Driver for EasyPoint AS5011 2 axis joystick chip. This chip is plugged
on an I2C bus. It has been tested on ARM processor (i.MX27).
Interruptions are now managed by threaded irq.
Signed-off-by: Fabien Marteau <[email protected]>
---
drivers/input/joystick/Kconfig | 9 +
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/as5011.c | 417 +++++++++++++++++++++++++++++++++++++++
include/linux/as5011.h | 76 +++++++
4 files changed, 503 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/joystick/as5011.c
create mode 100644 include/linux/as5011.h
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 5b59616..5fad03e 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -255,6 +255,15 @@ config JOYSTICK_AMIGA
To compile this driver as a module, choose M here: the
module will be called amijoy.
+config JOYSTICK_AS5011
+ tristate "Austria Microsystem AS5011 joystick"
+ depends on I2C
+ help
+ Say Y here if you have an AS5011 digital joystick.
+
+ To compile this driver as a module, choose M here: the
+ module will be called as5011.
+
config JOYSTICK_JOYDUMP
tristate "Gameport data dumper"
select GAMEPORT
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index f3a8cbe..92dc0de 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_JOYSTICK_A3D) += a3d.o
obj-$(CONFIG_JOYSTICK_ADI) += adi.o
obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o
+obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o
obj-$(CONFIG_JOYSTICK_ANALOG) += analog.o
obj-$(CONFIG_JOYSTICK_COBRA) += cobra.o
obj-$(CONFIG_JOYSTICK_DB9) += db9.o
diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c
new file mode 100644
index 0000000..9f65357
--- /dev/null
+++ b/drivers/input/joystick/as5011.c
@@ -0,0 +1,417 @@
+/*
+ * Copyright (c) 2010 Fabien Marteau <[email protected]>
+ *
+ * Sponsored by ARMadeus Systems
+ */
+
+/*
+ * Driver for Austria Microsystems joysticks AS5011
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * TODO:
+ * - Manage power mode
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/sysfs.h>
+#include <linux/ctype.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <linux/as5011.h>
+#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
+
+MODULE_AUTHOR("Fabien Marteau <[email protected]>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define SIZE_NAME 30
+#define SIZE_EVENT_PATH 40
+#define AS5011_MAX_AXIS 80
+#define AS5011_MIN_AXIS (-80)
+#define AS5011_FUZZ 8
+#define AS5011_FLAT 40
+
+static int g_num = 1; /* device counter */
+
+static signed char as5011_i2c_read(struct i2c_client *client,
+ uint8_t aRegAddr);
+static int as5011_i2c_write(struct i2c_client *client,
+ uint8_t aRegAddr,
+ uint8_t aValue);
+
+/*
+ * interrupts operations
+ */
+
+static irqreturn_t button_interrupt(int irq, void *dev_id)
+{
+ struct as5011_platform_data *plat_dat =
+ (struct as5011_platform_data *)dev_id;
+ int ret;
+
+ mutex_lock(&plat_dat->button_lock);
+ ret = gpio_get_value(plat_dat->button_gpio);
+ if (ret)
+ input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 0);
+ else
+ input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 1);
+ input_sync(plat_dat->input_dev);
+ mutex_unlock(&plat_dat->button_lock);
+
+ return IRQ_HANDLED;
+}
+
+static void as5011_update_axes(struct as5011_platform_data *plat_dat)
+{
+ signed char x, y;
+
