2010-12-07 18:32:56

by Paweł Sikora

[permalink] [raw]

Subject: [2.6.36.1] IGB driver handles all ethX interrupts on single cpu core.

---

Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: OEMB 00000000dfeb2040 00075 (v01 090210 OEMB1459 20100902 MSFT 00000097)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: HPET 00000000dfeaa670 00038 (v01 090210 OEMHPET 20100902 MSFT 00000097)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: IVRS 00000000dfeaa6b0 000B0 (v01 AMD RD890S 00202031 AMD 00000000)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: SRAT 00000000dfeaa760 00220 (v02 AMD F10 00000001 AMD 00000001)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: SLIT 00000000dfeaa980 0003C (v01 AMD F10 00000001 AMD 00000001)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: SSDT 00000000dfeaa9c0 02854 (v01 A M I POWERNOW 00000001 AMD 00000001)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: EINJ 00000000dfead220 00130 (v01 AMIER AMI_EINJ 20100902 MSFT 00000097)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: BERT 00000000dfead3b0 00030 (v01 AMIER AMI_BERT 20100902 MSFT 00000097)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: ERST 00000000dfead3e0 001B0 (v01 AMIER AMI_ERST 20100902 MSFT 00000097)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: HEST 00000000dfead590 000A8 (v01 AMIER ABC_HEST 20100902 MSFT 00000097)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 1 -> APIC 0x15 -> Node 1
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 1
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 1 -> APIC 0x17 -> Node 1
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 2 -> APIC 0x24 -> Node 2
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 2 -> APIC 0x25 -> Node 2
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 2 -> APIC 0x26 -> Node 2
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 2 -> APIC 0x27 -> Node 2
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 3 -> APIC 0x20 -> Node 3
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 3 -> APIC 0x21 -> Node 3
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 3 -> APIC 0x22 -> Node 3
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: PXM 3 -> APIC 0x23 -> Node 3
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: Node 0 PXM 0 100000-e0000000
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: Node 0 PXM 0 100000000-420000000
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: Node 1 PXM 1 420000000-820000000
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: Node 2 PXM 2 820000000-c20000000
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: Node 3 PXM 3 c20000000-1020000000
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: Node 0 [0,a0000) + [100000,e0000000) -> [0,e0000000)
Dec 7 14:44:51 hal kernel: [ 0.000000] SRAT: Node 0 [0,e0000000) + [100000000,420000000) -> [0,420000000)
Dec 7 14:44:51 hal kernel: [ 0.000000] NUMA: Allocated memnodemap from 16040 - 16180
Dec 7 14:44:51 hal kernel: [ 0.000000] NUMA: Using 29 for the hash shift.
Dec 7 14:44:51 hal kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000420000000
Dec 7 14:44:51 hal kernel: [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
Dec 7 14:44:51 hal kernel: [ 0.000000] Initmem setup node 1 0000000420000000-0000000820000000
Dec 7 14:44:51 hal kernel: [ 0.000000] NODE_DATA [0000000420000000 - 0000000420004fff]
Dec 7 14:44:51 hal kernel: [ 0.000000] Initmem setup node 2 0000000820000000-0000000c20000000
Dec 7 14:44:51 hal kernel: [ 0.000000] NODE_DATA [0000000820000000 - 0000000820004fff]
Dec 7 14:44:51 hal kernel: [ 0.000000] Initmem setup node 3 0000000c20000000-0000001020000000
Dec 7 14:44:51 hal kernel: [ 0.000000] NODE_DATA [0000000c20000000 - 0000000c20004fff]
Dec 7 14:44:51 hal kernel: [ 0.000000] [ffffea000e700000-ffffea000e7fffff] potential offnode page_structs
Dec 7 14:44:51 hal kernel: [ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff880100200000-ffff88010e3fffff] on node 0
Dec 7 14:44:51 hal kernel: [ 0.000000] [ffffea001c700000-ffffea001c7fffff] potential offnode page_structs
Dec 7 14:44:51 hal kernel: [ 0.000000] [ffffea000e800000-ffffea001c7fffff] PMD -> [ffff880420200000-ffff88042e1fffff] on node 1
Dec 7 14:44:51 hal kernel: [ 0.000000] early_res array is doubled to 64 at [16180 - 1697f]
Dec 7 14:44:51 hal kernel: [ 0.000000] [ffffea002a700000-ffffea002a7fffff] potential offnode page_structs
Dec 7 14:44:51 hal kernel: [ 0.000000] [ffffea001c800000-ffffea002a7fffff] PMD -> [ffff880820200000-ffff88082e1fffff] on node 2
Dec 7 14:44:51 hal kernel: [ 0.000000] [ffffea002a800000-ffffea00387fffff] PMD -> [ffff880c20200000-ffff880c2e1fffff] on node 3
Dec 7 14:44:51 hal kernel: [ 0.000000] Zone PFN ranges:
Dec 7 14:44:51 hal kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Dec 7 14:44:51 hal kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Dec 7 14:44:51 hal kernel: [ 0.000000] Normal 0x00100000 -> 0x01020000
Dec 7 14:44:51 hal kernel: [ 0.000000] Movable zone start PFN for each node
Dec 7 14:44:51 hal kernel: [ 0.000000] early_node_map[6] active PFN ranges
Dec 7 14:44:51 hal kernel: [ 0.000000] 0: 0x00000010 -> 0x00000096
Dec 7 14:44:51 hal kernel: [ 0.000000] 0: 0x00000100 -> 0x000dfe90
Dec 7 14:44:51 hal kernel: [ 0.000000] 0: 0x00100000 -> 0x00420000
Dec 7 14:44:51 hal kernel: [ 0.000000] 1: 0x00420000 -> 0x00820000
Dec 7 14:44:51 hal kernel: [ 0.000000] 2: 0x00820000 -> 0x00c20000
Dec 7 14:44:51 hal kernel: [ 0.000000] 3: 0x00c20000 -> 0x01020000
Dec 7 14:44:51 hal kernel: [ 0.000000] On node 0 totalpages: 4193814
Dec 7 14:44:51 hal kernel: [ 0.000000] DMA zone: 56 pages used for memmap
Dec 7 14:44:51 hal kernel: [ 0.000000] DMA zone: 0 pages reserved
Dec 7 14:44:51 hal kernel: [ 0.000000] DMA zone: 3918 pages, LIFO batch:0
Dec 7 14:44:51 hal kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap
Dec 7 14:44:51 hal kernel: [ 0.000000] DMA32 zone: 898760 pages, LIFO batch:31
Dec 7 14:44:51 hal kernel: [ 0.000000] Normal zone: 44800 pages used for memmap
Dec 7 14:44:51 hal kernel: [ 0.000000] Normal zone: 3232000 pages, LIFO batch:31
Dec 7 14:44:51 hal kernel: [ 0.000000] On node 1 totalpages: 4194304
Dec 7 14:44:51 hal kernel: [ 0.000000] Normal zone: 57344 pages used for memmap
Dec 7 14:44:51 hal kernel: [ 0.000000] Normal zone: 4136960 pages, LIFO batch:31
Dec 7 14:44:51 hal kernel: [ 0.000000] On node 2 totalpages: 4194304
Dec 7 14:44:51 hal kernel: [ 0.000000] Normal zone: 57344 pages used for memmap
Dec 7 14:44:51 hal kernel: [ 0.000000] Normal zone: 4136960 pages, LIFO batch:31
Dec 7 14:44:51 hal kernel: [ 0.000000] On node 3 totalpages: 4194304
Dec 7 14:44:51 hal kernel: [ 0.000000] Normal zone: 57344 pages used for memmap
Dec 7 14:44:51 hal kernel: [ 0.000000] Normal zone: 4136960 pages, LIFO batch:31
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x20] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x21] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x22] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x23] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x24] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x25] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x26] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x27] enabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
Dec 7 14:44:51 hal kernel: [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: IRQ0 used by override.
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: IRQ2 used by override.
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: IRQ9 used by override.
Dec 7 14:44:51 hal kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Dec 7 14:44:51 hal kernel: [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
Dec 7 14:44:51 hal kernel: [ 0.000000] SMP: Allowing 24 CPUs, 8 hotplug CPUs
Dec 7 14:44:51 hal kernel: [ 0.000000] nr_irqs_gsi: 40
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 0000000000096000 - 0000000000097000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 00000000dfe90000 - 00000000dfe9e000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 00000000dfe9e000 - 00000000dfea0000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 00000000dfea0000 - 00000000dfeb2000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 00000000dfeb2000 - 00000000dfee0000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000f0000000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000ffe00000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Dec 7 14:44:51 hal kernel: [ 0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:fe00000)
Dec 7 14:44:51 hal kernel: [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:24 nr_node_ids:4
Dec 7 14:44:51 hal kernel: [ 0.000000] early_res array is doubled to 128 at [16980 - 1797f]
Dec 7 14:44:51 hal kernel: [ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff880001a00000 s68864 r8192 d21248 u262144
Dec 7 14:44:51 hal kernel: [ 0.000000] pcpu-alloc: s68864 r8192 d21248 u262144 alloc=1*2097152
Dec 7 14:44:51 hal kernel: [ 0.000000] pcpu-alloc: [0] 00 01 02 03 16 20 -- -- [1] 04 05 06 07 17 21 -- --
Dec 7 14:44:51 hal kernel: [ 0.000000] pcpu-alloc: [2] 08 09 10 11 19 23 -- -- [3] 12 13 14 15 18 22 -- --
Dec 7 14:44:51 hal kernel: [ 0.000000] Built 4 zonelists in Zone order, mobility grouping on. Total pages: 16545558
Dec 7 14:44:51 hal kernel: [ 0.000000] Policy zone: Normal
Dec 7 14:44:51 hal kernel: [ 0.000000] Kernel command line: root=/dev/md0
Dec 7 14:44:51 hal kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Dec 7 14:44:51 hal kernel: [ 0.000000] Checking aperture...
Dec 7 14:44:51 hal kernel: [ 0.000000] No AGP bridge found
Dec 7 14:44:51 hal kernel: [ 0.000000] Node 0: aperture @ 20000000 size 32 MB
Dec 7 14:44:51 hal kernel: [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
Dec 7 14:44:51 hal kernel: [ 0.000000] Your BIOS doesn't leave a aperture memory hole
Dec 7 14:44:51 hal kernel: [ 0.000000] Please enable the IOMMU option in the BIOS setup
Dec 7 14:44:51 hal kernel: [ 0.000000] This costs you 64 MB of RAM
Dec 7 14:44:51 hal kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
Dec 7 14:44:51 hal kernel: [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Dec 7 14:44:51 hal kernel: [ 0.000000] Subtract (89 early reservations)
Dec 7 14:44:51 hal kernel: [ 0.000000] #1 [0001000000 - 000187ef88] TEXT DATA BSS
Dec 7 14:44:51 hal kernel: [ 0.000000] #2 [0037f33000 - 0037ff0000] RAMDISK
Dec 7 14:44:51 hal kernel: [ 0.000000] #3 [0000096800 - 0000100000] BIOS reserved
Dec 7 14:44:51 hal kernel: [ 0.000000] #4 [000187f000 - 000187f26b] BRK
Dec 7 14:44:51 hal kernel: [ 0.000000] #5 [0000010000 - 0000012000] TRAMPOLINE
Dec 7 14:44:51 hal kernel: [ 0.000000] #6 [0000012000 - 0000016000] ACPI WAKEUP
Dec 7 14:44:51 hal kernel: [ 0.000000] #7 [0000100000 - 0000102000] PGTABLE
Dec 7 14:44:51 hal kernel: [ 0.000000] #8 [0000102000 - 0000103000] PGTABLE
Dec 7 14:44:51 hal kernel: [ 0.000000] #9 [0000016000 - 000001603c] ACPI SLIT
Dec 7 14:44:51 hal kernel: [ 0.000000] #10 [0000016040 - 0000016180] MEMNODEMAP
Dec 7 14:44:51 hal kernel: [ 0.000000] #11 [0100000000 - 0100005000] NODE_DATA
Dec 7 14:44:51 hal kernel: [ 0.000000] #12 [0420000000 - 0420005000] NODE_DATA
Dec 7 14:44:51 hal kernel: [ 0.000000] #13 [0820000000 - 0820005000] NODE_DATA
Dec 7 14:44:51 hal kernel: [ 0.000000] #14 [0c20000000 - 0c20005000] NODE_DATA
