On 06.11.2011, at 14:54, Jan Kiszka wrote:
> On 2011-08-24 23:38, Alexander Graf wrote:
>> On LinuxCon I had a nice chat with Linus on what he thinks kvm-tool
>> would be doing and what he expects from it. Basically he wants a
>> small and simple tool he and other developers can run to try out and
>> see if the kernel they just built actually works.
>>
>> Fortunately, QEMU can do that today already! The only piece that was
>> missing was the "simple" piece of the equation, so here is a script
>> that wraps around QEMU and executes a kernel you just built.
>>
>> If you do have KVM around and are not cross-compiling, it will use
>> KVM. But if you don't, you can still fall back to emulation mode and
>> at least check if your kernel still does what you expect. I only
>> implemented support for s390x and ppc there, but it's easily extensible
>> to more platforms, as QEMU can emulate (and virtualize) pretty much
>> any platform out there.
>>
>> If you don't have qemu installed, please do so before using this script. Your
>> distro should provide a package for it (might even call it "kvm"). If not,
>> just compile it from source - it's not hard!
>>
>> To quickly get going, just execute the following as user:
>>
>> $ ./Documentation/run-qemu.sh -r / -a init=/bin/bash
>>
>> This will drop you into a shell on your rootfs.
>>
>> Happy hacking!
>>
>> Signed-off-by: Alexander Graf <[email protected]>
>>
>> ---
>>
>> v1 -> v2:
>>
>> - fix naming of QEMU
>> - use grep -q for has_config
>> - support multiple -a args
>> - spawn gdb on execution
>> - pass through qemu options
>> - dont use qemu-system-x86_64 on i386
>> - add funny sentence to startup text
>> - more helpful error messages
>> ---
>> scripts/run-qemu.sh | 334 +++++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 files changed, 334 insertions(+), 0 deletions(-)
>> create mode 100755 scripts/run-qemu.sh
>>
>> diff --git a/scripts/run-qemu.sh b/scripts/run-qemu.sh
>> new file mode 100755
>> index 0000000..5d4e185
>> --- /dev/null
>> +++ b/scripts/run-qemu.sh
>> @@ -0,0 +1,334 @@
>> +#!/bin/bash
>> +#
>> +# QEMU Launcher
>> +#
>> +# This script enables simple use of the KVM and QEMU tool stack for
>> +# easy kernel testing. It allows to pass either a host directory to
>> +# the guest or a disk image. Example usage:
>> +#
>> +# Run the host root fs inside a VM:
>> +#
>> +# $ ./scripts/run-qemu.sh -r /
>> +#
>> +# Run the same with SDL:
>> +#
>> +# $ ./scripts/run-qemu.sh -r / --sdl
>> +#
>> +# Or with a PPC build:
>> +#
>> +# $ ARCH=ppc ./scripts/run-qemu.sh -r /
>> +#
>> +# PPC with a mac99 model by passing options to QEMU:
>> +#
>> +# $ ARCH=ppc ./scripts/run-qemu.sh -r / -- -M mac99
>> +#
>> +
>> +USE_SDL=
>> +USE_VNC=
>> +USE_GDB=1
>> +KERNEL_BIN=arch/x86/boot/bzImage
>> +MON_STDIO=
>> +KERNEL_APPEND2=
>> +SERIAL=ttyS0
>> +SERIAL_KCONFIG=SERIAL_8250
>> +BASENAME=$(basename "$0")
>> +
>> +function usage() {
>> + echo "
>> +$BASENAME allows you to execute a virtual machine with the Linux kernel
>> +that you just built. To only execute a simple VM, you can just run it
>> +on your root fs with \"-r / -a init=/bin/bash\"
>> +
>> + -a, --append parameters
>> + Append the given parameters to the kernel command line.
>> +
>> + -d, --disk image
>> + Add the image file as disk into the VM.
>> +
>> + -D, --no-gdb
>> + Don't run an xterm with gdb attached to the guest.
>> +
>> + -r, --root directory
>> + Use the specified directory as root directory inside the guest.
>> +
>> + -s, --sdl
>> + Enable SDL graphical output.
>> +
>> + -S, --smp cpus
>> + Set number of virtual CPUs.
>> +
>> + -v, --vnc
>> + Enable VNC graphical output.