+ x = as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
+ y = as5011_i2c_read(plat_dat->i2c_client, AS5011_Y_RES_INT);
+ input_report_abs(plat_dat->input_dev, ABS_X, x);
+ input_report_abs(plat_dat->input_dev, ABS_Y, y);
+ input_sync(plat_dat->input_dev);
+}
+
+static irqreturn_t as5011_int_interrupt(int irq, void *dev_id)
+{
+ struct as5011_platform_data *plat_dat =
+ (struct as5011_platform_data *)dev_id;
+
+ mutex_lock(&plat_dat->update_lock);
+ as5011_update_axes(plat_dat);
+ mutex_unlock(&plat_dat->update_lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * I2C bus operation
+ */
+
+static int as5011_i2c_write(struct i2c_client *client,
+ uint8_t aRegAddr,
+ uint8_t aValue)
+{
+ int ret;
+ uint8_t data[2] = { aRegAddr, aValue };
+
+ struct i2c_msg msg = { client->addr,
+ I2C_M_IGNORE_NAK,
+ 2,
+ (uint8_t *)data };
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+
+ if (ret < 0)
+ return ret;
+ return 1;
+}
+
+static signed char as5011_i2c_read(struct i2c_client *client,
+ uint8_t aRegAddr)
+{
+ int ret;
+ uint8_t data[2];
+ struct i2c_msg msg_set[2];
+ struct i2c_msg msg1 = { client->addr,
+ I2C_M_REV_DIR_ADDR,
+ 1,
+ (uint8_t *)data};
+ struct i2c_msg msg2 = { client->addr,
+ I2C_M_RD|I2C_M_NOSTART,
+ 1,
+ (uint8_t *)data};
+
+ data[0] = aRegAddr;
+ msg_set[0] = msg1;
+ msg_set[1] = msg2;
+ ret = i2c_transfer(client->adapter, msg_set, 2);
+ if (ret < 0)
+ return ret;
+
+ if (data[0] & 0x80)
+ return -1*(1+(~data[0]));
+ else
+ return data[0];
+}
+
+static int __devinit as5011_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct as5011_platform_data *plat_dat = client->dev.platform_data;
+ int retval = 0;
+
+ plat_dat->num = g_num;
+ g_num++;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_PROTOCOL_MANGLING)) {
+ dev_err(&client->dev,
+ "i2c bus does not support protocol mangling, as5011 can't work\n");
+ retval = -ENODEV;
+ goto err_out;
+ }
+ plat_dat->i2c_client = client;
+
+
+ plat_dat->input_dev = input_allocate_device();
+ if (plat_dat->input_dev == NULL) {
+ dev_err(&client->dev,
+ "not enough memory for input devices structure\n");
+ retval = -ENOMEM;
+ goto err_out;
+ }
+
+ plat_dat->input_dev->name = "Austria Microsystem as5011 joystick";
+ plat_dat->input_dev->uniq = "Austria0";
+ plat_dat->input_dev->id.bustype = BUS_I2C;
+ plat_dat->input_dev->phys = NULL;
+ plat_dat->input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ plat_dat->input_dev->keybit[BIT_WORD(BTN_JOYSTICK)] =
+ BIT_MASK(BTN_JOYSTICK);
+
+ input_set_abs_params(plat_dat->input_dev,
+ ABS_X,
+ AS5011_MIN_AXIS,
+ AS5011_MAX_AXIS,
+ AS5011_FUZZ,
+ AS5011_FLAT);
+ input_set_abs_params(plat_dat->input_dev,
+ ABS_Y,
+ AS5011_MIN_AXIS,
+ AS5011_MAX_AXIS,
+ AS5011_FUZZ,
+ AS5011_FLAT);
+
+ plat_dat->button_irq_name = kmalloc(SIZE_NAME, GFP_KERNEL);
+ if (plat_dat->button_irq_name == NULL) {
+ dev_err(&client->dev,
+ "not enough memory for input devices irq name\n");
+ retval = -ENOMEM;
+ goto err_input_free_device;
+ }
+
+ scnprintf(plat_dat->button_irq_name,
+ SIZE_NAME,
+ "as5011_%d_button",
+ plat_dat->num);
+
+ retval = request_threaded_irq(plat_dat->button_irq,
+ NULL, button_interrupt,
+ 0, plat_dat->button_irq_name,
+ (void *)plat_dat);
+ if (retval < 0) {
+ dev_err(&client->dev, "Can't allocate irq %d\n",
+ plat_dat->button_irq);
+ retval = -EBUSY;
