When tearing down the n_gsm ldisc while one or more of its child ports
are open, a lock dep warning occurs:
[ 56.254258] ======================================================
[ 56.260447] WARNING: possible circular locking dependency detected
[ 56.266641] 5.2.0-00118-g1fd58e20e5b0 #30 Not tainted
[ 56.271701] ------------------------------------------------------
[ 56.277890] cmux/271 is trying to acquire lock:
[ 56.282436] 8215283a (&tty->legacy_mutex){+.+.}, at: __tty_hangup.part.0+0x58/0x27c
[ 56.290128]
[ 56.290128] but task is already holding lock:
[ 56.295970] e9e2b842 (&gsm->mutex){+.+.}, at: gsm_cleanup_mux+0x9c/0x15c
[ 56.302699]
[ 56.302699] which lock already depends on the new lock.
[ 56.302699]
[ 56.310884]
[ 56.310884] the existing dependency chain (in reverse order) is:
[ 56.318372]
[ 56.318372] -> #2 (&gsm->mutex){+.+.}:
[ 56.323624] mutex_lock_nested+0x1c/0x24
[ 56.328079] gsm_cleanup_mux+0x9c/0x15c
[ 56.332448] gsmld_ioctl+0x418/0x4e8
[ 56.336554] tty_ioctl+0x96c/0xcb0
[ 56.340492] do_vfs_ioctl+0x41c/0xa5c
[ 56.344685] ksys_ioctl+0x34/0x60
[ 56.348535] ret_fast_syscall+0x0/0x28
[ 56.352815] 0xbe97cc04
[ 56.355791]
[ 56.355791] -> #1 (&tty->ldisc_sem){++++}:
[ 56.361388] tty_ldisc_lock+0x50/0x74
[ 56.365581] tty_init_dev+0x88/0x1c4
[ 56.369687] tty_open+0x1c8/0x430
[ 56.373536] chrdev_open+0xa8/0x19c
[ 56.377560] do_dentry_open+0x118/0x3c4
[ 56.381928] path_openat+0x2fc/0x1190
[ 56.386123] do_filp_open+0x68/0xd4
[ 56.390146] do_sys_open+0x164/0x220
[ 56.394257] kernel_init_freeable+0x328/0x3e4
[ 56.399146] kernel_init+0x8/0x110
[ 56.403078] ret_from_fork+0x14/0x20
[ 56.407183] 0x0
[ 56.409548]
[ 56.409548] -> #0 (&tty->legacy_mutex){+.+.}:
[ 56.415402] __mutex_lock+0x64/0x90c
[ 56.419508] mutex_lock_nested+0x1c/0x24
[ 56.423961] __tty_hangup.part.0+0x58/0x27c
[ 56.428676] gsm_cleanup_mux+0xe8/0x15c
[ 56.433043] gsmld_close+0x48/0x90
[ 56.436979] tty_ldisc_kill+0x2c/0x6c
[ 56.441173] tty_ldisc_release+0x88/0x194
[ 56.445715] tty_release_struct+0x14/0x44
[ 56.450254] tty_release+0x36c/0x43c
[ 56.454365] __fput+0x94/0x1e8
Avoid the warning by doing the port hangup asynchronously.
Signed-off-by: Martin Hundebøll <[email protected]>
---
drivers/tty/n_gsm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index d30525946892..36a3eb4ad4c5 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1716,7 +1716,7 @@ static void gsm_dlci_release(struct gsm_dlci *dlci)
gsm_destroy_network(dlci);
mutex_unlock(&dlci->mutex);
- tty_vhangup(tty);
+ tty_hangup(tty);
tty_port_tty_set(&dlci->port, NULL);
tty_kref_put(tty);
--
2.22.1
On 22/08/2019 23.56, Martin Hundebøll wrote:
> When tearing down the n_gsm ldisc while one or more of its child ports
> are open, a lock dep warning occurs:
>
> [ 56.254258] ======================================================
> [ 56.260447] WARNING: possible circular locking dependency detected
> [ 56.266641] 5.2.0-00118-g1fd58e20e5b0 #30 Not tainted
> [ 56.271701] ------------------------------------------------------
> [ 56.277890] cmux/271 is trying to acquire lock:
> [ 56.282436] 8215283a (&tty->legacy_mutex){+.+.}, at: __tty_hangup.part.0+0x58/0x27c
> [ 56.290128]
> [ 56.290128] but task is already holding lock:
> [ 56.295970] e9e2b842 (&gsm->mutex){+.+.}, at: gsm_cleanup_mux+0x9c/0x15c
> [ 56.302699]
> [ 56.302699] which lock already depends on the new lock.
