2022-06-04 12:59:11

by Arnaud Pouliquen

[permalink] [raw]
Subject: [PATCH v6 0/4] remoteproc: restructure the remoteproc VirtIO device

1) Update from V5 [1]:

Updates based on Mathieu's comments.
Updates are listed in the commit message of each patch.

[1] https://lkml.org/lkml/2022/4/6/597

2) Patchset description:

This series is a part of the work initiated a long time ago in
the series "remoteproc: Decorelate virtio from core"[2]

Objective of the work:
- Update the remoteproc VirtIO device creation (use platform device)
- Allow to declare remoteproc VirtIO device in DT
- declare resources associated to a remote proc VirtIO
- declare a list of VirtIO supported by the platform.
- Prepare the enhancement to more VirtIO devices (e.g I2C, audio, video, ...).
For instance be able to declare a I2C device in a virtio-i2C node.
- Keep the legacy working!
- Try to improve the picture about concerns reported by Christoph Hellwing [3][4]

[2] https://lkml.org/lkml/2020/4/16/1817
[3] https://lkml.org/lkml/2021/6/23/607
[4] https://patchwork.kernel.org/project/linux-remoteproc/patch/[email protected]/

In term of device tree this would result in such hierarchy (stm32mp1 example with 2 virtio RPMSG):

m4_rproc: m4@10000000 {
compatible = "st,stm32mp1-m4";
reg = <0x10000000 0x40000>,
<0x30000000 0x40000>,
<0x38000000 0x10000>;
memory-region = <&retram>, <&mcuram>,<&mcuram2>;
mboxes = <&ipcc 2>, <&ipcc 3>;
mbox-names = "shutdown", "detach";
status = "okay";

#address-cells = <1>;
#size-cells = <0>;

vdev@0 {
compatible = "rproc-virtio";
reg = <0>;
virtio,id = <7>; /* RPMSG */
memory-region = <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>;
mboxes = <&ipcc 0>, <&ipcc 1>;
mbox-names = "vq0", "vq1";
status = "okay";
};

vdev@1 {
compatible = "rproc-virtio";
reg = <1>;
virtio,id = <7>; /*RPMSG */
memory-region = <&vdev1vring0>, <&vdev1vring1>, <&vdev1buffer>;
mboxes = <&ipcc 4>, <&ipcc 5>;
mbox-names = "vq0", "vq1";
status = "okay";
};
};

I have divided the work in 4 steps to simplify the review, This series implements only
the step 1:
step 1: redefine the remoteproc VirtIO device as a platform device
- migrate rvdev management in remoteproc virtio.c,
- create a remotproc virtio config ( can be disabled for platform that not use VirtIO IPC.
step 2: add possibility to declare and probe a VirtIO sub node
- VirtIO bindings declaration,
- multi DT VirtIO devices support,
- introduction of a remote proc virtio bind device mechanism ,
=> https://github.com/arnopo/linux/commits/step2-virtio-in-DT
step 3: Add memory declaration in VirtIO subnode
=> https://github.com/arnopo/linux/commits/step3-virtio-memories
step 4: Add mailbox declaration in VirtIO subnode
=> https://github.com/arnopo/linux/commits/step4-virtio-mailboxes

Arnaud Pouliquen (4):
remoteproc: core: Introduce rproc_rvdev_add_device function
remoteproc: core: Introduce rproc_add_rvdev function
remoteproc: Move rproc_vdev management to remoteproc_virtio.c
remoteproc: virtio: Create platform device for the remoteproc_virtio

drivers/remoteproc/remoteproc_core.c | 153 +++---------------
drivers/remoteproc/remoteproc_internal.h | 23 ++-
drivers/remoteproc/remoteproc_virtio.c | 188 ++++++++++++++++++++---
include/linux/remoteproc.h | 6 +-
4 files changed, 209 insertions(+), 161 deletions(-)

--
2.24.3


2022-06-06 04:52:47

by Arnaud Pouliquen

[permalink] [raw]
Subject: [PATCH v6 1/4] remoteproc: core: Introduce rproc_rvdev_add_device function

In preparation of the migration of the management of rvdev in
remoteproc_virtio.c, this patch spins off a new function to manage the
remoteproc virtio device creation.

The rproc_rvdev_add_device will be moved to remoteproc_virtio.c.

The rproc_vdev_data structure is introduced to provide information for
the rvdev creation. This structure allows to manage the rvdev and vrings
allocation in the rproc_rvdev_add_device function.

Signed-off-by: Arnaud Pouliquen <[email protected]>
---
Updates vs previous revision (based on Mathieu Poirier's comments):
- rproc_vdev_data struct change index field type to u32
- remove rproc_rvdev_remove_device function creation
---
drivers/remoteproc/remoteproc_core.c | 145 +++++++++++++----------
drivers/remoteproc/remoteproc_internal.h | 15 +++
2 files changed, 97 insertions(+), 63 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index c510125769b9..c438c32f7f0d 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -484,74 +484,23 @@ static int copy_dma_range_map(struct device *to, struct device *from)
return 0;
}

-/**
- * rproc_handle_vdev() - handle a vdev fw resource
- * @rproc: the remote processor
- * @ptr: the vring resource descriptor
- * @offset: offset of the resource entry
- * @avail: size of available data (for sanity checking the image)
- *
- * This resource entry requests the host to statically register a virtio
- * device (vdev), and setup everything needed to support it. It contains
- * everything needed to make it possible: the virtio device id, virtio
- * device features, vrings information, virtio config space, etc...
- *
- * Before registering the vdev, the vrings are allocated from non-cacheable
- * physically contiguous memory. Currently we only support two vrings per
- * remote processor (temporary limitation). We might also want to consider
- * doing the vring allocation only later when ->find_vqs() is invoked, and
- * then release them upon ->del_vqs().
- *
- * Note: @da is currently not really handled correctly: we dynamically
- * allocate it using the DMA API, ignoring requested hard coded addresses,
- * and we don't take care of any required IOMMU programming. This is all
- * going to be taken care of when the generic iommu-based DMA API will be
- * merged. Meanwhile, statically-addressed iommu-based firmware images should
- * use RSC_DEVMEM resource entries to map their required @da to the physical
- * address of their base CMA region (ouch, hacky!).
- *
- * Return: 0 on success, or an appropriate error code otherwise
- */
-static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
- int offset, int avail)
+static struct rproc_vdev *
+rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
{
- struct fw_rsc_vdev *rsc = ptr;
- struct device *dev = &rproc->dev;
struct rproc_vdev *rvdev;
- int i, ret;
+ struct fw_rsc_vdev *rsc = rvdev_data->rsc;
char name[16];
-
- /* make sure resource isn't truncated */
- if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len >
- avail) {
- dev_err(dev, "vdev rsc is truncated\n");
- return -EINVAL;
- }
-
- /* make sure reserved bytes are zeroes */
- if (rsc->reserved[0] || rsc->reserved[1]) {
- dev_err(dev, "vdev rsc has non zero reserved bytes\n");
- return -EINVAL;
- }
-
- dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n",
- rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings);
-
- /* we currently support only two vrings per rvdev */
- if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) {
- dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings);
- return -EINVAL;
- }
+ int i, ret;

rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
if (!rvdev)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);

kref_init(&rvdev->refcount);

- rvdev->id = rsc->id;
+ rvdev->id = rvdev_data->id;
rvdev->rproc = rproc;
- rvdev->index = rproc->nb_vdev++;
+ rvdev->index = rvdev_data->index;

/* Initialise vdev subdevice */
snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
@@ -563,7 +512,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
ret = device_register(&rvdev->dev);
if (ret) {
put_device(&rvdev->dev);
- return ret;
+ return ERR_PTR(ret);
}

ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
@@ -576,7 +525,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
ret = dma_coerce_mask_and_coherent(&rvdev->dev,
dma_get_mask(rproc->dev.parent));
if (ret) {
- dev_warn(dev,
+ dev_warn(&rvdev->dev,
"Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
}
@@ -589,7 +538,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
}

/* remember the resource offset*/
- rvdev->rsc_offset = offset;
+ rvdev->rsc_offset = rvdev_data->rsc_offset;

/* allocate the vring resources */
for (i = 0; i < rsc->num_of_vrings; i++) {
@@ -605,14 +554,14 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,

rproc_add_subdev(rproc, &rvdev->subdev);

- return 0;
+ return rvdev;

unwind_vring_allocations:
for (i--; i >= 0; i--)
rproc_free_vring(&rvdev->vring[i]);
free_rvdev:
device_unregister(&rvdev->dev);
- return ret;
+ return ERR_PTR(ret);
}

void rproc_vdev_release(struct kref *ref)
@@ -632,6 +581,76 @@ void rproc_vdev_release(struct kref *ref)
device_unregister(&rvdev->dev);
}

+/**
+ * rproc_handle_vdev() - handle a vdev fw resource
+ * @rproc: the remote processor
+ * @ptr: the vring resource descriptor
+ * @offset: offset of the resource entry
+ * @avail: size of available data (for sanity checking the image)
+ *
+ * This resource entry requests the host to statically register a virtio
+ * device (vdev), and setup everything needed to support it. It contains
+ * everything needed to make it possible: the virtio device id, virtio
+ * device features, vrings information, virtio config space, etc...
+ *
+ * Before registering the vdev, the vrings are allocated from non-cacheable
+ * physically contiguous memory. Currently we only support two vrings per
+ * remote processor (temporary limitation). We might also want to consider
+ * doing the vring allocation only later when ->find_vqs() is invoked, and
+ * then release them upon ->del_vqs().
+ *
+ * Note: @da is currently not really handled correctly: we dynamically
+ * allocate it using the DMA API, ignoring requested hard coded addresses,
+ * and we don't take care of any required IOMMU programming. This is all
+ * going to be taken care of when the generic iommu-based DMA API will be
+ * merged. Meanwhile, statically-addressed iommu-based firmware images should
+ * use RSC_DEVMEM resource entries to map their required @da to the physical
+ * address of their base CMA region (ouch, hacky!).
+ *
+ * Return: 0 on success, or an appropriate error code otherwise
+ */
+static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
+ int offset, int avail)
+{
+ struct fw_rsc_vdev *rsc = ptr;
+ struct device *dev = &rproc->dev;
+ struct rproc_vdev *rvdev;
+ struct rproc_vdev_data rvdev_data;
+
+ /* make sure resource isn't truncated */
+ if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len >
+ avail) {
+ dev_err(dev, "vdev rsc is truncated\n");
+ return -EINVAL;
+ }
+
+ /* make sure reserved bytes are zeroes */
+ if (rsc->reserved[0] || rsc->reserved[1]) {
+ dev_err(dev, "vdev rsc has non zero reserved bytes\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n",
+ rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings);
+
+ /* we currently support only two vrings per rvdev */
+ if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) {
+ dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings);
+ return -EINVAL;
+ }
+
+ rvdev_data.id = rsc->id;
+ rvdev_data.index = rproc->nb_vdev++;
+ rvdev_data.rsc_offset = offset;
+ rvdev_data.rsc = rsc;
+
+ rvdev = rproc_rvdev_add_device(rproc, &rvdev_data);
+ if (IS_ERR(rvdev))
+ return PTR_ERR(rvdev);
+
+ return 0;
+}
+
/**
* rproc_handle_trace() - handle a shared trace buffer resource
* @rproc: the remote processor
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 72d4d3d7d94d..caa1ef91be14 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -24,6 +24,21 @@ struct rproc_debug_trace {
struct rproc_mem_entry trace_mem;
};

+/**
+ * struct rproc_vdev_data - remoteproc virtio device data
+ * @rsc_offset: offset of the vdev's resource entry
+ * @id: virtio device id (as in virtio_ids.h)
+ * @index: vdev position versus other vdev declared in resource table
+ * @rsc: pointer to the vdev resource entry. Valid onlyduring vdev init as the resource can
+ * be cached by rproc.
+ */
+struct rproc_vdev_data {
+ u32 rsc_offset;
+ unsigned int id;
+ u32 index;
+ struct fw_rsc_vdev *rsc;
+};
+
/* from remoteproc_core.c */
void rproc_release(struct kref *kref);
irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
--
2.24.3

2022-06-06 05:21:19

by Arnaud Pouliquen

[permalink] [raw]
Subject: [PATCH v6 3/4] remoteproc: Move rproc_vdev management to remoteproc_virtio.c

Move functions related to the management of the rproc_vdev
structure in the remoteproc_virtio.c.
The aim is to decorrelate as possible the virtio management from
the core part.