>> +
>> +Examples:
>> +
>> + Run the host root fs inside a VM:
>> + $ ./scripts/run-qemu.sh -r /
>> +
>> + Run the same with SDL:
>> + $ ./scripts/run-qemu.sh -r / --sdl
>> +
>> + Or with a PPC build:
>> + $ ARCH=ppc ./scripts/run-qemu.sh -r /
>> +
>> + PPC with a mac99 model by passing options to QEMU:
>> + $ ARCH=ppc ./scripts/run-qemu.sh -r / -- -M mac99
>> +"
>> +}
>> +
>> +function require_config() {
>> + if [ "$(grep CONFIG_$1=y .config)" ]; then
>> + return
>> + fi
>> +
>> + echo "You need to enable CONFIG_$1 for run-qemu to work properly"
>> + exit 1
>> +}
>> +
>> +function has_config() {
>> + grep -q "CONFIG_$1=y" .config
>> +}
>> +
>> +function drive_if() {
>> + if has_config VIRTIO_BLK; then
>> + echo virtio
>> + elif has_config ATA_PIIX; then
>> + echo ide
>
> + require_config "BLK_DEV_SD"
>
> Maybe there should also be a warning if no standard FS (ext[34], btrfs,
> xfs etc.) is build into the kernel.
>
> Another thing, but that's just a recommendation for initrd-free mode:
> DEVTMPFS_MOUNT
>
>> + else
>> + echo "\
>> +Your kernel must have either VIRTIO_BLK or ATA_PIIX
>> +enabled for block device assignment" >&2
>> + exit 1
>> + fi
>> +}
>> +
>> +GETOPT=`getopt -o a:d:Dhr:sS:v --long append,disk:,no-gdb,help,root:,sdl,smp:,vnc \
>> + -n "$(basename \"$0\")" -- "$@"`
>> +
>> +if [ $? != 0 ]; then
>> + echo "Terminating..." >&2
>> + exit 1
>> +fi
>> +
>> +eval set -- "$GETOPT"
>> +
>> +while true; do
>> + case "$1" in
>> + -a|--append)
>> + KERNEL_APPEND2="$KERNEL_APPEND2 $KERNEL_APPEND2"
>
> That should be
>
> KERNEL_APPEND2="$KERNEL_APPEND2 $2"
>
>> + shift
>> + ;;
>> + -d|--disk)
>> + QEMU_OPTIONS="$QEMU_OPTIONS -drive \
>> + file=$2,if=$(drive_if),cache=unsafe"
>
> if [ $? != 0 ]; then
> exit $?
> fi
Not sure I understand this one. There's no program executing here...
Alex
On 2012-05-11 10:42, Alexander Graf wrote:
>
> On 06.11.2011, at 14:54, Jan Kiszka wrote:
>
>> On 2011-08-24 23:38, Alexander Graf wrote:
>>> On LinuxCon I had a nice chat with Linus on what he thinks kvm-tool
>>> would be doing and what he expects from it. Basically he wants a
>>> small and simple tool he and other developers can run to try out and
>>> see if the kernel they just built actually works.
>>>
>>> Fortunately, QEMU can do that today already! The only piece that was
>>> missing was the "simple" piece of the equation, so here is a script
>>> that wraps around QEMU and executes a kernel you just built.
>>>
>>> If you do have KVM around and are not cross-compiling, it will use
>>> KVM. But if you don't, you can still fall back to emulation mode and
>>> at least check if your kernel still does what you expect. I only
>>> implemented support for s390x and ppc there, but it's easily extensible
>>> to more platforms, as QEMU can emulate (and virtualize) pretty much
>>> any platform out there.
>>>
>>> If you don't have qemu installed, please do so before using this script. Your
>>> distro should provide a package for it (might even call it "kvm"). If not,
>>> just compile it from source - it's not hard!
>>>
>>> To quickly get going, just execute the following as user:
>>>
>>> $ ./Documentation/run-qemu.sh -r / -a init=/bin/bash
>>>
>>> This will drop you into a shell on your rootfs.
>>>
>>> Happy hacking!
