From: Nils Carlson <[email protected]>
This patch adds support for 6 ranks per channel to the i5100
chipset. I have tested the patch as far as possible with correctible
errors and things appear good. The DIMM mapping is correct for our
board, but boards may differ.
Signed-off-by: Nils Carlson <[email protected]>
Acked-by: Arthur Jones <[email protected]>
Signed-off-by: Doug Thompson <[email protected]>
---
Index: linux-2.6.31/drivers/edac/i5100_edac.c
===================================================================
--- linux-2.6.31.orig/drivers/edac/i5100_edac.c
+++ linux-2.6.31/drivers/edac/i5100_edac.c
@@ -9,6 +9,11 @@
* Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet
* http://download.intel.com/design/chipsets/datashts/318378.pdf
*
+ * The intel 5100 has two independent channels. EDAC core currently
+ * can not reflect this configuration so instead the chip-select
+ * rows for each respective channel are layed out one after another,
+ * the first half belonging to channel 0, the second half belonging
+ * to channel 1.
*/
#include <linux/module.h>
#include <linux/init.h>
@@ -734,7 +739,6 @@ static int i5100_read_spd_byte(const str
* fill dimm chip select map
*
* FIXME:
- * o only valid for 4 ranks per channel
* o not the only way to may chip selects to dimm slots
* o investigate if there is some way to obtain this map from the bios
*/
@@ -743,8 +747,6 @@ static void __devinit i5100_init_dimm_cs
struct i5100_priv *priv = mci->pvt_info;
int i;
- WARN_ON(priv->ranksperchan != 4);
-
for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) {
int j;
@@ -753,12 +755,21 @@ static void __devinit i5100_init_dimm_cs
}
/* only 2 chip selects per slot... */
- priv->dimm_csmap[0][0] = 0;
- priv->dimm_csmap[0][1] = 3;
- priv->dimm_csmap[1][0] = 1;
- priv->dimm_csmap[1][1] = 2;
- priv->dimm_csmap[2][0] = 2;
- priv->dimm_csmap[3][0] = 3;
+ if (priv->ranksperchan == 4) {
+ priv->dimm_csmap[0][0] = 0;
+ priv->dimm_csmap[0][1] = 3;
+ priv->dimm_csmap[1][0] = 1;
+ priv->dimm_csmap[1][1] = 2;
+ priv->dimm_csmap[2][0] = 2;
+ priv->dimm_csmap[3][0] = 3;
+ } else {
+ priv->dimm_csmap[0][0] = 0;
+ priv->dimm_csmap[0][1] = 1;
+ priv->dimm_csmap[1][0] = 2;
+ priv->dimm_csmap[1][1] = 3;
+ priv->dimm_csmap[2][0] = 4;
+ priv->dimm_csmap[2][1] = 5;
+ }
}
static void __devinit i5100_init_dimm_layout(struct pci_dev *pdev,
@@ -905,13 +916,6 @@ static int __devinit i5100_init_one(stru
pci_read_config_dword(pdev, I5100_MS, &dw);
ranksperch = !!(dw & (1 << 8)) * 2 + 4;
- if (ranksperch != 4) {
- /* FIXME: get 6 ranks / channel to work - need hw... */
- printk(KERN_INFO "i5100_edac: unsupported configuration.\n");
- ret = -ENODEV;
- goto bail_pdev;
- }
-
/* enable error reporting... */
pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
dw &= ~I5100_FERR_NF_MEM_ANY_MASK;