+ goto err_free_button_irq_name;
+ }
+
+ if (plat_dat->init_gpio != NULL) {
+ retval = plat_dat->init_gpio();
+ if (retval < 0) {
+ dev_err(&client->dev, "Failed to init gpios\n");
+ goto err_free_irq_button_interrupt;
+ }
+ }
+
+ /* chip soft reset */
+ retval = as5011_i2c_write(plat_dat->i2c_client,
+ AS5011_CTRL1,
+ AS5011_CTRL1_SOFT_RST);
+ if (retval < 0) {
+ dev_err(&plat_dat->i2c_client->dev,
+ "Soft reset failed\n");
+ goto err_exit_gpio;
+ }
+
+ mdelay(10);
+
+ retval = as5011_i2c_write(plat_dat->i2c_client,
+ AS5011_CTRL1,
+ AS5011_CTRL1_LP_PULSED |
+ AS5011_CTRL1_LP_ACTIVE |
+ AS5011_CTRL1_INT_ACT_EN
+ );
+ if (retval < 0) {
+ dev_err(&plat_dat->i2c_client->dev,
+ "Power config failed\n");
+ goto err_exit_gpio;
+ }
+
+ retval = as5011_i2c_write(plat_dat->i2c_client,
+ AS5011_CTRL2,
+ AS5011_CTRL2_INV_SPINNING);
+ if (retval < 0) {
+ dev_err(&plat_dat->i2c_client->dev,
+ "Can't invert spinning\n");
+ goto err_exit_gpio;
+ }
+
+ /* write threshold */
+ retval = as5011_i2c_write(plat_dat->i2c_client,
+ AS5011_XP,
+ plat_dat->Xp);
+ if (retval < 0) {
+ dev_err(&plat_dat->i2c_client->dev,
+ "Can't write threshold\n");
+ goto err_exit_gpio;
+ }
+
+ retval = as5011_i2c_write(plat_dat->i2c_client,
+ AS5011_XN,
+ plat_dat->Xn);
+ if (retval < 0) {
+ dev_err(&plat_dat->i2c_client->dev,
+ "Can't write threshold\n");
+ goto err_exit_gpio;
+ }
+
+ retval = as5011_i2c_write(plat_dat->i2c_client,
+ AS5011_YP,
+ plat_dat->Yp);
+ if (retval < 0) {
+ dev_err(&plat_dat->i2c_client->dev,
+ "Can't write threshold\n");
+ goto err_exit_gpio;
+ }
+
+ retval = as5011_i2c_write(plat_dat->i2c_client,
+ AS5011_YN,
+ plat_dat->Yn);
+ if (retval < 0) {
+ dev_err(&plat_dat->i2c_client->dev,
+ "Can't write threshold\n");
+ goto err_exit_gpio;
+ }
+
+ /* request irq */
+ plat_dat->int_irq_name = kmalloc(SIZE_NAME, GFP_KERNEL);
+ if (plat_dat->int_irq_name == NULL) {
+ dev_err(&client->dev,
+ "not enough memory for input devices int irq name\n");
+ retval = -ENOMEM;
+ goto err_exit_gpio;
+ }
+
+
+ /* to free irq gpio in chip*/
+ as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
+
+ /* initialize mutex */
+ mutex_init(&plat_dat->update_lock);
+ mutex_init(&plat_dat->button_lock);
+
+ scnprintf(plat_dat->int_irq_name,
+ SIZE_NAME,
+ "as5011_%d_int",
+ plat_dat->num);
+
+ if (request_threaded_irq(plat_dat->int_irq, NULL,
+ as5011_int_interrupt,
+ 0, plat_dat->int_irq_name, (void *)plat_dat)) {
+ dev_err(&client->dev, "Can't allocate int irq %d\n",
+ plat_dat->int_irq);
+ retval = -EBUSY;
+ goto err_free_int_irq_name;
+ }
+
+ retval = input_register_device(plat_dat->input_dev);
+ if (retval) {
+ dev_err(&client->dev, "Failed to register device\n");
+ goto err_free_irq_int;
+ }
+
+ return 0;
+
+ /* Error management */
+err_free_irq_int:
+ free_irq(plat_dat->int_irq, as5011_int_interrupt);
+err_free_int_irq_name:
+ kfree(plat_dat->int_irq_name);
+err_exit_gpio:
+ if (plat_dat->exit_gpio != NULL)
+ plat_dat->exit_gpio();
+err_free_irq_button_interrupt:
+ free_irq(plat_dat->button_irq, button_interrupt);
+err_free_button_irq_name:
+ kfree(plat_dat->button_irq_name);
+err_input_free_device:
+ input_free_device(plat_dat->input_dev);
+err_out:
+ return retval;
+}
+static int as5011_remove(struct i2c_client *client)
+{
+ struct as5011_platform_data *plat_dat = client->dev.platform_data;
