2011-03-24 09:14:58

by Nicolas Ferre

[permalink] [raw]
Subject: Re: Hit BUG_ON in dma-mapping.c:425 (RFC)

On 1/6/2011 12:49 AM, Nicolas Ferre :
> Hi,
>
> While running mtd_stresstest on a dataflash (atmel_spi
> + mtd_dataflash drivers) I hit the BUG_ON directive that
> is at the beginning of ___dma_single_cpu_to_dev() function.
> This function is called from the SPI driver that do a
> dma_map_single() before DMA operations on the buffer
> transmitted from upper layers.
>
> It seems that this address is above "high_memory" limit because
> it is allocated by vmalloc (in mtd_stresstest.c:285)...
>
> The question is: where the bug is relying? Is there a
> configuration that I must modify in AT91 Linux to be able
> to modify this behavior or is this an error in the use of
> dma_map_single() in the atmel_spi.c driver?
>
> After searching the web, it seems it is quite common after
> 2.6.34 kernels... But I cannot figure out what is the issue.
>
> Here is the Oops output:
> root@at91sam9m10g45ek:~# insmod ../n/mtd_stresstest.ko dev=3
>
> =================================================
> mtd_stresstest: MTD device: 3
> mtd_stresstest: MTD device size 4325376, eraseblock size 528, page size 528, count of eraseblocks 8192, pages per eraseblock 1, OOB size 0
> mtd_stresstest: doing operations
> mtd_stresstest: 0 operations done
> kernel BUG at /home/nferre/workspace/linux/linux-2.6-arm/arch/arm/mm/dma-mapping.c:425!
> Unable to handle kernel NULL pointer dereference at virtual address 00000000
> pgd = c31bc000
> [00000000] *pgd=732b1031, *pte=00000000, *ppte=00000000
> Internal error: Oops: 817 [#1]
> last sysfs file: /sys/devices/platform/atmel-ehci/usb1/1-2/1-2:1.0/host0/target0:0:0/0:0:0:0/block/sda/size
> Modules linked in: mtd_stresstest(+)
> CPU: 0 Not tainted (2.6.37+ #2)
> PC is at __bug+0x1c/0x28
> LR is at __bug+0x18/0x28
> pc : [<c0030374>] lr : [<c0030370>] psr: 20000093
> sp : c3b09df8 ip : 00000200 fp : 00601c00
> r10: c4886000 r9 : 00001807 r8 : 74886000
> r7 : c38d37a0 r6 : c39660e8 r5 : c3b09ebc r4 : c3b09e98
> r3 : 00000000 r2 : c3b09dec r1 : c02ef2c1 r0 : 0000005e
> Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
> Control: 0005317f Table: 731bc000 DAC: 00000015
> Process insmod (pid: 1649, stack limit = 0xc3b08270)
> Stack: (0xc3b09df8 to 0xc3b0a000)
> 9de0: ffffffff c0032b1c
> 9e00: c3b09e98 c01817c4 c3966000 c3b09e3c 00000000 c38d37a0 c3966000 c018070c
> 9e20: 60000013 c3b09e3c 00000000 c018076c c3b09ebc c0180914 c38d37a0 00000000
> 9e40: c3b09e40 c3b09e40 c3979e00 00000420 c3b09f2c 00000210 00601c00 c0179ba8
> 9e60: 00100100 00318e70 c38d37a0 c3979e24 00000000 c3979e00 00000000 00000004
> 9e80: 73979e00 ffffffff 00000000 00000000 c3b09eb4 c3b09ebc c4886000 00000000
> 9ea0: 00000210 ffffffff ffffffff 00000000 00000000 c3b09ebc c3b09e90 c3b09e90
> 9ec0: c3b09eb4 c38d37a0 00000000 c0180ab8 c3b09e3c 00000000 ffffff8d 00000000
> 9ee0: 00000000 00000000 00000000 00000000 00000000 00001807 00000000 0000601c
> 9f00: 00318e70 00000420 00001808 bf0034b0 00000420 c3b09f2c c4886000 00000001
> 9f20: 00000000 00000000 00000000 00000000 0000002e bf0005fc bf003000 00012008
> 9f40: 00000000 c002cfa8 c3b08000 00000000 00012008 c002740c c035ecf4 00000001
> 9f60: bf0005fc 00000000 00012008 bf0005fc 00000000 00012008 00011d23 c002cfa8
> 9f80: 00000000 c0062dec 00012018 00011d23 00012008 00000000 00012008 00020000
> 9fa0: 00000080 c002ce00 00000000 00012008 00012018 00011d23 00012008 00000001
> 9fc0: 00000000 00012008 00020000 00000080 bec09efb bec09ef4 00012018 00012008
> 9fe0: 00000003 bec09c94 00008d77 401c0054 60000010 00012018 657a6973 69657700
> [<c0030374>] (__bug+0x1c/0x28) from [<c0032b1c>] (___dma_single_cpu_to_dev+0x34/0x5c)
> [<c0032b1c>] (___dma_single_cpu_to_dev+0x34/0x5c) from [<c01817c4>] (atmel_spi_transfer+0xc8/0x1c4)
> [<c01817c4>] (atmel_spi_transfer+0xc8/0x1c4) from [<c018070c>] (__spi_async+0x94/0xa0)
> [<c018070c>] (__spi_async+0x94/0xa0) from [<c018076c>] (spi_async_locked+0x14/0x2c)
> [<c018076c>] (spi_async_locked+0x14/0x2c) from [<c0180914>] (__spi_sync+0x5c/0x9c)
> [<c0180914>] (__spi_sync+0x5c/0x9c) from [<c0179ba8>] (dataflash_write+0x180/0x1fc)
> [<c0179ba8>] (dataflash_write+0x180/0x1fc) from [<bf0034b0>] (mtd_stresstest_init+0x4b0/0x604 [mtd_stresstest])
> [<bf0034b0>] (mtd_stresstest_init+0x4b0/0x604 [mtd_stresstest]) from [<c002740c>] (do_one_initcall+0xcc/0x1a8)
> [<c002740c>] (do_one_initcall+0xcc/0x1a8) from [<c0062dec>] (sys_init_module+0x90/0x1a4)
> [<c0062dec>] (sys_init_module+0x90/0x1a4) from [<c002ce00>] (ret_fast_syscall+0x0/0x2c)
> Code: e59f0010 e1a01003 eb0916de e3a03000 (e5833000)
> ---[ end trace 0f2f3786a6a31f57 ]---
> Segmentation fault
>
> This append on 2.6.37 kernel.