Dec 7 14:44:51 hal kernel: [ 0.000000] #15 [000187f280 - 0001880280] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #16 [0001880280 - 0001881280] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #17 [0420005000 - 0420006000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #18 [0820005000 - 0820006000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #19 [0c20005000 - 0c20006000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #20 [0100005000 - 0100005c00] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #21 [0420006000 - 0420006c00] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #22 [0820006000 - 0820006c00] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #23 [0c20006000 - 0c20006c00] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #24 [0100200000 - 010e400000] MEMMAP 0
Dec 7 14:44:51 hal kernel: [ 0.000000] #25 [0420200000 - 042e200000] MEMMAP 1
Dec 7 14:44:51 hal kernel: [ 0.000000] #26 [0820200000 - 082e200000] MEMMAP 2
Dec 7 14:44:51 hal kernel: [ 0.000000] #27 [0c20200000 - 0c2e200000] MEMMAP 3
Dec 7 14:44:51 hal kernel: [ 0.000000] #28 [0001881280 - 0001899280] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #29 [0001899280 - 00018b1280] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #30 [00018b1280 - 00018c9280] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #31 [0420006c00 - 042001ec00] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #32 [0820006c00 - 082001ec00] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #33 [0c20006c00 - 0c2001ec00] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #34 [00018c9280 - 00018c92c1] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #35 [00018c9300 - 00018c9343] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #36 [00018c9380 - 00018c95e8] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #37 [00018c9600 - 00018c9668] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #38 [00018c9680 - 00018c96e8] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #39 [00018c9700 - 00018c9768] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #40 [00018c9780 - 00018c97e8] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #41 [00018c9800 - 00018c9868] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #42 [00018c9880 - 00018c98e8] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #43 [00018c9900 - 00018c9968] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #44 [00018c9980 - 00018c99e8] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #45 [00018c9a00 - 00018c9a68] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #46 [00018c9a80 - 00018c9ae8] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #47 [000187efc0 - 000187efe0] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #48 [00018c9b00 - 00018c9b20] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #49 [00018c9b40 - 00018c9b4e] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #50 [00018c9b80 - 00018c9b8e] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #51 [0001a00000 - 0001a18000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #52 [0001a40000 - 0001a58000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #53 [0001a80000 - 0001a98000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #54 [0001ac0000 - 0001ad8000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #55 [0001b00000 - 0001b18000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #56 [0001b40000 - 0001b58000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #57 [042e200000 - 042e218000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #58 [042e240000 - 042e258000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #59 [042e280000 - 042e298000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #60 [042e2c0000 - 042e2d8000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #61 [042e300000 - 042e318000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #62 [042e340000 - 042e358000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #63 [0c2e200000 - 0c2e218000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #64 [0c2e240000 - 0c2e258000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #65 [0c2e280000 - 0c2e298000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #66 [0c2e2c0000 - 0c2e2d8000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #67 [0c2e300000 - 0c2e318000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #68 [0c2e340000 - 0c2e358000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #69 [082e200000 - 082e218000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #70 [082e240000 - 082e258000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #71 [082e280000 - 082e298000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #72 [082e2c0000 - 082e2d8000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #73 [082e300000 - 082e318000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #74 [082e340000 - 082e358000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #75 [00018cbbc0 - 00018cbbe0] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #76 [00018cbc00 - 00018cbc20] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #77 [00018cbc40 - 00018cbca0] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #78 [00018cbcc0 - 00018cbd80] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #79 [00018cbd80 - 00018cbea0] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #80 [00018cbec0 - 00018cbf08] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #81 [00018cbf40 - 00018cbf88] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #82 [00018cbfc0 - 00018d3fc0] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #83 [0020000000 - 0024000000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #84 [00018c9bc0 - 00018c9be0] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #85 [0001b58000 - 0005b58000] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #86 [00018d3fc0 - 00018f3fc0] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #87 [00018f3fc0 - 0001933fc0] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] #88 [0000017980 - 000001f980] BOOTMEM
Dec 7 14:44:51 hal kernel: [ 0.000000] Memory: 66043328k/67633152k available (4392k kernel code, 526248k absent, 1063576k reserved, 2606k data, 484k init)
Dec 7 14:44:51 hal kernel: [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=4
Dec 7 14:44:51 hal kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 7 14:44:51 hal kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Dec 7 14:44:51 hal kernel: [ 0.000000] RCU-based detection of stalled CPUs is disabled.
Dec 7 14:44:51 hal kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
Dec 7 14:44:51 hal kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:872
Dec 7 14:44:51 hal kernel: [ 0.000000] Extended CMOS year: 2000
Dec 7 14:44:51 hal kernel: [ 0.000000] Console: colour VGA+ 80x25
Dec 7 14:44:51 hal kernel: [ 0.000000] console [tty0] enabled
Dec 7 14:44:51 hal kernel: [ 0.000000] allocated 671088640 bytes of page_cgroup
Dec 7 14:44:51 hal kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Dec 7 14:44:51 hal kernel: [ 0.000000] hpet clockevent registered
Dec 7 14:44:51 hal kernel: [ 0.000000] Fast TSC calibration using PIT
Dec 7 14:44:51 hal kernel: [ 0.000000] Detected 1999.985 MHz processor.
Dec 7 14:44:51 hal kernel: [ 0.010012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.63 BogoMIPS (lpj=6666610)
Dec 7 14:44:51 hal kernel: [ 0.010204] pid_max: default: 32768 minimum: 501
Dec 7 14:44:51 hal kernel: [ 0.010351] Security Framework initialized
Dec 7 14:44:51 hal kernel: [ 0.010448] SELinux: Disabled at boot.
Dec 7 14:44:51 hal kernel: [ 0.010539] AppArmor: AppArmor disabled by boot time parameter
Dec 7 14:44:51 hal kernel: [ 0.017708] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Dec 7 14:44:51 hal kernel: [ 0.042373] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Dec 7 14:44:51 hal kernel: [ 0.053098] Mount-cache hash table entries: 256
Dec 7 14:44:51 hal kernel: [ 0.053365] Initializing cgroup subsys cpuacct
Dec 7 14:44:51 hal kernel: [ 0.053463] Initializing cgroup subsys memory
Dec 7 14:44:51 hal kernel: [ 0.053586] Initializing cgroup subsys devices
Dec 7 14:44:51 hal kernel: [ 0.053679] Initializing cgroup subsys freezer
Dec 7 14:44:51 hal kernel: [ 0.053771] Initializing cgroup subsys net_cls
Dec 7 14:44:51 hal kernel: [ 0.053864] Initializing cgroup subsys blkio
Dec 7 14:44:51 hal kernel: [ 0.053986] tseg: 00dff00000
Dec 7 14:44:51 hal kernel: [ 0.053988] CPU: Physical Processor ID: 0
Dec 7 14:44:51 hal kernel: [ 0.054079] CPU: Processor Core ID: 0
Dec 7 14:44:51 hal kernel: [ 0.054170] mce: CPU supports 6 MCE banks
Dec 7 14:44:51 hal kernel: [ 0.054268] Performance Events: AMD PMU driver.
Dec 7 14:44:51 hal kernel: [ 0.054414] ... version: 0
Dec 7 14:44:51 hal kernel: [ 0.054505] ... bit width: 48
Dec 7 14:44:51 hal kernel: [ 0.054596] ... generic registers: 4
Dec 7 14:44:51 hal kernel: [ 0.054687] ... value mask: 0000ffffffffffff
Dec 7 14:44:51 hal kernel: [ 0.054783] ... max period: 00007fffffffffff
Dec 7 14:44:51 hal kernel: [ 0.054878] ... fixed-purpose events: 0
Dec 7 14:44:51 hal kernel: [ 0.054968] ... event mask: 000000000000000f
Dec 7 14:44:51 hal kernel: [ 0.055207] ACPI: Core revision 20100702
Dec 7 14:44:51 hal kernel: [ 0.063426] Setting APIC routing to physical flat
Dec 7 14:44:51 hal kernel: [ 0.063815] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Dec 7 14:44:51 hal kernel: [ 0.098419] CPU0: AMD Opteron(tm) Processor 6128 stepping 01
Dec 7 14:44:51 hal kernel: [ 0.099999] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.099999] Booting Node 0, Processors #1
Dec 7 14:44:51 hal kernel: [ 0.193348] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.193592] #2
Dec 7 14:44:51 hal kernel: [ 0.290013] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.290252] #3
Dec 7 14:44:51 hal kernel: [ 0.386679] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.386924] Ok.
Dec 7 14:44:51 hal kernel: [ 0.387011] Booting Node 1, Processors #4
Dec 7 14:44:51 hal kernel: [ 0.483350] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.483603] #5
Dec 7 14:44:51 hal kernel: [ 0.580017] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.580282] #6
Dec 7 14:44:51 hal kernel: [ 0.676688] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.676944] #7
Dec 7 14:44:51 hal kernel: [ 0.773357] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.773614] Ok.
Dec 7 14:44:51 hal kernel: [ 0.773702] Booting Node 3, Processors #8
Dec 7 14:44:51 hal kernel: [ 0.870023] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.870275] #9
Dec 7 14:44:51 hal kernel: [ 0.966684] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 0.966938] #10
Dec 7 14:44:51 hal kernel: [ 1.063355] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 1.063612] #11
Dec 7 14:44:51 hal kernel: [ 1.160035] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 1.160293] Ok.
Dec 7 14:44:51 hal kernel: [ 1.160381] Booting Node 2, Processors #12
Dec 7 14:44:51 hal kernel: [ 1.256695] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 1.256957] #13
Dec 7 14:44:51 hal kernel: [ 1.353382] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 1.353641] #14
Dec 7 14:44:51 hal kernel: [ 1.450021] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 1.450276] #15
Dec 7 14:44:51 hal kernel: [ 1.546704] NMI watchdog enabled, takes one hw-pmu counter.
Dec 7 14:44:51 hal kernel: [ 1.546919] Brought up 16 CPUs