> [ 56.302699]
> [ 56.310884]
> [ 56.310884] the existing dependency chain (in reverse order) is:
> [ 56.318372]
> [ 56.318372] -> #2 (&gsm->mutex){+.+.}:
> [ 56.323624] mutex_lock_nested+0x1c/0x24
> [ 56.328079] gsm_cleanup_mux+0x9c/0x15c
> [ 56.332448] gsmld_ioctl+0x418/0x4e8
> [ 56.336554] tty_ioctl+0x96c/0xcb0
> [ 56.340492] do_vfs_ioctl+0x41c/0xa5c
> [ 56.344685] ksys_ioctl+0x34/0x60
> [ 56.348535] ret_fast_syscall+0x0/0x28
> [ 56.352815] 0xbe97cc04
> [ 56.355791]
> [ 56.355791] -> #1 (&tty->ldisc_sem){++++}:
> [ 56.361388] tty_ldisc_lock+0x50/0x74
> [ 56.365581] tty_init_dev+0x88/0x1c4
> [ 56.369687] tty_open+0x1c8/0x430
> [ 56.373536] chrdev_open+0xa8/0x19c
> [ 56.377560] do_dentry_open+0x118/0x3c4
> [ 56.381928] path_openat+0x2fc/0x1190
> [ 56.386123] do_filp_open+0x68/0xd4
> [ 56.390146] do_sys_open+0x164/0x220
> [ 56.394257] kernel_init_freeable+0x328/0x3e4
> [ 56.399146] kernel_init+0x8/0x110
> [ 56.403078] ret_from_fork+0x14/0x20
> [ 56.407183] 0x0
> [ 56.409548]
> [ 56.409548] -> #0 (&tty->legacy_mutex){+.+.}:
> [ 56.415402] __mutex_lock+0x64/0x90c
> [ 56.419508] mutex_lock_nested+0x1c/0x24
> [ 56.423961] __tty_hangup.part.0+0x58/0x27c
> [ 56.428676] gsm_cleanup_mux+0xe8/0x15c
> [ 56.433043] gsmld_close+0x48/0x90
> [ 56.436979] tty_ldisc_kill+0x2c/0x6c
> [ 56.441173] tty_ldisc_release+0x88/0x194
> [ 56.445715] tty_release_struct+0x14/0x44
> [ 56.450254] tty_release+0x36c/0x43c
> [ 56.454365] __fput+0x94/0x1e8
>
> Avoid the warning by doing the port hangup asynchronously.
Any comments?
// Martin
> Signed-off-by: Martin Hundebøll <[email protected]>
> ---
> drivers/tty/n_gsm.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
> index d30525946892..36a3eb4ad4c5 100644
> --- a/drivers/tty/n_gsm.c
> +++ b/drivers/tty/n_gsm.c
> @@ -1716,7 +1716,7 @@ static void gsm_dlci_release(struct gsm_dlci *dlci)
> gsm_destroy_network(dlci);
> mutex_unlock(&dlci->mutex);
>
> - tty_vhangup(tty);
> + tty_hangup(tty);
>
> tty_port_tty_set(&dlci->port, NULL);
> tty_kref_put(tty);
>
On Thu, Aug 29, 2019 at 09:42:31PM +0200, Martin Hundeb?ll wrote:
> On 22/08/2019 23.56, Martin Hundeb?ll wrote:
> > When tearing down the n_gsm ldisc while one or more of its child ports
> > are open, a lock dep warning occurs:
> >
> > [ 56.254258] ======================================================
> > [ 56.260447] WARNING: possible circular locking dependency detected
> > [ 56.266641] 5.2.0-00118-g1fd58e20e5b0 #30 Not tainted
> > [ 56.271701] ------------------------------------------------------
> > [ 56.277890] cmux/271 is trying to acquire lock:
> > [ 56.282436] 8215283a (&tty->legacy_mutex){+.+.}, at: __tty_hangup.part.0+0x58/0x27c
> > [ 56.290128]
> > [ 56.290128] but task is already holding lock:
> > [ 56.295970] e9e2b842 (&gsm->mutex){+.+.}, at: gsm_cleanup_mux+0x9c/0x15c
> > [ 56.302699]
> > [ 56.302699] which lock already depends on the new lock.