Due to the strong correlation between the vrings and the resource table
the rproc_alloc/parse/free_vring functions are kept in the remoteproc core.

Signed-off-by: Arnaud Pouliquen <[email protected]>

---
Updates vs previous revision (based on Mathieu Poirier's comments):
- clean bad rproc_free_vring call in rproc_vdev_release
---
drivers/remoteproc/remoteproc_core.c | 156 +----------------------
drivers/remoteproc/remoteproc_internal.h | 11 +-
drivers/remoteproc/remoteproc_virtio.c | 153 +++++++++++++++++++++-
3 files changed, 161 insertions(+), 159 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 86147efc0aad..bd6d3f2decc6 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -23,9 +23,7 @@
#include <linux/panic_notifier.h>
#include <linux/slab.h>
#include <linux/mutex.h>
-#include <linux/dma-map-ops.h>
#include <linux/dma-mapping.h>
-#include <linux/dma-direct.h> /* XXX: pokes into bus_dma_range */
#include <linux/firmware.h>
#include <linux/string.h>
#include <linux/debugfs.h>
@@ -383,7 +381,7 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
return 0;
}

-static int
+int
rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i)
{
struct rproc *rproc = rvdev->rproc;
@@ -434,165 +432,17 @@ void rproc_free_vring(struct rproc_vring *rvring)
}
}

-static int rproc_vdev_do_start(struct rproc_subdev *subdev)
-{
- struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
-
- return rproc_add_virtio_dev(rvdev, rvdev->id);
-}
-
-static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
-{
- struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
- int ret;
-
- ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev);
- if (ret)
- dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret);
-}
-
-/**
- * rproc_rvdev_release() - release the existence of a rvdev
- *
- * @dev: the subdevice's dev
- */
-static void rproc_rvdev_release(struct device *dev)
-{
- struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
-
- of_reserved_mem_device_release(dev);
-
- kfree(rvdev);
-}
-
-static int copy_dma_range_map(struct device *to, struct device *from)
-{
- const struct bus_dma_region *map = from->dma_range_map, *new_map, *r;
- int num_ranges = 0;
-
- if (!map)
- return 0;
-
- for (r = map; r->size; r++)
- num_ranges++;
-
- new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)),
- GFP_KERNEL);
- if (!new_map)
- return -ENOMEM;
- to->dma_range_map = new_map;
- return 0;
-}
-
-static void rproc_add_rvdev(struct rproc *rproc, struct rproc_vdev *rvdev)
+void rproc_add_rvdev(struct rproc *rproc, struct rproc_vdev *rvdev)
{
if (rvdev && rproc)
list_add_tail(&rvdev->node, &rproc->rvdevs);
}

-static void rproc_remove_rvdev(struct rproc_vdev *rvdev)
+void rproc_remove_rvdev(struct rproc_vdev *rvdev)
{
if (rvdev)
list_del(&rvdev->node);
}
-
-static struct rproc_vdev *
-rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
-{
- struct rproc_vdev *rvdev;
- struct fw_rsc_vdev *rsc = rvdev_data->rsc;
- char name[16];
- int i, ret;
-
- rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
- if (!rvdev)
- return ERR_PTR(-ENOMEM);
-
- kref_init(&rvdev->refcount);
-
- rvdev->id = rvdev_data->id;
- rvdev->rproc = rproc;
- rvdev->index = rvdev_data->index;
-
- /* Initialise vdev subdevice */
- snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
- rvdev->dev.parent = &rproc->dev;
- rvdev->dev.release = rproc_rvdev_release;
- dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
- dev_set_drvdata(&rvdev->dev, rvdev);
-
- ret = device_register(&rvdev->dev);
- if (ret) {
- put_device(&rvdev->dev);
- return ERR_PTR(ret);
- }
-
- ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
- if (ret)
- goto free_rvdev;
-
- /* Make device dma capable by inheriting from parent's capabilities */
- set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
-
- ret = dma_coerce_mask_and_coherent(&rvdev->dev,
- dma_get_mask(rproc->dev.parent));
- if (ret) {
- dev_warn(&rvdev->dev,
- "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
- dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
- }
-
- /* parse the vrings */
- for (i = 0; i < rsc->num_of_vrings; i++) {
- ret = rproc_parse_vring(rvdev, rsc, i);
- if (ret)
- goto free_rvdev;
- }
-
- /* remember the resource offset*/
- rvdev->rsc_offset = rvdev_data->rsc_offset;
-
- /* allocate the vring resources */
- for (i = 0; i < rsc->num_of_vrings; i++) {
- ret = rproc_alloc_vring(rvdev, i);
- if (ret)
- goto unwind_vring_allocations;
- }
-
- rproc_add_rvdev(rproc, rvdev);
-
- rvdev->subdev.start = rproc_vdev_do_start;
- rvdev->subdev.stop = rproc_vdev_do_stop;
-
- rproc_add_subdev(rproc, &rvdev->subdev);
-
- return rvdev;
-
-unwind_vring_allocations:
- for (i--; i >= 0; i--)
- rproc_free_vring(&rvdev->vring[i]);
-free_rvdev:
- device_unregister(&rvdev->dev);
- return ERR_PTR(ret);
-}
-
-void rproc_vdev_release(struct kref *ref)
-{
- struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount);
- struct rproc_vring *rvring;
- struct rproc *rproc = rvdev->rproc;
- int id;
-
- for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) {
- rvring = &rvdev->vring[id];
- rproc_free_vring(rvring);
- }
-
- rproc_remove_subdev(rproc, &rvdev->subdev);
- rproc_remove_rvdev(rvdev);
- device_unregister(&rvdev->dev);
-}
-
/**
* rproc_handle_vdev() - handle a vdev fw resource
* @rproc: the remote processor
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index caa1ef91be14..2c4358ad63ca 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -41,14 +41,14 @@ struct rproc_vdev_data {

/* from remoteproc_core.c */
void rproc_release(struct kref *kref);
-irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
-void rproc_vdev_release(struct kref *ref);
int rproc_of_parse_firmware(struct device *dev, int index,
const char **fw_name);

/* from remoteproc_virtio.c */
-int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id);
-int rproc_remove_virtio_dev(struct device *dev, void *data);
+struct rproc_vdev *rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data);
+void rproc_rvdev_remove_device(struct rproc_vdev *rvdev);
+irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
+void rproc_vdev_release(struct kref *ref);

/* from remoteproc_debugfs.c */
void rproc_remove_trace_file(struct dentry *tfile);
@@ -98,6 +98,7 @@ static inline void rproc_char_device_remove(struct rproc *rproc)

void rproc_free_vring(struct rproc_vring *rvring);
int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
+int rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i);

phys_addr_t rproc_va_to_pa(void *cpu_addr);
int rproc_trigger_recovery(struct rproc *rproc);
@@ -110,6 +111,8 @@ struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
const struct firmware *fw);
struct rproc_mem_entry *
rproc_find_carveout_by_name(struct rproc *rproc, const char *name, ...);
+void rproc_add_rvdev(struct rproc *rproc, struct rproc_vdev *rvdev);
+void rproc_remove_rvdev(struct rproc_vdev *rvdev);

static inline int rproc_prepare_device(struct rproc *rproc)
{
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index 70ab496d0431..ccc95d4e42cf 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -9,7 +9,9 @@
* Brian Swetland <[email protected]>
*/

+#include <linux/dma-direct.h>
#include <linux/dma-map-ops.h>
+#include <linux/dma-mapping.h>
#include <linux/export.h>
#include <linux/of_reserved_mem.h>
#include <linux/remoteproc.h>
@@ -23,6 +25,25 @@

#include "remoteproc_internal.h"

+static int copy_dma_range_map(struct device *to, struct device *from)
+{
+ const struct bus_dma_region *map = from->dma_range_map, *new_map, *r;
+ int num_ranges = 0;
+
+ if (!map)
+ return 0;
+
+ for (r = map; r->size; r++)
+ num_ranges++;
+
+ new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)),
+ GFP_KERNEL);
+ if (!new_map)
+ return -ENOMEM;
+ to->dma_range_map = new_map;
+ return 0;
+}
+
static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
{
return container_of(vdev->dev.parent, struct rproc_vdev, dev);
@@ -339,7 +360,7 @@ static void rproc_virtio_dev_release(struct device *dev)
*
* Return: 0 on success or an appropriate error value otherwise
*/
-int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
+static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
{
struct rproc *rproc = rvdev->rproc;
struct device *dev = &rvdev->dev;
@@ -447,10 +468,138 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
*
* Return: 0
*/
-int rproc_remove_virtio_dev(struct device *dev, void *data)
+static int rproc_remove_virtio_dev(struct device *dev, void *data)
{
struct virtio_device *vdev = dev_to_virtio(dev);

unregister_virtio_device(vdev);
return 0;
}
+
+static int rproc_vdev_do_start(struct rproc_subdev *subdev)
+{
+ struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
+
+ return rproc_add_virtio_dev(rvdev, rvdev->id);
+}
+
+static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
+{
+ struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
+ int ret;
+
+ ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev);
+ if (ret)
+ dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret);
+}
+
+/**
+ * rproc_rvdev_release() - release the existence of a rvdev
+ *
+ * @dev: the subdevice's dev
+ */
+static void rproc_rvdev_release(struct device *dev)
+{
+ struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
+
+ of_reserved_mem_device_release(dev);
+
+ kfree(rvdev);
+}
+
+struct rproc_vdev *
+rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
+{
+ struct rproc_vdev *rvdev;
+ struct fw_rsc_vdev *rsc = rvdev_data->rsc;
+ char name[16];
+ int i, ret;
+
+ rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
+ if (!rvdev)
+ return ERR_PTR(-ENOMEM);
+
+ kref_init(&rvdev->refcount);
+
+ rvdev->id = rvdev_data->id;
+ rvdev->rproc = rproc;
+ rvdev->index = rvdev_data->index;
+
+ /* Initialise vdev subdevice */
+ snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
+ rvdev->dev.parent = &rproc->dev;
+ rvdev->dev.release = rproc_rvdev_release;
+ dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
+ dev_set_drvdata(&rvdev->dev, rvdev);
+
+ ret = device_register(&rvdev->dev);
+ if (ret) {
+ put_device(&rvdev->dev);
+ return ERR_PTR(ret);
+ }
+
+ ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
+ if (ret)
+ goto free_rvdev;
+
+ /* Make device dma capable by inheriting from parent's capabilities */
+ set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
+
+ ret = dma_coerce_mask_and_coherent(&rvdev->dev,
+ dma_get_mask(rproc->dev.parent));
+ if (ret) {
+ dev_warn(&rvdev->dev,
+ "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
+ dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
+ }
+
+ /* parse the vrings */
+ for (i = 0; i < rsc->num_of_vrings; i++) {
+ ret = rproc_parse_vring(rvdev, rsc, i);
+ if (ret)
+ goto free_rvdev;
+ }
+
+ /* remember the resource offset*/
+ rvdev->rsc_offset = rvdev_data->rsc_offset;
+
+ /* allocate the vring resources */
+ for (i = 0; i < rsc->num_of_vrings; i++) {
+ ret = rproc_alloc_vring(rvdev, i);
+ if (ret)
+ goto unwind_vring_allocations;
+ }
+
+ rproc_add_rvdev(rproc, rvdev);
+
+ rvdev->subdev.start = rproc_vdev_do_start;
+ rvdev->subdev.stop = rproc_vdev_do_stop;
+
+ rproc_add_subdev(rproc, &rvdev->subdev);
+
+ return rvdev;
+
+unwind_vring_allocations:
+ for (i--; i >= 0; i--)
+ rproc_free_vring(&rvdev->vring[i]);
+free_rvdev:
+ device_unregister(&rvdev->dev);
+ return ERR_PTR(ret);
+}
+
+void rproc_vdev_release(struct kref *ref)
+{
+ struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount);
+ struct rproc_vring *rvring;
+ struct rproc *rproc = rvdev->rproc;
+ int id;
+
+ for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) {
+ rvring = &rvdev->vring[id];
+ rproc_free_vring(rvring);
+ }
+
+ rproc_remove_subdev(rproc, &rvdev->subdev);
+ rproc_remove_rvdev(rvdev);
+ device_unregister(&rvdev->dev);
+}
--
2.24.3

2022-06-06 05:49:36

by Arnaud Pouliquen

[permalink] [raw]
Subject: [PATCH v6 2/4] remoteproc: core: Introduce rproc_add_rvdev function

The rproc structure contains a list of registered rproc_vdev structure.
To be able to move the management of the rproc_vdev structure in
remoteproc_virtio.c (i.e rproc_rvdev_add_device and
rproc_rvdev_remove_device functions), introduce the rproc_add_rvdev
and rproc_remove_rvdev functions.

Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
---
Updates vs previous revision (based on Mathieu Poirier's comments):
- Fix function name in commit message and add Mathieu's Reviewed-by.
---
drivers/remoteproc/remoteproc_core.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index c438c32f7f0d..86147efc0aad 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -484,6 +484,18 @@ static int copy_dma_range_map(struct device *to, struct device *from)
return 0;
}

+static void rproc_add_rvdev(struct rproc *rproc, struct rproc_vdev *rvdev)
+{
+ if (rvdev && rproc)
+ list_add_tail(&rvdev->node, &rproc->rvdevs);
+}
+
+static void rproc_remove_rvdev(struct rproc_vdev *rvdev)
+{
+ if (rvdev)
+ list_del(&rvdev->node);
+}
+
static struct rproc_vdev *
rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
{
@@ -547,7 +559,7 @@ rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
goto unwind_vring_allocations;
}

- list_add_tail(&rvdev->node, &rproc->rvdevs);
+ rproc_add_rvdev(rproc, rvdev);

rvdev->subdev.start = rproc_vdev_do_start;
rvdev->subdev.stop = rproc_vdev_do_stop;
@@ -577,7 +589,7 @@ void rproc_vdev_release(struct kref *ref)
}

rproc_remove_subdev(rproc, &rvdev->subdev);
- list_del(&rvdev->node);
+ rproc_remove_rvdev(rvdev);
device_unregister(&rvdev->dev);
}

--
2.24.3

2022-06-06 06:08:18

by Arnaud Pouliquen

[permalink] [raw]
Subject: [PATCH v6 4/4] remoteproc: virtio: Create platform device for the remoteproc_virtio

Define a platform driver to manage the remoteproc virtio device as
a platform devices.

The platform device allows to pass rproc_vdev_data platform data to
specify properties that are stored in the rproc_vdev structure.

Such approach will allow to preserve legacy remoteproc virtio device
creation but also to probe the device using device tree mechanism.

remoteproc_virtio.c update:
- Add rproc_virtio_driver platform driver. The probe/remove ops replace
the rproc_rvdev_add_device/rproc_rvdev_remove_device functions.
- All reference to the rvdev->dev has been updated to rvdev-pdev->dev.
- rproc_rvdev_release is removed as associated to the rvdev device.
- The use of rvdev->kref counter is replaced by get/put_device on the
remoteproc virtio platform device.
- The vdev device no longer increments rproc device counter.
increment/decrement is done in rproc_virtio_probe/rproc_virtio_remove
function in charge of the vrings allocation/free.

remoteproc_core.c update:
Migrate from the rvdev device to the rvdev platform device.
From this patch, when a vdev resource is found in the resource table
the remoteproc core register a platform device.

Signed-off-by: Arnaud Pouliquen <[email protected]>
---
Updates vs previous revision (based on Mathieu Poirier's comments):
- remoteteproc_virtio:
- remove debug print on probe and remove
- remove wriong comment on put_device(&rproc->dev), the get is
already commented
- remoteproc_core:
- fix dev_err() device parameter.
---
drivers/remoteproc/remoteproc_core.c | 12 +-
drivers/remoteproc/remoteproc_internal.h | 3 -
drivers/remoteproc/remoteproc_virtio.c | 141 ++++++++++++-----------
include/linux/remoteproc.h | 6 +-
4 files changed, 81 insertions(+), 81 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index bd6d3f2decc6..81c4deef2895 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -478,6 +478,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
struct device *dev = &rproc->dev;
struct rproc_vdev *rvdev;
struct rproc_vdev_data rvdev_data;
+ struct platform_device *pdev;

/* make sure resource isn't truncated */
if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len >
@@ -506,9 +507,12 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
rvdev_data.rsc_offset = offset;
rvdev_data.rsc = rsc;

- rvdev = rproc_rvdev_add_device(rproc, &rvdev_data);
- if (IS_ERR(rvdev))
- return PTR_ERR(rvdev);
+ pdev = platform_device_register_data(dev, "rproc-virtio", rvdev_data.index, &rvdev_data,
+ sizeof(rvdev_data));
+ if (IS_ERR(pdev)) {
+ dev_err(dev, "failed to create rproc-virtio device\n");
+ return PTR_ERR(pdev);
+ }

return 0;
}
@@ -1248,7 +1252,7 @@ void rproc_resource_cleanup(struct rproc *rproc)

/* clean up remote vdev entries */
list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node)
- kref_put(&rvdev->refcount, rproc_vdev_release);
+ platform_device_unregister(rvdev->pdev);

rproc_coredump_cleanup(rproc);
}
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 2c4358ad63ca..0608052d1120 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -45,10 +45,7 @@ int rproc_of_parse_firmware(struct device *dev, int index,
const char **fw_name);

/* from remoteproc_virtio.c */
-struct rproc_vdev *rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data);
-void rproc_rvdev_remove_device(struct rproc_vdev *rvdev);
irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
-void rproc_vdev_release(struct kref *ref);

/* from remoteproc_debugfs.c */
void rproc_remove_trace_file(struct dentry *tfile);
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index ccc95d4e42cf..06d2131dad11 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -13,6 +13,7 @@
#include <linux/dma-map-ops.h>
#include <linux/dma-mapping.h>
#include <linux/export.h>
+#include <linux/of_platform.h>
#include <linux/of_reserved_mem.h>
#include <linux/remoteproc.h>
#include <linux/virtio.h>
@@ -46,7 +47,11 @@ static int copy_dma_range_map(struct device *to, struct device *from)

static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
{
- return container_of(vdev->dev.parent, struct rproc_vdev, dev);
+ struct platform_device *pdev;
+
+ pdev = container_of(vdev->dev.parent, struct platform_device, dev);
+
+ return platform_get_drvdata(pdev);
}

static struct rproc *vdev_to_rproc(struct virtio_device *vdev)
@@ -341,13 +346,10 @@ static void rproc_virtio_dev_release(struct device *dev)
{
struct virtio_device *vdev = dev_to_virtio(dev);
struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
- struct rproc *rproc = vdev_to_rproc(vdev);

kfree(vdev);

- kref_put(&rvdev->refcount, rproc_vdev_release);
-
- put_device(&rproc->dev);
+ put_device(&rvdev->pdev->dev);
}

/**
@@ -363,7 +365,7 @@ static void rproc_virtio_dev_release(struct device *dev)
static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
{
struct rproc *rproc = rvdev->rproc;
- struct device *dev = &rvdev->dev;
+ struct device *dev = &rvdev->pdev->dev;
struct virtio_device *vdev;
struct rproc_mem_entry *mem;
int ret;
@@ -433,18 +435,8 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
vdev->dev.parent = dev;
vdev->dev.release = rproc_virtio_dev_release;

- /*
- * We're indirectly making a non-temporary copy of the rproc pointer
- * here, because drivers probed with this vdev will indirectly
- * access the wrapping rproc.
- *
- * Therefore we must increment the rproc refcount here, and decrement
- * it _only_ when the vdev is released.
- */
- get_device(&rproc->dev);
-
/* Reference the vdev and vring allocations */
- kref_get(&rvdev->refcount);
+ get_device(dev);

ret = register_virtio_device(vdev);
if (ret) {
@@ -486,78 +478,57 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev)
static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
{
struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
+ struct device *dev = &rvdev->pdev->dev;
int ret;

- ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev);
+ ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev);
if (ret)
- dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret);
+ dev_warn(dev, "can't remove vdev child device: %d\n", ret);
}

-/**
- * rproc_rvdev_release() - release the existence of a rvdev
- *
- * @dev: the subdevice's dev
- */
-static void rproc_rvdev_release(struct device *dev)
-{
- struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
-
- of_reserved_mem_device_release(dev);
-
- kfree(rvdev);
-}
-
-struct rproc_vdev *
-rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
+static int rproc_virtio_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
+ struct rproc_vdev_data *rvdev_data = dev->platform_data;
struct rproc_vdev *rvdev;
- struct fw_rsc_vdev *rsc = rvdev_data->rsc;
- char name[16];
+ struct rproc *rproc = container_of(dev->parent, struct rproc, dev);
+ struct fw_rsc_vdev *rsc;
int i, ret;

- rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
- if (!rvdev)
- return ERR_PTR(-ENOMEM);
+ if (!rvdev_data)
+ return -EINVAL;

- kref_init(&rvdev->refcount);
+ rvdev = devm_kzalloc(dev, sizeof(*rvdev), GFP_KERNEL);
+ if (!rvdev)
+ return -ENOMEM;

rvdev->id = rvdev_data->id;
rvdev->rproc = rproc;
rvdev->index = rvdev_data->index;

- /* Initialise vdev subdevice */
- snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
- rvdev->dev.parent = &rproc->dev;
- rvdev->dev.release = rproc_rvdev_release;
- dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
- dev_set_drvdata(&rvdev->dev, rvdev);
-
- ret = device_register(&rvdev->dev);
- if (ret) {
- put_device(&rvdev->dev);
- return ERR_PTR(ret);
- }
-
- ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
+ ret = copy_dma_range_map(dev, rproc->dev.parent);
if (ret)
- goto free_rvdev;
+ return ret;

/* Make device dma capable by inheriting from parent's capabilities */
- set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
+ set_dma_ops(dev, get_dma_ops(rproc->dev.parent));

- ret = dma_coerce_mask_and_coherent(&rvdev->dev,
- dma_get_mask(rproc->dev.parent));
+ ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent));
if (ret) {
- dev_warn(&rvdev->dev,
- "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
+ dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
}

+ platform_set_drvdata(pdev, rvdev);
+ rvdev->pdev = pdev;
+
+ rsc = rvdev_data->rsc;
+
/* parse the vrings */
for (i = 0; i < rsc->num_of_vrings; i++) {
ret = rproc_parse_vring(rvdev, rsc, i);
if (ret)
- goto free_rvdev;
+ return ret;
}

/* remember the resource offset*/
@@ -577,21 +548,30 @@ rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)

rproc_add_subdev(rproc, &rvdev->subdev);