Dec 7 14:44:51 hal kernel: [ 1.547010] Total of 16 processors activated (64031.69 BogoMIPS).
Dec 7 14:44:51 hal kernel: [ 1.550119] devtmpfs: initialized
Dec 7 14:44:51 hal kernel: [ 1.611450] regulator: core version 0.5
Dec 7 14:44:51 hal kernel: [ 1.611450] regulator: dummy:
Dec 7 14:44:51 hal kernel: [ 1.611450] NET: Registered protocol family 16
Dec 7 14:44:51 hal kernel: [ 1.613598] node 0 link 3: io port [1000, ffffff]
Dec 7 14:44:51 hal kernel: [ 1.613598] TOM: 00000000e0000000 aka 3584M
Dec 7 14:44:51 hal kernel: [ 1.613598] Fam 10h mmconf [e0000000, efffffff]
Dec 7 14:44:51 hal kernel: [ 1.613598] node 0 link 3: mmio [e0000000, efffffff] ==> none
Dec 7 14:44:51 hal kernel: [ 1.613598] node 0 link 3: mmio [f0000000, ffffffff]
Dec 7 14:44:51 hal kernel: [ 1.613598] node 0 link 3: mmio [a0000, bffff]
Dec 7 14:44:51 hal kernel: [ 1.613598] TOM2: 0000001020000000 aka 66048M
Dec 7 14:44:51 hal kernel: [ 1.613598] bus: [00, 1f] on node 0 link 3
Dec 7 14:44:51 hal kernel: [ 1.613598] bus: 00 index 0 [io 0x0000-0xffff]
Dec 7 14:44:51 hal kernel: [ 1.613598] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
Dec 7 14:44:51 hal kernel: [ 1.613598] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
Dec 7 14:44:51 hal kernel: [ 1.613598] bus: 00 index 3 [mem 0x1020000000-0xfcffffffff]
Dec 7 14:44:51 hal kernel: [ 1.613705] ACPI: bus type pci registered
Dec 7 14:44:51 hal kernel: [ 1.615279] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Dec 7 14:44:51 hal kernel: [ 1.615279] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Dec 7 14:44:51 hal kernel: [ 1.643724] PCI: Using configuration type 1 for base access
Dec 7 14:44:51 hal kernel: [ 1.656755] bio: create slab <bio-0> at 0
Dec 7 14:44:51 hal kernel: [ 1.657359] ACPI: EC: Look up EC in DSDT
Dec 7 14:44:51 hal kernel: [ 1.658527] ACPI Error (dswload-0677): [PCI0] Namespace lookup failure, AE_NOT_FOUND
Dec 7 14:44:51 hal kernel: [ 1.658774] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20100702/psloop-231)
Dec 7 14:44:51 hal kernel: [ 1.660177] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81870850), AE_NOT_FOUND
Dec 7 14:44:51 hal kernel: [ 1.660520] ACPI: Executed 4 blocks of module-level executable AML code
Dec 7 14:44:51 hal kernel: [ 1.666874] ACPI: Interpreter enabled
Dec 7 14:44:51 hal kernel: [ 1.666971] ACPI: (supports S0 S1 S4 S5)
Dec 7 14:44:51 hal kernel: [ 1.667293] ACPI: Using IOAPIC for interrupt routing
Dec 7 14:44:51 hal kernel: [ 1.680126] ACPI Warning: Incorrect checksum in table [OEMB] - 0xB5, should be 0xB2 (20100702/tbutils-314)
Dec 7 14:44:51 hal kernel: [ 1.680618] ACPI: No dock devices found.
Dec 7 14:44:51 hal kernel: [ 1.680716] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Dec 7 14:44:51 hal kernel: [ 1.680990] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Dec 7 14:44:51 hal kernel: [ 1.683386] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
Dec 7 14:44:51 hal kernel: [ 1.683494] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
Dec 7 14:44:51 hal kernel: [ 1.683601] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
Dec 7 14:44:51 hal kernel: [ 1.683731] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
Dec 7 14:44:51 hal kernel: [ 1.683860] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
Dec 7 14:44:51 hal kernel: [ 1.683989] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
Dec 7 14:44:51 hal kernel: [ 1.684248] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
Dec 7 14:44:51 hal kernel: [ 1.684251] pci 0000:00:04.0: PME# disabled
Dec 7 14:44:51 hal kernel: [ 1.684301] pci 0000:00:11.0: reg 10: [io 0xd000-0xd007]
Dec 7 14:44:51 hal kernel: [ 1.684310] pci 0000:00:11.0: reg 14: [io 0xc000-0xc003]
Dec 7 14:44:51 hal kernel: [ 1.684320] pci 0000:00:11.0: reg 18: [io 0xb000-0xb007]
Dec 7 14:44:51 hal kernel: [ 1.684329] pci 0000:00:11.0: reg 1c: [io 0xa000-0xa003]
Dec 7 14:44:51 hal kernel: [ 1.684338] pci 0000:00:11.0: reg 20: [io 0x9000-0x900f]
Dec 7 14:44:51 hal kernel: [ 1.684348] pci 0000:00:11.0: reg 24: [mem 0xfeafa400-0xfeafa7ff]
Dec 7 14:44:51 hal kernel: [ 1.684405] pci 0000:00:12.0: reg 10: [mem 0xfeaf6000-0xfeaf6fff]
Dec 7 14:44:51 hal kernel: [ 1.684476] pci 0000:00:12.1: reg 10: [mem 0xfeaf7000-0xfeaf7fff]
Dec 7 14:44:51 hal kernel: [ 1.684557] pci 0000:00:12.2: reg 10: [mem 0xfeafa800-0xfeafa8ff]
Dec 7 14:44:51 hal kernel: [ 1.684622] pci 0000:00:12.2: supports D1 D2
Dec 7 14:44:51 hal kernel: [ 1.684624] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Dec 7 14:44:51 hal kernel: [ 1.684628] pci 0000:00:12.2: PME# disabled
Dec 7 14:44:51 hal kernel: [ 1.684660] pci 0000:00:13.0: reg 10: [mem 0xfeaf8000-0xfeaf8fff]
Dec 7 14:44:51 hal kernel: [ 1.684730] pci 0000:00:13.1: reg 10: [mem 0xfeaf9000-0xfeaf9fff]
Dec 7 14:44:51 hal kernel: [ 1.684813] pci 0000:00:13.2: reg 10: [mem 0xfeafac00-0xfeafacff]
Dec 7 14:44:51 hal kernel: [ 1.684878] pci 0000:00:13.2: supports D1 D2
Dec 7 14:44:51 hal kernel: [ 1.684880] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Dec 7 14:44:51 hal kernel: [ 1.684884] pci 0000:00:13.2: PME# disabled
Dec 7 14:44:51 hal kernel: [ 1.685005] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
Dec 7 14:44:51 hal kernel: [ 1.685015] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
Dec 7 14:44:51 hal kernel: [ 1.685024] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
Dec 7 14:44:51 hal kernel: [ 1.685033] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
Dec 7 14:44:51 hal kernel: [ 1.685042] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
Dec 7 14:44:51 hal kernel: [ 1.685202] pci 0000:00:14.5: reg 10: [mem 0xfeafb000-0xfeafbfff]
Dec 7 14:44:51 hal kernel: [ 1.685627] pci 0000:02:00.0: reg 10: [mem 0xfeb60000-0xfeb7ffff]
Dec 7 14:44:51 hal kernel: [ 1.685636] pci 0000:02:00.0: reg 14: [mem 0xfeb40000-0xfeb5ffff]
Dec 7 14:44:51 hal kernel: [ 1.685644] pci 0000:02:00.0: reg 18: [io 0xe400-0xe41f]
Dec 7 14:44:51 hal kernel: [ 1.685652] pci 0000:02:00.0: reg 1c: [mem 0xfeb1c000-0xfeb1ffff]
Dec 7 14:44:51 hal kernel: [ 1.685673] pci 0000:02:00.0: reg 30: [mem 0xfeb20000-0xfeb3ffff pref]
Dec 7 14:44:51 hal kernel: [ 1.685704] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Dec 7 14:44:51 hal kernel: [ 1.685707] pci 0000:02:00.0: PME# disabled
Dec 7 14:44:51 hal kernel: [ 1.685740] pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.685758] pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.685797] pci 0000:02:00.1: reg 10: [mem 0xfebe0000-0xfebfffff]
Dec 7 14:44:51 hal kernel: [ 1.685805] pci 0000:02:00.1: reg 14: [mem 0xfebc0000-0xfebdffff]
Dec 7 14:44:51 hal kernel: [ 1.685814] pci 0000:02:00.1: reg 18: [io 0xe800-0xe81f]
Dec 7 14:44:51 hal kernel: [ 1.685822] pci 0000:02:00.1: reg 1c: [mem 0xfeb9c000-0xfeb9ffff]
Dec 7 14:44:51 hal kernel: [ 1.685843] pci 0000:02:00.1: reg 30: [mem 0xfeba0000-0xfebbffff pref]
Dec 7 14:44:51 hal kernel: [ 1.685873] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
Dec 7 14:44:51 hal kernel: [ 1.685876] pci 0000:02:00.1: PME# disabled
Dec 7 14:44:51 hal kernel: [ 1.685906] pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.685923] pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.690019] pci 0000:00:04.0: PCI bridge to [bus 02-02]
Dec 7 14:44:51 hal kernel: [ 1.690121] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
Dec 7 14:44:51 hal kernel: [ 1.690124] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
Dec 7 14:44:51 hal kernel: [ 1.690128] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Dec 7 14:44:51 hal kernel: [ 1.690183] pci 0000:01:04.0: reg 10: [mem 0xfc000000-0xfcffffff pref]
Dec 7 14:44:51 hal kernel: [ 1.690198] pci 0000:01:04.0: reg 14: [mem 0xfdffc000-0xfdffffff]
Dec 7 14:44:51 hal kernel: [ 1.690210] pci 0000:01:04.0: reg 18: [mem 0xfe000000-0xfe7fffff]
Dec 7 14:44:51 hal kernel: [ 1.690320] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
Dec 7 14:44:51 hal kernel: [ 1.690424] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
Dec 7 14:44:51 hal kernel: [ 1.690429] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff]
Dec 7 14:44:51 hal kernel: [ 1.690433] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref]
Dec 7 14:44:51 hal kernel: [ 1.690436] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Dec 7 14:44:51 hal kernel: [ 1.690439] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
Dec 7 14:44:51 hal kernel: [ 1.690442] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Dec 7 14:44:51 hal kernel: [ 1.690444] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
Dec 7 14:44:51 hal kernel: [ 1.690447] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
Dec 7 14:44:51 hal kernel: [ 1.690450] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
Dec 7 14:44:51 hal kernel: [ 1.690462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec 7 14:44:51 hal kernel: [ 1.690661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
Dec 7 14:44:51 hal kernel: [ 1.690704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
Dec 7 14:44:51 hal kernel: [ 1.700310] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
Dec 7 14:44:51 hal kernel: [ 1.700696] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
Dec 7 14:44:51 hal kernel: [ 1.701309] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *7 10 11 12 14 15)
Dec 7 14:44:51 hal kernel: [ 1.703677] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
Dec 7 14:44:51 hal kernel: [ 1.704290] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15)
Dec 7 14:44:51 hal kernel: [ 1.704899] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
Dec 7 14:44:51 hal kernel: [ 1.705643] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
Dec 7 14:44:51 hal kernel: [ 1.706252] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
Dec 7 14:44:51 hal kernel: [ 1.706971] HEST: HEST table parsing is initialized.
Dec 7 14:44:51 hal kernel: [ 1.706971] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
Dec 7 14:44:51 hal kernel: [ 1.706971] vgaarb: loaded
Dec 7 14:44:51 hal kernel: [ 1.706971] PCI: Using ACPI for IRQ routing
Dec 7 14:44:51 hal kernel: [ 1.706971] PCI: pci_cache_line_size set to 64 bytes
Dec 7 14:44:51 hal kernel: [ 1.706971] reserve RAM buffer: 0000000000096800 - 000000000009ffff
Dec 7 14:44:51 hal kernel: [ 1.706971] reserve RAM buffer: 00000000dfe90000 - 00000000dfffffff
Dec 7 14:44:51 hal kernel: [ 1.706971] NetLabel: Initializing
Dec 7 14:44:51 hal kernel: [ 1.706971] NetLabel: domain hash size = 128
Dec 7 14:44:51 hal kernel: [ 1.706971] NetLabel: protocols = UNLABELED CIPSOv4
Dec 7 14:44:51 hal kernel: [ 1.710018] NetLabel: unlabeled traffic allowed by default
Dec 7 14:44:51 hal kernel: [ 1.710122] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Dec 7 14:44:51 hal kernel: [ 1.710485] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Dec 7 14:44:51 hal kernel: [ 1.712628] Switching to clocksource tsc
Dec 7 14:44:51 hal kernel: [ 1.712841] pnp: PnP ACPI init
Dec 7 14:44:51 hal kernel: [ 1.712841] ACPI: bus type pnp registered
Dec 7 14:44:51 hal kernel: [ 1.715907] pnp: PnP ACPI: found 16 devices
Dec 7 14:44:51 hal kernel: [ 1.716000] ACPI: ACPI bus type pnp unregistered
Dec 7 14:44:51 hal kernel: [ 1.716107] system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.716212] system 00:08: [io 0x0a10-0x0a1f] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.716315] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