> > [ 56.302699]
> > [ 56.310884]
> > [ 56.310884] the existing dependency chain (in reverse order) is:
> > [ 56.318372]
> > [ 56.318372] -> #2 (&gsm->mutex){+.+.}:
> > [ 56.323624] mutex_lock_nested+0x1c/0x24
> > [ 56.328079] gsm_cleanup_mux+0x9c/0x15c
> > [ 56.332448] gsmld_ioctl+0x418/0x4e8
> > [ 56.336554] tty_ioctl+0x96c/0xcb0
> > [ 56.340492] do_vfs_ioctl+0x41c/0xa5c
> > [ 56.344685] ksys_ioctl+0x34/0x60
> > [ 56.348535] ret_fast_syscall+0x0/0x28
> > [ 56.352815] 0xbe97cc04
> > [ 56.355791]
> > [ 56.355791] -> #1 (&tty->ldisc_sem){++++}:
> > [ 56.361388] tty_ldisc_lock+0x50/0x74
> > [ 56.365581] tty_init_dev+0x88/0x1c4
> > [ 56.369687] tty_open+0x1c8/0x430
> > [ 56.373536] chrdev_open+0xa8/0x19c
> > [ 56.377560] do_dentry_open+0x118/0x3c4
> > [ 56.381928] path_openat+0x2fc/0x1190
> > [ 56.386123] do_filp_open+0x68/0xd4
> > [ 56.390146] do_sys_open+0x164/0x220
> > [ 56.394257] kernel_init_freeable+0x328/0x3e4
> > [ 56.399146] kernel_init+0x8/0x110
> > [ 56.403078] ret_from_fork+0x14/0x20
> > [ 56.407183] 0x0
> > [ 56.409548]
> > [ 56.409548] -> #0 (&tty->legacy_mutex){+.+.}:
> > [ 56.415402] __mutex_lock+0x64/0x90c
> > [ 56.419508] mutex_lock_nested+0x1c/0x24
> > [ 56.423961] __tty_hangup.part.0+0x58/0x27c
> > [ 56.428676] gsm_cleanup_mux+0xe8/0x15c
> > [ 56.433043] gsmld_close+0x48/0x90
> > [ 56.436979] tty_ldisc_kill+0x2c/0x6c
> > [ 56.441173] tty_ldisc_release+0x88/0x194
> > [ 56.445715] tty_release_struct+0x14/0x44
> > [ 56.450254] tty_release+0x36c/0x43c
> > [ 56.454365] __fput+0x94/0x1e8
> >
> > Avoid the warning by doing the port hangup asynchronously.
>
> Any comments?
Sorry, was waiting to see if anyone would review this, I'll go do it
later today...
On 29. 08. 19, 21:42, Martin Hundebøll wrote:
> On 22/08/2019 23.56, Martin Hundebøll wrote:
>> When tearing down the n_gsm ldisc while one or more of its child ports
>> are open, a lock dep warning occurs:
>>
>> [ 56.254258] ======================================================
>> [ 56.260447] WARNING: possible circular locking dependency detected
>> [ 56.266641] 5.2.0-00118-g1fd58e20e5b0 #30 Not tainted
>> [ 56.271701] ------------------------------------------------------
>> [ 56.277890] cmux/271 is trying to acquire lock:
>> [ 56.282436] 8215283a (&tty->legacy_mutex){+.+.}, at:
>> __tty_hangup.part.0+0x58/0x27c
>> [ 56.290128]
>> [ 56.290128] but task is already holding lock:
>> [ 56.295970] e9e2b842 (&gsm->mutex){+.+.}, at:
>> gsm_cleanup_mux+0x9c/0x15c
>> [ 56.302699]
>> [ 56.302699] which lock already depends on the new lock.
