2022-11-09 20:06:32

by Nícolas F. R. A. Prado

[permalink] [raw]
Subject: [PATCH v2] arm64: defconfig: Enable missing configs for mt8183-jacuzzi-juniper

Enable missing configs in the arm64 defconfig to get all devices probing
on the mt8183-kukui-jacuzzi-juniper machine.

The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
to DP bridge (used for the internal display), MT8183 sound cards, SCP
co-processor, MediaTek Global Command Engine (controlled by CMDQ
driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
and voltage scaling, AUXADC thermal sensors.

All symbols are enabled as modules with the exception of SPI, which is
enabled as builtin since on some platforms like mt8195-cherry, the
ChromeOS Embedded Controller is connected through SPI and it is
responsible for the regulators powering the MMC controller used for the
SD card, and thus SPI support is required for booting.

By enabling the support for all of this machine's devices on the
defconfig we make it effortless to test the relevant hardware both by
developers as well as CI systems like KernelCI.

Signed-off-by: Nícolas F. R. A. Prado <[email protected]>

---
Related KernelCI links:
[1] https://github.com/kernelci/kernelci-core/pull/1352
[2] https://github.com/kernelci/bootrr/pull/22

v1: https://lore.kernel.org/all/[email protected]

Changes in v2:
- Squashed all commits into a single one

arch/arm64/configs/defconfig | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 226bb30ea7e2..14ce97d78662 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -392,6 +392,7 @@ CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
+CONFIG_ATH10K_SDIO=m
CONFIG_ATH10K_SNOC=m
CONFIG_WCN36XX=m
CONFIG_ATH11K=m
@@ -412,6 +413,7 @@ CONFIG_KEYBOARD_CROS_EC=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_GOODIX=m
+CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
@@ -462,6 +464,10 @@ CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS=m
+CONFIG_TCG_TIS_SPI=m
+CONFIG_TCG_TIS_SPI_CR50=y
+CONFIG_TCG_TIS_I2C_CR50=m
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
@@ -505,6 +511,7 @@ CONFIG_SPI_IMX=m
CONFIG_SPI_FSL_DSPI=y
CONFIG_SPI_MESON_SPICC=m
CONFIG_SPI_MESON_SPIFC=m
+CONFIG_SPI_MT65XX=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_ROCKCHIP=y
@@ -617,6 +624,7 @@ CONFIG_BRCMSTB_THERMAL=m
CONFIG_EXYNOS_THERMAL=y
CONFIG_TEGRA_SOCTHERM=m
CONFIG_TEGRA_BPMP_THERMAL=m
+CONFIG_GENERIC_ADC_THERMAL=m
CONFIG_QCOM_TSENS=y
CONFIG_QCOM_SPMI_ADC_TM5=m
CONFIG_QCOM_SPMI_TEMP_ALARM=m
@@ -701,6 +709,7 @@ CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEDIATEK_JPEG=m
CONFIG_VIDEO_QCOM_CAMSS=m
CONFIG_VIDEO_QCOM_VENUS=m
CONFIG_VIDEO_RCAR_ISP=m
@@ -763,6 +772,7 @@ CONFIG_DRM_SII902X=m
CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_THINE_THC63LVD1024=m
CONFIG_DRM_TI_SN65DSI86=m
+CONFIG_DRM_ANALOGIX_ANX7625=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_CDNS_MHDP8546=m
@@ -805,6 +815,9 @@ CONFIG_SND_SOC_IMX_SGTL5000=m
CONFIG_SND_SOC_IMX_SPDIF=m
CONFIG_SND_SOC_FSL_ASOC_CARD=m
CONFIG_SND_SOC_IMX_AUDMIX=m
+CONFIG_SND_SOC_MT8183=m
+CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m
+CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
CONFIG_SND_MESON_AXG_SOUND_CARD=m
CONFIG_SND_MESON_GX_SOUND_CARD=m
CONFIG_SND_SOC_QCOM=m
@@ -1113,6 +1126,7 @@ CONFIG_ARM_SMMU_V3=y
CONFIG_MTK_IOMMU=y
CONFIG_QCOM_IOMMU=y
CONFIG_REMOTEPROC=y
+CONFIG_MTK_SCP=m
CONFIG_QCOM_Q6V5_ADSP=m
CONFIG_QCOM_Q6V5_MSS=m
CONFIG_QCOM_Q6V5_PAS=m
@@ -1130,8 +1144,10 @@ CONFIG_RASPBERRYPI_POWER=y
CONFIG_FSL_DPAA=y
CONFIG_FSL_MC_DPIO=y
CONFIG_FSL_RCPM=y
+CONFIG_MTK_CMDQ=m
CONFIG_MTK_DEVAPC=m
CONFIG_MTK_PMIC_WRAP=y
+CONFIG_MTK_SVS=m
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_CPR=y
@@ -1182,6 +1198,7 @@ CONFIG_ARCH_TEGRA_234_SOC=y
CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_ARM_IMX_BUS_DEVFREQ=m
CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
+CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
@@ -1189,6 +1206,7 @@ CONFIG_RENESAS_RPCIF=m
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_MAX9611=m
+CONFIG_MEDIATEK_MT6577_AUXADC=m
CONFIG_QCOM_SPMI_VADC=m
CONFIG_QCOM_SPMI_ADC5=m
CONFIG_ROCKCHIP_SARADC=m
--
2.38.1