- return rvdev;
+ /*
+ * We're indirectly making a non-temporary copy of the rproc pointer
+ * here, because the platform device or the vdev device will indirectly
+ * access the wrapping rproc.
+ *
+ * Therefore we must increment the rproc refcount here, and decrement
+ * it _only_ on platform remove.
+ */
+ get_device(&rproc->dev);
+
+ return 0;

unwind_vring_allocations:
for (i--; i >= 0; i--)
rproc_free_vring(&rvdev->vring[i]);
-free_rvdev:
- device_unregister(&rvdev->dev);
- return ERR_PTR(ret);
+
+ return ret;
}

-void rproc_vdev_release(struct kref *ref)
+static int rproc_virtio_remove(struct platform_device *pdev)
{
- struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount);
- struct rproc_vring *rvring;
+ struct rproc_vdev *rvdev = dev_get_drvdata(&pdev->dev);
struct rproc *rproc = rvdev->rproc;
+ struct rproc_vring *rvring;
int id;

for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) {
@@ -601,5 +581,26 @@ void rproc_vdev_release(struct kref *ref)

rproc_remove_subdev(rproc, &rvdev->subdev);
rproc_remove_rvdev(rvdev);
- device_unregister(&rvdev->dev);
+
+ of_reserved_mem_device_release(&pdev->dev);
+
+ put_device(&rproc->dev);
+
+ return 0;
}
+
+/* Platform driver */
+static const struct of_device_id rproc_virtio_match[] = {
+ { .compatible = "virtio,rproc", },
+ {},
+};
+
+static struct platform_driver rproc_virtio_driver = {
+ .probe = rproc_virtio_probe,
+ .remove = rproc_virtio_remove,
+ .driver = {
+ .name = "rproc-virtio",
+ .of_match_table = rproc_virtio_match,
+ },
+};
+builtin_platform_driver(rproc_virtio_driver);
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 7c943f0a2fc4..64b9809d0ec1 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -616,9 +616,8 @@ struct rproc_vring {

/**
* struct rproc_vdev - remoteproc state for a supported virtio device
- * @refcount: reference counter for the vdev and vring allocations
* @subdev: handle for registering the vdev as a rproc subdevice
- * @dev: device struct used for reference count semantics
+ * @pdev: remoteproc virtio platform device
* @id: virtio device id (as in virtio_ids.h)
* @node: list node
* @rproc: the rproc handle
@@ -627,10 +626,9 @@ struct rproc_vring {
* @index: vdev position versus other vdev declared in resource table
*/
struct rproc_vdev {
- struct kref refcount;

struct rproc_subdev subdev;
- struct device dev;
+ struct platform_device *pdev;

unsigned int id;
struct list_head node;
--
2.24.3

2022-07-04 17:57:15

by Mathieu Poirier

[permalink] [raw]
Subject: Re: [PATCH v6 0/4] remoteproc: restructure the remoteproc VirtIO device

I have started reviewing this set.

Thanks,
Mathieu

On Fri, Jun 03, 2022 at 06:31:54PM +0200, Arnaud Pouliquen wrote:
> 1) Update from V5 [1]:
>
> Updates based on Mathieu's comments.
> Updates are listed in the commit message of each patch.
>
> [1] https://lkml.org/lkml/2022/4/6/597
>
> 2) Patchset description:
>
> This series is a part of the work initiated a long time ago in
> the series "remoteproc: Decorelate virtio from core"[2]
>
> Objective of the work:
> - Update the remoteproc VirtIO device creation (use platform device)
> - Allow to declare remoteproc VirtIO device in DT
> - declare resources associated to a remote proc VirtIO
> - declare a list of VirtIO supported by the platform.
> - Prepare the enhancement to more VirtIO devices (e.g I2C, audio, video, ...).
> For instance be able to declare a I2C device in a virtio-i2C node.
> - Keep the legacy working!
> - Try to improve the picture about concerns reported by Christoph Hellwing [3][4]
>
> [2] https://lkml.org/lkml/2020/4/16/1817
> [3] https://lkml.org/lkml/2021/6/23/607
> [4] https://patchwork.kernel.org/project/linux-remoteproc/patch/[email protected]/
>
> In term of device tree this would result in such hierarchy (stm32mp1 example with 2 virtio RPMSG):
>
> m4_rproc: m4@10000000 {
> compatible = "st,stm32mp1-m4";
> reg = <0x10000000 0x40000>,
> <0x30000000 0x40000>,
> <0x38000000 0x10000>;
> memory-region = <&retram>, <&mcuram>,<&mcuram2>;
> mboxes = <&ipcc 2>, <&ipcc 3>;
> mbox-names = "shutdown", "detach";
> status = "okay";
>
> #address-cells = <1>;
> #size-cells = <0>;
>
> vdev@0 {
> compatible = "rproc-virtio";
> reg = <0>;
> virtio,id = <7>; /* RPMSG */
> memory-region = <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>;
> mboxes = <&ipcc 0>, <&ipcc 1>;
> mbox-names = "vq0", "vq1";
> status = "okay";
> };
>
> vdev@1 {
> compatible = "rproc-virtio";
> reg = <1>;
> virtio,id = <7>; /*RPMSG */
> memory-region = <&vdev1vring0>, <&vdev1vring1>, <&vdev1buffer>;
> mboxes = <&ipcc 4>, <&ipcc 5>;
> mbox-names = "vq0", "vq1";
> status = "okay";
> };
> };
>
> I have divided the work in 4 steps to simplify the review, This series implements only
> the step 1:
> step 1: redefine the remoteproc VirtIO device as a platform device
> - migrate rvdev management in remoteproc virtio.c,
> - create a remotproc virtio config ( can be disabled for platform that not use VirtIO IPC.
> step 2: add possibility to declare and probe a VirtIO sub node
> - VirtIO bindings declaration,
> - multi DT VirtIO devices support,
> - introduction of a remote proc virtio bind device mechanism ,
> => https://github.com/arnopo/linux/commits/step2-virtio-in-DT
> step 3: Add memory declaration in VirtIO subnode
> => https://github.com/arnopo/linux/commits/step3-virtio-memories
> step 4: Add mailbox declaration in VirtIO subnode
> => https://github.com/arnopo/linux/commits/step4-virtio-mailboxes
>
> Arnaud Pouliquen (4):
> remoteproc: core: Introduce rproc_rvdev_add_device function
> remoteproc: core: Introduce rproc_add_rvdev function
> remoteproc: Move rproc_vdev management to remoteproc_virtio.c
> remoteproc: virtio: Create platform device for the remoteproc_virtio
>
> drivers/remoteproc/remoteproc_core.c | 153 +++---------------
> drivers/remoteproc/remoteproc_internal.h | 23 ++-
> drivers/remoteproc/remoteproc_virtio.c | 188 ++++++++++++++++++++---
> include/linux/remoteproc.h | 6 +-
> 4 files changed, 209 insertions(+), 161 deletions(-)
>
> --
> 2.24.3
>

2022-07-04 18:01:41

by Mathieu Poirier

[permalink] [raw]
Subject: Re: [PATCH v6 1/4] remoteproc: core: Introduce rproc_rvdev_add_device function

On Fri, Jun 03, 2022 at 06:31:55PM +0200, Arnaud Pouliquen wrote:
> In preparation of the migration of the management of rvdev in
> remoteproc_virtio.c, this patch spins off a new function to manage the
> remoteproc virtio device creation.
>
> The rproc_rvdev_add_device will be moved to remoteproc_virtio.c.
>
> The rproc_vdev_data structure is introduced to provide information for
> the rvdev creation. This structure allows to manage the rvdev and vrings
> allocation in the rproc_rvdev_add_device function.
>
> Signed-off-by: Arnaud Pouliquen <[email protected]>
> ---
> Updates vs previous revision (based on Mathieu Poirier's comments):
> - rproc_vdev_data struct change index field type to u32
> - remove rproc_rvdev_remove_device function creation
> ---
> drivers/remoteproc/remoteproc_core.c | 145 +++++++++++++----------
> drivers/remoteproc/remoteproc_internal.h | 15 +++
> 2 files changed, 97 insertions(+), 63 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index c510125769b9..c438c32f7f0d 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -484,74 +484,23 @@ static int copy_dma_range_map(struct device *to, struct device *from)
> return 0;
> }
>
> -/**
> - * rproc_handle_vdev() - handle a vdev fw resource
> - * @rproc: the remote processor
> - * @ptr: the vring resource descriptor
> - * @offset: offset of the resource entry
> - * @avail: size of available data (for sanity checking the image)
> - *
> - * This resource entry requests the host to statically register a virtio
> - * device (vdev), and setup everything needed to support it. It contains
> - * everything needed to make it possible: the virtio device id, virtio
> - * device features, vrings information, virtio config space, etc...
> - *
> - * Before registering the vdev, the vrings are allocated from non-cacheable
> - * physically contiguous memory. Currently we only support two vrings per
> - * remote processor (temporary limitation). We might also want to consider
> - * doing the vring allocation only later when ->find_vqs() is invoked, and
> - * then release them upon ->del_vqs().
> - *
> - * Note: @da is currently not really handled correctly: we dynamically
> - * allocate it using the DMA API, ignoring requested hard coded addresses,
> - * and we don't take care of any required IOMMU programming. This is all
> - * going to be taken care of when the generic iommu-based DMA API will be
> - * merged. Meanwhile, statically-addressed iommu-based firmware images should
> - * use RSC_DEVMEM resource entries to map their required @da to the physical
> - * address of their base CMA region (ouch, hacky!).
> - *
> - * Return: 0 on success, or an appropriate error code otherwise
> - */
> -static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
> - int offset, int avail)
> +static struct rproc_vdev *
> +rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
> {
> - struct fw_rsc_vdev *rsc = ptr;
> - struct device *dev = &rproc->dev;
> struct rproc_vdev *rvdev;
> - int i, ret;
> + struct fw_rsc_vdev *rsc = rvdev_data->rsc;
> char name[16];
> -
> - /* make sure resource isn't truncated */
> - if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len >
> - avail) {
> - dev_err(dev, "vdev rsc is truncated\n");
> - return -EINVAL;
> - }
> -
> - /* make sure reserved bytes are zeroes */
> - if (rsc->reserved[0] || rsc->reserved[1]) {
> - dev_err(dev, "vdev rsc has non zero reserved bytes\n");
> - return -EINVAL;
> - }
> -
> - dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n",
> - rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings);
> -
> - /* we currently support only two vrings per rvdev */
> - if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) {
> - dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings);
> - return -EINVAL;
> - }
> + int i, ret;
>
> rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
> if (!rvdev)
> - return -ENOMEM;
> + return ERR_PTR(-ENOMEM);
>
> kref_init(&rvdev->refcount);
>
> - rvdev->id = rsc->id;
> + rvdev->id = rvdev_data->id;
> rvdev->rproc = rproc;
> - rvdev->index = rproc->nb_vdev++;
> + rvdev->index = rvdev_data->index;
>
> /* Initialise vdev subdevice */
> snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
> @@ -563,7 +512,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
> ret = device_register(&rvdev->dev);
> if (ret) {
> put_device(&rvdev->dev);
> - return ret;
> + return ERR_PTR(ret);
> }
>
> ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
> @@ -576,7 +525,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
> ret = dma_coerce_mask_and_coherent(&rvdev->dev,
> dma_get_mask(rproc->dev.parent));
> if (ret) {
> - dev_warn(dev,
> + dev_warn(&rvdev->dev,
> "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
> dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
> }
> @@ -589,7 +538,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
> }
>
> /* remember the resource offset*/
> - rvdev->rsc_offset = offset;
> + rvdev->rsc_offset = rvdev_data->rsc_offset;
>
> /* allocate the vring resources */
> for (i = 0; i < rsc->num_of_vrings; i++) {
> @@ -605,14 +554,14 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
>
> rproc_add_subdev(rproc, &rvdev->subdev);
>
> - return 0;
> + return rvdev;
>
> unwind_vring_allocations:
> for (i--; i >= 0; i--)
> rproc_free_vring(&rvdev->vring[i]);
> free_rvdev:
> device_unregister(&rvdev->dev);
> - return ret;
> + return ERR_PTR(ret);
> }
>
> void rproc_vdev_release(struct kref *ref)
> @@ -632,6 +581,76 @@ void rproc_vdev_release(struct kref *ref)
> device_unregister(&rvdev->dev);
> }
>
> +/**
> + * rproc_handle_vdev() - handle a vdev fw resource
> + * @rproc: the remote processor
> + * @ptr: the vring resource descriptor
> + * @offset: offset of the resource entry
> + * @avail: size of available data (for sanity checking the image)
> + *
> + * This resource entry requests the host to statically register a virtio
> + * device (vdev), and setup everything needed to support it. It contains
> + * everything needed to make it possible: the virtio device id, virtio
> + * device features, vrings information, virtio config space, etc...
> + *
> + * Before registering the vdev, the vrings are allocated from non-cacheable
> + * physically contiguous memory. Currently we only support two vrings per
> + * remote processor (temporary limitation). We might also want to consider
> + * doing the vring allocation only later when ->find_vqs() is invoked, and
> + * then release them upon ->del_vqs().
> + *
> + * Note: @da is currently not really handled correctly: we dynamically
> + * allocate it using the DMA API, ignoring requested hard coded addresses,
> + * and we don't take care of any required IOMMU programming. This is all
> + * going to be taken care of when the generic iommu-based DMA API will be
> + * merged. Meanwhile, statically-addressed iommu-based firmware images should
> + * use RSC_DEVMEM resource entries to map their required @da to the physical
> + * address of their base CMA region (ouch, hacky!).
> + *
> + * Return: 0 on success, or an appropriate error code otherwise
> + */
> +static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
> + int offset, int avail)
> +{
> + struct fw_rsc_vdev *rsc = ptr;
> + struct device *dev = &rproc->dev;
> + struct rproc_vdev *rvdev;
> + struct rproc_vdev_data rvdev_data;
> +
> + /* make sure resource isn't truncated */
> + if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len >
> + avail) {
> + dev_err(dev, "vdev rsc is truncated\n");
> + return -EINVAL;
> + }
> +
> + /* make sure reserved bytes are zeroes */
> + if (rsc->reserved[0] || rsc->reserved[1]) {
> + dev_err(dev, "vdev rsc has non zero reserved bytes\n");
> + return -EINVAL;
> + }
> +
> + dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n",
> + rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings);
> +
> + /* we currently support only two vrings per rvdev */
> + if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) {
> + dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings);
> + return -EINVAL;
> + }
> +
> + rvdev_data.id = rsc->id;
> + rvdev_data.index = rproc->nb_vdev++;
> + rvdev_data.rsc_offset = offset;
> + rvdev_data.rsc = rsc;
> +
> + rvdev = rproc_rvdev_add_device(rproc, &rvdev_data);
> + if (IS_ERR(rvdev))
> + return PTR_ERR(rvdev);
> +
> + return 0;
> +}
> +
> /**
> * rproc_handle_trace() - handle a shared trace buffer resource
> * @rproc: the remote processor
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index 72d4d3d7d94d..caa1ef91be14 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -24,6 +24,21 @@ struct rproc_debug_trace {
> struct rproc_mem_entry trace_mem;
> };
>
> +/**
> + * struct rproc_vdev_data - remoteproc virtio device data
> + * @rsc_offset: offset of the vdev's resource entry
> + * @id: virtio device id (as in virtio_ids.h)
> + * @index: vdev position versus other vdev declared in resource table
> + * @rsc: pointer to the vdev resource entry. Valid onlyduring vdev init as the resource can

