The device table is required to load modules based on modaliases.
After adding the MODULE_DEVICE_TABLE, below entry will be added to
modules.alias:
alias i2c:bq20z75 bq20z75
Signed-off-by: Axel Lin <[email protected]>
---
drivers/power/bq20z75.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c
index 4141775..1548de2 100644
--- a/drivers/power/bq20z75.c
+++ b/drivers/power/bq20z75.c
@@ -541,6 +541,7 @@ static const struct i2c_device_id bq20z75_id[] = {
{ "bq20z75", 0 },
{}
};
+MODULE_DEVICE_TABLE(i2c, bq20z75_id);
static struct i2c_driver bq20z75_battery_driver = {
.probe = bq20z75_probe,
--
1.7.2
The device table is required to load modules based on modaliases.
After adding the MODULE_DEVICE_TABLE, below entries will be added to
modules.alias:
alias i2c:ds2786 ds2782_battery
alias i2c:ds2782 ds2782_battery
Signed-off-by: Axel Lin <[email protected]>
---
drivers/power/ds2782_battery.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index 6957e8a..4d2dc4f 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -393,6 +393,7 @@ static const struct i2c_device_id ds278x_id[] = {
{"ds2786", DS2786},
{},
};
+MODULE_DEVICE_TABLE(i2c, ds278x_id);
static struct i2c_driver ds278x_battery_driver = {
.driver = {
--
1.7.2
The device table is required to load modules based on modaliases.
After adding the MODULE_DEVICE_TABLE, below entry will be added to
modules.alias:
alias i2c:aer915 z2_battery
Signed-off-by: Axel Lin <[email protected]>
---
drivers/power/z2_battery.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c
index e5ed52d..81304c0 100644
--- a/drivers/power/z2_battery.c
+++ b/drivers/power/z2_battery.c
@@ -293,6 +293,7 @@ static const struct i2c_device_id z2_batt_id[] = {
{ "aer915", 0 },
{ }
};
+MODULE_DEVICE_TABLE(i2c, z2_batt_id);
static struct i2c_driver z2_batt_driver = {
.driver = {
--
1.7.2
On Tue, Mar 01, 2011 at 05:22:33PM +0800, Axel Lin wrote:
> The device table is required to load modules based on modaliases.
> After adding the MODULE_DEVICE_TABLE, below entry will be added to
> modules.alias:
> alias i2c:bq20z75 bq20z75
>
> Signed-off-by: Axel Lin <[email protected]>
Applied all three patches, thanks!
--
Anton Vorontsov
Email: [email protected]
On 03/01/2011 10:23 PM, Axel Lin wrote:
> The device table is required to load modules based on modaliases.
> After adding the MODULE_DEVICE_TABLE, below entries will be added to
> modules.alias:
> alias i2c:ds2786 ds2782_battery
> alias i2c:ds2782 ds2782_battery
>
> Signed-off-by: Axel Lin <[email protected]>
Thanks Axel,
Acked-by: Ryan Mallon <[email protected]>
> ---
> drivers/power/ds2782_battery.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
> index 6957e8a..4d2dc4f 100644
> --- a/drivers/power/ds2782_battery.c
> +++ b/drivers/power/ds2782_battery.c
> @@ -393,6 +393,7 @@ static const struct i2c_device_id ds278x_id[] = {
> {"ds2786", DS2786},
> {},
> };
> +MODULE_DEVICE_TABLE(i2c, ds278x_id);
>
> static struct i2c_driver ds278x_battery_driver = {
> .driver = {
--
Bluewater Systems Ltd - ARM Technology Solution Centre
Ryan Mallon 5 Amuri Park, 404 Barbadoes St
[email protected] PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com New Zealand
Phone: +64 3 3779127 Freecall: Australia 1800 148 751
Fax: +64 3 3779135 USA 1800 261 2934