2022-11-10 09:38:26

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v2] arm64: defconfig: Enable missing configs for mt8183-jacuzzi-juniper

On 09/11/2022 20:50, Nícolas F. R. A. Prado wrote:
> Enable missing configs in the arm64 defconfig to get all devices probing
> on the mt8183-kukui-jacuzzi-juniper machine.
>
> The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
> cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
> to DP bridge (used for the internal display), MT8183 sound cards, SCP
> co-processor, MediaTek Global Command Engine (controlled by CMDQ
> driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
> and voltage scaling, AUXADC thermal sensors.
>
> All symbols are enabled as modules with the exception of SPI, which is
> enabled as builtin since on some platforms like mt8195-cherry, the
> ChromeOS Embedded Controller is connected through SPI and it is
> responsible for the regulators powering the MMC controller used for the
> SD card, and thus SPI support is required for booting.
>
> By enabling the support for all of this machine's devices on the
> defconfig we make it effortless to test the relevant hardware both by
> developers as well as CI systems like KernelCI.
>
> Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
>


Reviewed-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof


Subject: Re: [PATCH v2] arm64: defconfig: Enable missing configs for mt8183-jacuzzi-juniper

Il 09/11/22 20:50, Nícolas F. R. A. Prado ha scritto:
> Enable missing configs in the arm64 defconfig to get all devices probing
> on the mt8183-kukui-jacuzzi-juniper machine.
>
> The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
> cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
> to DP bridge (used for the internal display), MT8183 sound cards, SCP
> co-processor, MediaTek Global Command Engine (controlled by CMDQ
> driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
> and voltage scaling, AUXADC thermal sensors.
>
> All symbols are enabled as modules with the exception of SPI, which is
> enabled as builtin since on some platforms like mt8195-cherry, the
> ChromeOS Embedded Controller is connected through SPI and it is
> responsible for the regulators powering the MMC controller used for the
> SD card, and thus SPI support is required for booting.
>
> By enabling the support for all of this machine's devices on the
> defconfig we make it effortless to test the relevant hardware both by
> developers as well as CI systems like KernelCI.
>
> Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
>

Tested-by: AngeloGioacchino Del Regno <[email protected]>



2022-11-11 09:10:45

by Matthias Brugger

[permalink] [raw]
Subject: Re: [PATCH v2] arm64: defconfig: Enable missing configs for mt8183-jacuzzi-juniper



On 09/11/2022 20:50, Nícolas F. R. A. Prado wrote:
> Enable missing configs in the arm64 defconfig to get all devices probing
> on the mt8183-kukui-jacuzzi-juniper machine.
>
> The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
> cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
> to DP bridge (used for the internal display), MT8183 sound cards, SCP
> co-processor, MediaTek Global Command Engine (controlled by CMDQ
> driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
> and voltage scaling, AUXADC thermal sensors.
>
> All symbols are enabled as modules with the exception of SPI, which is
> enabled as builtin since on some platforms like mt8195-cherry, the
> ChromeOS Embedded Controller is connected through SPI and it is
> responsible for the regulators powering the MMC controller used for the
> SD card, and thus SPI support is required for booting.
>
> By enabling the support for all of this machine's devices on the
> defconfig we make it effortless to test the relevant hardware both by
> developers as well as CI systems like KernelCI.
>
> Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
>

Applied! Next time please make sure to add the linux mediatek mailinglist.