I come back on this issue with a little patch. It figures out where is located the page address if it appends to be in high memory (allocated by vmalloc()).

What do you think about it:

diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -647,6 +647,22 @@ static void atmel_spi_next_message(struct spi_master *master)
atmel_spi_next_xfer(master, msg);
}

+static void *adjust_buffer_location(struct device *dev, void *buf)
+{
+ if (likely(buf < high_memory)) {
+ return buf;
+ } else {
+ struct page *pg;
+
+ pg = vmalloc_to_page(buf);
+ if (pg == 0) {
+ dev_err(dev, "failed to vmalloc_to_page\n");
+ return NULL;
+ }
+ return page_address(pg) + ((size_t)buf & ~PAGE_MASK);
+ }
+}
+
/*
* For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma:
* - The buffer is either valid for CPU access, else NULL
@@ -658,23 +674,24 @@ static int
atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
{
struct device *dev = &as->pdev->dev;
+ void *ptr;

xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
if (xfer->tx_buf) {
- /* tx_buf is a const void* where we need a void * for the dma
- * mapping */
- void *nonconst_tx = (void *)xfer->tx_buf;
-
- xfer->tx_dma = dma_map_single(dev,
- nonconst_tx, xfer->len,
- DMA_TO_DEVICE);
+ ptr = adjust_buffer_location(dev, (void *)xfer->tx_buf);
+ if (ptr)
+ xfer->tx_dma = dma_map_single(dev,
+ ptr, xfer->len,
+ DMA_TO_DEVICE);
if (dma_mapping_error(dev, xfer->tx_dma))
return -ENOMEM;
}
if (xfer->rx_buf) {
- xfer->rx_dma = dma_map_single(dev,
- xfer->rx_buf, xfer->len,
- DMA_FROM_DEVICE);
+ ptr = adjust_buffer_location(dev, xfer->rx_buf);
+ if (ptr)
+ xfer->rx_dma = dma_map_single(dev,
+ ptr, xfer->len,
+ DMA_FROM_DEVICE);
if (dma_mapping_error(dev, xfer->rx_dma)) {
if (xfer->tx_buf)
dma_unmap_single(dev,diff --git a/arch/arm/mach-at91/board-


