2010-06-08 19:50:03

by Dmytro Milinevskyy

[permalink] [raw]
Subject: [PATCH] Marvell OpenRD-Ultimate machine support

Hi!
This patch adds support for the OpenRD Ultimate machine(could be found at http://www.arm.linux.org.uk/developer/machines/list.php?id=2884)

Besides adding machine description this patch adds correction for PHY address for Ultimate version.

Differences from the previous attempt:
- Applied suggestion from Lennert Buytenhek to change PHY addresses in instances of mv643xx_eth_platform_data in case of ultimate version.

Regards,

-- Dmytro Milinevskyy

Signed-off-by: Dmytro Milinevskyy <[email protected]>
---
arch/arm/mach-kirkwood/Kconfig | 7 ++++++
arch/arm/mach-kirkwood/openrd-setup.c | 34 +++++++++++++++++++++++++++++---
2 files changed, 37 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 29b2163..110a3b8 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -75,6 +75,13 @@ config MACH_OPENRD_CLIENT
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Client Board.

+config MACH_OPENRD_ULTIMATE
+ bool "Marvell OpenRD Ultimate Board"
+ select MACH_OPENRD
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Ultimate Board.
+
config MACH_NETSPACE_V2
bool "LaCie Network Space v2 NAS Board"
help
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index ad3f1ec..5d6797a 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -47,6 +47,14 @@ static struct mv643xx_eth_platform_data openrd_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(24),
};

+static struct mv643xx_eth_platform_data openrd_ultimate_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data openrd_ultimate_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
+};
+
static struct mv_sata_platform_data openrd_sata_data = {
.n_ports = 2,
};
@@ -73,9 +81,14 @@ static void __init openrd_init(void)

kirkwood_ehci_init();

- kirkwood_ge00_init(&openrd_ge00_data);
- if (machine_is_openrd_client())
- kirkwood_ge01_init(&openrd_ge01_data);
+ if (machine_is_openrd_ultimate()) {
+ kirkwood_ge00_init(&openrd_ultimate_ge00_data);
+ kirkwood_ge01_init(&openrd_ultimate_ge01_data);
+ } else {
+ kirkwood_ge00_init(&openrd_ge00_data);
+ if (machine_is_openrd_client())
+ kirkwood_ge01_init(&openrd_ge01_data);
+ }
kirkwood_sata_init(&openrd_sata_data);
kirkwood_sdio_init(&openrd_mvsdio_data);

@@ -84,7 +97,7 @@ static void __init openrd_init(void)

static int __init openrd_pci_init(void)
{
- if (machine_is_openrd_base() || machine_is_openrd_client())
+ if (machine_is_openrd_base() || machine_is_openrd_client() || machine_is_openrd_ultimate())
kirkwood_pcie_init();

return 0;
@@ -116,3 +129,16 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
.timer = &kirkwood_timer,
MACHINE_END
#endif
+
+#ifdef CONFIG_MACH_OPENRD_ULTIMATE
+MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
+ /* Maintainer: Dhaval Vasa <[email protected]> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif
--
1.7.1


2010-06-09 07:25:51

by Lennert Buytenhek

[permalink] [raw]
Subject: Re: [PATCH] Marvell OpenRD-Ultimate machine support

On Tue, Jun 08, 2010 at 10:47:47PM +0300, Dmytro Milinevskyy wrote:

> Differences from the previous attempt:
> - Applied suggestion from Lennert Buytenhek to change PHY addresses in instances of mv643xx_eth_platform_data in case of ultimate version.

The patch looks exactly like the old patch, though?

2010-06-09 07:37:28

by Dmytro Milinevskyy

[permalink] [raw]
Subject: Re: [PATCH] Marvell OpenRD-Ultimate machine support

Oh, I've sent the old version.

My apologies. Will resend the updates version as soon as I get access
to the box.

-- Dima

On Wed, Jun 9, 2010 at 10:25 AM, Lennert Buytenhek
<[email protected]> wrote:
> On Tue, Jun 08, 2010 at 10:47:47PM +0300, Dmytro Milinevskyy wrote:
>
>> Differences from the previous attempt:
>> ?- Applied suggestion from Lennert Buytenhek to change PHY addresses in instances of mv643xx_eth_platform_data in case of ultimate version.
>
> The patch looks exactly like the old patch, though?
>