Regards,
Matthias

> ---
> Related KernelCI links:
> [1] https://github.com/kernelci/kernelci-core/pull/1352
> [2] https://github.com/kernelci/bootrr/pull/22
>
> v1: https://lore.kernel.org/all/[email protected]
>
> Changes in v2:
> - Squashed all commits into a single one
>
> arch/arm64/configs/defconfig | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 226bb30ea7e2..14ce97d78662 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -392,6 +392,7 @@ CONFIG_USB_NET_PLUSB=m
> CONFIG_USB_NET_MCS7830=m
> CONFIG_ATH10K=m
> CONFIG_ATH10K_PCI=m
> +CONFIG_ATH10K_SDIO=m
> CONFIG_ATH10K_SNOC=m
> CONFIG_WCN36XX=m
> CONFIG_ATH11K=m
> @@ -412,6 +413,7 @@ CONFIG_KEYBOARD_CROS_EC=y
> CONFIG_INPUT_TOUCHSCREEN=y
> CONFIG_TOUCHSCREEN_ATMEL_MXT=m
> CONFIG_TOUCHSCREEN_GOODIX=m
> +CONFIG_TOUCHSCREEN_ELAN=m
> CONFIG_TOUCHSCREEN_EDT_FT5X06=m
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PM8941_PWRKEY=y
> @@ -462,6 +464,10 @@ CONFIG_IPMI_HANDLER=m
> CONFIG_IPMI_DEVICE_INTERFACE=m
> CONFIG_IPMI_SI=m
> CONFIG_TCG_TPM=y
> +CONFIG_TCG_TIS=m
> +CONFIG_TCG_TIS_SPI=m
> +CONFIG_TCG_TIS_SPI_CR50=y
> +CONFIG_TCG_TIS_I2C_CR50=m
> CONFIG_TCG_TIS_I2C_INFINEON=y
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_MUX=y
> @@ -505,6 +511,7 @@ CONFIG_SPI_IMX=m
> CONFIG_SPI_FSL_DSPI=y
> CONFIG_SPI_MESON_SPICC=m
> CONFIG_SPI_MESON_SPIFC=m
> +CONFIG_SPI_MT65XX=y
> CONFIG_SPI_ORION=y
> CONFIG_SPI_PL022=y
> CONFIG_SPI_ROCKCHIP=y
> @@ -617,6 +624,7 @@ CONFIG_BRCMSTB_THERMAL=m
> CONFIG_EXYNOS_THERMAL=y
> CONFIG_TEGRA_SOCTHERM=m
> CONFIG_TEGRA_BPMP_THERMAL=m
> +CONFIG_GENERIC_ADC_THERMAL=m
> CONFIG_QCOM_TSENS=y
> CONFIG_QCOM_SPMI_ADC_TM5=m
> CONFIG_QCOM_SPMI_TEMP_ALARM=m
> @@ -701,6 +709,7 @@ CONFIG_USB_VIDEO_CLASS=m
> CONFIG_V4L_PLATFORM_DRIVERS=y
> CONFIG_SDR_PLATFORM_DRIVERS=y
> CONFIG_V4L_MEM2MEM_DRIVERS=y
> +CONFIG_VIDEO_MEDIATEK_JPEG=m
> CONFIG_VIDEO_QCOM_CAMSS=m
> CONFIG_VIDEO_QCOM_VENUS=m
> CONFIG_VIDEO_RCAR_ISP=m
> @@ -763,6 +772,7 @@ CONFIG_DRM_SII902X=m
> CONFIG_DRM_SIMPLE_BRIDGE=m
> CONFIG_DRM_THINE_THC63LVD1024=m
> CONFIG_DRM_TI_SN65DSI86=m
> +CONFIG_DRM_ANALOGIX_ANX7625=m
> CONFIG_DRM_I2C_ADV7511=m
> CONFIG_DRM_I2C_ADV7511_AUDIO=y
> CONFIG_DRM_CDNS_MHDP8546=m
> @@ -805,6 +815,9 @@ CONFIG_SND_SOC_IMX_SGTL5000=m
> CONFIG_SND_SOC_IMX_SPDIF=m
> CONFIG_SND_SOC_FSL_ASOC_CARD=m
> CONFIG_SND_SOC_IMX_AUDMIX=m
> +CONFIG_SND_SOC_MT8183=m
> +CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m
> +CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
> CONFIG_SND_MESON_AXG_SOUND_CARD=m
> CONFIG_SND_MESON_GX_SOUND_CARD=m
> CONFIG_SND_SOC_QCOM=m
> @@ -1113,6 +1126,7 @@ CONFIG_ARM_SMMU_V3=y
> CONFIG_MTK_IOMMU=y
> CONFIG_QCOM_IOMMU=y
> CONFIG_REMOTEPROC=y
> +CONFIG_MTK_SCP=m
> CONFIG_QCOM_Q6V5_ADSP=m
> CONFIG_QCOM_Q6V5_MSS=m
> CONFIG_QCOM_Q6V5_PAS=m
> @@ -1130,8 +1144,10 @@ CONFIG_RASPBERRYPI_POWER=y
> CONFIG_FSL_DPAA=y
> CONFIG_FSL_MC_DPIO=y
> CONFIG_FSL_RCPM=y
> +CONFIG_MTK_CMDQ=m
> CONFIG_MTK_DEVAPC=m
> CONFIG_MTK_PMIC_WRAP=y
> +CONFIG_MTK_SVS=m
> CONFIG_QCOM_AOSS_QMP=y
> CONFIG_QCOM_COMMAND_DB=y
> CONFIG_QCOM_CPR=y
> @@ -1182,6 +1198,7 @@ CONFIG_ARCH_TEGRA_234_SOC=y
> CONFIG_TI_SCI_PM_DOMAINS=y
> CONFIG_ARM_IMX_BUS_DEVFREQ=m
> CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
> +CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
> CONFIG_EXTCON_PTN5150=m
> CONFIG_EXTCON_USB_GPIO=y
> CONFIG_EXTCON_USBC_CROS_EC=y
> @@ -1189,6 +1206,7 @@ CONFIG_RENESAS_RPCIF=m
> CONFIG_IIO=y
> CONFIG_EXYNOS_ADC=y
> CONFIG_MAX9611=m
> +CONFIG_MEDIATEK_MT6577_AUXADC=m
> CONFIG_QCOM_SPMI_VADC=m
> CONFIG_QCOM_SPMI_ADC5=m
> CONFIG_ROCKCHIP_SARADC=m