+
+ input_unregister_device(plat_dat->input_dev);
+ free_irq(plat_dat->button_irq, plat_dat);
+ free_irq(plat_dat->int_irq, plat_dat);
+ kfree(plat_dat->button_irq_name);
+ if (plat_dat->exit_gpio != NULL)
+ plat_dat->exit_gpio();
+
+ return 0;
+}
+static const struct i2c_device_id as5011_id[] = {
+ { "as5011", 0 },
+ { }
+};
+
+static struct i2c_driver as5011_driver = {
+ .driver = {
+ .name = "as5011",
+ },
+ .probe = as5011_probe,
+ .remove = __devexit_p(as5011_remove),
+ .id_table = as5011_id,
+};
+
+/*
+ * Module initialization
+ */
+
+static int __init as5011_init(void)
+{
+ return i2c_add_driver(&as5011_driver);
+}
+
+static void __exit as5011_exit(void)
+{
+ i2c_del_driver(&as5011_driver);
+}
+
+module_init(as5011_init);
+module_exit(as5011_exit);
diff --git a/include/linux/as5011.h b/include/linux/as5011.h
new file mode 100644
index 0000000..c224752
--- /dev/null
+++ b/include/linux/as5011.h
@@ -0,0 +1,76 @@
+#ifndef _AS5011_H
+#define _AS5011_H
+
+/*
+ * Copyright (c) 2010 Fabien Marteau
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/mutex.h>
+
+#define AS5011_MAX_NAME_LENGTH 64
+#define AS5011_MAX_CNAME_LENGTH 16
+#define AS5011_MAX_PHYS_LENGTH 64
+#define AS5011_MAX_LENGTH 64
+
+/* registers */
+#define AS5011_CTRL1 0x76
+#define AS5011_CTRL2 0x75
+#define AS5011_XP 0x43
+#define AS5011_XN 0x44
+#define AS5011_YP 0x53
+#define AS5011_YN 0x54
+#define AS5011_X_REG 0x41
+#define AS5011_Y_REG 0x42
+#define AS5011_X_RES_INT 0x51
+#define AS5011_Y_RES_INT 0x52
+
+/* CTRL1 bits */
+#define AS5011_CTRL1_LP_PULSED 0x80
+#define AS5011_CTRL1_LP_ACTIVE 0x40
+#define AS5011_CTRL1_LP_CONTINUE 0x20
+#define AS5011_CTRL1_INT_WUP_EN 0x10
+#define AS5011_CTRL1_INT_ACT_EN 0x08
+#define AS5011_CTRL1_EXT_CLK_EN 0x04
+#define AS5011_CTRL1_SOFT_RST 0x02
+#define AS5011_CTRL1_DATA_VALID 0x01
+
+/* CTRL2 bits */
+#define AS5011_CTRL2_EXT_SAMPLE_EN 0x08
+#define AS5011_CTRL2_RC_BIAS_ON 0x04
+#define AS5011_CTRL2_INV_SPINNING 0x02
+
+
+struct as5011_platform_data {
+ /* public */
+ int button_gpio;
+ int button_irq;
+ int int_gpio;
+ int int_irq;
+ char Xp, Xn; /* threshold for x axis */
+ char Yp, Yn; /* threshold for y axis */
+
+ int (*init_gpio)(void); /* init interrupts gpios */
+ void (*exit_gpio)(void);/* exit gpios */
+
+ /* private */
+ int num;
+ struct input_dev *input_dev;
+ struct i2c_client *i2c_client;
+ unsigned char *button_irq_name;
+ unsigned char *int_irq_name;
+ char name[AS5011_MAX_NAME_LENGTH];
+ char cname[AS5011_MAX_CNAME_LENGTH];
+ char phys[AS5011_MAX_PHYS_LENGTH];
+ unsigned char data[AS5011_MAX_LENGTH];
+ char workqueue_name[AS5011_MAX_NAME_LENGTH];
+ struct workqueue_struct *workqueue;
+ struct work_struct update_axes_work;
+ struct mutex update_lock;
+ struct mutex button_lock;
+};
+
+#endif /* _AS5011_H */
--
1.7.0.4
Hi Fabien,
On 12/30/2010 4:07 PM, Fabien Marteau wrote:
> diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c
> new file mode 100644
> index 0000000..9f65357
> --- /dev/null
> +++ b/drivers/input/joystick/as5011.c
> @@ -0,0 +1,417 @@
> +/*
> + * Copyright (c) 2010 Fabien Marteau <[email protected]>
> + *
> + * Sponsored by ARMadeus Systems
> + */
Please move this along with GPL text down below.
> +
> +/*
> + * Driver for Austria Microsystems joysticks AS5011
> + */
> +
This too.