>> [ 56.302699]
>> [ 56.310884]
>> [ 56.310884] the existing dependency chain (in reverse order) is:
>> [ 56.318372]
>> [ 56.318372] -> #2 (&gsm->mutex){+.+.}:
>> [ 56.323624] mutex_lock_nested+0x1c/0x24
>> [ 56.328079] gsm_cleanup_mux+0x9c/0x15c
>> [ 56.332448] gsmld_ioctl+0x418/0x4e8
>> [ 56.336554] tty_ioctl+0x96c/0xcb0
>> [ 56.340492] do_vfs_ioctl+0x41c/0xa5c
>> [ 56.344685] ksys_ioctl+0x34/0x60
>> [ 56.348535] ret_fast_syscall+0x0/0x28
>> [ 56.352815] 0xbe97cc04
>> [ 56.355791]
>> [ 56.355791] -> #1 (&tty->ldisc_sem){++++}:
>> [ 56.361388] tty_ldisc_lock+0x50/0x74
>> [ 56.365581] tty_init_dev+0x88/0x1c4
>> [ 56.369687] tty_open+0x1c8/0x430
>> [ 56.373536] chrdev_open+0xa8/0x19c
>> [ 56.377560] do_dentry_open+0x118/0x3c4
>> [ 56.381928] path_openat+0x2fc/0x1190
>> [ 56.386123] do_filp_open+0x68/0xd4
>> [ 56.390146] do_sys_open+0x164/0x220
>> [ 56.394257] kernel_init_freeable+0x328/0x3e4
>> [ 56.399146] kernel_init+0x8/0x110
>> [ 56.403078] ret_from_fork+0x14/0x20
>> [ 56.407183] 0x0
>> [ 56.409548]
>> [ 56.409548] -> #0 (&tty->legacy_mutex){+.+.}:
>> [ 56.415402] __mutex_lock+0x64/0x90c
>> [ 56.419508] mutex_lock_nested+0x1c/0x24
>> [ 56.423961] __tty_hangup.part.0+0x58/0x27c
>> [ 56.428676] gsm_cleanup_mux+0xe8/0x15c
>> [ 56.433043] gsmld_close+0x48/0x90
>> [ 56.436979] tty_ldisc_kill+0x2c/0x6c
>> [ 56.441173] tty_ldisc_release+0x88/0x194
>> [ 56.445715] tty_release_struct+0x14/0x44
>> [ 56.450254] tty_release+0x36c/0x43c
>> [ 56.454365] __fput+0x94/0x1e8
>>
>> Avoid the warning by doing the port hangup asynchronously.
>
> Any comments?
I did not manage to reply before vacation, and after having "work =
NULL" in my head, I forgot, sorry.
At the same time, I am a bit lost in the lockdep chain above. It mixes
close (#0), open (#1) and ioctl (#2), so how is this a "chain" in the
first place?
BTW, do you see an actual deadlock? And what tty driver do you use for
backend devices? I.e. what ttys do you set this ldisc to?
See also the comment below.
>> Signed-off-by: Martin Hundebøll <[email protected]>
>> ---
>> drivers/tty/n_gsm.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
>> index d30525946892..36a3eb4ad4c5 100644
>> --- a/drivers/tty/n_gsm.c
>> +++ b/drivers/tty/n_gsm.c
>> @@ -1716,7 +1716,7 @@ static void gsm_dlci_release(struct gsm_dlci *dlci)
>> gsm_destroy_network(dlci);
>> mutex_unlock(&dlci->mutex);
>> - tty_vhangup(tty);
>> + tty_hangup(tty);
>> tty_port_tty_set(&dlci->port, NULL);
I am afraid there is changed semantics now: the scheduled hangup will
likely happen when the tty in tty_port is set to NULL already, so some
operations done in tty->ops->hangup might be a nop now. For example the
commonly used tty_port_hangup won't set TTY_IO_ERROR on the tty and
won't lower DTR and RTS on the line either.
>> tty_kref_put(tty);
thanks,
--
js
suse labs
On 04/09/2019 10.18, Jiri Slaby wrote:
> On 29. 08. 19, 21:42, Martin Hundebøll wrote:
>> On 22/08/2019 23.56, Martin Hundebøll wrote:
>>> When tearing down the n_gsm ldisc while one or more of its child ports
>>> are open, a lock dep warning occurs:
>>>
>>> [ 56.254258] ======================================================
>>> [ 56.260447] WARNING: possible circular locking dependency detected
>>> [ 56.266641] 5.2.0-00118-g1fd58e20e5b0 #30 Not tainted
>>> [ 56.271701] ------------------------------------------------------
>>> [ 56.277890] cmux/271 is trying to acquire lock:
>>> [ 56.282436] 8215283a (&tty->legacy_mutex){+.+.}, at:
>>> __tty_hangup.part.0+0x58/0x27c
>>> [ 56.290128]
>>> [ 56.290128] but task is already holding lock:
>>> [ 56.295970] e9e2b842 (&gsm->mutex){+.+.}, at:
>>> gsm_cleanup_mux+0x9c/0x15c
>>> [ 56.302699]
>>> [ 56.302699] which lock already depends on the new lock.