2022-11-11 14:30:07

by Nícolas F. R. A. Prado

[permalink] [raw]
Subject: Re: [PATCH v2] arm64: defconfig: Enable missing configs for mt8183-jacuzzi-juniper

On Fri, Nov 11, 2022 at 09:42:07AM +0100, Matthias Brugger wrote:
>
>
> On 09/11/2022 20:50, N?colas F. R. A. Prado wrote:
> > Enable missing configs in the arm64 defconfig to get all devices probing
> > on the mt8183-kukui-jacuzzi-juniper machine.
> >
> > The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
> > cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
> > to DP bridge (used for the internal display), MT8183 sound cards, SCP
> > co-processor, MediaTek Global Command Engine (controlled by CMDQ
> > driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
> > and voltage scaling, AUXADC thermal sensors.
> >
> > All symbols are enabled as modules with the exception of SPI, which is
> > enabled as builtin since on some platforms like mt8195-cherry, the
> > ChromeOS Embedded Controller is connected through SPI and it is
> > responsible for the regulators powering the MMC controller used for the
> > SD card, and thus SPI support is required for booting.
> >
> > By enabling the support for all of this machine's devices on the
> > defconfig we make it effortless to test the relevant hardware both by
> > developers as well as CI systems like KernelCI.
> >
> > Signed-off-by: N?colas F. R. A. Prado <[email protected]>
> >
>
> Applied! Next time please make sure to add the linux mediatek mailinglist.

Argh, didn't realize it was missing, I just went with what get_maintainer
listed. Thanks for the heads up, will keep it in mind for next time!

Thanks,
N?colas