> +/*
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + * TODO:
> + * - Manage power mode
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/string.h>
> +#include <linux/list.h>
> +#include <linux/sysfs.h>
> +#include <linux/ctype.h>
> +#include <linux/hwmon-sysfs.h>
> +
> +#include <linux/types.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/mutex.h>
> +
> +#include <linux/input.h>
> +#include <linux/gpio.h>
> +#include <linux/delay.h>
> +
> +#include <linux/as5011.h>
> +#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
> +
> +MODULE_AUTHOR("Fabien Marteau <[email protected]>");
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_LICENSE("GPL");
> +
> +#define SIZE_NAME 30
> +#define SIZE_EVENT_PATH 40
> +#define AS5011_MAX_AXIS 80
> +#define AS5011_MIN_AXIS (-80)
> +#define AS5011_FUZZ 8
> +#define AS5011_FLAT 40
> +
> +static int g_num = 1; /* device counter */
> +
> +static signed char as5011_i2c_read(struct i2c_client *client,
> + uint8_t aRegAddr);
> +static int as5011_i2c_write(struct i2c_client *client,
> + uint8_t aRegAddr,
> + uint8_t aValue);
> +
Please re-arrange these functions in such a way that you don't need
these forward declarations.
> +/*
> + * interrupts operations
> + */
No need to mention :)
> +
> +static irqreturn_t button_interrupt(int irq, void *dev_id)
> +{
> + struct as5011_platform_data *plat_dat =
> + (struct as5011_platform_data *)dev_id;
casting from void * not required.
> + int ret;
> +
> + mutex_lock(&plat_dat->button_lock);
> + ret = gpio_get_value(plat_dat->button_gpio);
> + if (ret)
> + input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 0);
> + else
> + input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 1);
> + input_sync(plat_dat->input_dev);
> + mutex_unlock(&plat_dat->button_lock);
Do you need this lock? Please explain.
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void as5011_update_axes(struct as5011_platform_data *plat_dat)
> +{
> + signed char x, y;
> +
> + x = as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
> + y = as5011_i2c_read(plat_dat->i2c_client, AS5011_Y_RES_INT);
> + input_report_abs(plat_dat->input_dev, ABS_X, x);
> + input_report_abs(plat_dat->input_dev, ABS_Y, y);
> + input_sync(plat_dat->input_dev);
> +}
> +
> +static irqreturn_t as5011_int_interrupt(int irq, void *dev_id)
> +{
> + struct as5011_platform_data *plat_dat =
> + (struct as5011_platform_data *)dev_id;
As mentioned above no casting required.
> +
> + mutex_lock(&plat_dat->update_lock);
> + as5011_update_axes(plat_dat);
> + mutex_unlock(&plat_dat->update_lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +/*
> + * I2C bus operation
> + */
> +
No need to metnion.
> +static int as5011_i2c_write(struct i2c_client *client,
> + uint8_t aRegAddr,
> + uint8_t aValue)
> +{
> + int ret;
> + uint8_t data[2] = { aRegAddr, aValue };
No CamelCases please. Please run scripts/checkpatch.pl on your patch before submission.
> +
> + struct i2c_msg msg = { client->addr,
> + I2C_M_IGNORE_NAK,
> + 2,
> + (uint8_t *)data };
> +
> + ret = i2c_transfer(client->adapter, &msg, 1);
> +
> + if (ret < 0)
> + return ret;
> + return 1;
> +}
> +
> +static signed char as5011_i2c_read(struct i2c_client *client,
> + uint8_t aRegAddr)
> +{
> + int ret;
> + uint8_t data[2];
> + struct i2c_msg msg_set[2];
> + struct i2c_msg msg1 = { client->addr,
> + I2C_M_REV_DIR_ADDR,
> + 1,
> + (uint8_t *)data};
> + struct i2c_msg msg2 = { client->addr,
> + I2C_M_RD|I2C_M_NOSTART,
> + 1,
> + (uint8_t *)data};
> +
> + data[0] = aRegAddr;
> + msg_set[0] = msg1;
> + msg_set[1] = msg2;
> + ret = i2c_transfer(client->adapter, msg_set, 2);
> + if (ret < 0)
> + return ret;
> +
> + if (data[0] & 0x80)
> + return -1*(1+(~data[0]));
> + else
> + return data[0];
> +}
> +
> +static int __devinit as5011_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct as5011_platform_data *plat_dat = client->dev.platform_data;
> + int retval = 0;
> +
> + plat_dat->num = g_num;
> + g_num++;
What is g_num++ and why it has to be global?
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_PROTOCOL_MANGLING)) {
Please explain why MANGLING required.