>>> [ 56.302699]
>>> [ 56.310884]
>>> [ 56.310884] the existing dependency chain (in reverse order) is:
>>> [ 56.318372]
>>> [ 56.318372] -> #2 (&gsm->mutex){+.+.}:
>>> [ 56.323624] mutex_lock_nested+0x1c/0x24
>>> [ 56.328079] gsm_cleanup_mux+0x9c/0x15c
>>> [ 56.332448] gsmld_ioctl+0x418/0x4e8
>>> [ 56.336554] tty_ioctl+0x96c/0xcb0
>>> [ 56.340492] do_vfs_ioctl+0x41c/0xa5c
>>> [ 56.344685] ksys_ioctl+0x34/0x60
>>> [ 56.348535] ret_fast_syscall+0x0/0x28
>>> [ 56.352815] 0xbe97cc04
>>> [ 56.355791]
>>> [ 56.355791] -> #1 (&tty->ldisc_sem){++++}:
>>> [ 56.361388] tty_ldisc_lock+0x50/0x74
>>> [ 56.365581] tty_init_dev+0x88/0x1c4
>>> [ 56.369687] tty_open+0x1c8/0x430
>>> [ 56.373536] chrdev_open+0xa8/0x19c
>>> [ 56.377560] do_dentry_open+0x118/0x3c4
>>> [ 56.381928] path_openat+0x2fc/0x1190
>>> [ 56.386123] do_filp_open+0x68/0xd4
>>> [ 56.390146] do_sys_open+0x164/0x220
>>> [ 56.394257] kernel_init_freeable+0x328/0x3e4
>>> [ 56.399146] kernel_init+0x8/0x110
>>> [ 56.403078] ret_from_fork+0x14/0x20
>>> [ 56.407183] 0x0
>>> [ 56.409548]
>>> [ 56.409548] -> #0 (&tty->legacy_mutex){+.+.}:
>>> [ 56.415402] __mutex_lock+0x64/0x90c
>>> [ 56.419508] mutex_lock_nested+0x1c/0x24
>>> [ 56.423961] __tty_hangup.part.0+0x58/0x27c
>>> [ 56.428676] gsm_cleanup_mux+0xe8/0x15c
>>> [ 56.433043] gsmld_close+0x48/0x90
>>> [ 56.436979] tty_ldisc_kill+0x2c/0x6c
>>> [ 56.441173] tty_ldisc_release+0x88/0x194
>>> [ 56.445715] tty_release_struct+0x14/0x44
>>> [ 56.450254] tty_release+0x36c/0x43c
>>> [ 56.454365] __fput+0x94/0x1e8
>>>
>>> Avoid the warning by doing the port hangup asynchronously.
>>
>> Any comments?
>
> I did not manage to reply before vacation, and after having "work =
> NULL" in my head, I forgot, sorry.
>
> At the same time, I am a bit lost in the lockdep chain above. It mixes
> close (#0), open (#1) and ioctl (#2), so how is this a "chain" in the
> first place?
The close is from my cmux program, that configured the line discpline.
The open could be from my other process reading the virtual tty
(gsmtty1)? Or is it a lock taken during the opening of the physical tty?
Can the ioctl call used to configure the line discipline take a lock
that is not released until the line discipline is changed back?
> BTW, do you see an actual deadlock? And what tty driver do you use for
> backend devices? I.e. what ttys do you set this ldisc to?
After the first deadlock, I can use the UART, and configure GSM0710
multiplexing again, but the virtual tty's don't work:
root@iwg26:~# cat /dev/gsmtty1
cat: can't open '/dev/gsmtty1': Protocol driver not attached
This is on an i.MX6 ULL using its imx uart driver
(drivers/tty/serial/imx.c).
> See also the comment below.
>
>>> Signed-off-by: Martin Hundebøll <[email protected]>
>>> ---
>>> drivers/tty/n_gsm.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
>>> index d30525946892..36a3eb4ad4c5 100644
>>> --- a/drivers/tty/n_gsm.c
>>> +++ b/drivers/tty/n_gsm.c
>>> @@ -1716,7 +1716,7 @@ static void gsm_dlci_release(struct gsm_dlci *dlci)
>>> gsm_destroy_network(dlci);
>>> mutex_unlock(&dlci->mutex);
>>> - tty_vhangup(tty);
>>> + tty_hangup(tty);
>>> tty_port_tty_set(&dlci->port, NULL);
>
> I am afraid there is changed semantics now: the scheduled hangup will
> likely happen when the tty in tty_port is set to NULL already, so some
> operations done in tty->ops->hangup might be a nop now. For example the
> commonly used tty_port_hangup won't set TTY_IO_ERROR on the tty and
> won't lower DTR and RTS on the line either.
Is the hangup for the physical uart (ttymxc0), or the virtual ttys
(gsmtty1)? In the latter case there wouldn't be any control lines to reset.
Thanks,
Martin