Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer Aquastream XT watercooling pump, which communicates
through a proprietary USB HID protocol. Implemented by Leonard Anderweit
[1] [2].
Coolant temp, fan IC and external temp sensor readings are available, along
with speed and voltage of both the pump and optionally connected fan.
It also exposes pump current.
Additionally, serial number and firmware version are exposed through
debugfs.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/46
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/49
Originally-from: Leonard Anderweit <[email protected]>
Signed-off-by: Aleksa Savic <[email protected]>
---
Documentation/hwmon/aquacomputer_d5next.rst | 5 +
drivers/hwmon/aquacomputer_d5next.c | 114 +++++++++++++++++++-
2 files changed, 118 insertions(+), 1 deletion(-)
diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
index c604d4becb8d..14b37851af0c 100644
--- a/Documentation/hwmon/aquacomputer_d5next.rst
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -12,6 +12,7 @@ Supported devices:
* Aquacomputer Octo fan controller
* Aquacomputer Quadro fan controller
* Aquacomputer High Flow Next sensor
+* Aquacomputer Aquastream XT watercooling pump
* Aquacomputer Aquastream Ultimate watercooling pump
* Aquacomputer Poweradjust 3 fan controller
@@ -56,6 +57,10 @@ The High Flow Next exposes +5V voltages, water quality, conductivity and flow re
A temperature sensor can be connected to it, in which case it provides its reading
and an estimation of the dissipated/absorbed power in the liquid cooling loop.
+The Aquastream XT pump exposes temperature readings for the coolant, external sensor
+and fan IC. It also exposes pump and fan speeds (in RPM), voltages, as well as pump
+current.
+
The Aquastream Ultimate pump exposes coolant temp and an external temp sensor, along
with speed, power, voltage and current of both the pump and optionally connected fan.
It also exposes pressure and flow speed readings.
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index 3bd35d833e69..a4fcd4ebf76c 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -29,12 +29,14 @@
#define USB_PRODUCT_ID_FARBWERK360 0xf010
#define USB_PRODUCT_ID_OCTO 0xf011
#define USB_PRODUCT_ID_HIGHFLOWNEXT 0xf012
+#define USB_PRODUCT_ID_AQUASTREAMXT 0xf0b6
#define USB_PRODUCT_ID_AQUASTREAMULT 0xf00b
#define USB_PRODUCT_ID_POWERADJUST3 0xf0bd
enum kinds {
d5next, farbwerk, farbwerk360, octo, quadro,
- highflownext, aquaero, poweradjust3, aquastreamult
+ highflownext, aquaero, poweradjust3, aquastreamult,
+ aquastreamxt
};
static const char *const aqc_device_names[] = {
@@ -44,6 +46,7 @@ static const char *const aqc_device_names[] = {
[octo] = "octo",
[quadro] = "quadro",
[highflownext] = "highflownext",
+ [aquastreamxt] = "aquastreamxt",
[aquaero] = "aquaero",
[aquastreamult] = "aquastreamultimate",
[poweradjust3] = "poweradjust3"
@@ -77,6 +80,8 @@ static u8 aquaero_secondary_ctrl_report[] = {
};
/* Report IDs for legacy devices */
+#define AQUASTREAMXT_STATUS_REPORT_ID 0x04
+
#define POWERADJUST3_STATUS_REPORT_ID 0x03
/* Data types for reading and writing control reports */
@@ -231,6 +236,24 @@ static u16 quadro_ctrl_fan_offsets[] = { 0x37, 0x8c, 0xe1, 0x136 }; /* Fan speed
