Add flow control processing.
Currently, there is no flow control processing.
Thus, Add flow control processing as
when there is no empty of tx buffer,
netif_stop_queue is called.
When there is empty buffer, netif_wake_queue is called.
Signed-off-by: Tomoya MORINAGA <[email protected]>
---
drivers/net/can/pch_can.c | 27 ++++++++-------------------
1 files changed, 8 insertions(+), 19 deletions(-)
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index 2d4ab0f..8686d93 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -899,6 +899,8 @@ MSG_OBJ:
dlc = 8;
stats->tx_bytes += dlc;
stats->tx_packets++;
+ if (int_stat == PCH_TX_OBJ_END)
+ netif_wake_queue(ndev);
}
int_stat = pch_can_int_pending(priv);
@@ -1037,18 +1039,6 @@ static int pch_close(struct net_device *ndev)
return 0;
}
-static int pch_get_msg_obj_sts(struct net_device *ndev, u32 obj_id)
-{
- u32 buffer_status = 0;
- struct pch_can_priv *priv = netdev_priv(ndev);
-
- /* Getting the message object status. */
- buffer_status = (u32) pch_can_get_buffer_status(priv);
-
- return buffer_status & obj_id;
-}
-
-
static netdev_tx_t pch_xmit(struct sk_buff *skb, struct net_device *ndev)
{
int i, j;
@@ -1060,17 +1050,16 @@ static netdev_tx_t pch_xmit(struct sk_buff *skb, struct net_device *ndev)
if (can_dropped_invalid_skb(ndev, skb))
return NETDEV_TX_OK;
- if (priv->tx_obj == PCH_TX_OBJ_END) { /* Point tail Obj */
- while (pch_get_msg_obj_sts(ndev, (((1 << PCH_TX_OBJ_NUM)-1) <<
- PCH_RX_OBJ_NUM)))
- udelay(500);
+ if (priv->tx_obj == PCH_TX_OBJ_END) {
+ if (ioread32(&priv->regs->treq2) & 0xfc00)
+ netif_stop_queue(ndev);
- priv->tx_obj = PCH_TX_OBJ_START; /* Point head of Tx Obj ID */
- tx_buffer_avail = priv->tx_obj; /* Point Tail of Tx Obj */
+ tx_buffer_avail = priv->tx_obj;
+ priv->tx_obj = PCH_TX_OBJ_START;
} else {
tx_buffer_avail = priv->tx_obj;
+ priv->tx_obj++;
}
- priv->tx_obj++;
/* Attaining the lock. */
spin_lock_irqsave(&priv->msgif_reg_lock, flags);
--
1.6.0.6