s/onlyduring/only during

More comments coming tomorrow.

> + * be cached by rproc.
> + */
> +struct rproc_vdev_data {
> + u32 rsc_offset;
> + unsigned int id;
> + u32 index;
> + struct fw_rsc_vdev *rsc;
> +};
> +
> /* from remoteproc_core.c */
> void rproc_release(struct kref *kref);
> irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
> --
> 2.24.3
>

2022-07-05 16:11:49

by Mathieu Poirier

[permalink] [raw]
Subject: Re: [PATCH v6 2/4] remoteproc: core: Introduce rproc_add_rvdev function

On Fri, Jun 03, 2022 at 06:31:56PM +0200, Arnaud Pouliquen wrote:
> The rproc structure contains a list of registered rproc_vdev structure.
> To be able to move the management of the rproc_vdev structure in
> remoteproc_virtio.c (i.e rproc_rvdev_add_device and
> rproc_rvdev_remove_device functions), introduce the rproc_add_rvdev

Function rproc_rvdev_remove_device() no longer exists and shouldn't be part of
this changelog.

> and rproc_remove_rvdev functions.
>
> Signed-off-by: Arnaud Pouliquen <[email protected]>
> Reviewed-by: Mathieu Poirier <[email protected]>
> ---
> Updates vs previous revision (based on Mathieu Poirier's comments):
> - Fix function name in commit message and add Mathieu's Reviewed-by.
> ---
> drivers/remoteproc/remoteproc_core.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index c438c32f7f0d..86147efc0aad 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -484,6 +484,18 @@ static int copy_dma_range_map(struct device *to, struct device *from)
> return 0;
> }
>
> +static void rproc_add_rvdev(struct rproc *rproc, struct rproc_vdev *rvdev)
> +{
> + if (rvdev && rproc)
> + list_add_tail(&rvdev->node, &rproc->rvdevs);
> +}
> +
> +static void rproc_remove_rvdev(struct rproc_vdev *rvdev)
> +{
> + if (rvdev)
> + list_del(&rvdev->node);
> +}
> +
> static struct rproc_vdev *
> rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
> {
> @@ -547,7 +559,7 @@ rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
> goto unwind_vring_allocations;
> }
>
> - list_add_tail(&rvdev->node, &rproc->rvdevs);
> + rproc_add_rvdev(rproc, rvdev);
>
> rvdev->subdev.start = rproc_vdev_do_start;
> rvdev->subdev.stop = rproc_vdev_do_stop;
> @@ -577,7 +589,7 @@ void rproc_vdev_release(struct kref *ref)
> }
>
> rproc_remove_subdev(rproc, &rvdev->subdev);
> - list_del(&rvdev->node);
> + rproc_remove_rvdev(rvdev);
> device_unregister(&rvdev->dev);
> }
>
> --
> 2.24.3
>

2022-07-05 17:04:11

by Mathieu Poirier

[permalink] [raw]
Subject: Re: [PATCH v6 4/4] remoteproc: virtio: Create platform device for the remoteproc_virtio

On Fri, Jun 03, 2022 at 06:31:58PM +0200, Arnaud Pouliquen wrote:
> Define a platform driver to manage the remoteproc virtio device as
> a platform devices.
>
> The platform device allows to pass rproc_vdev_data platform data to
> specify properties that are stored in the rproc_vdev structure.
>
> Such approach will allow to preserve legacy remoteproc virtio device
> creation but also to probe the device using device tree mechanism.
>
> remoteproc_virtio.c update:
> - Add rproc_virtio_driver platform driver. The probe/remove ops replace
> the rproc_rvdev_add_device/rproc_rvdev_remove_device functions.

Function rproc_rvdev_remove_device() no longer exists.

> - All reference to the rvdev->dev has been updated to rvdev-pdev->dev.
> - rproc_rvdev_release is removed as associated to the rvdev device.
> - The use of rvdev->kref counter is replaced by get/put_device on the
> remoteproc virtio platform device.
> - The vdev device no longer increments rproc device counter.
> increment/decrement is done in rproc_virtio_probe/rproc_virtio_remove
> function in charge of the vrings allocation/free.
>
> remoteproc_core.c update:
> Migrate from the rvdev device to the rvdev platform device.
> From this patch, when a vdev resource is found in the resource table
> the remoteproc core register a platform device.
>
> Signed-off-by: Arnaud Pouliquen <[email protected]>
> ---
> Updates vs previous revision (based on Mathieu Poirier's comments):
> - remoteteproc_virtio:
> - remove debug print on probe and remove
> - remove wriong comment on put_device(&rproc->dev), the get is
> already commented
> - remoteproc_core:
> - fix dev_err() device parameter.
> ---
> drivers/remoteproc/remoteproc_core.c | 12 +-
> drivers/remoteproc/remoteproc_internal.h | 3 -
> drivers/remoteproc/remoteproc_virtio.c | 141 ++++++++++++-----------
> include/linux/remoteproc.h | 6 +-
> 4 files changed, 81 insertions(+), 81 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index bd6d3f2decc6..81c4deef2895 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -478,6 +478,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
> struct device *dev = &rproc->dev;
> struct rproc_vdev *rvdev;
> struct rproc_vdev_data rvdev_data;
> + struct platform_device *pdev;
>
> /* make sure resource isn't truncated */
> if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len >
> @@ -506,9 +507,12 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
> rvdev_data.rsc_offset = offset;
> rvdev_data.rsc = rsc;
>
> - rvdev = rproc_rvdev_add_device(rproc, &rvdev_data);
> - if (IS_ERR(rvdev))
> - return PTR_ERR(rvdev);
> + pdev = platform_device_register_data(dev, "rproc-virtio", rvdev_data.index, &rvdev_data,
> + sizeof(rvdev_data));
> + if (IS_ERR(pdev)) {
> + dev_err(dev, "failed to create rproc-virtio device\n");
> + return PTR_ERR(pdev);
> + }
>
> return 0;
> }
> @@ -1248,7 +1252,7 @@ void rproc_resource_cleanup(struct rproc *rproc)
>
> /* clean up remote vdev entries */
> list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node)
> - kref_put(&rvdev->refcount, rproc_vdev_release);
> + platform_device_unregister(rvdev->pdev);
>
> rproc_coredump_cleanup(rproc);
> }
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index 2c4358ad63ca..0608052d1120 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -45,10 +45,7 @@ int rproc_of_parse_firmware(struct device *dev, int index,
> const char **fw_name);
>
> /* from remoteproc_virtio.c */
> -struct rproc_vdev *rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data);
> -void rproc_rvdev_remove_device(struct rproc_vdev *rvdev);

Stale.

I am done reviewing this set.