> + dev_err(&client->dev,
> + "i2c bus does not support protocol mangling, as5011 can't work\n");
> + retval = -ENODEV;
> + goto err_out;
> + }
> + plat_dat->i2c_client = client;
> +
> +
> + plat_dat->input_dev = input_allocate_device();
> + if (plat_dat->input_dev == NULL) {
> + dev_err(&client->dev,
> + "not enough memory for input devices structure\n");
> + retval = -ENOMEM;
> + goto err_out;
> + }
> +
> + plat_dat->input_dev->name = "Austria Microsystem as5011 joystick";
> + plat_dat->input_dev->uniq = "Austria0";
> + plat_dat->input_dev->id.bustype = BUS_I2C;
> + plat_dat->input_dev->phys = NULL;
> + plat_dat->input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> + plat_dat->input_dev->keybit[BIT_WORD(BTN_JOYSTICK)] =
> + BIT_MASK(BTN_JOYSTICK);
> +
> + input_set_abs_params(plat_dat->input_dev,
> + ABS_X,
> + AS5011_MIN_AXIS,
> + AS5011_MAX_AXIS,
> + AS5011_FUZZ,
> + AS5011_FLAT);
> + input_set_abs_params(plat_dat->input_dev,
> + ABS_Y,
> + AS5011_MIN_AXIS,
> + AS5011_MAX_AXIS,
> + AS5011_FUZZ,
> + AS5011_FLAT);
> +
> + plat_dat->button_irq_name = kmalloc(SIZE_NAME, GFP_KERNEL);
> + if (plat_dat->button_irq_name == NULL) {
> + dev_err(&client->dev,
> + "not enough memory for input devices irq name\n");
> + retval = -ENOMEM;
> + goto err_input_free_device;
> + }
> +
> + scnprintf(plat_dat->button_irq_name,
> + SIZE_NAME,
> + "as5011_%d_button",
> + plat_dat->num);
> +
> + retval = request_threaded_irq(plat_dat->button_irq,
> + NULL, button_interrupt,
> + 0, plat_dat->button_irq_name,
> + (void *)plat_dat);
casting not required for last param.
> + if (retval < 0) {
> + dev_err(&client->dev, "Can't allocate irq %d\n",
> + plat_dat->button_irq);
> + retval = -EBUSY;
> + goto err_free_button_irq_name;
> + }
> +
> + if (plat_dat->init_gpio != NULL) {
> + retval = plat_dat->init_gpio();
> + if (retval < 0) {
> + dev_err(&client->dev, "Failed to init gpios\n");
> + goto err_free_irq_button_interrupt;
> + }
> + }
> +
> + /* chip soft reset */
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_CTRL1,
> + AS5011_CTRL1_SOFT_RST);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "Soft reset failed\n");
> + goto err_exit_gpio;
> + }
> +
> + mdelay(10);
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_CTRL1,
> + AS5011_CTRL1_LP_PULSED |
> + AS5011_CTRL1_LP_ACTIVE |
> + AS5011_CTRL1_INT_ACT_EN
> + );
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "Power config failed\n");
> + goto err_exit_gpio;
> + }
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_CTRL2,
> + AS5011_CTRL2_INV_SPINNING);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "Can't invert spinning\n");
> + goto err_exit_gpio;
> + }
> +
> + /* write threshold */
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_XP,
> + plat_dat->Xp);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "Can't write threshold\n");
> + goto err_exit_gpio;
> + }
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_XN,
> + plat_dat->Xn);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "Can't write threshold\n");
> + goto err_exit_gpio;
> + }
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_YP,
> + plat_dat->Yp);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "Can't write threshold\n");
> + goto err_exit_gpio;
> + }
> +
> + retval = as5011_i2c_write(plat_dat->i2c_client,
> + AS5011_YN,
> + plat_dat->Yn);
> + if (retval < 0) {
> + dev_err(&plat_dat->i2c_client->dev,
> + "Can't write threshold\n");
> + goto err_exit_gpio;
> + }
> +
> + /* request irq */
> + plat_dat->int_irq_name = kmalloc(SIZE_NAME, GFP_KERNEL);
So much for name? why not just put it like "as5011_joystick" in the call itself.