>>>
>>> Signed-off-by: Alexander Graf <[email protected]>
>>>
>>> ---
>>>
>>> v1 -> v2:
>>>
>>> - fix naming of QEMU
>>> - use grep -q for has_config
>>> - support multiple -a args
>>> - spawn gdb on execution
>>> - pass through qemu options
>>> - dont use qemu-system-x86_64 on i386
>>> - add funny sentence to startup text
>>> - more helpful error messages
>>> ---
>>> scripts/run-qemu.sh | 334 +++++++++++++++++++++++++++++++++++++++++++++++++++
>>> 1 files changed, 334 insertions(+), 0 deletions(-)
>>> create mode 100755 scripts/run-qemu.sh
>>>
>>> diff --git a/scripts/run-qemu.sh b/scripts/run-qemu.sh
>>> new file mode 100755
>>> index 0000000..5d4e185
>>> --- /dev/null
>>> +++ b/scripts/run-qemu.sh
>>> @@ -0,0 +1,334 @@
>>> +#!/bin/bash
>>> +#
>>> +# QEMU Launcher
>>> +#
>>> +# This script enables simple use of the KVM and QEMU tool stack for
>>> +# easy kernel testing. It allows to pass either a host directory to
>>> +# the guest or a disk image. Example usage:
>>> +#
>>> +# Run the host root fs inside a VM:
>>> +#
>>> +# $ ./scripts/run-qemu.sh -r /
>>> +#
>>> +# Run the same with SDL:
>>> +#
>>> +# $ ./scripts/run-qemu.sh -r / --sdl
>>> +#
>>> +# Or with a PPC build:
>>> +#
>>> +# $ ARCH=ppc ./scripts/run-qemu.sh -r /
>>> +#
>>> +# PPC with a mac99 model by passing options to QEMU:
>>> +#
>>> +# $ ARCH=ppc ./scripts/run-qemu.sh -r / -- -M mac99
>>> +#
>>> +
>>> +USE_SDL=
>>> +USE_VNC=
>>> +USE_GDB=1
>>> +KERNEL_BIN=arch/x86/boot/bzImage
>>> +MON_STDIO=
>>> +KERNEL_APPEND2=
>>> +SERIAL=ttyS0
>>> +SERIAL_KCONFIG=SERIAL_8250
>>> +BASENAME=$(basename "$0")
>>> +
>>> +function usage() {
>>> + echo "
>>> +$BASENAME allows you to execute a virtual machine with the Linux kernel
>>> +that you just built. To only execute a simple VM, you can just run it
>>> +on your root fs with \"-r / -a init=/bin/bash\"
>>> +
>>> + -a, --append parameters
>>> + Append the given parameters to the kernel command line.
>>> +
>>> + -d, --disk image
>>> + Add the image file as disk into the VM.
>>> +
>>> + -D, --no-gdb
>>> + Don't run an xterm with gdb attached to the guest.
>>> +
>>> + -r, --root directory
>>> + Use the specified directory as root directory inside the guest.
>>> +
>>> + -s, --sdl
>>> + Enable SDL graphical output.
>>> +
>>> + -S, --smp cpus
>>> + Set number of virtual CPUs.
>>> +
>>> + -v, --vnc
>>> + Enable VNC graphical output.
>>> +
>>> +Examples:
>>> +
>>> + Run the host root fs inside a VM:
>>> + $ ./scripts/run-qemu.sh -r /
>>> +
>>> + Run the same with SDL:
>>> + $ ./scripts/run-qemu.sh -r / --sdl
>>> +
>>> + Or with a PPC build:
>>> + $ ARCH=ppc ./scripts/run-qemu.sh -r /
>>> +
>>> + PPC with a mac99 model by passing options to QEMU:
>>> + $ ARCH=ppc ./scripts/run-qemu.sh -r / -- -M mac99
>>> +"
>>> +}
>>> +
>>> +function require_config() {
>>> + if [ "$(grep CONFIG_$1=y .config)" ]; then
>>> + return
>>> + fi
>>> +
>>> + echo "You need to enable CONFIG_$1 for run-qemu to work properly"
>>> + exit 1
>>> +}
>>> +
>>> +function has_config() {
>>> + grep -q "CONFIG_$1=y" .config
>>> +}
>>> +
>>> +function drive_if() {
>>> + if has_config VIRTIO_BLK; then
>>> + echo virtio
>>> + elif has_config ATA_PIIX; then
>>> + echo ide
>>
>> + require_config "BLK_DEV_SD"
>>
>> Maybe there should also be a warning if no standard FS (ext[34], btrfs,
>> xfs etc.) is build into the kernel.
>>
>> Another thing, but that's just a recommendation for initrd-free mode:
>> DEVTMPFS_MOUNT
>>
>>> + else
>>> + echo "\
>>> +Your kernel must have either VIRTIO_BLK or ATA_PIIX
>>> +enabled for block device assignment" >&2
>>> + exit 1
>>> + fi
>>> +}
>>> +
>>> +GETOPT=`getopt -o a:d:Dhr:sS:v --long append,disk:,no-gdb,help,root:,sdl,smp:,vnc \
>>> + -n "$(basename \"$0\")" -- "$@"`
>>> +
>>> +if [ $? != 0 ]; then
>>> + echo "Terminating..." >&2
>>> + exit 1
>>> +fi
>>> +
>>> +eval set -- "$GETOPT"
>>> +
>>> +while true; do
>>> + case "$1" in
>>> + -a|--append)
>>> + KERNEL_APPEND2="$KERNEL_APPEND2 $KERNEL_APPEND2"
>>
>> That should be
>>
>> KERNEL_APPEND2="$KERNEL_APPEND2 $2"
>>
>>> + shift
>>> + ;;
>>> + -d|--disk)
>>> + QEMU_OPTIONS="$QEMU_OPTIONS -drive \
>>> + file=$2,if=$(drive_if),cache=unsafe"
>>
>> if [ $? != 0 ]; then
>> exit $?
>> fi
>
> Not sure I understand this one. There's no program executing here...
Not sure either. Does drive_if exit the complete script when it fails?
Maybe it was related to this, give it a try again.
Jan