Dec 7 14:44:51 hal kernel: [ 1.716417] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.716520] system 00:0b: [io 0x0ca2-0x0ca3] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.716619] system 00:0b: [io 0x0550-0x0551] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.716723] system 00:0b: [io 0x04d0-0x04d1] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.716823] system 00:0b: [io 0x040b] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.716919] system 00:0b: [io 0x04d6] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717017] system 00:0b: [io 0x0c00-0x0c01] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717115] system 00:0b: [io 0x0c14] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717212] system 00:0b: [io 0x0c50-0x0c51] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717310] system 00:0b: [io 0x0c52] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717406] system 00:0b: [io 0x0c6c] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717502] system 00:0b: [io 0x0c6f] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717598] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717697] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717795] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717893] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.717991] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718090] system 00:0b: [io 0x0800-0x089f] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718188] system 00:0b: [io 0x0b00-0x0b0f] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718286] system 00:0b: [io 0x0b20-0x0b3f] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718384] system 00:0b: [io 0x0900-0x090f] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718482] system 00:0b: [io 0x0910-0x091f] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718581] system 00:0b: [io 0xfe00-0xfefe] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718680] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718781] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718884] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.718988] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
Dec 7 14:44:51 hal kernel: [ 1.719089] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
Dec 7 14:44:51 hal kernel: [ 1.719190] system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
Dec 7 14:44:51 hal kernel: [ 1.733923] pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.733936] pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.733947] pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.733959] pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.733970] pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.733981] pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.733992] pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734004] pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734015] pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734026] pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734037] pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734048] pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734052] pci 0000:02:00.0: BAR 7: can't assign mem (size 0x20000)
Dec 7 14:44:51 hal kernel: [ 1.734165] pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734176] pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734179] pci 0000:02:00.0: BAR 10: can't assign mem (size 0x20000)
Dec 7 14:44:51 hal kernel: [ 1.734288] pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734299] pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734301] pci 0000:02:00.1: BAR 7: can't assign mem (size 0x20000)
Dec 7 14:44:51 hal kernel: [ 1.734410] pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734421] pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
Dec 7 14:44:51 hal kernel: [ 1.734423] pci 0000:02:00.1: BAR 10: can't assign mem (size 0x20000)
Dec 7 14:44:51 hal kernel: [ 1.734523] pci 0000:00:04.0: PCI bridge to [bus 02-02]
Dec 7 14:44:51 hal kernel: [ 1.734619] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
Dec 7 14:44:51 hal kernel: [ 1.734718] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
Dec 7 14:44:51 hal kernel: [ 1.734819] pci 0000:00:04.0: bridge window [mem pref disabled]
Dec 7 14:44:51 hal kernel: [ 1.734919] pci 0000:00:14.4: PCI bridge to [bus 01-01]
Dec 7 14:44:51 hal kernel: [ 1.735016] pci 0000:00:14.4: bridge window [io disabled]
Dec 7 14:44:51 hal kernel: [ 1.735115] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff]
Dec 7 14:44:51 hal kernel: [ 1.735218] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref]
Dec 7 14:44:51 hal kernel: [ 1.735360] alloc irq_desc for 16 on node 0
Dec 7 14:44:51 hal kernel: [ 1.735364] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 1.735375] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 7 14:44:51 hal kernel: [ 1.735477] pci 0000:00:04.0: setting latency timer to 64
Dec 7 14:44:51 hal kernel: [ 1.735485] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Dec 7 14:44:51 hal kernel: [ 1.735487] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Dec 7 14:44:51 hal kernel: [ 1.735489] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Dec 7 14:44:51 hal kernel: [ 1.735492] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
Dec 7 14:44:51 hal kernel: [ 1.735494] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
Dec 7 14:44:51 hal kernel: [ 1.735496] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff]
Dec 7 14:44:51 hal kernel: [ 1.735498] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
Dec 7 14:44:51 hal kernel: [ 1.735500] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
Dec 7 14:44:51 hal kernel: [ 1.735503] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfe7fffff]
Dec 7 14:44:51 hal kernel: [ 1.735505] pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfcffffff pref]
Dec 7 14:44:51 hal kernel: [ 1.735507] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
Dec 7 14:44:51 hal kernel: [ 1.735509] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
Dec 7 14:44:51 hal kernel: [ 1.735512] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
Dec 7 14:44:51 hal kernel: [ 1.735514] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
Dec 7 14:44:51 hal kernel: [ 1.735516] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff]
Dec 7 14:44:51 hal kernel: [ 1.735518] pci_bus 0000:01: resource 9 [mem 0xfed40000-0xfed44fff]
Dec 7 14:44:51 hal kernel: [ 1.735558] NET: Registered protocol family 2
Dec 7 14:44:51 hal kernel: [ 1.736151] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
Dec 7 14:44:51 hal kernel: [ 1.738411] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Dec 7 14:44:51 hal kernel: [ 1.741417] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Dec 7 14:44:51 hal kernel: [ 1.741883] TCP: Hash tables configured (established 524288 bind 65536)
Dec 7 14:44:51 hal kernel: [ 1.741983] TCP reno registered
Dec 7 14:44:51 hal kernel: [ 1.742183] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
Dec 7 14:44:51 hal kernel: [ 1.742836] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
Dec 7 14:44:51 hal kernel: [ 1.743573] NET: Registered protocol family 1
Dec 7 14:44:51 hal kernel: [ 2.506807] pci 0000:01:04.0: Boot video device
Dec 7 14:44:51 hal kernel: [ 2.506813] PCI: CLS 64 bytes, default 64
Dec 7 14:44:51 hal kernel: [ 2.506875] Trying to unpack rootfs image as initramfs...
Dec 7 14:44:51 hal kernel: [ 2.637501] rootfs image is not initramfs (no cpio magic); looks like an initrd
Dec 7 14:44:51 hal kernel: [ 2.638354] Freeing initrd memory: 756k freed
Dec 7 14:44:51 hal kernel: [ 2.638722] pci 0000:00:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 7 14:44:51 hal kernel: [ 2.639213] alloc irq_desc for 40 on node 0
Dec 7 14:44:51 hal kernel: [ 2.639216] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 2.639224] pci 0000:00:00.2: irq 40 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 2.639242] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40
Dec 7 14:44:51 hal kernel: [ 2.648960] AMD-Vi: Lazy IO/TLB flushing enabled
Dec 7 14:44:51 hal kernel: [ 2.664754] Scanning for low memory corruption every 60 seconds
Dec 7 14:44:51 hal kernel: [ 2.665579] audit: initializing netlink socket (disabled)
Dec 7 14:44:51 hal kernel: [ 2.665687] type=2000 audit(1291729474.663:1): initialized
Dec 7 14:44:51 hal kernel: [ 2.691385] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Dec 7 14:44:51 hal kernel: [ 2.704817] VFS: Disk quotas dquot_6.5.2
Dec 7 14:44:51 hal kernel: [ 2.705070] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Dec 7 14:44:51 hal kernel: [ 2.705367] ROMFS MTD (C) 2007 Red Hat, Inc.
Dec 7 14:44:51 hal kernel: [ 2.705598] msgmni has been set to 32768
Dec 7 14:44:51 hal kernel: [ 2.706616] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Dec 7 14:44:51 hal kernel: [ 2.706754] io scheduler noop registered
Dec 7 14:44:51 hal kernel: [ 2.706845] io scheduler deadline registered
Dec 7 14:44:51 hal kernel: [ 2.707183] io scheduler cfq registered (default)
Dec 7 14:44:51 hal kernel: [ 2.708796] APEI: Can not request iomem region <00000000dfec60ea-00000000dfec60ec> for GARs.
Dec 7 14:44:51 hal kernel: [ 2.784506] Linux agpgart interface v0.103
Dec 7 14:44:51 hal kernel: [ 2.784715] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Dec 7 14:44:51 hal kernel: [ 3.056846] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 7 14:44:51 hal kernel: [ 3.330174] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Dec 7 14:44:51 hal kernel: [ 3.351777] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 7 14:44:51 hal kernel: [ 3.372821] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Dec 7 14:44:51 hal kernel: [ 3.377581] brd: module loaded
Dec 7 14:44:51 hal kernel: [ 3.377894] Fixed MDIO Bus: probed
Dec 7 14:44:51 hal kernel: [ 3.378214] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Dec 7 14:44:51 hal kernel: [ 3.378318] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Dec 7 14:44:51 hal kernel: [ 3.379227] serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 7 14:44:51 hal kernel: [ 3.379737] mice: PS/2 mouse device common for all mice
Dec 7 14:44:51 hal kernel: [ 3.379975] rtc_cmos 00:04: RTC can wake from S4
Dec 7 14:44:51 hal kernel: [ 3.380227] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Dec 7 14:44:51 hal kernel: [ 3.380360] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Dec 7 14:44:51 hal kernel: [ 3.380557] cpuidle: using governor ladder
Dec 7 14:44:51 hal kernel: [ 3.380656] cpuidle: using governor menu
Dec 7 14:44:51 hal kernel: [ 3.381032] TCP cubic registered
Dec 7 14:44:51 hal kernel: [ 3.381851] NET: Registered protocol family 10
Dec 7 14:44:51 hal kernel: [ 3.382772] lo: Disabled Privacy Extensions
Dec 7 14:44:51 hal kernel: [ 3.382897] Mobile IPv6
Dec 7 14:44:51 hal kernel: [ 3.382984] NET: Registered protocol family 17
Dec 7 14:44:51 hal kernel: [ 3.383186] Registering the dns_resolver key type
Dec 7 14:44:51 hal kernel: [ 3.383729] TuxOnIce: Ignoring late initcall, as requested.
Dec 7 14:44:51 hal kernel: [ 3.383844] registered taskstats version 1
Dec 7 14:44:51 hal kernel: [ 3.384467] rtc_cmos 00:04: setting system clock to 2010-12-07 13:44:36 UTC (1291729476)
Dec 7 14:44:51 hal kernel: [ 3.384644] Initalizing network drop monitor service
Dec 7 14:44:51 hal kernel: [ 3.407096] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Dec 7 14:44:51 hal kernel: [ 3.407308] RAMDISK: lzma image found at block 0
