2016-11-23 14:25:43

by Niklas Cassel

[permalink] [raw]
Subject: [PATCH 3/4] net: stmmac: dwmac-generic: add missing compatible strings

From: Niklas Cassel <[email protected]>

devicetree binding for stmmac states:
- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac"
For backwards compatibility: "st,spear600-gmac" is also supported.

Since dwmac-generic.c calls stmmac_probe_config_dt explicitly,
another alternative would have been to remove all compatible strings
other than "snps,dwmac" and "st,spear600-gmac" from dwmac-generic.c.

However, that would probably do more good than harm, since when trying
to figure out what hardware a certain driver supports, you usually look
at the compatible strings in the struct of_device_id, and not in some
function defined in a completely different file.

No functional change intended.

Signed-off-by: Niklas Cassel <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
index b1e5f24708c9..52cd365b8e5e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
@@ -58,9 +58,12 @@ static int dwmac_generic_probe(struct platform_device *pdev)

static const struct of_device_id dwmac_generic_match[] = {
{ .compatible = "st,spear600-gmac"},
+ { .compatible = "snps,dwmac-3.50a"},
{ .compatible = "snps,dwmac-3.610"},
{ .compatible = "snps,dwmac-3.70a"},
{ .compatible = "snps,dwmac-3.710"},
+ { .compatible = "snps,dwmac-4.00"},
+ { .compatible = "snps,dwmac-4.10a"},
{ .compatible = "snps,dwmac"},
{ }
};
--
2.1.4


2016-11-25 08:56:42

by Peppe CAVALLARO

[permalink] [raw]
Subject: Re: [PATCH 3/4] net: stmmac: dwmac-generic: add missing compatible strings

Hello Niklas

On 11/23/2016 3:25 PM, Niklas Cassel wrote:
> From: Niklas Cassel <[email protected]>
>
> devicetree binding for stmmac states:
> - compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac"
> For backwards compatibility: "st,spear600-gmac" is also supported.
>
> Since dwmac-generic.c calls stmmac_probe_config_dt explicitly,
> another alternative would have been to remove all compatible strings
> other than "snps,dwmac" and "st,spear600-gmac" from dwmac-generic.c.
>
> However, that would probably do more good than harm, since when trying
> to figure out what hardware a certain driver supports, you usually look
> at the compatible strings in the struct of_device_id, and not in some
> function defined in a completely different file.
>
> No functional change intended.
>
> Signed-off-by: Niklas Cassel <[email protected]>

Acked-by: Giuseppe Cavallaro <[email protected]>

> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
> index b1e5f24708c9..52cd365b8e5e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
> @@ -58,9 +58,12 @@ static int dwmac_generic_probe(struct platform_device *pdev)
>
> static const struct of_device_id dwmac_generic_match[] = {
> { .compatible = "st,spear600-gmac"},
> + { .compatible = "snps,dwmac-3.50a"},
> { .compatible = "snps,dwmac-3.610"},
> { .compatible = "snps,dwmac-3.70a"},
> { .compatible = "snps,dwmac-3.710"},
> + { .compatible = "snps,dwmac-4.00"},
> + { .compatible = "snps,dwmac-4.10a"},
> { .compatible = "snps,dwmac"},
> { }
> };
>