Thanks,
Mathieu

> irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
> -void rproc_vdev_release(struct kref *ref);
>
> /* from remoteproc_debugfs.c */
> void rproc_remove_trace_file(struct dentry *tfile);
> diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
> index ccc95d4e42cf..06d2131dad11 100644
> --- a/drivers/remoteproc/remoteproc_virtio.c
> +++ b/drivers/remoteproc/remoteproc_virtio.c
> @@ -13,6 +13,7 @@
> #include <linux/dma-map-ops.h>
> #include <linux/dma-mapping.h>
> #include <linux/export.h>
> +#include <linux/of_platform.h>
> #include <linux/of_reserved_mem.h>
> #include <linux/remoteproc.h>
> #include <linux/virtio.h>
> @@ -46,7 +47,11 @@ static int copy_dma_range_map(struct device *to, struct device *from)
>
> static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
> {
> - return container_of(vdev->dev.parent, struct rproc_vdev, dev);
> + struct platform_device *pdev;
> +
> + pdev = container_of(vdev->dev.parent, struct platform_device, dev);
> +
> + return platform_get_drvdata(pdev);
> }
>
> static struct rproc *vdev_to_rproc(struct virtio_device *vdev)
> @@ -341,13 +346,10 @@ static void rproc_virtio_dev_release(struct device *dev)
> {
> struct virtio_device *vdev = dev_to_virtio(dev);
> struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
> - struct rproc *rproc = vdev_to_rproc(vdev);
>
> kfree(vdev);
>
> - kref_put(&rvdev->refcount, rproc_vdev_release);
> -
> - put_device(&rproc->dev);
> + put_device(&rvdev->pdev->dev);
> }
>
> /**
> @@ -363,7 +365,7 @@ static void rproc_virtio_dev_release(struct device *dev)
> static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
> {
> struct rproc *rproc = rvdev->rproc;
> - struct device *dev = &rvdev->dev;
> + struct device *dev = &rvdev->pdev->dev;
> struct virtio_device *vdev;
> struct rproc_mem_entry *mem;
> int ret;
> @@ -433,18 +435,8 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
> vdev->dev.parent = dev;
> vdev->dev.release = rproc_virtio_dev_release;
>
> - /*
> - * We're indirectly making a non-temporary copy of the rproc pointer
> - * here, because drivers probed with this vdev will indirectly
> - * access the wrapping rproc.
> - *
> - * Therefore we must increment the rproc refcount here, and decrement
> - * it _only_ when the vdev is released.
> - */
> - get_device(&rproc->dev);
> -
> /* Reference the vdev and vring allocations */
> - kref_get(&rvdev->refcount);
> + get_device(dev);
>
> ret = register_virtio_device(vdev);
> if (ret) {
> @@ -486,78 +478,57 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev)
> static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
> {
> struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
> + struct device *dev = &rvdev->pdev->dev;
> int ret;
>
> - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev);
> + ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev);
> if (ret)
> - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret);
> + dev_warn(dev, "can't remove vdev child device: %d\n", ret);
> }
>
> -/**
> - * rproc_rvdev_release() - release the existence of a rvdev
> - *
> - * @dev: the subdevice's dev
> - */
> -static void rproc_rvdev_release(struct device *dev)
> -{
> - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
> -
> - of_reserved_mem_device_release(dev);
> -
> - kfree(rvdev);
> -}
> -
> -struct rproc_vdev *
> -rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
> +static int rproc_virtio_probe(struct platform_device *pdev)
> {
> + struct device *dev = &pdev->dev;
> + struct rproc_vdev_data *rvdev_data = dev->platform_data;
> struct rproc_vdev *rvdev;
> - struct fw_rsc_vdev *rsc = rvdev_data->rsc;
> - char name[16];
> + struct rproc *rproc = container_of(dev->parent, struct rproc, dev);
> + struct fw_rsc_vdev *rsc;
> int i, ret;
>
> - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
> - if (!rvdev)
> - return ERR_PTR(-ENOMEM);
> + if (!rvdev_data)
> + return -EINVAL;
>
> - kref_init(&rvdev->refcount);
> + rvdev = devm_kzalloc(dev, sizeof(*rvdev), GFP_KERNEL);
> + if (!rvdev)
> + return -ENOMEM;
>
> rvdev->id = rvdev_data->id;
> rvdev->rproc = rproc;
> rvdev->index = rvdev_data->index;
>
> - /* Initialise vdev subdevice */
> - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
> - rvdev->dev.parent = &rproc->dev;
> - rvdev->dev.release = rproc_rvdev_release;
> - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
> - dev_set_drvdata(&rvdev->dev, rvdev);
> -
> - ret = device_register(&rvdev->dev);
> - if (ret) {
> - put_device(&rvdev->dev);
> - return ERR_PTR(ret);
> - }
> -
> - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
> + ret = copy_dma_range_map(dev, rproc->dev.parent);
> if (ret)
> - goto free_rvdev;
> + return ret;
>
> /* Make device dma capable by inheriting from parent's capabilities */
> - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
> + set_dma_ops(dev, get_dma_ops(rproc->dev.parent));
>
> - ret = dma_coerce_mask_and_coherent(&rvdev->dev,
> - dma_get_mask(rproc->dev.parent));
> + ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent));
> if (ret) {
> - dev_warn(&rvdev->dev,
> - "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
> + dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
> dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
> }
>
> + platform_set_drvdata(pdev, rvdev);
> + rvdev->pdev = pdev;
> +
> + rsc = rvdev_data->rsc;
> +
> /* parse the vrings */
> for (i = 0; i < rsc->num_of_vrings; i++) {
> ret = rproc_parse_vring(rvdev, rsc, i);
> if (ret)
> - goto free_rvdev;
> + return ret;
> }
>
> /* remember the resource offset*/
> @@ -577,21 +548,30 @@ rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
>
> rproc_add_subdev(rproc, &rvdev->subdev);
>
> - return rvdev;
> + /*
> + * We're indirectly making a non-temporary copy of the rproc pointer
> + * here, because the platform device or the vdev device will indirectly
> + * access the wrapping rproc.
> + *
> + * Therefore we must increment the rproc refcount here, and decrement
> + * it _only_ on platform remove.
> + */
> + get_device(&rproc->dev);
> +
> + return 0;
>
> unwind_vring_allocations:
> for (i--; i >= 0; i--)
> rproc_free_vring(&rvdev->vring[i]);
> -free_rvdev:
> - device_unregister(&rvdev->dev);
> - return ERR_PTR(ret);
> +
> + return ret;
> }
>
> -void rproc_vdev_release(struct kref *ref)
> +static int rproc_virtio_remove(struct platform_device *pdev)
> {
> - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount);
> - struct rproc_vring *rvring;
> + struct rproc_vdev *rvdev = dev_get_drvdata(&pdev->dev);
> struct rproc *rproc = rvdev->rproc;
> + struct rproc_vring *rvring;
> int id;
>
> for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) {
> @@ -601,5 +581,26 @@ void rproc_vdev_release(struct kref *ref)
>
> rproc_remove_subdev(rproc, &rvdev->subdev);
> rproc_remove_rvdev(rvdev);
> - device_unregister(&rvdev->dev);
> +
> + of_reserved_mem_device_release(&pdev->dev);
> +
> + put_device(&rproc->dev);
> +
> + return 0;
> }
> +
> +/* Platform driver */
> +static const struct of_device_id rproc_virtio_match[] = {
> + { .compatible = "virtio,rproc", },
> + {},
> +};
> +
> +static struct platform_driver rproc_virtio_driver = {
> + .probe = rproc_virtio_probe,
> + .remove = rproc_virtio_remove,
> + .driver = {
> + .name = "rproc-virtio",
> + .of_match_table = rproc_virtio_match,
> + },
> +};
> +builtin_platform_driver(rproc_virtio_driver);
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 7c943f0a2fc4..64b9809d0ec1 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -616,9 +616,8 @@ struct rproc_vring {
>
> /**
> * struct rproc_vdev - remoteproc state for a supported virtio device
> - * @refcount: reference counter for the vdev and vring allocations
> * @subdev: handle for registering the vdev as a rproc subdevice
> - * @dev: device struct used for reference count semantics
> + * @pdev: remoteproc virtio platform device
> * @id: virtio device id (as in virtio_ids.h)
> * @node: list node
> * @rproc: the rproc handle
> @@ -627,10 +626,9 @@ struct rproc_vring {
> * @index: vdev position versus other vdev declared in resource table
> */
> struct rproc_vdev {
> - struct kref refcount;
>
> struct rproc_subdev subdev;
> - struct device dev;
> + struct platform_device *pdev;
>
> unsigned int id;
> struct list_head node;
> --
> 2.24.3
>

2022-07-05 17:24:50

by Mathieu Poirier

[permalink] [raw]
Subject: Re: [PATCH v6 3/4] remoteproc: Move rproc_vdev management to remoteproc_virtio.c

On Fri, Jun 03, 2022 at 06:31:57PM +0200, Arnaud Pouliquen wrote:
> Move functions related to the management of the rproc_vdev
> structure in the remoteproc_virtio.c.
> The aim is to decorrelate as possible the virtio management from
> the core part.
>
> Due to the strong correlation between the vrings and the resource table
> the rproc_alloc/parse/free_vring functions are kept in the remoteproc core.
>
> Signed-off-by: Arnaud Pouliquen <[email protected]>
>
> ---
> Updates vs previous revision (based on Mathieu Poirier's comments):
> - clean bad rproc_free_vring call in rproc_vdev_release

This was done for V5.

> ---
> drivers/remoteproc/remoteproc_core.c | 156 +----------------------
> drivers/remoteproc/remoteproc_internal.h | 11 +-
> drivers/remoteproc/remoteproc_virtio.c | 153 +++++++++++++++++++++-
> 3 files changed, 161 insertions(+), 159 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 86147efc0aad..bd6d3f2decc6 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -23,9 +23,7 @@
> #include <linux/panic_notifier.h>
> #include <linux/slab.h>
> #include <linux/mutex.h>
> -#include <linux/dma-map-ops.h>
> #include <linux/dma-mapping.h>
> -#include <linux/dma-direct.h> /* XXX: pokes into bus_dma_range */
> #include <linux/firmware.h>
> #include <linux/string.h>
> #include <linux/debugfs.h>
> @@ -383,7 +381,7 @@ int rproc_alloc_vring(struct rproc_vdev *rvdev, int i)
> return 0;
> }
>
> -static int
> +int
> rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i)
> {
> struct rproc *rproc = rvdev->rproc;
> @@ -434,165 +432,17 @@ void rproc_free_vring(struct rproc_vring *rvring)
> }
> }
>
> -static int rproc_vdev_do_start(struct rproc_subdev *subdev)
> -{
> - struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
> -
> - return rproc_add_virtio_dev(rvdev, rvdev->id);
> -}
> -
> -static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
> -{
> - struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
> - int ret;
> -
> - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev);
> - if (ret)
> - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret);
> -}
> -
> -/**
> - * rproc_rvdev_release() - release the existence of a rvdev
> - *
> - * @dev: the subdevice's dev
> - */
> -static void rproc_rvdev_release(struct device *dev)
> -{
> - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
> -
> - of_reserved_mem_device_release(dev);
> -
> - kfree(rvdev);
> -}
> -
> -static int copy_dma_range_map(struct device *to, struct device *from)
> -{
> - const struct bus_dma_region *map = from->dma_range_map, *new_map, *r;
> - int num_ranges = 0;
> -
> - if (!map)
> - return 0;
> -
> - for (r = map; r->size; r++)
> - num_ranges++;
> -
> - new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)),
> - GFP_KERNEL);
> - if (!new_map)
> - return -ENOMEM;
> - to->dma_range_map = new_map;
> - return 0;
> -}
> -
> -static void rproc_add_rvdev(struct rproc *rproc, struct rproc_vdev *rvdev)
> +void rproc_add_rvdev(struct rproc *rproc, struct rproc_vdev *rvdev)
> {
> if (rvdev && rproc)
> list_add_tail(&rvdev->node, &rproc->rvdevs);
> }
>
> -static void rproc_remove_rvdev(struct rproc_vdev *rvdev)
> +void rproc_remove_rvdev(struct rproc_vdev *rvdev)
> {
> if (rvdev)
> list_del(&rvdev->node);
> }
> -
> -static struct rproc_vdev *
> -rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
> -{
> - struct rproc_vdev *rvdev;
> - struct fw_rsc_vdev *rsc = rvdev_data->rsc;
> - char name[16];
> - int i, ret;
> -
> - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
> - if (!rvdev)
> - return ERR_PTR(-ENOMEM);
> -
> - kref_init(&rvdev->refcount);
> -
> - rvdev->id = rvdev_data->id;
> - rvdev->rproc = rproc;
> - rvdev->index = rvdev_data->index;
> -
> - /* Initialise vdev subdevice */
> - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
> - rvdev->dev.parent = &rproc->dev;
> - rvdev->dev.release = rproc_rvdev_release;
> - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
> - dev_set_drvdata(&rvdev->dev, rvdev);
> -
> - ret = device_register(&rvdev->dev);
> - if (ret) {
> - put_device(&rvdev->dev);
> - return ERR_PTR(ret);
> - }
> -
> - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
> - if (ret)
> - goto free_rvdev;
> -
> - /* Make device dma capable by inheriting from parent's capabilities */
> - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
> -
> - ret = dma_coerce_mask_and_coherent(&rvdev->dev,
> - dma_get_mask(rproc->dev.parent));
> - if (ret) {
> - dev_warn(&rvdev->dev,
> - "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
> - dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
> - }
> -
> - /* parse the vrings */
> - for (i = 0; i < rsc->num_of_vrings; i++) {
> - ret = rproc_parse_vring(rvdev, rsc, i);
> - if (ret)
> - goto free_rvdev;
> - }
> -
> - /* remember the resource offset*/
> - rvdev->rsc_offset = rvdev_data->rsc_offset;
> -
> - /* allocate the vring resources */
> - for (i = 0; i < rsc->num_of_vrings; i++) {
> - ret = rproc_alloc_vring(rvdev, i);
> - if (ret)
> - goto unwind_vring_allocations;
> - }
> -
> - rproc_add_rvdev(rproc, rvdev);
> -
> - rvdev->subdev.start = rproc_vdev_do_start;
> - rvdev->subdev.stop = rproc_vdev_do_stop;
> -
> - rproc_add_subdev(rproc, &rvdev->subdev);
> -
> - return rvdev;
> -
> -unwind_vring_allocations:
> - for (i--; i >= 0; i--)
> - rproc_free_vring(&rvdev->vring[i]);
> -free_rvdev:
> - device_unregister(&rvdev->dev);
> - return ERR_PTR(ret);
> -}
> -
> -void rproc_vdev_release(struct kref *ref)
> -{
> - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount);
> - struct rproc_vring *rvring;
> - struct rproc *rproc = rvdev->rproc;
> - int id;
> -
> - for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) {
> - rvring = &rvdev->vring[id];
> - rproc_free_vring(rvring);
> - }
> -
> - rproc_remove_subdev(rproc, &rvdev->subdev);
> - rproc_remove_rvdev(rvdev);
> - device_unregister(&rvdev->dev);
> -}
> -
> /**
> * rproc_handle_vdev() - handle a vdev fw resource
> * @rproc: the remote processor
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index caa1ef91be14..2c4358ad63ca 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -41,14 +41,14 @@ struct rproc_vdev_data {
>
> /* from remoteproc_core.c */
> void rproc_release(struct kref *kref);
> -irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
> -void rproc_vdev_release(struct kref *ref);
> int rproc_of_parse_firmware(struct device *dev, int index,
> const char **fw_name);
>
> /* from remoteproc_virtio.c */
> -int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id);
> -int rproc_remove_virtio_dev(struct device *dev, void *data);
> +struct rproc_vdev *rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data);
> +void rproc_rvdev_remove_device(struct rproc_vdev *rvdev);

