This patch set is to add bolero digital macros, WCD and maxim codecs nodes
for audio on sc7280 based platforms.
This patch set depends on:
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=625134
-- https://patchwork.kernel.org/project/alsa-devel/list/?series=625078
-- https://patchwork.kernel.org/project/linux-arm-msm/patch/[email protected]/.
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=601249
-- Clock reset control patches
Changes Since V5:
-- Move soc specific bolero digital codec nodes to soc specific file.
-- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series.
-- Change node name and remove redundant status property in sound node.
Changes Since V4:
-- Update nodes in sorting order.
-- Update DTS node names as per dt-bindings.
-- Update Node properties in proper order.
-- Update missing pinctrl properties like US/EURO HS selection, wcd reset control.
-- Remove redundant labels.
-- Remove unused size cells and address cells in tx macro node.
-- Keep all same nodes at one place, which are defined in same file.
-- Add max98360a codec node to herobrine board specific targets.
Changes Since V3:
-- Move digital codec macro nodes to board specific dtsi file.
-- Update pin controls in lpass cpu node.
-- Update dependency patch list.
-- Create patches on latest kernel.
Changes Since V2:
-- Add power domains to digital codec macro nodes.
-- Change clock node usage in lpass cpu node.
-- Add codec mem clock to lpass cpu node.
-- Modify the node names to be generic.
-- Move sound and codec nodes to root node.
-- sort dai links as per reg.
-- Fix typo errors.
Changes Since V1:
-- Update the commit message of cpu node patch.
-- Add gpio control property to support Euro headset in wcd938x node.
-- Fix clock properties in lpass cpu and digital codec macro node.
Srinivasa Rao Mandadapu (3):
arm64: dts: qcom: sc7280: Add nodes for va tx and rx macros and
external codecs
arm64: dts: qcom: sc7280: Add lpass cpu node
arm64: dts: qcom: sc7280: Add dt nodes for sound card
arch/arm64/boot/dts/qcom/sc7280-crd.dts | 14 ++
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 209 +++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 184 ++++++++++++++++++++++
4 files changed, 415 insertions(+)
--
2.7.4
Add dt nodes for sound card support, which is using WCD938x headset
playback, capture, I2S speaker playback and DMICs via VA macro.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280-crd.dts | 8 +++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++++
2 files changed, 101 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
index 224a82d..b1b968a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -90,6 +90,14 @@ ap_ts_pen_1v8: &i2c13 {
us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
};
+&sound {
+ audio-routing =
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC3", "MIC BIAS3";
+};
+
&tlmm {
tp_int_odl: tp-int-odl {
pins = "gpio7";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index e3d8cbf..45e1d82 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -84,6 +84,99 @@
pinctrl-names = "default";
pinctrl-0 = <&nvme_pwren>;
};
+
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
+
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@1 {
+ link-name = "Secondary MI2S Playback";
+ reg = <MI2S_SECONDARY>;
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@5 {
+ link-name = "DP Playback";
+ reg = <LPASS_DP_RX>;
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+
+ dai-link@6 {
+ link-name = "WCD Playback";
+ reg = <LPASS_CDC_DMA_RX0>;
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr0 0>, <&rxmacro 0>;
+ };
+ };
+
+ dai-link@19 {
+ link-name = "WCD Capture";
+ reg = <LPASS_CDC_DMA_TX3>;
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr1 0>, <&txmacro 0>;
+ };
+ };
+
+ dai-link@25 {
+ link-name = "DMIC Capture";
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&vamacro 0>;
+ };
+ };
+ };
};
&apps_rsc {
--
2.7.4
Add lpass cpu node for audio on sc7280 based platforms.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 28 ++++++++++++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 63 ++++++++++++++++++++++++++++++++
2 files changed, 91 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 83c76b2..e3d8cbf 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -273,6 +273,34 @@
modem-init;
};