Dec 7 14:44:51 hal kernel: [ 3.541687] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
Dec 7 14:44:51 hal kernel: [ 3.561862] SCSI subsystem initialized
Dec 7 14:44:51 hal kernel: [ 3.578284] libata version 3.00 loaded.
Dec 7 14:44:51 hal kernel: [ 3.586137] ahci 0000:00:11.0: version 3.0
Dec 7 14:44:51 hal kernel: [ 3.586164] alloc irq_desc for 22 on node 0
Dec 7 14:44:51 hal kernel: [ 3.586169] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 3.586176] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Dec 7 14:44:51 hal kernel: [ 3.586738] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
Dec 7 14:44:51 hal kernel: [ 3.586871] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
Dec 7 14:44:51 hal kernel: [ 3.587325] scsi0 : ahci
Dec 7 14:44:51 hal kernel: [ 3.587963] scsi1 : ahci
Dec 7 14:44:51 hal kernel: [ 3.588323] scsi2 : ahci
Dec 7 14:44:51 hal kernel: [ 3.590143] scsi3 : ahci
Dec 7 14:44:51 hal kernel: [ 3.590451] ata1: SATA max UDMA/133 abar m1024@0xfeafa400 port 0xfeafa500 irq 22
Dec 7 14:44:51 hal kernel: [ 3.590583] ata2: SATA max UDMA/133 abar m1024@0xfeafa400 port 0xfeafa580 irq 22
Dec 7 14:44:51 hal kernel: [ 3.590712] ata3: SATA max UDMA/133 abar m1024@0xfeafa400 port 0xfeafa600 irq 22
Dec 7 14:44:51 hal kernel: [ 3.590841] ata4: SATA max UDMA/133 abar m1024@0xfeafa400 port 0xfeafa680 irq 22
Dec 7 14:44:51 hal kernel: [ 4.076767] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 7 14:44:51 hal kernel: [ 4.076773] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 7 14:44:51 hal kernel: [ 4.076778] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 7 14:44:51 hal kernel: [ 4.076812] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 7 14:44:51 hal kernel: [ 4.077676] ata3.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
Dec 7 14:44:51 hal kernel: [ 4.077680] ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
Dec 7 14:44:51 hal kernel: [ 4.077684] ata4.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
Dec 7 14:44:51 hal kernel: [ 4.077688] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Dec 7 14:44:51 hal kernel: [ 4.077692] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Dec 7 14:44:51 hal kernel: [ 4.078084] ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
Dec 7 14:44:51 hal kernel: [ 4.078087] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Dec 7 14:44:51 hal kernel: [ 4.078410] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Dec 7 14:44:51 hal kernel: [ 4.078632] ata4.00: configured for UDMA/133
Dec 7 14:44:51 hal kernel: [ 4.078651] ata2.00: configured for UDMA/133
Dec 7 14:44:51 hal kernel: [ 4.079039] ata1.00: configured for UDMA/133
Dec 7 14:44:51 hal kernel: [ 4.079448] ata3.00: configured for UDMA/133
Dec 7 14:44:51 hal kernel: [ 4.090298] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
Dec 7 14:44:51 hal kernel: [ 4.091299] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
Dec 7 14:44:51 hal kernel: [ 4.092249] scsi 2:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
Dec 7 14:44:51 hal kernel: [ 4.093221] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
Dec 7 14:44:51 hal kernel: [ 4.115839] md: raid1 personality registered for level 1
Dec 7 14:44:51 hal kernel: [ 4.121257] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Dec 7 14:44:51 hal kernel: [ 4.121458] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Dec 7 14:44:51 hal kernel: [ 4.121570] sd 0:0:0:0: [sda] Write Protect is off
Dec 7 14:44:51 hal kernel: [ 4.121574] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 7 14:44:51 hal kernel: [ 4.121617] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 14:44:51 hal kernel: [ 4.121716] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Dec 7 14:44:51 hal kernel: [ 4.121835] sd 2:0:0:0: [sdc] Write Protect is off
Dec 7 14:44:51 hal kernel: [ 4.121839] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Dec 7 14:44:51 hal kernel: [ 4.121843] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Dec 7 14:44:51 hal kernel: [ 4.121880] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 14:44:51 hal kernel: [ 4.121938] sd 3:0:0:0: [sdd] Write Protect is off
Dec 7 14:44:51 hal kernel: [ 4.121941] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Dec 7 14:44:51 hal kernel: [ 4.121985] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 14:44:51 hal kernel: [ 4.122580] sd 1:0:0:0: [sdb] Write Protect is off
Dec 7 14:44:51 hal kernel: [ 4.122677] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Dec 7 14:44:51 hal kernel: [ 4.122693] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 14:44:51 hal kernel: [ 4.140645] sda: sda1 sda2 sda3 sda4
Dec 7 14:44:51 hal kernel: [ 4.141691] sd 0:0:0:0: [sda] Attached SCSI disk
Dec 7 14:44:51 hal kernel: [ 4.145626] sdd: sdd1 sdd2 sdd3 sdd4
Dec 7 14:44:51 hal kernel: [ 4.146657] sd 3:0:0:0: [sdd] Attached SCSI disk
Dec 7 14:44:51 hal kernel: [ 4.148087] sdc: sdc1 sdc2 sdc3 sdc4
Dec 7 14:44:51 hal kernel: [ 4.149118] sd 2:0:0:0: [sdc] Attached SCSI disk
Dec 7 14:44:51 hal kernel: [ 4.155151] sdb: sdb1 sdb2 sdb3 sdb4
Dec 7 14:44:51 hal kernel: [ 4.156063] sd 1:0:0:0: [sdb] Attached SCSI disk
Dec 7 14:44:51 hal kernel: [ 4.291917] md: md0 stopped.
Dec 7 14:44:51 hal kernel: [ 4.294394] md: bind<sdb1>
Dec 7 14:44:51 hal kernel: [ 4.294709] md: bind<sdc1>
Dec 7 14:44:51 hal kernel: [ 4.295034] md: bind<sdd1>
Dec 7 14:44:51 hal kernel: [ 4.295346] md: bind<sda1>
Dec 7 14:44:51 hal kernel: [ 4.295731] md/raid1:md0: active with 4 out of 4 mirrors
Dec 7 14:44:51 hal kernel: [ 4.295863] md0: detected capacity change from 0 to 8192262144
Dec 7 14:44:51 hal kernel: [ 4.298923] md0: unknown partition table
Dec 7 14:44:51 hal kernel: [ 4.317263] EXT3-fs: barriers not enabled
Dec 7 14:44:51 hal kernel: [ 4.338429] kjournald starting. Commit interval 5 seconds
Dec 7 14:44:51 hal kernel: [ 4.338454] EXT3-fs (md0): mounted filesystem with writeback data mode
Dec 7 14:44:51 hal kernel: [ 4.338470] VFS: Mounted root (ext3 filesystem) readonly on device 9:0.
Dec 7 14:44:51 hal kernel: [ 4.338472] Trying to move old root to /initrd ... okay
Dec 7 14:44:51 hal kernel: [ 4.383651] devtmpfs: mounted
Dec 7 14:44:51 hal kernel: [ 4.383986] Freeing unused kernel memory: 484k freed
Dec 7 14:44:51 hal kernel: [ 6.174967] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Dec 7 14:44:51 hal kernel: [ 6.174974] ACPI: Power Button [PWRB]
Dec 7 14:44:51 hal kernel: [ 6.175025] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Dec 7 14:44:51 hal kernel: [ 6.175028] ACPI: Power Button [PWRF]
Dec 7 14:44:51 hal kernel: [ 6.177454] ACPI: acpi_idle registered with cpuidle
Dec 7 14:44:51 hal kernel: [ 6.261502] input: PC Speaker as /devices/platform/pcspkr/input/input3
Dec 7 14:44:51 hal kernel: [ 6.312959] sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 7 14:44:51 hal kernel: [ 6.313054] sd 1:0:0:0: Attached scsi generic sg1 type 0
Dec 7 14:44:51 hal kernel: [ 6.313149] sd 2:0:0:0: Attached scsi generic sg2 type 0
Dec 7 14:44:51 hal kernel: [ 6.313217] sd 3:0:0:0: Attached scsi generic sg3 type 0
Dec 7 14:44:51 hal kernel: [ 6.326841] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Dec 7 14:44:51 hal kernel: [ 6.327941] GHES: Generic hardware error source: 0 notified via NMI is not supported!
Dec 7 14:44:51 hal kernel: [ 6.349200] usbcore: registered new interface driver usbfs
Dec 7 14:44:51 hal kernel: [ 6.349242] usbcore: registered new interface driver hub
Dec 7 14:44:51 hal kernel: [ 6.349320] usbcore: registered new device driver usb
Dec 7 14:44:51 hal kernel: [ 6.356780] EDAC MC: Ver: 2.1.0 Dec 2 2010
Dec 7 14:44:51 hal kernel: [ 6.356905] GHES: Generic hardware error source: 1 notified via POLL is not supported!
Dec 7 14:44:51 hal kernel: [ 6.357944] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Dec 7 14:44:51 hal kernel: [ 6.371095] Uniform Multi-Platform E-IDE driver
Dec 7 14:44:51 hal kernel: [ 6.372537] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Dec 7 14:44:51 hal kernel: [ 6.373703] EDAC amd64_edac: Ver: 3.3.0 Dec 2 2010
Dec 7 14:44:51 hal kernel: [ 6.373877] EDAC amd64: ECC is enabled by BIOS.
Dec 7 14:44:51 hal kernel: [ 6.373989] EDAC amd64: ECC is enabled by BIOS.
Dec 7 14:44:51 hal kernel: [ 6.374139] EDAC amd64: ECC is enabled by BIOS.
Dec 7 14:44:51 hal kernel: [ 6.374311] EDAC amd64: ECC is enabled by BIOS.
Dec 7 14:44:51 hal kernel: [ 6.374439] EDAC MC: F10h CPU detected
Dec 7 14:44:51 hal kernel: [ 6.374454] EDAC amd64: using x8 syndromes.
Dec 7 14:44:51 hal kernel: [ 6.374456] EDAC MC: DCT0 chip selects:
Dec 7 14:44:51 hal kernel: [ 6.374459] EDAC MC: 0: 2048MB 1: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374461] EDAC MC: 2: 2048MB 3: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374463] EDAC MC: 4: 0MB 5: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374465] EDAC MC: 6: 0MB 7: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374467] EDAC MC: DCT1 chip selects:
Dec 7 14:44:51 hal kernel: [ 6.374469] EDAC MC: 0: 2048MB 1: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374471] EDAC MC: 2: 2048MB 3: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374472] EDAC MC: 4: 0MB 5: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374474] EDAC MC: 6: 0MB 7: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374542] EDAC MC0: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:18.2
Dec 7 14:44:51 hal kernel: [ 6.374544] EDAC MC: F10h CPU detected
Dec 7 14:44:51 hal kernel: [ 6.374558] EDAC amd64: using x8 syndromes.
Dec 7 14:44:51 hal kernel: [ 6.374560] EDAC MC: DCT0 chip selects:
Dec 7 14:44:51 hal kernel: [ 6.374561] EDAC MC: 0: 2048MB 1: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374563] EDAC MC: 2: 2048MB 3: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374565] EDAC MC: 4: 0MB 5: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374567] EDAC MC: 6: 0MB 7: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374568] EDAC MC: DCT1 chip selects:
Dec 7 14:44:51 hal kernel: [ 6.374570] EDAC MC: 0: 2048MB 1: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374572] EDAC MC: 2: 2048MB 3: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374573] EDAC MC: 4: 0MB 5: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374575] EDAC MC: 6: 0MB 7: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374714] EDAC MC1: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:19.2
Dec 7 14:44:51 hal kernel: [ 6.374717] EDAC MC: F10h CPU detected
Dec 7 14:44:51 hal kernel: [ 6.374731] EDAC amd64: using x8 syndromes.
Dec 7 14:44:51 hal kernel: [ 6.374732] EDAC MC: DCT0 chip selects:
Dec 7 14:44:51 hal kernel: [ 6.374735] EDAC MC: 0: 2048MB 1: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374737] EDAC MC: 2: 2048MB 3: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374738] EDAC MC: 4: 0MB 5: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374740] EDAC MC: 6: 0MB 7: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374742] EDAC MC: DCT1 chip selects:
Dec 7 14:44:51 hal kernel: [ 6.374744] EDAC MC: 0: 2048MB 1: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374746] EDAC MC: 2: 2048MB 3: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.374747] EDAC MC: 4: 0MB 5: 0MB
Dec 7 14:44:51 hal kernel: [ 6.374749] EDAC MC: 6: 0MB 7: 0MB