#define HIGHFLOWNEXT_5V_VOLTAGE 97
#define HIGHFLOWNEXT_5V_VOLTAGE_USB 99
+/* Specs of the Aquastream XT pump */
+#define AQUASTREAMXT_SERIAL_START 0x3a
+#define AQUASTREAMXT_FIRMWARE_VERSION 0x32
+#define AQUASTREAMXT_NUM_FANS 2
+#define AQUASTREAMXT_NUM_SENSORS 3
+#define AQUASTREAMXT_FAN_STOPPED 0x4
+#define AQUASTREAMXT_PUMP_CONVERSION_CONST 45000000
+#define AQUASTREAMXT_FAN_CONVERSION_CONST 5646000
+#define AQUASTREAMXT_SENSOR_REPORT_SIZE 0x42
+
+/* Sensor report offsets and info for Aquastream XT */
+#define AQUASTREAMXT_SENSOR_START 0xd
+#define AQUASTREAMXT_FAN_VOLTAGE_OFFSET 0x7
+#define AQUASTREAMXT_FAN_STATUS_OFFSET 0x1d
+#define AQUASTREAMXT_PUMP_VOLTAGE_OFFSET 0x9
+#define AQUASTREAMXT_PUMP_CURR_OFFSET 0xb
+static u16 aquastreamxt_sensor_fan_offsets[] = { 0x13, 0x1b };
+
/* Specs of the Poweradjust 3 */
#define POWERADJUST3_NUM_SENSORS 1
#define POWERADJUST3_SENSOR_REPORT_SIZE 0x32
@@ -388,6 +411,13 @@ static const char *const label_highflownext_voltage[] = {
"+5V USB voltage"
};
+/* Labels for Aquastream XT */
+static const char *const label_aquastreamxt_temp_sensors[] = {
+ "Fan IC temp",
+ "External sensor",
+ "Coolant temp"
+};
+
/* Labels for Aquastream Ultimate */
static const char *const label_aquastreamult_temp[] = {
"Coolant temp",
@@ -531,6 +561,22 @@ static int aqc_pwm_to_percent(long val)
return DIV_ROUND_CLOSEST(val * 100 * 100, 255);
}
+/* Converts raw value for Aquastream XT pump speed to RPM */
+static int aqc_aquastreamxt_convert_pump_rpm(u16 val)
+{
+ if (val > 0)
+ return DIV_ROUND_CLOSEST(AQUASTREAMXT_PUMP_CONVERSION_CONST, val);
+ return 0;
+}
+
+/* Converts raw value for Aquastream XT fan speed to RPM */
+static int aqc_aquastreamxt_convert_fan_rpm(u16 val)
+{
+ if (val > 0)
+ return DIV_ROUND_CLOSEST(AQUASTREAMXT_FAN_CONVERSION_CONST, val);
+ return 0;
+}
+
/* Expects the mutex to be locked */
static int aqc_get_ctrl_data(struct aqc_data *priv)
{
@@ -734,6 +780,8 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
if (channel == 0)
return 0444;
break;
+ case aquastreamxt:
+ break;
default:
if (channel < priv->num_fans)
return 0444;
@@ -747,6 +795,11 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
if (channel < 2)
return 0444;
break;
+ case aquastreamxt:
+ /* Special case to support pump current */
+ if (channel == 0)
+ return 0444;
+ break;
default:
if (channel < priv->num_fans)
return 0444;
@@ -799,6 +852,43 @@ static int aqc_legacy_read(struct aqc_data *priv)
priv->temp_input[i] = sensor_value * 10;
}
+ /* Special-case sensor readings */
+ switch (priv->kind) {
+ case aquastreamxt:
+ /* Info provided with every report */
+ priv->serial_number[0] = get_unaligned_le16(priv->buffer +
+ priv->serial_number_start_offset);
+ priv->firmware_version =
+ get_unaligned_le16(priv->buffer + priv->firmware_version_offset);
+
+ /* Read pump speed in RPM */
+ sensor_value = get_unaligned_le16(priv->buffer + priv->fan_sensor_offsets[0]);
+ priv->speed_input[0] = aqc_aquastreamxt_convert_pump_rpm(sensor_value);
+
+ /* Read fan speed in RPM, if available */
+ sensor_value = get_unaligned_le16(priv->buffer + AQUASTREAMXT_FAN_STATUS_OFFSET);
+ if (sensor_value == AQUASTREAMXT_FAN_STOPPED) {
+ priv->speed_input[1] = 0;