Stale

> +irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
> +void rproc_vdev_release(struct kref *ref);
>
> /* from remoteproc_debugfs.c */
> void rproc_remove_trace_file(struct dentry *tfile);
> @@ -98,6 +98,7 @@ static inline void rproc_char_device_remove(struct rproc *rproc)
>
> void rproc_free_vring(struct rproc_vring *rvring);
> int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
> +int rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i);
>
> phys_addr_t rproc_va_to_pa(void *cpu_addr);
> int rproc_trigger_recovery(struct rproc *rproc);
> @@ -110,6 +111,8 @@ struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
> const struct firmware *fw);
> struct rproc_mem_entry *
> rproc_find_carveout_by_name(struct rproc *rproc, const char *name, ...);
> +void rproc_add_rvdev(struct rproc *rproc, struct rproc_vdev *rvdev);
> +void rproc_remove_rvdev(struct rproc_vdev *rvdev);
>
> static inline int rproc_prepare_device(struct rproc *rproc)
> {
> diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
> index 70ab496d0431..ccc95d4e42cf 100644
> --- a/drivers/remoteproc/remoteproc_virtio.c
> +++ b/drivers/remoteproc/remoteproc_virtio.c
> @@ -9,7 +9,9 @@
> * Brian Swetland <[email protected]>
> */
>
> +#include <linux/dma-direct.h>
> #include <linux/dma-map-ops.h>
> +#include <linux/dma-mapping.h>
> #include <linux/export.h>
> #include <linux/of_reserved_mem.h>
> #include <linux/remoteproc.h>
> @@ -23,6 +25,25 @@
>
> #include "remoteproc_internal.h"
>
> +static int copy_dma_range_map(struct device *to, struct device *from)
> +{
> + const struct bus_dma_region *map = from->dma_range_map, *new_map, *r;
> + int num_ranges = 0;
> +
> + if (!map)
> + return 0;
> +
> + for (r = map; r->size; r++)
> + num_ranges++;
> +
> + new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)),
> + GFP_KERNEL);
> + if (!new_map)
> + return -ENOMEM;
> + to->dma_range_map = new_map;
> + return 0;
> +}
> +
> static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
> {
> return container_of(vdev->dev.parent, struct rproc_vdev, dev);
> @@ -339,7 +360,7 @@ static void rproc_virtio_dev_release(struct device *dev)
> *
> * Return: 0 on success or an appropriate error value otherwise
> */
> -int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
> +static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
> {
> struct rproc *rproc = rvdev->rproc;
> struct device *dev = &rvdev->dev;
> @@ -447,10 +468,138 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
> *
> * Return: 0
> */
> -int rproc_remove_virtio_dev(struct device *dev, void *data)
> +static int rproc_remove_virtio_dev(struct device *dev, void *data)
> {
> struct virtio_device *vdev = dev_to_virtio(dev);
>
> unregister_virtio_device(vdev);
> return 0;
> }
> +
> +static int rproc_vdev_do_start(struct rproc_subdev *subdev)
> +{
> + struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
> +
> + return rproc_add_virtio_dev(rvdev, rvdev->id);
> +}
> +
> +static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
> +{
> + struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
> + int ret;
> +
> + ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev);
> + if (ret)
> + dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret);
> +}
> +
> +/**
> + * rproc_rvdev_release() - release the existence of a rvdev
> + *
> + * @dev: the subdevice's dev
> + */
> +static void rproc_rvdev_release(struct device *dev)
> +{
> + struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
> +
> + of_reserved_mem_device_release(dev);
> +
> + kfree(rvdev);
> +}
> +
> +struct rproc_vdev *
> +rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
> +{
> + struct rproc_vdev *rvdev;
> + struct fw_rsc_vdev *rsc = rvdev_data->rsc;
> + char name[16];
> + int i, ret;
> +
> + rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
> + if (!rvdev)
> + return ERR_PTR(-ENOMEM);
> +
> + kref_init(&rvdev->refcount);
> +
> + rvdev->id = rvdev_data->id;
> + rvdev->rproc = rproc;
> + rvdev->index = rvdev_data->index;
> +
> + /* Initialise vdev subdevice */
> + snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
> + rvdev->dev.parent = &rproc->dev;
> + rvdev->dev.release = rproc_rvdev_release;
> + dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
> + dev_set_drvdata(&rvdev->dev, rvdev);
> +
> + ret = device_register(&rvdev->dev);
> + if (ret) {
> + put_device(&rvdev->dev);
> + return ERR_PTR(ret);
> + }
> +
> + ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
> + if (ret)
> + goto free_rvdev;
> +
> + /* Make device dma capable by inheriting from parent's capabilities */
> + set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
> +
> + ret = dma_coerce_mask_and_coherent(&rvdev->dev,
> + dma_get_mask(rproc->dev.parent));
> + if (ret) {
> + dev_warn(&rvdev->dev,
> + "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
> + dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
> + }
> +
> + /* parse the vrings */
> + for (i = 0; i < rsc->num_of_vrings; i++) {
> + ret = rproc_parse_vring(rvdev, rsc, i);
> + if (ret)
> + goto free_rvdev;
> + }
> +
> + /* remember the resource offset*/
> + rvdev->rsc_offset = rvdev_data->rsc_offset;
> +
> + /* allocate the vring resources */
> + for (i = 0; i < rsc->num_of_vrings; i++) {
> + ret = rproc_alloc_vring(rvdev, i);
> + if (ret)
> + goto unwind_vring_allocations;
> + }
> +
> + rproc_add_rvdev(rproc, rvdev);
> +
> + rvdev->subdev.start = rproc_vdev_do_start;
> + rvdev->subdev.stop = rproc_vdev_do_stop;
> +
> + rproc_add_subdev(rproc, &rvdev->subdev);
> +
> + return rvdev;
> +
> +unwind_vring_allocations:
> + for (i--; i >= 0; i--)
> + rproc_free_vring(&rvdev->vring[i]);
> +free_rvdev:
> + device_unregister(&rvdev->dev);
> + return ERR_PTR(ret);
> +}
> +
> +void rproc_vdev_release(struct kref *ref)
> +{
> + struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount);
> + struct rproc_vring *rvring;
> + struct rproc *rproc = rvdev->rproc;
> + int id;
> +
> + for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) {
> + rvring = &rvdev->vring[id];
> + rproc_free_vring(rvring);
> + }
> +
> + rproc_remove_subdev(rproc, &rvdev->subdev);
> + rproc_remove_rvdev(rvdev);
> + device_unregister(&rvdev->dev);
> +}
> --
> 2.24.3
>

2022-07-07 13:18:17

by Arnaud Pouliquen

[permalink] [raw]
Subject: Re: [PATCH v6 4/4] remoteproc: virtio: Create platform device for the remoteproc_virtio

Hello Mathieu,

On 7/5/22 18:28, Mathieu Poirier wrote:
> On Fri, Jun 03, 2022 at 06:31:58PM +0200, Arnaud Pouliquen wrote:
>> Define a platform driver to manage the remoteproc virtio device as
>> a platform devices.
>>
>> The platform device allows to pass rproc_vdev_data platform data to
>> specify properties that are stored in the rproc_vdev structure.
>>
>> Such approach will allow to preserve legacy remoteproc virtio device
>> creation but also to probe the device using device tree mechanism.
>>
>> remoteproc_virtio.c update:
>> - Add rproc_virtio_driver platform driver. The probe/remove ops replace
>> the rproc_rvdev_add_device/rproc_rvdev_remove_device functions.
>
> Function rproc_rvdev_remove_device() no longer exists.
>
>> - All reference to the rvdev->dev has been updated to rvdev-pdev->dev.
>> - rproc_rvdev_release is removed as associated to the rvdev device.
>> - The use of rvdev->kref counter is replaced by get/put_device on the
>> remoteproc virtio platform device.
>> - The vdev device no longer increments rproc device counter.
>> increment/decrement is done in rproc_virtio_probe/rproc_virtio_remove
>> function in charge of the vrings allocation/free.
>>
>> remoteproc_core.c update:
>> Migrate from the rvdev device to the rvdev platform device.
>> From this patch, when a vdev resource is found in the resource table
>> the remoteproc core register a platform device.
>>
>> Signed-off-by: Arnaud Pouliquen <[email protected]>
>> ---
>> Updates vs previous revision (based on Mathieu Poirier's comments):
>> - remoteteproc_virtio:
>> - remove debug print on probe and remove
>> - remove wriong comment on put_device(&rproc->dev), the get is
>> already commented
>> - remoteproc_core:
>> - fix dev_err() device parameter.
>> ---
>> drivers/remoteproc/remoteproc_core.c | 12 +-
>> drivers/remoteproc/remoteproc_internal.h | 3 -
>> drivers/remoteproc/remoteproc_virtio.c | 141 ++++++++++++-----------
>> include/linux/remoteproc.h | 6 +-
>> 4 files changed, 81 insertions(+), 81 deletions(-)
>>
>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>> index bd6d3f2decc6..81c4deef2895 100644
>> --- a/drivers/remoteproc/remoteproc_core.c
>> +++ b/drivers/remoteproc/remoteproc_core.c
>> @@ -478,6 +478,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
>> struct device *dev = &rproc->dev;
>> struct rproc_vdev *rvdev;
>> struct rproc_vdev_data rvdev_data;
>> + struct platform_device *pdev;
>>
>> /* make sure resource isn't truncated */
>> if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len >
>> @@ -506,9 +507,12 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
>> rvdev_data.rsc_offset = offset;
>> rvdev_data.rsc = rsc;
>>
>> - rvdev = rproc_rvdev_add_device(rproc, &rvdev_data);
>> - if (IS_ERR(rvdev))
>> - return PTR_ERR(rvdev);
>> + pdev = platform_device_register_data(dev, "rproc-virtio", rvdev_data.index, &rvdev_data,
>> + sizeof(rvdev_data));
>> + if (IS_ERR(pdev)) {
>> + dev_err(dev, "failed to create rproc-virtio device\n");
>> + return PTR_ERR(pdev);
>> + }
>>
>> return 0;
>> }
>> @@ -1248,7 +1252,7 @@ void rproc_resource_cleanup(struct rproc *rproc)
>>
>> /* clean up remote vdev entries */
>> list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node)
>> - kref_put(&rvdev->refcount, rproc_vdev_release);
>> + platform_device_unregister(rvdev->pdev);
>>
>> rproc_coredump_cleanup(rproc);
>> }
>> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
>> index 2c4358ad63ca..0608052d1120 100644
>> --- a/drivers/remoteproc/remoteproc_internal.h
>> +++ b/drivers/remoteproc/remoteproc_internal.h
>> @@ -45,10 +45,7 @@ int rproc_of_parse_firmware(struct device *dev, int index,
>> const char **fw_name);
>>
>> /* from remoteproc_virtio.c */
>> -struct rproc_vdev *rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data);
>> -void rproc_rvdev_remove_device(struct rproc_vdev *rvdev);
>
> Stale.
>
> I am done reviewing this set.