Dec 7 14:44:51 hal kernel: [ 6.375178] EDAC MC2: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:1a.2
Dec 7 14:44:51 hal kernel: [ 6.375182] EDAC MC: F10h CPU detected
Dec 7 14:44:51 hal kernel: [ 6.375198] EDAC amd64: using x8 syndromes.
Dec 7 14:44:51 hal kernel: [ 6.375200] EDAC MC: DCT0 chip selects:
Dec 7 14:44:51 hal kernel: [ 6.375203] EDAC MC: 0: 2048MB 1: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.375205] EDAC MC: 2: 2048MB 3: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.375207] EDAC MC: 4: 0MB 5: 0MB
Dec 7 14:44:51 hal kernel: [ 6.375209] EDAC MC: 6: 0MB 7: 0MB
Dec 7 14:44:51 hal kernel: [ 6.375210] EDAC MC: DCT1 chip selects:
Dec 7 14:44:51 hal kernel: [ 6.375212] EDAC MC: 0: 2048MB 1: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.375214] EDAC MC: 2: 2048MB 3: 2048MB
Dec 7 14:44:51 hal kernel: [ 6.375216] EDAC MC: 4: 0MB 5: 0MB
Dec 7 14:44:51 hal kernel: [ 6.375217] EDAC MC: 6: 0MB 7: 0MB
Dec 7 14:44:51 hal kernel: [ 6.375681] EDAC MC3: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:1b.2
Dec 7 14:44:51 hal kernel: [ 6.375761] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
Dec 7 14:44:51 hal kernel: [ 6.473958] dca service started, version 1.12.1
Dec 7 14:44:51 hal kernel: [ 6.482136] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 7 14:44:51 hal kernel: [ 6.482232] alloc irq_desc for 17 on node 0
Dec 7 14:44:51 hal kernel: [ 6.482235] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.482243] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Dec 7 14:44:51 hal kernel: [ 6.482364] ehci_hcd 0000:00:12.2: EHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 6.482402] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
Dec 7 14:44:51 hal kernel: [ 6.482443] ehci_hcd 0000:00:12.2: debug port 1
Dec 7 14:44:51 hal kernel: [ 6.482467] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeafa800
Dec 7 14:44:51 hal kernel: [ 6.490031] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
Dec 7 14:44:51 hal kernel: [ 6.490062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Dec 7 14:44:51 hal kernel: [ 6.490065] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 7 14:44:51 hal kernel: [ 6.490068] usb usb1: Product: EHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 6.490071] usb usb1: Manufacturer: Linux 2.6.36.1-3 ehci_hcd
Dec 7 14:44:51 hal kernel: [ 6.490074] usb usb1: SerialNumber: 0000:00:12.2
Dec 7 14:44:51 hal kernel: [ 6.493529] hub 1-0:1.0: USB hub found
Dec 7 14:44:51 hal kernel: [ 6.493539] hub 1-0:1.0: 6 ports detected
Dec 7 14:44:51 hal kernel: [ 6.495115] alloc irq_desc for 19 on node 0
Dec 7 14:44:51 hal kernel: [ 6.495122] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.495129] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Dec 7 14:44:51 hal kernel: [ 6.495166] ehci_hcd 0000:00:13.2: EHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 6.495191] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
Dec 7 14:44:51 hal kernel: [ 6.495228] ehci_hcd 0000:00:13.2: debug port 1
Dec 7 14:44:51 hal kernel: [ 6.495259] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfeafac00
Dec 7 14:44:51 hal kernel: [ 6.503417] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
Dec 7 14:44:51 hal kernel: [ 6.503486] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Dec 7 14:44:51 hal kernel: [ 6.503489] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 7 14:44:51 hal kernel: [ 6.503491] usb usb2: Product: EHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 6.503493] usb usb2: Manufacturer: Linux 2.6.36.1-3 ehci_hcd
Dec 7 14:44:51 hal kernel: [ 6.503495] usb usb2: SerialNumber: 0000:00:13.2
Dec 7 14:44:51 hal kernel: [ 6.504256] hub 2-0:1.0: USB hub found
Dec 7 14:44:51 hal kernel: [ 6.504261] hub 2-0:1.0: 6 ports detected
Dec 7 14:44:51 hal kernel: [ 6.504629] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
Dec 7 14:44:51 hal kernel: [ 6.504639] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 7 14:44:51 hal kernel: [ 6.504661] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
Dec 7 14:44:51 hal kernel: [ 6.504667] ide0: BM-DMA at 0xff00-0xff07
Dec 7 14:44:51 hal kernel: [ 6.504676] ide1: BM-DMA at 0xff08-0xff0f
Dec 7 14:44:51 hal kernel: [ 6.504681] Probing IDE interface ide0...
Dec 7 14:44:51 hal kernel: [ 6.555880] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Dec 7 14:44:51 hal kernel: [ 6.555883] Copyright (c) 2007-2009 Intel Corporation.
Dec 7 14:44:51 hal kernel: [ 6.556116] igb 0000:02:00.0: power state changed by ACPI to D0
Dec 7 14:44:51 hal kernel: [ 6.556195] igb 0000:02:00.0: power state changed by ACPI to D0
Dec 7 14:44:51 hal kernel: [ 6.556202] igb 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 7 14:44:51 hal kernel: [ 6.556215] igb 0000:02:00.0: setting latency timer to 64
Dec 7 14:44:51 hal kernel: [ 6.556522] alloc irq_desc for 41 on node 0
Dec 7 14:44:51 hal kernel: [ 6.556524] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.556529] igb 0000:02:00.0: irq 41 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.556531] alloc irq_desc for 42 on node 0
Dec 7 14:44:51 hal kernel: [ 6.556533] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.556535] igb 0000:02:00.0: irq 42 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.556537] alloc irq_desc for 43 on node 0
Dec 7 14:44:51 hal kernel: [ 6.556538] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.556540] igb 0000:02:00.0: irq 43 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.556542] alloc irq_desc for 44 on node 0
Dec 7 14:44:51 hal kernel: [ 6.556543] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.556546] igb 0000:02:00.0: irq 44 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.556547] alloc irq_desc for 45 on node 0
Dec 7 14:44:51 hal kernel: [ 6.556549] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.556551] igb 0000:02:00.0: irq 45 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.556552] alloc irq_desc for 46 on node 0
Dec 7 14:44:51 hal kernel: [ 6.556554] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.556556] igb 0000:02:00.0: irq 46 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.556558] alloc irq_desc for 47 on node 0
Dec 7 14:44:51 hal kernel: [ 6.556559] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.556561] igb 0000:02:00.0: irq 47 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.556563] alloc irq_desc for 48 on node 0
Dec 7 14:44:51 hal kernel: [ 6.556564] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.556566] igb 0000:02:00.0: irq 48 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.556568] alloc irq_desc for 49 on node 0
Dec 7 14:44:51 hal kernel: [ 6.556569] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.556571] igb 0000:02:00.0: irq 49 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.556612] igb 0000:02:00.0: 0 vfs allocated
Dec 7 14:44:51 hal kernel: [ 6.650840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 7 14:44:51 hal kernel: [ 6.739443] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
Dec 7 14:44:51 hal kernel: [ 6.739447] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:1d:0b:f6
Dec 7 14:44:51 hal kernel: [ 6.739526] igb 0000:02:00.0: eth0: PBA No: ffffff-0ff
Dec 7 14:44:51 hal kernel: [ 6.739528] igb 0000:02:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
Dec 7 14:44:51 hal kernel: [ 6.739748] igb 0000:02:00.1: power state changed by ACPI to D0
Dec 7 14:44:51 hal kernel: [ 6.739827] igb 0000:02:00.1: power state changed by ACPI to D0
Dec 7 14:44:51 hal kernel: [ 6.739835] igb 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Dec 7 14:44:51 hal kernel: [ 6.739848] igb 0000:02:00.1: setting latency timer to 64
Dec 7 14:44:51 hal kernel: [ 6.740163] alloc irq_desc for 50 on node 0
Dec 7 14:44:51 hal kernel: [ 6.740165] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.740170] igb 0000:02:00.1: irq 50 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.740172] alloc irq_desc for 51 on node 0
Dec 7 14:44:51 hal kernel: [ 6.740173] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.740176] igb 0000:02:00.1: irq 51 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.740178] alloc irq_desc for 52 on node 0
Dec 7 14:44:51 hal kernel: [ 6.740179] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.740181] igb 0000:02:00.1: irq 52 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.740183] alloc irq_desc for 53 on node 0
Dec 7 14:44:51 hal kernel: [ 6.740184] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.740187] igb 0000:02:00.1: irq 53 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.740188] alloc irq_desc for 54 on node 0
Dec 7 14:44:51 hal kernel: [ 6.740190] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.740192] igb 0000:02:00.1: irq 54 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.740194] alloc irq_desc for 55 on node 0
Dec 7 14:44:51 hal kernel: [ 6.740195] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.740197] igb 0000:02:00.1: irq 55 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.740199] alloc irq_desc for 56 on node 0
Dec 7 14:44:51 hal kernel: [ 6.740200] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.740203] igb 0000:02:00.1: irq 56 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.740204] alloc irq_desc for 57 on node 0
Dec 7 14:44:51 hal kernel: [ 6.740206] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.740208] igb 0000:02:00.1: irq 57 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.740210] alloc irq_desc for 58 on node 0
Dec 7 14:44:51 hal kernel: [ 6.740211] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 6.740213] igb 0000:02:00.1: irq 58 for MSI/MSI-X
Dec 7 14:44:51 hal kernel: [ 6.740254] igb 0000:02:00.1: 0 vfs allocated
Dec 7 14:44:51 hal kernel: [ 6.930433] igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
Dec 7 14:44:51 hal kernel: [ 6.930436] igb 0000:02:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:1d:0b:f7
Dec 7 14:44:51 hal kernel: [ 6.930515] igb 0000:02:00.1: eth1: PBA No: ffffff-0ff
Dec 7 14:44:51 hal kernel: [ 6.930517] igb 0000:02:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
Dec 7 14:44:51 hal kernel: [ 7.526730] hdb: DV-28S-V, ATAPI CD/DVD-ROM drive
Dec 7 14:44:51 hal kernel: [ 7.526778] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Dec 7 14:44:51 hal kernel: [ 7.530601] hdb: UDMA/100 mode selected
Dec 7 14:44:51 hal kernel: [ 7.531627] Probing IDE interface ide1...
Dec 7 14:44:51 hal kernel: [ 8.073451] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 7 14:44:51 hal kernel: [ 8.078995] ide1 at 0x170-0x177,0x376 on irq 15
Dec 7 14:44:51 hal kernel: [ 8.079259] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 7 14:44:51 hal kernel: [ 8.079318] ohci_hcd 0000:00:12.0: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.079334] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
Dec 7 14:44:51 hal kernel: [ 8.079374] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfeaf6000
Dec 7 14:44:51 hal kernel: [ 8.134106] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Dec 7 14:44:51 hal kernel: [ 8.134110] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 7 14:44:51 hal kernel: [ 8.134113] usb usb3: Product: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.134115] usb usb3: Manufacturer: Linux 2.6.36.1-3 ohci_hcd
Dec 7 14:44:51 hal kernel: [ 8.134117] usb usb3: SerialNumber: 0000:00:12.0
Dec 7 14:44:51 hal kernel: [ 8.134284] hub 3-0:1.0: USB hub found
