2011-03-18 11:34:14

by Piotr Hosowicz

Subject: Firmware works I think, why my networking fails?

Hello,

The 2.6.39-git3 kernel works as usual, mii-tool shows that there is
link. Any newer kernel fails this test. What can I do? What extra
information would you need?

Regards,

Piotr Hosowicz

--
"Wiedza to w?adza. Ale niewiedza, niestety, nie oznacza jeszcze
braku w?adzy." Niels Bohr
NP: Peter Green Splinter Group - Big Change Is Gonna Come
NB: 2.6.38-git3

2011-03-18 14:07:09

by Piotr Hosowicz

Subject: Re: Firmware works I think, why my networking fails?

On 18.03.2011 12:34, Piotr Hosowicz wrote:
> Hello,
>
> The 2.6.39-git3 kernel works as usual, mii-tool shows that there is
> link. Any newer kernel fails this test. What can I do? What extra
> information would you need?

Here is some more ethtool info, when cannot connect through ADSL via eth0:

aapi205:~# cat eth0.et.BAD.txt
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 1000baseT/Half 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
Link detected: no

Regards,

Piotr Hosowicz

--
TV: "Grucha?a jest taka, ?e cieszy si? z ka?dego pchni?cia."
NP: Banda Do Sol - Tempo
NB: 2.6.38-git3