> + if (plat_dat->int_irq_name == NULL) {
> + dev_err(&client->dev,
> + "not enough memory for input devices int irq name\n");
> + retval = -ENOMEM;
> + goto err_exit_gpio;
> + }
> +
> +
> + /* to free irq gpio in chip*/
> + as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
> +
> + /* initialize mutex */
> + mutex_init(&plat_dat->update_lock);
> + mutex_init(&plat_dat->button_lock);
> +
> + scnprintf(plat_dat->int_irq_name,
> + SIZE_NAME,
> + "as5011_%d_int",
> + plat_dat->num);
> +
> + if (request_threaded_irq(plat_dat->int_irq, NULL,
> + as5011_int_interrupt,
> + 0, plat_dat->int_irq_name, (void *)plat_dat)) {
> + dev_err(&client->dev, "Can't allocate int irq %d\n",
> + plat_dat->int_irq);
> + retval = -EBUSY;
> + goto err_free_int_irq_name;
> + }
> +
> + retval = input_register_device(plat_dat->input_dev);
> + if (retval) {
> + dev_err(&client->dev, "Failed to register device\n");
> + goto err_free_irq_int;
> + }
> +
> + return 0;
> +
> + /* Error management */
> +err_free_irq_int:
> + free_irq(plat_dat->int_irq, as5011_int_interrupt);
> +err_free_int_irq_name:
> + kfree(plat_dat->int_irq_name);
> +err_exit_gpio:
> + if (plat_dat->exit_gpio != NULL)
> + plat_dat->exit_gpio();
> +err_free_irq_button_interrupt:
> + free_irq(plat_dat->button_irq, button_interrupt);
> +err_free_button_irq_name:
> + kfree(plat_dat->button_irq_name);
> +err_input_free_device:
> + input_free_device(plat_dat->input_dev);
> +err_out:
> + return retval;
> +}
> +static int as5011_remove(struct i2c_client *client)
> +{
> + struct as5011_platform_data *plat_dat = client->dev.platform_data;
> +
> + input_unregister_device(plat_dat->input_dev);
> + free_irq(plat_dat->button_irq, plat_dat);
> + free_irq(plat_dat->int_irq, plat_dat);
> + kfree(plat_dat->button_irq_name);
> + if (plat_dat->exit_gpio != NULL)
> + plat_dat->exit_gpio();
> +
> + return 0;
> +}
> +static const struct i2c_device_id as5011_id[] = {
> + { "as5011", 0 },
> + { }
> +};
MODULE_DEVICE_ALIAS
> +
> +static struct i2c_driver as5011_driver = {
> + .driver = {
> + .name = "as5011",
> + },
> + .probe = as5011_probe,
> + .remove = __devexit_p(as5011_remove),
> + .id_table = as5011_id,
> +};
> +
> +/*
> + * Module initialization
> + */
no need
> +
> +static int __init as5011_init(void)
> +{
> + return i2c_add_driver(&as5011_driver);
> +}
> +
> +static void __exit as5011_exit(void)
> +{
> + i2c_del_driver(&as5011_driver);
> +}
> +
> +module_init(as5011_init);
> +module_exit(as5011_exit);
> diff --git a/include/linux/as5011.h b/include/linux/as5011.h
> new file mode 100644
> index 0000000..c224752
> --- /dev/null
> +++ b/include/linux/as5011.h
> @@ -0,0 +1,76 @@
> +#ifndef _AS5011_H
> +#define _AS5011_H
> +
> +/*
> + * Copyright (c) 2010 Fabien Marteau
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +#include <linux/mutex.h>
> +
> +#define AS5011_MAX_NAME_LENGTH 64
> +#define AS5011_MAX_CNAME_LENGTH 16
> +#define AS5011_MAX_PHYS_LENGTH 64
> +#define AS5011_MAX_LENGTH 64
> +
> +/* registers */
> +#define AS5011_CTRL1 0x76
> +#define AS5011_CTRL2 0x75
> +#define AS5011_XP 0x43
> +#define AS5011_XN 0x44
> +#define AS5011_YP 0x53
> +#define AS5011_YN 0x54
> +#define AS5011_X_REG 0x41
> +#define AS5011_Y_REG 0x42
> +#define AS5011_X_RES_INT 0x51
> +#define AS5011_Y_RES_INT 0x52
> +
> +/* CTRL1 bits */
> +#define AS5011_CTRL1_LP_PULSED 0x80
> +#define AS5011_CTRL1_LP_ACTIVE 0x40
> +#define AS5011_CTRL1_LP_CONTINUE 0x20
> +#define AS5011_CTRL1_INT_WUP_EN 0x10
> +#define AS5011_CTRL1_INT_ACT_EN 0x08
> +#define AS5011_CTRL1_EXT_CLK_EN 0x04
> +#define AS5011_CTRL1_SOFT_RST 0x02
> +#define AS5011_CTRL1_DATA_VALID 0x01
> +
> +/* CTRL2 bits */
> +#define AS5011_CTRL2_EXT_SAMPLE_EN 0x08
> +#define AS5011_CTRL2_RC_BIAS_ON 0x04
> +#define AS5011_CTRL2_INV_SPINNING 0x02
> +
These should move to .c file.