+ } else {
+ sensor_value =
+ get_unaligned_le16(priv->buffer + priv->fan_sensor_offsets[1]);
+ priv->speed_input[1] = aqc_aquastreamxt_convert_fan_rpm(sensor_value);
+ }
+
+ /* Calculation derived from linear regression */
+ sensor_value = get_unaligned_le16(priv->buffer + AQUASTREAMXT_PUMP_CURR_OFFSET);
+ priv->current_input[0] = DIV_ROUND_CLOSEST(sensor_value * 176, 100) - 52;
+
+ sensor_value = get_unaligned_le16(priv->buffer + AQUASTREAMXT_PUMP_VOLTAGE_OFFSET);
+ priv->voltage_input[0] = DIV_ROUND_CLOSEST(sensor_value * 1000, 61);
+
+ sensor_value = get_unaligned_le16(priv->buffer + AQUASTREAMXT_FAN_VOLTAGE_OFFSET);
+ priv->voltage_input[1] = DIV_ROUND_CLOSEST(sensor_value * 1000, 63);
+ break;
+ default:
+ break;
+ }
+
priv->updated = jiffies;
unlock_and_return:
@@ -1481,6 +1571,21 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->power_label = label_highflownext_power;
priv->voltage_label = label_highflownext_voltage;
break;
+ case USB_PRODUCT_ID_AQUASTREAMXT:
+ priv->kind = aquastreamxt;
+
+ priv->num_fans = AQUASTREAMXT_NUM_FANS;
+ priv->fan_sensor_offsets = aquastreamxt_sensor_fan_offsets;
+
+ priv->num_temp_sensors = AQUASTREAMXT_NUM_SENSORS;
+ priv->temp_sensor_start_offset = AQUASTREAMXT_SENSOR_START;
+ priv->buffer_size = AQUASTREAMXT_SENSOR_REPORT_SIZE;
+
+ priv->temp_label = label_aquastreamxt_temp_sensors;
+ priv->speed_label = label_d5next_speeds;
+ priv->voltage_label = label_d5next_voltages;
+ priv->current_label = label_d5next_current;
+ break;
case USB_PRODUCT_ID_AQUASTREAMULT:
priv->kind = aquastreamult;
@@ -1526,6 +1631,12 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
case poweradjust3:
priv->status_report_id = POWERADJUST3_STATUS_REPORT_ID;
break;
+ case aquastreamxt:
+ priv->serial_number_start_offset = AQUASTREAMXT_SERIAL_START;
+ priv->firmware_version_offset = AQUASTREAMXT_FIRMWARE_VERSION;
+
+ priv->status_report_id = AQUASTREAMXT_STATUS_REPORT_ID;
+ break;
default:
priv->serial_number_start_offset = AQC_SERIAL_START;
priv->firmware_version_offset = AQC_FIRMWARE_VERSION;
@@ -1596,6 +1707,7 @@ static const struct hid_device_id aqc_table[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_HIGHFLOWNEXT) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_AQUASTREAMXT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_AQUASTREAMULT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_POWERADJUST3) },
{ }
--
2.39.2
On Sun, Apr 16, 2023 at 08:17:01PM +0200, Aleksa Savic wrote:
> Extend aquacomputer_d5next driver to expose various hardware sensors of the
> Aquacomputer Aquastream XT watercooling pump, which communicates
> through a proprietary USB HID protocol. Implemented by Leonard Anderweit
> [1] [2].
>
> Coolant temp, fan IC and external temp sensor readings are available, along
> with speed and voltage of both the pump and optionally connected fan.
> It also exposes pump current.
>
> Additionally, serial number and firmware version are exposed through
> debugfs.
>
> [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/46
> [2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/49
>
> Originally-from: Leonard Anderweit <[email protected]>
> Signed-off-by: Aleksa Savic <[email protected]>
Applied.
Thanks,
Guenter