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sec_mi2s_data0>, <&sec_mi2s_sclk>, <&sec_mi2s_ws>;
+
+ mi2s-secondary@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ hdmi-primary@5 {
+ reg = <LPASS_DP_RX>;
+ };
+
+ wcd-rx@6 {
+ reg = <LPASS_CDC_DMA_RX0>;
+ };
+
+ wcd-tx@19 {
+ reg = <LPASS_CDC_DMA_TX3>;
+ };
+
+ va-tx@25 {
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ };
+};
+
&lpass_tlmm {
dmic01_active: dmic01-active {
clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 78ec84c..e808d53 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -19,6 +19,7 @@
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,lpass.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -2101,6 +2102,68 @@
#clock-cells = <1>;
};
+ lpass_cpu: audio@3987000 {
+ compatible = "qcom,sc7280-lpass-cpu";
+
+ reg = <0 0x03987000 0 0x68000>,
+ <0 0x03b00000 0 0x29000>,
+ <0 0x03260000 0 0xc000>,
+ <0 0x03280000 0 0x29000>,
+ <0 0x03340000 0 0x29000>,
+ <0 0x0336c000 0 0x3000>;
+
+ reg-names = "lpass-hdmiif",
+ "lpass-lpaif",
+ "lpass-rxtx-cdc-dma-lpm",
+ "lpass-rxtx-lpaif",
+ "lpass-va-lpaif",
+ "lpass-va-cdc-dma-lpm";
+
+ iommus = <&apps_smmu 0x1820 0>,
+ <&apps_smmu 0x1821 0>,
+ <&apps_smmu 0x1832 0>;
+ status = "disabled";
+
+ power-domains = <&rpmhpd SC7280_LCX>;
+ power-domain-names = "lcx";
+ required-opps = <&rpmhpd_opp_nom>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_EXT_MCLK0_CLK>,
+ <&lpasscore LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
+ <&lpasscore LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
+ <&lpasscore LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
+ <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
+ clock-names = "aon_cc_audio_hm_h",
+ "audio_cc_ext_mclk0",
+ "core_cc_sysnoc_mport_core",
+ "core_cc_ext_if0_ibit",
+ "core_cc_ext_if1_ibit",
+ "audio_cc_codec_mem",
+ "audio_cc_codec_mem0",
+ "audio_cc_codec_mem1",
+ "audio_cc_codec_mem2",
+ "aon_cc_va_mem0";
+
+ #sound-dai-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-names = "lpass-irq-lpaif",
+ "lpass-irq-hdmi",
+ "lpass-irq-vaif",
+ "lpass-irq-rxtxif";
+ };
+
lpass_ag_noc: interconnect@3c40000 {
reg = <0 0x03c40000 0 0xf080>;
compatible = "qcom,sc7280-lpass-ag-noc";
--
2.7.4
On Tue, Apr 05, 2022 at 04:43:40PM +0530, Srinivasa Rao Mandadapu wrote:
> Add dt nodes for sound card support, which is using WCD938x headset
> playback, capture, I2S speaker playback and DMICs via VA macro.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sc7280-crd.dts | 8 +++
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++++
> 2 files changed, 101 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> index 224a82d..b1b968a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> @@ -90,6 +90,14 @@ ap_ts_pen_1v8: &i2c13 {
> us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
> };
>
> +&sound {
> + audio-routing =
> + "VA DMIC0", "MIC BIAS1",
> + "VA DMIC1", "MIC BIAS1",
> + "VA DMIC2", "MIC BIAS3",
> + "VA DMIC3", "MIC BIAS3";
> +};
> +
> &tlmm {
> tp_int_odl: tp-int-odl {
> pins = "gpio7";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index e3d8cbf..45e1d82 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -84,6 +84,99 @@
> pinctrl-names = "default";
> pinctrl-0 = <&nvme_pwren>;
> };
> +
> + sound: sound {
> + compatible = "google,sc7280-herobrine";
> + model = "sc7280-wcd938x-max98360a-1mic";
> +
> + audio-routing =
> + "IN1_HPHL", "HPHL_OUT",
> + "IN2_HPHR", "HPHR_OUT",
> + "AMIC1", "MIC BIAS1",
> + "AMIC2", "MIC BIAS2",
> + "VA DMIC0", "MIC BIAS3",
> + "VA DMIC1", "MIC BIAS3",
> + "VA DMIC2", "MIC BIAS1",
> + "VA DMIC3", "MIC BIAS1",
> + "TX SWR_ADC0", "ADC1_OUTPUT",
> + "TX SWR_ADC1", "ADC2_OUTPUT",
> + "TX SWR_ADC2", "ADC3_OUTPUT",
> + "TX SWR_DMIC0", "DMIC1_OUTPUT",
> + "TX SWR_DMIC1", "DMIC2_OUTPUT",
> + "TX SWR_DMIC2", "DMIC3_OUTPUT",
> + "TX SWR_DMIC3", "DMIC4_OUTPUT",
> + "TX SWR_DMIC4", "DMIC5_OUTPUT",
> + "TX SWR_DMIC5", "DMIC6_OUTPUT",
> + "TX SWR_DMIC6", "DMIC7_OUTPUT",
> + "TX SWR_DMIC7", "DMIC8_OUTPUT";
> +
> + qcom,msm-mbhc-hphl-swh = <1>;
> + qcom,msm-mbhc-gnd-swh = <1>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #sound-dai-cells = <0>;
> +
> + dai-link@1 {
> + link-name = "Secondary MI2S Playback";
The other link names provide information about the other end
of the link (DP, WCD, DMIC), while this one describes the SoC side.
