7 @@ There are ways to query or modify cpusets:
cat, rmdir commands from the shell, or their equivalent from C.
- via the C library libcpuset.
- via the C library libcgroup.
- (http://sourceforge.net/proects/libcg/)
+ (http://sourceforge.net/projects/libcg/)
- via the python application cset.
(http://developer.novell.com/wiki/index.php/Cpuset)
--
1.7.1.rc1.21.gf3bd6
The patch below updates a broken web address.
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/DocBook/v4l/fdl-appendix.xml | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Documentation/DocBook/v4l/fdl-appendix.xml b/Documentation/DocBook/v4l/fdl-appendix.xml
index b6ce50d..ae22394 100644
--- a/Documentation/DocBook/v4l/fdl-appendix.xml
+++ b/Documentation/DocBook/v4l/fdl-appendix.xml
@@ -2,7 +2,7 @@
The GNU Free Documentation License 1.1 in DocBook
Markup by Eric Baudais <[email protected]>
Maintained by the GNOME Documentation Project
- http://developer.gnome.org/projects/gdp
+ http://live.gnome.org/DocumentationProject
Version: 1.0.1
Last Modified: Nov 16, 2000
-->
--
1.7.1.rc1.21.gf3bd6
Justin P. Mattock wrote:
> The patch below removes a web address due to me being unable
> to locate this at all. If anybody knows the location let
> me know and I'll resend.
>
> Signed-off-by: Justin P. Mattock <[email protected]>
>
> ---
> Documentation/blockdev/paride.txt | 5 -----
> 1 files changed, 0 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt
> index e431267..11c4e3f 100644
> --- a/Documentation/blockdev/paride.txt
> +++ b/Documentation/blockdev/paride.txt
> @@ -409,9 +409,4 @@ the list manager is a robot that will subscribe you using the reply
> address in your mail headers. REMOVE any anti-spam gimmicks you may
> have in your mail headers, when sending mail to the list server.
>
> -You might also find some useful information on the linux-parport
> -web pages (although they are not always up to date) at
> -
> - http://www.torque.net/parport/
> -
I don't think removing an address like this is the best option. At least
having the "old" address allows me to go to http://www.archive.org and find out
a lot of useful information.
Maybe just marking it as "(dead link)" and warning the respective
maintainer would be better?
--
Paulo Marques - http://www.grupopie.com
"I used to be indecisive, but now I'm not so sure."
On 07/21/2010 05:05 AM, Paulo Marques wrote:
> Justin P. Mattock wrote:
>> The patch below removes a web address due to me being unable
>> to locate this at all. If anybody knows the location let
>> me know and I'll resend.
>>
>> Signed-off-by: Justin P. Mattock<[email protected]>
>>
>> ---
>> Documentation/blockdev/paride.txt | 5 -----
>> 1 files changed, 0 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt
>> index e431267..11c4e3f 100644
>> --- a/Documentation/blockdev/paride.txt
>> +++ b/Documentation/blockdev/paride.txt
>> @@ -409,9 +409,4 @@ the list manager is a robot that will subscribe you using the reply
>> address in your mail headers. REMOVE any anti-spam gimmicks you may
>> have in your mail headers, when sending mail to the list server.
>>
>> -You might also find some useful information on the linux-parport
>> -web pages (although they are not always up to date) at
>> -
>> - http://www.torque.net/parport/
>> -
>
> I don't think removing an address like this is the best option. At least
> having the "old" address allows me to go to http://www.archive.org and find out
> a lot of useful information.
>
> Maybe just marking it as "(dead link)" and warning the respective
> maintainer would be better?
>
the whole tourque.net thing is dead.. it's not just this one here..
there must be at-least four or five of them throughout the Documentation.
is there a new updated location? or is http://www.archive.org already the new
updated address?
Justin P. Mattock
On Wed, 21 Jul 2010 06:38:08 -0700 Justin P. Mattock wrote:
> On 07/21/2010 05:05 AM, Paulo Marques wrote:
> > Justin P. Mattock wrote:
> >> The patch below removes a web address due to me being unable
> >> to locate this at all. If anybody knows the location let
> >> me know and I'll resend.
> >>
> >> Signed-off-by: Justin P. Mattock<[email protected]>
> >>
> >> ---
> >> Documentation/blockdev/paride.txt | 5 -----
> >> 1 files changed, 0 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt
> >> index e431267..11c4e3f 100644
> >> --- a/Documentation/blockdev/paride.txt
> >> +++ b/Documentation/blockdev/paride.txt
> >> @@ -409,9 +409,4 @@ the list manager is a robot that will subscribe you using the reply
> >> address in your mail headers. REMOVE any anti-spam gimmicks you may
> >> have in your mail headers, when sending mail to the list server.
> >>
> >> -You might also find some useful information on the linux-parport
> >> -web pages (although they are not always up to date) at
> >> -
> >> - http://www.torque.net/parport/
> >> -
> >
> > I don't think removing an address like this is the best option. At least
> > having the "old" address allows me to go to http://www.archive.org and find out
> > a lot of useful information.
> >
> > Maybe just marking it as "(dead link)" and warning the respective
> > maintainer would be better?
> >
>
>
> the whole tourque.net thing is dead.. it's not just this one here..
> there must be at-least four or five of them throughout the Documentation.
>
> is there a new updated location? or is http://www.archive.org already the new
> updated address?
He means to look at an archive of torque.net by using the "wayback machine"
at archive.org. See http://web.archive.org/web/*/http://torque.net/parport/
and look at the latest archive of torque.net/parport/ .
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
On Tue, 20 Jul 2010 21:52:01 -0700 Justin P. Mattock wrote:
> The patch below updates a broken web address.
>
> Signed-off-by: Justin P. Mattock <[email protected]>
>
> ---
> Documentation/DocBook/scsi.tmpl | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl
> index d87f456..324b534 100644
> --- a/Documentation/DocBook/scsi.tmpl
> +++ b/Documentation/DocBook/scsi.tmpl
> @@ -393,7 +393,7 @@
> </para>
> <para>
> For documentation see
> - <ulink url='http://www.torque.net/sg/sdebug26.html'>http://www.torque.net/sg/sdebug26.html</ulink>
> + <ulink url='http://sg.danny.cz/sg/sdebug26.html'>http://sg.danny.cz/sg/sdebug26.html</ulink>
> </para>
> <!-- !Edrivers/scsi/scsi_debug.c -->
> </sect2>
> --
Thanks, good catch. I changed most of those...
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***