> +
> +struct as5011_platform_data {
> + /* public */
> + int button_gpio;
> + int button_irq;
> + int int_gpio;
> + int int_irq;
> + char Xp, Xn; /* threshold for x axis */
> + char Yp, Yn; /* threshold for y axis */
no CamelCases please
> +
> + int (*init_gpio)(void); /* init interrupts gpios */
> + void (*exit_gpio)(void);/* exit gpios */
You should better do gpio_request/free etc, in the driver itself,
and anyother thing can be left out in these hooks.
> +
> + /* private */
> + int num;
> + struct input_dev *input_dev;
> + struct i2c_client *i2c_client;
> + unsigned char *button_irq_name;
> + unsigned char *int_irq_name;
no need
> + char name[AS5011_MAX_NAME_LENGTH];
> + char cname[AS5011_MAX_CNAME_LENGTH];
> + char phys[AS5011_MAX_PHYS_LENGTH];
> + unsigned char data[AS5011_MAX_LENGTH];
> + char workqueue_name[AS5011_MAX_NAME_LENGTH];
no need
> + struct workqueue_struct *workqueue;
> + struct work_struct update_axes_work;
> + struct mutex update_lock;
> + struct mutex button_lock;
> +};
> +
> +#endif /* _AS5011_H */
---Trilok Soni
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
Hi Trilok,
>
>> + int ret;
>> +
>> + mutex_lock(&plat_dat->button_lock);
>> + ret = gpio_get_value(plat_dat->button_gpio);
>> + if (ret)
>> + input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 0);
>> + else
>> + input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 1);
>> + input_sync(plat_dat->input_dev);
>> + mutex_unlock(&plat_dat->button_lock);
>
> Do you need this lock? Please explain.
If gpio_get_value() sleep, I need it to avoid race condition.
>> +static int as5011_i2c_write(struct i2c_client *client,
>> + uint8_t aRegAddr,
>> + uint8_t aValue)
>> +{
>> + int ret;
>> + uint8_t data[2] = { aRegAddr, aValue };
>
> No CamelCases please. Please run scripts/checkpatch.pl on your patch before submission.
I had no warning for CamelCases name.
>> +static int __devinit as5011_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct as5011_platform_data *plat_dat = client->dev.platform_data;
>> + int retval = 0;
>> +
>> + plat_dat->num = g_num;
>> + g_num++;
>
> What is g_num++ and why it has to be global?
It's for interruptions name, if several as5011 joystick I set a number different for each joystick :
scnprintf(plat_dat->button_irq_name,
SIZE_NAME,
"as5011_%d_button",
plat_dat->num);
>
>> +
>> + if (!i2c_check_functionality(client->adapter,
>> + I2C_FUNC_PROTOCOL_MANGLING)) {
>
> Please explain why MANGLING required.
It's required for i2c register reading. To read register as5011 chip use this i2c frames :
S Addr Rd [A] Register_addr [A] [Data] NA P
Wich is not conform to i2c protocol, i2c protocol require a repeated start to do that :
S Addr Wr [A] Register_addr [A] S Addr Rd [Data] NA P
Then protocol mangling capability is required to avoid repeated start.
>> + int (*init_gpio)(void); /* init interrupts gpios */
>> + void (*exit_gpio)(void);/* exit gpios */
>
> You should better do gpio_request/free etc, in the driver itself,
> and anyother thing can be left out in these hooks.
Yes, but on my platform, requesting gpio are specific. And I have to configure irq edge on initialization :
static int as5011_init_gpio(void)
{
int ret;
ret = mxc_gpio_setup_multiple_pins(as5011_pins0,
ARRAY_SIZE(as5011_pins0),
"AS5011_0");
if (ret < 0) {
goto as5011_gpio_setup_error;
}
set_irq_type(AS5011_INT_IRQ, IRQ_TYPE_EDGE_FALLING);
set_irq_type(AS5011_BUTTON_IRQ, IRQ_TYPE_EDGE_BOTH);
return ret;
mxc_gpio_release_multiple_pins(as5011_pins0, ARRAY_SIZE(as5011_pins0));
as5011_gpio_setup_error:
return ret;
}
> ---Trilok Soni
Thanks for the review.
--- Fabien Marteau