Shouldn't this be "MAX98360A"? Not sure about the 'Playback' part,
it seems 'link-name' is used as stream name, judging from a few
samples of peeking into '/proc/asound/pcm' on different devices
it seems that 'Playback' or 'Capture' is ususally not part of the
stream name.
> + reg = <MI2S_SECONDARY>;
> + cpu {
> + sound-dai = <&lpass_cpu MI2S_SECONDARY>;
> + };
> +
> + codec {
> + sound-dai = <&max98360a>;
> + };
> + };
> +
> + dai-link@5 {
> + link-name = "DP Playback";
See comment above about 'Playback'. Just 'DP' is maybe a bit short, how
about 'DisplayPort'?
> + reg = <LPASS_DP_RX>;
> + cpu {
> + sound-dai = <&lpass_cpu LPASS_DP_RX>;
> + };
> +
> + codec {
> + sound-dai = <&mdss_dp>;
> + };
> + };
> +
> + dai-link@6 {
> + link-name = "WCD Playback";
Most instances I found spell out the codec name. It seems here we need
the 'Playback'/'Capture' info (or something else) to not end up with
duplicate link names. So my suggestion here would be "WCD9385 Playback".
> + reg = <LPASS_CDC_DMA_RX0>;
> + cpu {
> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
> + };
> +
> + codec {
> + sound-dai = <&wcd938x 0>, <&swr0 0>, <&rxmacro 0>;
> + };
> + };
> +
> + dai-link@19 {
> + link-name = "WCD Capture";
"WCD9385 Capture"?
> + reg = <LPASS_CDC_DMA_TX3>;
> + cpu {
> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
> + };
> +
> + codec {
> + sound-dai = <&wcd938x 1>, <&swr1 0>, <&txmacro 0>;
> + };
> + };
> +
> + dai-link@25 {
> + link-name = "DMIC Capture";
just "DMIC"?
On 4/7/2022 2:15 AM, Matthias Kaehlcke wrote:
Thanks for your time Matthias!!!