2011-03-24 08:25:47

by Russell King - ARM Linux

[permalink] [raw]
Subject: Re: Hit BUG_ON in dma-mapping.c:425 (RFC)

On Thu, Mar 24, 2011 at 04:18:13PM +0800, Nicolas Ferre wrote:
> diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
> --- a/drivers/spi/atmel_spi.c
> +++ b/drivers/spi/atmel_spi.c
> @@ -647,6 +647,22 @@ static void atmel_spi_next_message(struct spi_master *master)
> atmel_spi_next_xfer(master, msg);
> }
>
> +static void *adjust_buffer_location(struct device *dev, void *buf)
> +{
> + if (likely(buf < high_memory)) {
> + return buf;
> + } else {
> + struct page *pg;
> +
> + pg = vmalloc_to_page(buf);
> + if (pg == 0) {
> + dev_err(dev, "failed to vmalloc_to_page\n");
> + return NULL;
> + }
> + return page_address(pg) + ((size_t)buf & ~PAGE_MASK);
> + }
> +}
> +

This really doesn't fix the problem. If the page is read or written via
the vmalloc mapping, you'll have stale data.

DMA to vmalloc areas is dodgy at best.

2011-03-24 08:38:17

by Artem Bityutskiy

[permalink] [raw]
Subject: Re: Hit BUG_ON in dma-mapping.c:425 (RFC)

On Thu, 2011-03-24 at 08:25 +0000, Russell King - ARM Linux wrote:
> On Thu, Mar 24, 2011 at 04:18:13PM +0800, Nicolas Ferre wrote:
> > diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
> > --- a/drivers/spi/atmel_spi.c
> > +++ b/drivers/spi/atmel_spi.c
> > @@ -647,6 +647,22 @@ static void atmel_spi_next_message(struct spi_master *master)
> > atmel_spi_next_xfer(master, msg);
> > }
> >
> > +static void *adjust_buffer_location(struct device *dev, void *buf)
> > +{
> > + if (likely(buf < high_memory)) {
> > + return buf;
> > + } else {
> > + struct page *pg;
> > +
> > + pg = vmalloc_to_page(buf);
> > + if (pg == 0) {
> > + dev_err(dev, "failed to vmalloc_to_page\n");
> > + return NULL;
> > + }
> > + return page_address(pg) + ((size_t)buf & ~PAGE_MASK);
> > + }
> > +}
> > +
>
> This really doesn't fix the problem. If the page is read or written via
> the vmalloc mapping, you'll have stale data.
>
> DMA to vmalloc areas is dodgy at best.

This topics pops up often. So what is the right fix? And sorry for my
ignorance.

--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)

2011-03-24 09:27:58

by Russell King - ARM Linux

[permalink] [raw]
Subject: Re: Hit BUG_ON in dma-mapping.c:425 (RFC)

On Thu, Mar 24, 2011 at 10:36:18AM +0200, Artem Bityutskiy wrote:
> On Thu, 2011-03-24 at 08:25 +0000, Russell King - ARM Linux wrote:
> > On Thu, Mar 24, 2011 at 04:18:13PM +0800, Nicolas Ferre wrote:
> > > diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
> > > --- a/drivers/spi/atmel_spi.c
> > > +++ b/drivers/spi/atmel_spi.c
> > > @@ -647,6 +647,22 @@ static void atmel_spi_next_message(struct spi_master *master)
> > > atmel_spi_next_xfer(master, msg);
> > > }
> > >
> > > +static void *adjust_buffer_location(struct device *dev, void *buf)
> > > +{
> > > + if (likely(buf < high_memory)) {
> > > + return buf;
> > > + } else {
> > > + struct page *pg;
> > > +
> > > + pg = vmalloc_to_page(buf);
> > > + if (pg == 0) {
> > > + dev_err(dev, "failed to vmalloc_to_page\n");
> > > + return NULL;
> > > + }
> > > + return page_address(pg) + ((size_t)buf & ~PAGE_MASK);
> > > + }
> > > +}
> > > +
> >
> > This really doesn't fix the problem. If the page is read or written via
> > the vmalloc mapping, you'll have stale data.
> >
> > DMA to vmalloc areas is dodgy at best.
>
> This topics pops up often. So what is the right fix? And sorry for my
> ignorance.