Dec 7 14:44:51 hal kernel: [ 8.134295] hub 3-0:1.0: 3 ports detected
Dec 7 14:44:51 hal kernel: [ 8.134505] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 7 14:44:51 hal kernel: [ 8.134559] ohci_hcd 0000:00:12.1: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.134574] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
Dec 7 14:44:51 hal kernel: [ 8.134598] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfeaf7000
Dec 7 14:44:51 hal kernel: [ 8.190779] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Dec 7 14:44:51 hal kernel: [ 8.190782] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 7 14:44:51 hal kernel: [ 8.190784] usb usb4: Product: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.190786] usb usb4: Manufacturer: Linux 2.6.36.1-3 ohci_hcd
Dec 7 14:44:51 hal kernel: [ 8.190788] usb usb4: SerialNumber: 0000:00:12.1
Dec 7 14:44:51 hal kernel: [ 8.190907] hub 4-0:1.0: USB hub found
Dec 7 14:44:51 hal kernel: [ 8.190916] hub 4-0:1.0: 3 ports detected
Dec 7 14:44:51 hal kernel: [ 8.191111] alloc irq_desc for 18 on node 0
Dec 7 14:44:51 hal kernel: [ 8.191113] alloc kstat_irqs on node 0
Dec 7 14:44:51 hal kernel: [ 8.191119] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Dec 7 14:44:51 hal kernel: [ 8.191139] ohci_hcd 0000:00:13.0: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.191154] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
Dec 7 14:44:51 hal kernel: [ 8.191185] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeaf8000
Dec 7 14:44:51 hal kernel: [ 8.247439] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Dec 7 14:44:51 hal kernel: [ 8.247442] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 7 14:44:51 hal kernel: [ 8.247445] usb usb5: Product: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.247447] usb usb5: Manufacturer: Linux 2.6.36.1-3 ohci_hcd
Dec 7 14:44:51 hal kernel: [ 8.247448] usb usb5: SerialNumber: 0000:00:13.0
Dec 7 14:44:51 hal kernel: [ 8.247567] hub 5-0:1.0: USB hub found
Dec 7 14:44:51 hal kernel: [ 8.247576] hub 5-0:1.0: 3 ports detected
Dec 7 14:44:51 hal kernel: [ 8.247772] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Dec 7 14:44:51 hal kernel: [ 8.247791] ohci_hcd 0000:00:13.1: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.247806] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
Dec 7 14:44:51 hal kernel: [ 8.247830] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfeaf9000
Dec 7 14:44:51 hal kernel: [ 8.304114] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Dec 7 14:44:51 hal kernel: [ 8.304117] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 7 14:44:51 hal kernel: [ 8.304119] usb usb6: Product: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.304121] usb usb6: Manufacturer: Linux 2.6.36.1-3 ohci_hcd
Dec 7 14:44:51 hal kernel: [ 8.304123] usb usb6: SerialNumber: 0000:00:13.1
Dec 7 14:44:51 hal kernel: [ 8.304237] hub 6-0:1.0: USB hub found
Dec 7 14:44:51 hal kernel: [ 8.304247] hub 6-0:1.0: 3 ports detected
Dec 7 14:44:51 hal kernel: [ 8.304490] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Dec 7 14:44:51 hal kernel: [ 8.304544] ohci_hcd 0000:00:14.5: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.304558] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
Dec 7 14:44:51 hal kernel: [ 8.304581] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeafb000
Dec 7 14:44:51 hal kernel: [ 8.360768] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Dec 7 14:44:51 hal kernel: [ 8.360772] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 7 14:44:51 hal kernel: [ 8.360774] usb usb7: Product: OHCI Host Controller
Dec 7 14:44:51 hal kernel: [ 8.360776] usb usb7: Manufacturer: Linux 2.6.36.1-3 ohci_hcd
Dec 7 14:44:51 hal kernel: [ 8.360778] usb usb7: SerialNumber: 0000:00:14.5
Dec 7 14:44:51 hal kernel: [ 8.360894] hub 7-0:1.0: USB hub found
Dec 7 14:44:51 hal kernel: [ 8.360904] hub 7-0:1.0: 2 ports detected
Dec 7 14:44:51 hal kernel: [ 8.382726] ide-cd driver 5.00
Dec 7 14:44:51 hal kernel: [ 8.391222] ide-cd: hdb: ATAPI 24X DVD-ROM drive, 198kB Cache
Dec 7 14:44:51 hal kernel: [ 8.391228] cdrom: Uniform CD-ROM driver Revision: 3.20
Dec 7 14:44:51 hal kernel: [ 8.576728] usb 5-3: new full speed USB device using ohci_hcd and address 2
Dec 7 14:44:51 hal kernel: [ 8.734472] usb 5-3: New USB device found, idVendor=0557, idProduct=2221
Dec 7 14:44:51 hal kernel: [ 8.734475] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Dec 7 14:44:51 hal kernel: [ 8.734478] usb 5-3: Product: Hermon USB hidmouse Device
Dec 7 14:44:51 hal kernel: [ 8.734480] usb 5-3: Manufacturer: Winbond Electronics Corp
Dec 7 14:44:51 hal kernel: [ 8.761971] usbcore: registered new interface driver hiddev
Dec 7 14:44:51 hal kernel: [ 8.764686] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input4
Dec 7 14:44:51 hal kernel: [ 8.764821] generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input0
Dec 7 14:44:51 hal kernel: [ 8.768660] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input5
Dec 7 14:44:51 hal kernel: [ 8.768766] generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input1
Dec 7 14:44:51 hal kernel: [ 8.768785] usbcore: registered new interface driver usbhid
Dec 7 14:44:51 hal kernel: [ 8.768788] usbhid: USB HID core driver
Dec 7 14:44:51 hal kernel: [ 8.852984] Adding 32001476k swap on /dev/sda2. Priority:0 extents:1 across:32001476k
Dec 7 14:44:51 hal kernel: [ 8.861300] Adding 32001476k swap on /dev/sdb2. Priority:0 extents:1 across:32001476k
Dec 7 14:44:51 hal kernel: [ 8.869384] Adding 32001476k swap on /dev/sdc2. Priority:0 extents:1 across:32001476k
Dec 7 14:44:51 hal kernel: [ 8.877328] Adding 32001476k swap on /dev/sdd2. Priority:0 extents:1 across:32001476k
Dec 7 14:44:51 hal kernel: [ 9.064835] EXT3-fs (md0): using internal journal
Dec 7 14:44:51 hal kernel: [ 9.249553] aoe: AoE v47 initialised.
Dec 7 14:44:51 hal kernel: [ 9.315218] uvesafb: Matrox, MGA-G200, 00, OEM: Matrox Graphics Inc., VBE v3.0
Dec 7 14:44:51 hal kernel: [ 10.169609] uvesafb: VBIOS/hardware supports DDC2 transfers
Dec 7 14:44:51 hal kernel: [ 11.019855] uvesafb: monitor limits: vf = 160 Hz, hf = 98 kHz, clk = 230 MHz
Dec 7 14:44:51 hal kernel: [ 11.019978] uvesafb: scrolling: redraw
Dec 7 14:44:51 hal kernel: [ 12.337257] Console: switching to colour frame buffer device 160x64
Dec 7 14:44:51 hal kernel: [ 12.373226] uvesafb: framebuffer at 0xfc000000, mapped to 0xffffc90019000000, using 10240k, total 16384k
Dec 7 14:44:51 hal kernel: [ 12.373228] fb0: VESA VGA frame buffer device
Dec 7 14:44:51 hal kernel: [ 12.548523] device-mapper: uevent: version 1.0.3
Dec 7 14:44:51 hal kernel: [ 12.549177] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: [email protected]
Dec 7 14:44:51 hal kernel: [ 13.084182] md: md1 stopped.
Dec 7 14:44:51 hal kernel: [ 13.100590] md: bind<sdb3>
Dec 7 14:44:51 hal kernel: [ 13.100771] md: bind<sdc3>
Dec 7 14:44:51 hal kernel: [ 13.100979] md: bind<sdd3>
Dec 7 14:44:51 hal kernel: [ 13.101176] md: bind<sda3>
Dec 7 14:44:51 hal kernel: [ 13.113028] md: raid0 personality registered for level 0
Dec 7 14:44:51 hal kernel: [ 13.113158] md/raid0:md1: looking at sda3
Dec 7 14:44:51 hal kernel: [ 13.113161] md/raid0:md1: comparing sda3(1023996928) with sda3(1023996928)
Dec 7 14:44:51 hal kernel: [ 13.113165] md/raid0:md1: END
Dec 7 14:44:51 hal kernel: [ 13.113166] md/raid0:md1: ==> UNIQUE
Dec 7 14:44:51 hal kernel: [ 13.113168] md/raid0:md1: 1 zones
Dec 7 14:44:51 hal kernel: [ 13.113169] md/raid0:md1: looking at sdd3
Dec 7 14:44:51 hal kernel: [ 13.113171] md/raid0:md1: comparing sdd3(1023996928) with sda3(1023996928)
Dec 7 14:44:51 hal kernel: [ 13.113173] md/raid0:md1: EQUAL
Dec 7 14:44:51 hal kernel: [ 13.113175] md/raid0:md1: looking at sdc3
Dec 7 14:44:51 hal kernel: [ 13.113177] md/raid0:md1: comparing sdc3(1023996928) with sda3(1023996928)
Dec 7 14:44:51 hal kernel: [ 13.113179] md/raid0:md1: EQUAL
Dec 7 14:44:51 hal kernel: [ 13.113180] md/raid0:md1: looking at sdb3
Dec 7 14:44:51 hal kernel: [ 13.113182] md/raid0:md1: comparing sdb3(1023996928) with sda3(1023996928)
Dec 7 14:44:51 hal kernel: [ 13.113184] md/raid0:md1: EQUAL
Dec 7 14:44:51 hal kernel: [ 13.113186] md/raid0:md1: FINAL 1 zones
Dec 7 14:44:51 hal kernel: [ 13.113190] md/raid0:md1: done.
Dec 7 14:44:51 hal kernel: [ 13.113192] md/raid0:md1: md_size is 4095987712 sectors.
Dec 7 14:44:51 hal kernel: [ 13.113194] ******* md1 configuration *********
Dec 7 14:44:51 hal kernel: [ 13.113196] zone0=[sda3/sdb3/sdc3/sdd3/]
Dec 7 14:44:51 hal kernel: [ 13.113200] zone offset=0kb device offset=0kb size=2047993856kb
Dec 7 14:44:51 hal kernel: [ 13.113201] **********************************
Dec 7 14:44:51 hal kernel: [ 13.113202]
Dec 7 14:44:51 hal kernel: [ 13.113212] md1: detected capacity change from 0 to 2097145708544
Dec 7 14:44:51 hal kernel: [ 13.122110] md: md2 stopped.
Dec 7 14:44:51 hal kernel: [ 13.123222] md: bind<sdb4>
Dec 7 14:44:51 hal kernel: [ 13.123608] md: bind<sdc4>
Dec 7 14:44:51 hal kernel: [ 13.123881] md: bind<sdd4>
Dec 7 14:44:51 hal kernel: [ 13.124192] md: bind<sda4>
Dec 7 14:44:51 hal kernel: [ 13.133655] md: raid10 personality registered for level 10
Dec 7 14:44:51 hal kernel: [ 13.134318] md/raid10:md2: active with 4 out of 4 devices
Dec 7 14:44:51 hal kernel: [ 13.134350] md2: detected capacity change from 0 to 869902843904
Dec 7 14:44:51 hal kernel: [ 13.154594] md1: detected capacity change from 0 to 2097145708544
Dec 7 14:44:51 hal kernel: [ 13.165211] md1: unknown partition table
Dec 7 14:44:51 hal kernel: [ 13.182754] md2: detected capacity change from 0 to 869902843904
Dec 7 14:44:51 hal kernel: [ 13.198364] md2: unknown partition table
Dec 7 14:44:51 hal kernel: [ 13.922782] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
Dec 7 14:44:51 hal kernel: [ 14.058428] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
Dec 7 14:44:51 hal kernel: [ 14.732631] ip6_tables: (C) 2000-2006 Netfilter Core Team
Dec 7 14:44:51 hal kernel: [ 14.808064] ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 7 14:44:51 hal kernel: [ 14.887486] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Dec 7 14:44:51 hal kernel: [ 15.128010] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Dec 7 14:44:51 hal kernel: [ 15.636269] ADDRCONF(NETDEV_UP): eth1: link is not ready
Dec 7 14:44:51 hal kernel: [ 16.409179] RPC: Registered udp transport module.
Dec 7 14:44:51 hal kernel: [ 16.409183] RPC: Registered tcp transport module.
Dec 7 14:44:51 hal kernel: [ 16.409185] RPC: Registered tcp NFSv4.1 backchannel transport module.
Dec 7 14:44:51 hal kernel: [ 16.444459] Installing knfsd (copyright (C) 1996 [email protected]).
Dec 7 14:44:51 hal kernel: [ 16.863381] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Dec 7 14:44:51 hal kernel: [ 16.869651] NFSD: starting 90-second grace period
Dec 7 14:44:51 hal kernel: [ 17.407900] sshd (3241): /proc/3241/oom_adj is deprecated, please use /proc/3241/oom_score_adj instead.
Dec 7 14:44:51 hal kernel: [ 17.737206] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Dec 7 14:44:51 hal kernel: [ 17.739667] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Dec 7 13:45:08 hal kernel: [ 25.443395] eth0: no IPv6 routers present
Dec 7 13:45:11 hal kernel: [ 28.590079] eth1: no IPv6 routers present
Dec 7 13:45:23 hal kernel: [ 40.966157] FS-Cache: Loaded
Dec 7 13:45:23 hal kernel: [ 40.983919] FS-Cache: Netfs 'nfs' registered for caching