> On Tue, Apr 05, 2022 at 04:43:40PM +0530, Srinivasa Rao Mandadapu wrote:
>> Add dt nodes for sound card support, which is using WCD938x headset
>> playback, capture, I2S speaker playback and DMICs via VA macro.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>> Co-developed-by: Venkata Prasad Potturu <[email protected]>
>> Signed-off-by: Venkata Prasad Potturu <[email protected]>
>> ---
>> arch/arm64/boot/dts/qcom/sc7280-crd.dts | 8 +++
>> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++++
>> 2 files changed, 101 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
>> index 224a82d..b1b968a 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
>> @@ -90,6 +90,14 @@ ap_ts_pen_1v8: &i2c13 {
>> us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
>> };
>>
>> +&sound {
>> + audio-routing =
>> + "VA DMIC0", "MIC BIAS1",
>> + "VA DMIC1", "MIC BIAS1",
>> + "VA DMIC2", "MIC BIAS3",
>> + "VA DMIC3", "MIC BIAS3";
>> +};
>> +
>> &tlmm {
>> tp_int_odl: tp-int-odl {
>> pins = "gpio7";
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> index e3d8cbf..45e1d82 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> @@ -84,6 +84,99 @@
>> pinctrl-names = "default";
>> pinctrl-0 = <&nvme_pwren>;
>> };
>> +
>> + sound: sound {
>> + compatible = "google,sc7280-herobrine";
>> + model = "sc7280-wcd938x-max98360a-1mic";
>> +
>> + audio-routing =
>> + "IN1_HPHL", "HPHL_OUT",
>> + "IN2_HPHR", "HPHR_OUT",
>> + "AMIC1", "MIC BIAS1",
>> + "AMIC2", "MIC BIAS2",
>> + "VA DMIC0", "MIC BIAS3",
>> + "VA DMIC1", "MIC BIAS3",
>> + "VA DMIC2", "MIC BIAS1",
>> + "VA DMIC3", "MIC BIAS1",
>> + "TX SWR_ADC0", "ADC1_OUTPUT",
>> + "TX SWR_ADC1", "ADC2_OUTPUT",
>> + "TX SWR_ADC2", "ADC3_OUTPUT",
>> + "TX SWR_DMIC0", "DMIC1_OUTPUT",
>> + "TX SWR_DMIC1", "DMIC2_OUTPUT",
>> + "TX SWR_DMIC2", "DMIC3_OUTPUT",
>> + "TX SWR_DMIC3", "DMIC4_OUTPUT",
>> + "TX SWR_DMIC4", "DMIC5_OUTPUT",
>> + "TX SWR_DMIC5", "DMIC6_OUTPUT",
>> + "TX SWR_DMIC6", "DMIC7_OUTPUT",
>> + "TX SWR_DMIC7", "DMIC8_OUTPUT";
>> +
>> + qcom,msm-mbhc-hphl-swh = <1>;
>> + qcom,msm-mbhc-gnd-swh = <1>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #sound-dai-cells = <0>;
>> +
>> + dai-link@1 {
>> + link-name = "Secondary MI2S Playback";
> The other link names provide information about the other end
> of the link (DP, WCD, DMIC), while this one describes the SoC side.
> Shouldn't this be "MAX98360A"? Not sure about the 'Playback' part,
> it seems 'link-name' is used as stream name, judging from a few
> samples of peeking into '/proc/asound/pcm' on different devices
> it seems that 'Playback' or 'Capture' is ususally not part of the
> stream name.
Okay. will change accordingly.
>
>> + reg = <MI2S_SECONDARY>;
>> + cpu {
>> + sound-dai = <&lpass_cpu MI2S_SECONDARY>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&max98360a>;
>> + };
>> + };
>> +
>> + dai-link@5 {
>> + link-name = "DP Playback";
> See comment above about 'Playback'. Just 'DP' is maybe a bit short, how
> about 'DisplayPort'?
Okay. Will change accordingly.
>
>> + reg = <LPASS_DP_RX>;
>> + cpu {
>> + sound-dai = <&lpass_cpu LPASS_DP_RX>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&mdss_dp>;
>> + };
>> + };
>> +
>> + dai-link@6 {
>> + link-name = "WCD Playback";
> Most instances I found spell out the codec name. It seems here we need
> the 'Playback'/'Capture' info (or something else) to not end up with
> duplicate link names. So my suggestion here would be "WCD9385 Playback".
Okay. Will update accordingly.
>
>> + reg = <LPASS_CDC_DMA_RX0>;
>> + cpu {
>> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&wcd938x 0>, <&swr0 0>, <&rxmacro 0>;
>> + };
>> + };
>> +
>> + dai-link@19 {
>> + link-name = "WCD Capture";
> "WCD9385 Capture"?
Okay.
>
>> + reg = <LPASS_CDC_DMA_TX3>;
>> + cpu {
>> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&wcd938x 1>, <&swr1 0>, <&txmacro 0>;
>> + };
>> + };
>> +
>> + dai-link@25 {
>> + link-name = "DMIC Capture";
>
> just "DMIC"?
Okay.