Thanks for the review!

Look to me reasonnable to wait conclusion concerning the thread:
rpmsg: virtio: Fix broken rpmsg_probe[1], before sending a new revision.
As this can impact this series

[1]https://lore.kernel.org/all/[email protected]/t/

Regards,
Arnaud

>
> Thanks,
> Mathieu
>
>> irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
>> -void rproc_vdev_release(struct kref *ref);
>>
>> /* from remoteproc_debugfs.c */
>> void rproc_remove_trace_file(struct dentry *tfile);
>> diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
>> index ccc95d4e42cf..06d2131dad11 100644
>> --- a/drivers/remoteproc/remoteproc_virtio.c
>> +++ b/drivers/remoteproc/remoteproc_virtio.c
>> @@ -13,6 +13,7 @@
>> #include <linux/dma-map-ops.h>
>> #include <linux/dma-mapping.h>
>> #include <linux/export.h>
>> +#include <linux/of_platform.h>
>> #include <linux/of_reserved_mem.h>
>> #include <linux/remoteproc.h>
>> #include <linux/virtio.h>
>> @@ -46,7 +47,11 @@ static int copy_dma_range_map(struct device *to, struct device *from)
>>
>> static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
>> {
>> - return container_of(vdev->dev.parent, struct rproc_vdev, dev);
>> + struct platform_device *pdev;
>> +
>> + pdev = container_of(vdev->dev.parent, struct platform_device, dev);
>> +
>> + return platform_get_drvdata(pdev);
>> }
>>
>> static struct rproc *vdev_to_rproc(struct virtio_device *vdev)
>> @@ -341,13 +346,10 @@ static void rproc_virtio_dev_release(struct device *dev)
>> {
>> struct virtio_device *vdev = dev_to_virtio(dev);
>> struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
>> - struct rproc *rproc = vdev_to_rproc(vdev);
>>
>> kfree(vdev);
>>
>> - kref_put(&rvdev->refcount, rproc_vdev_release);
>> -
>> - put_device(&rproc->dev);
>> + put_device(&rvdev->pdev->dev);
>> }
>>
>> /**
>> @@ -363,7 +365,7 @@ static void rproc_virtio_dev_release(struct device *dev)
>> static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
>> {
>> struct rproc *rproc = rvdev->rproc;
>> - struct device *dev = &rvdev->dev;
>> + struct device *dev = &rvdev->pdev->dev;
>> struct virtio_device *vdev;
>> struct rproc_mem_entry *mem;
>> int ret;
>> @@ -433,18 +435,8 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
>> vdev->dev.parent = dev;
>> vdev->dev.release = rproc_virtio_dev_release;
>>
>> - /*
>> - * We're indirectly making a non-temporary copy of the rproc pointer
>> - * here, because drivers probed with this vdev will indirectly
>> - * access the wrapping rproc.
>> - *
>> - * Therefore we must increment the rproc refcount here, and decrement
>> - * it _only_ when the vdev is released.
>> - */
>> - get_device(&rproc->dev);
>> -
>> /* Reference the vdev and vring allocations */
>> - kref_get(&rvdev->refcount);
>> + get_device(dev);
>>
>> ret = register_virtio_device(vdev);
>> if (ret) {
>> @@ -486,78 +478,57 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev)
>> static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
>> {
>> struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
>> + struct device *dev = &rvdev->pdev->dev;
>> int ret;
>>
>> - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev);
>> + ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev);
>> if (ret)
>> - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret);
>> + dev_warn(dev, "can't remove vdev child device: %d\n", ret);
>> }
>>
>> -/**
>> - * rproc_rvdev_release() - release the existence of a rvdev
>> - *
>> - * @dev: the subdevice's dev
>> - */
>> -static void rproc_rvdev_release(struct device *dev)
>> -{
>> - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
>> -
>> - of_reserved_mem_device_release(dev);
>> -
>> - kfree(rvdev);
>> -}
>> -
>> -struct rproc_vdev *
>> -rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
>> +static int rproc_virtio_probe(struct platform_device *pdev)
>> {
>> + struct device *dev = &pdev->dev;
>> + struct rproc_vdev_data *rvdev_data = dev->platform_data;
>> struct rproc_vdev *rvdev;
>> - struct fw_rsc_vdev *rsc = rvdev_data->rsc;
>> - char name[16];
>> + struct rproc *rproc = container_of(dev->parent, struct rproc, dev);
>> + struct fw_rsc_vdev *rsc;
>> int i, ret;
>>
>> - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
>> - if (!rvdev)
>> - return ERR_PTR(-ENOMEM);
>> + if (!rvdev_data)
>> + return -EINVAL;
>>
>> - kref_init(&rvdev->refcount);
>> + rvdev = devm_kzalloc(dev, sizeof(*rvdev), GFP_KERNEL);
>> + if (!rvdev)
>> + return -ENOMEM;
>>
>> rvdev->id = rvdev_data->id;
>> rvdev->rproc = rproc;
>> rvdev->index = rvdev_data->index;
>>
>> - /* Initialise vdev subdevice */
>> - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
>> - rvdev->dev.parent = &rproc->dev;
>> - rvdev->dev.release = rproc_rvdev_release;
>> - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
>> - dev_set_drvdata(&rvdev->dev, rvdev);
>> -
>> - ret = device_register(&rvdev->dev);
>> - if (ret) {
>> - put_device(&rvdev->dev);
>> - return ERR_PTR(ret);
>> - }
>> -
>> - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
>> + ret = copy_dma_range_map(dev, rproc->dev.parent);
>> if (ret)
>> - goto free_rvdev;
>> + return ret;
>>
>> /* Make device dma capable by inheriting from parent's capabilities */
>> - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
>> + set_dma_ops(dev, get_dma_ops(rproc->dev.parent));
>>
>> - ret = dma_coerce_mask_and_coherent(&rvdev->dev,
>> - dma_get_mask(rproc->dev.parent));
>> + ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent));
>> if (ret) {
>> - dev_warn(&rvdev->dev,
>> - "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
>> + dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
>> dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
>> }
>>
>> + platform_set_drvdata(pdev, rvdev);
>> + rvdev->pdev = pdev;
>> +
>> + rsc = rvdev_data->rsc;
>> +
>> /* parse the vrings */
>> for (i = 0; i < rsc->num_of_vrings; i++) {
>> ret = rproc_parse_vring(rvdev, rsc, i);
>> if (ret)
>> - goto free_rvdev;
>> + return ret;
>> }
>>
>> /* remember the resource offset*/
>> @@ -577,21 +548,30 @@ rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
>>
>> rproc_add_subdev(rproc, &rvdev->subdev);
>>
>> - return rvdev;
>> + /*
>> + * We're indirectly making a non-temporary copy of the rproc pointer
>> + * here, because the platform device or the vdev device will indirectly
>> + * access the wrapping rproc.
>> + *
>> + * Therefore we must increment the rproc refcount here, and decrement
>> + * it _only_ on platform remove.
>> + */
>> + get_device(&rproc->dev);
>> +
>> + return 0;
>>
>> unwind_vring_allocations:
>> for (i--; i >= 0; i--)
>> rproc_free_vring(&rvdev->vring[i]);
>> -free_rvdev:
>> - device_unregister(&rvdev->dev);
>> - return ERR_PTR(ret);
>> +
>> + return ret;
>> }
>>
>> -void rproc_vdev_release(struct kref *ref)
>> +static int rproc_virtio_remove(struct platform_device *pdev)
>> {
>> - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount);
>> - struct rproc_vring *rvring;
>> + struct rproc_vdev *rvdev = dev_get_drvdata(&pdev->dev);
>> struct rproc *rproc = rvdev->rproc;
>> + struct rproc_vring *rvring;
>> int id;
>>
>> for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) {
>> @@ -601,5 +581,26 @@ void rproc_vdev_release(struct kref *ref)
>>
>> rproc_remove_subdev(rproc, &rvdev->subdev);
>> rproc_remove_rvdev(rvdev);
>> - device_unregister(&rvdev->dev);
>> +
>> + of_reserved_mem_device_release(&pdev->dev);
>> +
>> + put_device(&rproc->dev);
>> +
>> + return 0;
>> }
>> +
>> +/* Platform driver */
>> +static const struct of_device_id rproc_virtio_match[] = {
>> + { .compatible = "virtio,rproc", },
>> + {},
>> +};
>> +
>> +static struct platform_driver rproc_virtio_driver = {
>> + .probe = rproc_virtio_probe,
>> + .remove = rproc_virtio_remove,
>> + .driver = {
>> + .name = "rproc-virtio",
>> + .of_match_table = rproc_virtio_match,
>> + },
>> +};
>> +builtin_platform_driver(rproc_virtio_driver);
>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>> index 7c943f0a2fc4..64b9809d0ec1 100644
>> --- a/include/linux/remoteproc.h
>> +++ b/include/linux/remoteproc.h
>> @@ -616,9 +616,8 @@ struct rproc_vring {
>>
>> /**
>> * struct rproc_vdev - remoteproc state for a supported virtio device
>> - * @refcount: reference counter for the vdev and vring allocations
>> * @subdev: handle for registering the vdev as a rproc subdevice
>> - * @dev: device struct used for reference count semantics
>> + * @pdev: remoteproc virtio platform device
>> * @id: virtio device id (as in virtio_ids.h)
>> * @node: list node
>> * @rproc: the rproc handle
>> @@ -627,10 +626,9 @@ struct rproc_vring {
>> * @index: vdev position versus other vdev declared in resource table
>> */
>> struct rproc_vdev {
>> - struct kref refcount;
>>
>> struct rproc_subdev subdev;
>> - struct device dev;
>> + struct platform_device *pdev;
>>
>> unsigned int id;
>> struct list_head node;
>> --
>> 2.24.3
>>