Hi,
this patch fixes problem with some SD cards during initialization. Not all SD(HC) card can run at even 375kHz. Sets
minimal frequency to 200kHz.
And in function "at91_mci_set_ios" is limit to maximum division, it's only 8 bit value.
Kernel version: 2.6.38
Signed-off-by: Jiri Prchal <[email protected]>
---
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/drivers/mmc/host/at91_mci.c
/home/prchal/arm/fw-cdu/linux/linux-2.6.38/drivers/mmc/host/at91_mci.c
--- linux-2.6.38-vanilla/drivers/mmc/host/at91_mci.c 2011-03-15 02:20:32.000000000 +0100
+++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/drivers/mmc/host/at91_mci.c 2011-03-24 09:20:22.869370179 +0100
@@ -724,6 +724,10 @@ static void at91_mci_set_ios(struct mmc_
else
clkdiv = (at91_master_clock / ios->clock) / 2;
+ /* set maximum divider */
+ if (clkdiv > 255)
+ clkdiv = 255;
+
pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv,
at91_master_clock / (2 * (clkdiv + 1)));
}
@@ -944,7 +948,7 @@ static int __init at91_mci_probe(struct
}
mmc->ops = &at91_mci_ops;
- mmc->f_min = 375000;
+ mmc->f_min = 200000; /* not all cards can run at 375kHz */
mmc->f_max = 25000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = 0;