---

Attachments:

log.interrupts (8.87 kB)
log.dmesg (89.00 kB)
Download all attachments

2010-12-08 01:52:43

by Robert Hancock

[permalink] [raw]

Subject: Re: [2.6.36.1] IGB driver handles all ethX interrupts on single cpu core.

---

On 12/07/2010 12:06 PM, Paweł Sikora wrote:
> hi,
>
> i'm currently testing a new server with 2x opteron-6128 with dual gigabit port
> and observing that the igb driver uses only single core for all ethX interrupts.
> is it a correct behaviour for this driver?
>
> BR,
> Pawel.

The CPU affinity for the IRQ isn't really under the driver's control. It
looks like all your interrupts are being handled on CPU0. You likely
need to run the irqbalance daemon.

2010-12-08 07:45:57

by Paweł Sikora

[permalink] [raw]

Subject: Re: [2.6.36.1] IGB driver handles all ethX interrupts on single cpu core.

---

On Wednesday 08 of December 2010 02:44:25 Robert Hancock wrote:
> On 12/07/2010 12:06 PM, Paweł Sikora wrote:
> > hi,
> >
> > i'm currently testing a new server with 2x opteron-6128 with dual gigabit port
> > and observing that the igb driver uses only single core for all ethX interrupts.
> > is it a correct behaviour for this driver?
> >
> > BR,
> > Pawel.
>
> The CPU affinity for the IRQ isn't really under the driver's control. It
> looks like all your interrupts are being handled on CPU0. You likely
> need to run the irqbalance daemon.

ok, so why e.g. on one machine (dual amd opteron) irqbalance daemon is required
and on second machine (single intel quad-core) irqs are balanced w/o daemon?
this looks inconsistent to me.

$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 49 2 0 0 IO-APIC-edge timer
1: 0 1 0 1 IO-APIC-edge i8042
8: 13 11 12 13 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
12: 0 0 3 1 IO-APIC-edge i8042
16: 224 236 235 232 IO-APIC-fasteoi pata_marvell, uhci_hcd:usb3
17: 0 0 0 0 IO-APIC-fasteoi saa7133[0], saa7133[0]
18: 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb5, uhci_hcd:usb8
19: 695 672 660 630 IO-APIC-fasteoi uhci_hcd:usb7
21: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb4
23: 1 1 1 0 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb6
40: 3409 3446 3441 3403 PCI-MSI-edge ahci
41: 63 60 60 61 PCI-MSI-edge hda_intel
42: 3219 3180 3237 3192 PCI-MSI-edge radeon
43: 505 487 496 498 PCI-MSI-edge eth0
NMI: 11 7 12 8 Non-maskable interrupts
LOC: 14822 15293 17577 14404 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 11 7 12 8 Performance monitoring interrupts
PND: 0 0 0 0 Performance pending work
RES: 493 498 525 495 Rescheduling interrupts
CAL: 3975 248 2729 299 Function call interrupts
TLB: 937 1727 913 1600 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
ERR: 3
MIS: 0

2010-12-08 07:59:32

by Eric Dumazet

[permalink] [raw]

Subject: Re: [2.6.36.1] IGB driver handles all ethX interrupts on single cpu core.

---

Le mercredi 08 décembre 2010 à 08:45 +0100, Paweł Sikora a écrit :
> On Wednesday 08 of December 2010 02:44:25 Robert Hancock wrote:
> > On 12/07/2010 12:06 PM, Paweł Sikora wrote:
> > > hi,
> > >
> > > i'm currently testing a new server with 2x opteron-6128 with dual gigabit port
> > > and observing that the igb driver uses only single core for all ethX interrupts.
> > > is it a correct behaviour for this driver?
> > >
> > > BR,
> > > Pawel.
> >
> > The CPU affinity for the IRQ isn't really under the driver's control. It
> > looks like all your interrupts are being handled on CPU0. You likely
> > need to run the irqbalance daemon.
>
> ok, so why e.g. on one machine (dual amd opteron) irqbalance daemon is required
> and on second machine (single intel quad-core) irqs are balanced w/o daemon?
> this looks inconsistent to me.
>
> $ cat /proc/interrupts
> CPU0 CPU1 CPU2 CPU3
> 0: 49 2 0 0 IO-APIC-edge timer
> 1: 0 1 0 1 IO-APIC-edge i8042
> 8: 13 11 12 13 IO-APIC-edge rtc0
> 9: 0 0 0 0 IO-APIC-fasteoi acpi
> 12: 0 0 3 1 IO-APIC-edge i8042
> 16: 224 236 235 232 IO-APIC-fasteoi pata_marvell, uhci_hcd:usb3
> 17: 0 0 0 0 IO-APIC-fasteoi saa7133[0], saa7133[0]
> 18: 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb5, uhci_hcd:usb8
> 19: 695 672 660 630 IO-APIC-fasteoi uhci_hcd:usb7
> 21: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb4
> 23: 1 1 1 0 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb6
> 40: 3409 3446 3441 3403 PCI-MSI-edge ahci
> 41: 63 60 60 61 PCI-MSI-edge hda_intel
> 42: 3219 3180 3237 3192 PCI-MSI-edge radeon
> 43: 505 487 496 498 PCI-MSI-edge eth0


irqbalance is not required.

You can decide yourself of IRQ affinities

Given data you provided :

echo 0f >/proc/irq/*/eth0/../smp_affinity

If your IGB card has 4 queues and you want each queue serviced by a
given cpu :

echo 01 >/proc/irq/*/eth0-fp-0/../smp_affinity
echo 02 >/proc/irq/*/eth0-fp-1/../smp_affinity
echo 04 >/proc/irq/*/eth0-fp-2/../smp_affinity
echo 08 >/proc/irq/*/eth0-fp-3/../smp_affinity

Note 1 : If under load, NAPI is triggered and no anymore hardirqs
are delivered, so load stay on one ksoftirqd (one cpu),
no matter changes you make on /proc/irq/...

2010-12-08 15:22:29

by Robert Hancock

[permalink] [raw]

Subject: Re: [2.6.36.1] IGB driver handles all ethX interrupts on single cpu core.

---

2010/12/8 Pawe? Sikora <[email protected]>:
> On Wednesday 08 of December 2010 02:44:25 Robert Hancock wrote:
>> On 12/07/2010 12:06 PM, Pawe? Sikora wrote:
>> > hi,
>> >
>> > i'm currently testing a new server with 2x opteron-6128 with dual gigabit port
>> > and observing that the igb driver uses only single core for all ethX interrupts.
>> > is it a correct behaviour for this driver?
>> >
>> > BR,
>> > Pawel.
>>
>> The CPU affinity for the IRQ isn't really under the driver's control. It
>> looks like all your interrupts are being handled on CPU0. You likely
>> need to run the irqbalance daemon.
>
> ok, so why e.g. on one machine (dual amd opteron) irqbalance daemon is required
> and on second machine (single intel quad-core) irqs are balanced w/o daemon?
> this looks inconsistent to me.
>
> $ cat /proc/interrupts
> ? ? ? ? ? CPU0 ? ? ? CPU1 ? ? ? CPU2 ? ? ? CPU3
> ?0: ? ? ? ? 49 ? ? ? ? ?2 ? ? ? ? ?0 ? ? ? ? ?0 ? IO-APIC-edge ? ? ?timer
> ?1: ? ? ? ? ?0 ? ? ? ? ?1 ? ? ? ? ?0 ? ? ? ? ?1 ? IO-APIC-edge ? ? ?i8042
> ?8: ? ? ? ? 13 ? ? ? ? 11 ? ? ? ? 12 ? ? ? ? 13 ? IO-APIC-edge ? ? ?rtc0
> ?9: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? IO-APIC-fasteoi ? acpi
> ?12: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?3 ? ? ? ? ?1 ? IO-APIC-edge ? ? ?i8042
> ?16: ? ? ? ?224 ? ? ? ?236 ? ? ? ?235 ? ? ? ?232 ? IO-APIC-fasteoi ? pata_marvell, uhci_hcd:usb3
> ?17: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? IO-APIC-fasteoi ? saa7133[0], saa7133[0]
> ?18: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? IO-APIC-fasteoi ? ehci_hcd:usb1, uhci_hcd:usb5, uhci_hcd:usb8
> ?19: ? ? ? ?695 ? ? ? ?672 ? ? ? ?660 ? ? ? ?630 ? IO-APIC-fasteoi ? uhci_hcd:usb7
> ?21: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? IO-APIC-fasteoi ? uhci_hcd:usb4
> ?23: ? ? ? ? ?1 ? ? ? ? ?1 ? ? ? ? ?1 ? ? ? ? ?0 ? IO-APIC-fasteoi ? ehci_hcd:usb2, uhci_hcd:usb6
> ?40: ? ? ? 3409 ? ? ? 3446 ? ? ? 3441 ? ? ? 3403 ? PCI-MSI-edge ? ? ?ahci
> ?41: ? ? ? ? 63 ? ? ? ? 60 ? ? ? ? 60 ? ? ? ? 61 ? PCI-MSI-edge ? ? ?hda_intel
> ?42: ? ? ? 3219 ? ? ? 3180 ? ? ? 3237 ? ? ? 3192 ? PCI-MSI-edge ? ? ?radeon
> ?43: ? ? ? ?505 ? ? ? ?487 ? ? ? ?496 ? ? ? ?498 ? PCI-MSI-edge ? ? ?eth0
> NMI: ? ? ? ? 11 ? ? ? ? ?7 ? ? ? ? 12 ? ? ? ? ?8 ? Non-maskable interrupts
> LOC: ? ? ?14822 ? ? ?15293 ? ? ?17577 ? ? ?14404 ? Local timer interrupts
> SPU: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? Spurious interrupts
> PMI: ? ? ? ? 11 ? ? ? ? ?7 ? ? ? ? 12 ? ? ? ? ?8 ? Performance monitoring interrupts
> PND: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? Performance pending work
> RES: ? ? ? ?493 ? ? ? ?498 ? ? ? ?525 ? ? ? ?495 ? Rescheduling interrupts
> CAL: ? ? ? 3975 ? ? ? ?248 ? ? ? 2729 ? ? ? ?299 ? Function call interrupts
> TLB: ? ? ? ?937 ? ? ? 1727 ? ? ? ?913 ? ? ? 1600 ? TLB shootdowns
> TRM: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? Thermal event interrupts
> THR: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? Threshold APIC interrupts
> MCE: ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? ? ? ? ?0 ? Machine check exceptions
> MCP: ? ? ? ? ?2 ? ? ? ? ?2 ? ? ? ? ?2 ? ? ? ? ?2 ? Machine check polls
> ERR: ? ? ? ? ?3
> MIS: ? ? ? ? ?0

Is the kernel configuration the same? Also, I think some chipsets
handle IRQ distribution differently than others (I believe if
interrupts are enabled for more than one CPU for a given IRQ line,
some chipsets will distribute them across CPUs and some send them all
to the same CPU).