2011-06-15 21:47:27

by Maarten Lankhorst

[permalink] [raw]
Subject: [PATCH v2] xhci: Add reset on resume quirk for asrock p67 host

The asrock p67 xhci controller completely dies on resume, add a
quirk for this, to bring the host back online after a suspend.

This should be backported to stable kernels up until 2.6.37.

Signed-off-by: Maarten Lankhorst <[email protected]>
Cc: [email protected]
---
V2: Fix inversed logic, and correct kernel version

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 17541d0..cb16de2 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,9 @@
#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000

+#define PCI_VENDOR_ID_ETRON 0x1b6f
+#define PCI_DEVICE_ID_ASROCK_P67 0x7023
+
static const char hcd_name[] = "xhci_hcd";

/* called after powerup, by probe or system-pm "wakeup" */
@@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
xhci->limit_active_eps = 64;
}
+ if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+ pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+ xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+ }

/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 06e7023..17a0a08 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
msleep(100);

spin_lock_irq(&xhci->lock);
+ if (xhci->quirks & XHCI_RESET_ON_RESUME)
+ hibernated = true;

if (!hibernated) {
/* step 1: restore register */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7d1ea3b..b769a75 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1308,6 +1308,7 @@ struct xhci_hcd {
*/
#define XHCI_EP_LIMIT_QUIRK (1 << 5)
#define XHCI_BROKEN_MSI (1 << 6)
+#define XHCI_RESET_ON_RESUME (1 << 7)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */



Attachments:
xhci.patch (1.67 kB)

2011-06-15 22:43:41

by Sarah Sharp

[permalink] [raw]
Subject: Re: [PATCH v2] xhci: Add reset on resume quirk for asrock p67 host

No attached patches, just inline ones please. :) I've fixed this up for
now, since your first patch was inline.

Sarah Sharp

On Wed, Jun 15, 2011 at 11:47:21PM +0200, Maarten Lankhorst wrote:
> The asrock p67 xhci controller completely dies on resume, add a
> quirk for this, to bring the host back online after a suspend.
>
> This should be backported to stable kernels up until 2.6.37.
>
> Signed-off-by: Maarten Lankhorst <[email protected]>
> Cc: [email protected]
> ---
> V2: Fix inversed logic, and correct kernel version
>
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index 17541d0..cb16de2 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -29,6 +29,9 @@
> #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
> #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
>
> +#define PCI_VENDOR_ID_ETRON 0x1b6f
> +#define PCI_DEVICE_ID_ASROCK_P67 0x7023
> +
> static const char hcd_name[] = "xhci_hcd";
>
> /* called after powerup, by probe or system-pm "wakeup" */
> @@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
> xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
> xhci->limit_active_eps = 64;
> }
> + if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
> + pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
> + xhci->quirks |= XHCI_RESET_ON_RESUME;
> + xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
> + }
>
> /* Make sure the HC is halted. */
> retval = xhci_halt(xhci);
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 06e7023..17a0a08 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
> msleep(100);
>
> spin_lock_irq(&xhci->lock);
> + if (xhci->quirks & XHCI_RESET_ON_RESUME)
> + hibernated = true;
>
> if (!hibernated) {
> /* step 1: restore register */
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 7d1ea3b..b769a75 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1308,6 +1308,7 @@ struct xhci_hcd {
> */
> #define XHCI_EP_LIMIT_QUIRK (1 << 5)
> #define XHCI_BROKEN_MSI (1 << 6)
> +#define XHCI_RESET_ON_RESUME (1 << 7)
> unsigned int num_active_eps;
> unsigned int limit_active_eps;
> /* There are two roothubs to keep track of bus suspend info for */
>
>

2011-06-16 07:26:10

by Maarten Lankhorst

[permalink] [raw]
Subject: Re: [PATCH v2] xhci: Add reset on resume quirk for asrock p67 host

Hi Sarah,

Op 16-06-11 00:43, Sarah Sharp schreef:
> No attached patches, just inline ones please. :) I've fixed this up for
> now, since your first patch was inline.
Actually, it seems I did it both ways by accident. Testing patch -Np1
with that message still worked. Sorry about that. Sent it right before
falling asleep.


~Maarten