I have no idea. The problem comes down to MTDs interfaces being designed
only for PIO - it's expected that the CPU places data into the virtual
address being passed. This virtual address can be a vmalloc address,
a kmalloc'd address or a page address.

As long as that happens, everything all works because there's no cache
aliasing problems to consider as the buffers are always accessed through
the same mappings.

As soon as there's any attempt to move away from PIO, things get really
sticky because, with *any* DMA noncoherent architecture (it's not limited
to ARM) you run into issues with cache coherency causing data corruption.

When cache maintainence ends up having to deal with virtual addresses for
one level of cache and physical addresses for subseqent levels, the
problems are compounded even more.

The only real answer I can give is: if you want to deal with DMA, you
absolutely must conform to the restrictions on DMA which means that you
can't pass vmalloc addresses to the DMA API.

You can't work around that by converting a vmalloc address to a physical
address and then its coresponding virtual page address as that means the
DMA API will flush the wrong virtual address range and you'll again have
cache incoherency. That goes for *all* of the DMA API interfaces.

2011-03-24 09:41:53

by Russell King - ARM Linux

[permalink] [raw]
Subject: Re: Hit BUG_ON in dma-mapping.c:425 (RFC)

On Thu, Mar 24, 2011 at 09:27:32AM +0000, Russell King - ARM Linux wrote:
> I have no idea. The problem comes down to MTDs interfaces being designed
> only for PIO - it's expected that the CPU places data into the virtual
> address being passed. This virtual address can be a vmalloc address,
> a kmalloc'd address or a page address.
>
> As long as that happens, everything all works because there's no cache
> aliasing problems to consider as the buffers are always accessed through
> the same mappings.
>
> As soon as there's any attempt to move away from PIO, things get really
> sticky because, with *any* DMA noncoherent architecture (it's not limited
> to ARM) you run into issues with cache coherency causing data corruption.
>
> When cache maintainence ends up having to deal with virtual addresses for
> one level of cache and physical addresses for subseqent levels, the
> problems are compounded even more.
>
> The only real answer I can give is: if you want to deal with DMA, you
> absolutely must conform to the restrictions on DMA which means that you
> can't pass vmalloc addresses to the DMA API.
>
> You can't work around that by converting a vmalloc address to a physical
> address and then its coresponding virtual page address as that means the
> DMA API will flush the wrong virtual address range and you'll again have
> cache incoherency. That goes for *all* of the DMA API interfaces.

I should add - from asm-generic/dma-mapping-common.h:

static inline dma_addr_t dma_map_single_attrs(struct device *dev, void *ptr,
size_t size,
enum dma_data_direction dir,
struct dma_attrs *attrs)
{
struct dma_map_ops *ops = get_dma_ops(dev);
dma_addr_t addr;

kmemcheck_mark_initialized(ptr, size);
BUG_ON(!valid_dma_direction(dir));
addr = ops->map_page(dev, virt_to_page(ptr),
(unsigned long)ptr & ~PAGE_MASK, size,
dir, attrs);

And note that virt_to_page() only works for addresses in the kernel's
direct mapped memory region (iow, kmalloc et.al, not vmalloc). The
above will probably go wrong silently (or maybe oops if you're lucky)
rather than BUG. The difference is that on ARM we ensure that such bad
cases are always caught.

2011-03-24 11:10:09

by Artem Bityutskiy

[permalink] [raw]
Subject: Re: Hit BUG_ON in dma-mapping.c:425 (RFC)

On Thu, 2011-03-24 at 09:27 +0000, Russell King - ARM Linux wrote:
> The only real answer I can give is: if you want to deal with DMA, you
> absolutely must conform to the restrictions on DMA which means that you
> can't pass vmalloc addresses to the DMA API.

I see, thanks. Well, I do not see any issues with changing MTD-related
SW (JFFS2, UBI, UBIFS, etc) to use kmalloc. But this would require som
non-trivial efforts, although I believe this is doable.

Basically, we have to work with entire eraseblocks often, which may be
128KiB or 256KiB or even 512KiB nowadays. And we vmalloc the
eraseblock-sized buffers in these cases.

We could instead work with arrays of pages (or multiple pages), and then
do things like readv/writev. But this requires a brave knight who'd come
and just implemented this, or a company who'd fund someone to work on
this.

--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)