Hi Olav,
please find below a patch for the isp1362-hcd.c driver to always
save the message in case of underrun. More information is provided
inside the patch comment. Let us know if you need any further
information.
Best regards,
Claudio
Subject: isp1362-hcd.c: usb message always saved in case of underrun
From: Bruno Morelli <[email protected]>
The usb message must be saved also in case the USB endpoint is not a
control endpoint (i.e., "endpoint 0"), otherwise in some circumstances
we don't have a payload in case of error.
The patch has been created by tracing with usbmon the different error
messages generated by this driver with respect to the ehci-hcd driver.
Signed-off-by: Bruno Morelli <[email protected]>
Signed-off-by: Claudio Scordino <[email protected]>
Tested-by: Bruno Morelli <[email protected]>
---
drivers/usb/host/isp1362-hcd.c | 11 ++++++-----
1 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 2ed112d..61bf1b2 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -543,13 +543,14 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid,
short_ok ? "" : "not_",
PTD_GET_COUNT(ptd), ep->maxpacket, len);
+ /* save the data underrun error code for later and
+ * proceed with the status stage
+ */
+ urb->actual_length += PTD_GET_COUNT(ptd);
+ BUG_ON(urb->actual_length >
+ urb->transfer_buffer_length);
if (usb_pipecontrol(urb->pipe)) {
ep->nextpid = USB_PID_ACK;
- /* save the data underrun error code for later and
- * proceed with the status stage
- */
- urb->actual_length += PTD_GET_COUNT(ptd);
- BUG_ON(urb->actual_length > urb->transfer_buffer_length);
if (urb->status == -EINPROGRESS)
urb->status = cc_to_error[PTD_DATAUNDERRUN];
--
1.7.1