SMI SM3350 UFS-USB bridge controller cannot handle REQUEST SENSE command
with long sense (96-bytes) well, and will even trap the controller into
a state that refuses to do read/write command.
Currently Linux uncondintionally set US_FL_SANE_SENSE for devices
claiming SPC3+, which makes simply add US_FL_BAD_SENSE for SM3350 fail
(as it claims SPC4).
Fix this conflicting quirk issue, and add the quirk for SM3350.
Icenowy Zheng (2):
USB: storage: don't insert sane sense for SPC3+ when bad sense
specified
USB: storage: add quirk for SMI SM3350
drivers/usb/storage/scsiglue.c | 3 ++-
drivers/usb/storage/unusual_devs.h | 12 ++++++++++++
2 files changed, 14 insertions(+), 1 deletion(-)
--
2.18.1
在 2018-12-27四的 22:34 +0800,Icenowy Zheng写道:
> The SMI SM3350 USB-UFS bridge controller cannot handle long sense
> request
> correctly and will make the chip refuse to do read/write when
> requested
> long sense.
>
> Add a bad sense quirk for it.
>
> Signed-off-by: Icenowy Zheng <[email protected]>
> ---
I forgot to:
Cc: [email protected]
> drivers/usb/storage/unusual_devs.h | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/usb/storage/unusual_devs.h
> b/drivers/usb/storage/unusual_devs.h
> index f7f83b21dc74..ea0d27a94afe 100644
> --- a/drivers/usb/storage/unusual_devs.h
> +++ b/drivers/usb/storage/unusual_devs.h
> @@ -1265,6 +1265,18 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
> USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> US_FL_FIX_CAPACITY ),
>
> +/*
> + * Reported by Icenowy Zheng <[email protected]>
> + * The SMI SM3350 USB-UFS bridge controller will enter a wrong state
> + * that do not process read/write command if a long sense is
> requested,
> + * so force to use 18-byte sense.
> + */
> +UNUSUAL_DEV( 0x090c, 0x3350, 0x0000, 0xffff,
> + "SMI",
> + "SM3350 UFS-to-USB-Mass-Storage bridge",
> + USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> + US_FL_BAD_SENSE ),
> +
> /*
> * Reported by Paul Hartman <[email protected]>
> * This card reader returns "Illegal Request, Logical Block Address
Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).
Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.
Signed-off-by: Icenowy Zheng <[email protected]>
---
drivers/usb/storage/scsiglue.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index fde2e71a6ade..699fe9557127 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -236,7 +236,8 @@ static int slave_configure(struct scsi_device *sdev)
sdev->try_rc_10_first = 1;
/* assume SPC3 or latter devices support sense size > 18 */
- if (sdev->scsi_level > SCSI_SPC_2)
+ if (sdev->scsi_level > SCSI_SPC_2 &&
+ !(us->fflags & US_FL_BAD_SENSE))
us->fflags |= US_FL_SANE_SENSE;
/*
--
2.18.1
The SMI SM3350 USB-UFS bridge controller cannot handle long sense request
correctly and will make the chip refuse to do read/write when requested
long sense.
Add a bad sense quirk for it.
Signed-off-by: Icenowy Zheng <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index f7f83b21dc74..ea0d27a94afe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1265,6 +1265,18 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/*
+ * Reported by Icenowy Zheng <[email protected]>
+ * The SMI SM3350 USB-UFS bridge controller will enter a wrong state
+ * that do not process read/write command if a long sense is requested,
+ * so force to use 18-byte sense.
+ */
+UNUSUAL_DEV( 0x090c, 0x3350, 0x0000, 0xffff,
+ "SMI",
+ "SM3350 UFS-to-USB-Mass-Storage bridge",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BAD_SENSE ),
+
/*
* Reported by Paul Hartman <[email protected]>
* This card reader returns "Illegal Request, Logical Block Address
--
2.18.1
在 2018-12-27四的 22:34 +0800,Icenowy Zheng写道:
> Currently the code will set US_FL_SANE_SENSE flag unconditionally if
> device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
> prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
> which claims SPC4, will show strange behavior with 96-byte sense
> (put the chip into a wrong state that cannot read/write anything).
>
> Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE
> on
> SPC4+ devices.
>
> Signed-off-by: Icenowy Zheng <[email protected]>
> ---
I forgot to:
Cc: [email protected]
> drivers/usb/storage/scsiglue.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/storage/scsiglue.c
> b/drivers/usb/storage/scsiglue.c
> index fde2e71a6ade..699fe9557127 100644
> --- a/drivers/usb/storage/scsiglue.c
> +++ b/drivers/usb/storage/scsiglue.c
> @@ -236,7 +236,8 @@ static int slave_configure(struct scsi_device
> *sdev)
> sdev->try_rc_10_first = 1;
>
> /* assume SPC3 or latter devices support sense size >
> 18 */
> - if (sdev->scsi_level > SCSI_SPC_2)
> + if (sdev->scsi_level > SCSI_SPC_2 &&
> + !(us->fflags & US_FL_BAD_SENSE))
> us->fflags |= US_FL_SANE_SENSE;
>
> /*
On Thu, 27 Dec 2018, Icenowy Zheng wrote:
> Currently the code will set US_FL_SANE_SENSE flag unconditionally if
> device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
> prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
> which claims SPC4, will show strange behavior with 96-byte sense
> (put the chip into a wrong state that cannot read/write anything).
>
> Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
> SPC4+ devices.
>
> Signed-off-by: Icenowy Zheng <[email protected]>
> ---
> drivers/usb/storage/scsiglue.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
> index fde2e71a6ade..699fe9557127 100644
> --- a/drivers/usb/storage/scsiglue.c
> +++ b/drivers/usb/storage/scsiglue.c
> @@ -236,7 +236,8 @@ static int slave_configure(struct scsi_device *sdev)
> sdev->try_rc_10_first = 1;
>
> /* assume SPC3 or latter devices support sense size > 18 */
> - if (sdev->scsi_level > SCSI_SPC_2)
> + if (sdev->scsi_level > SCSI_SPC_2 &&
> + !(us->fflags & US_FL_BAD_SENSE))
> us->fflags |= US_FL_SANE_SENSE;
Please update the comment so that it matches the new code.
Alan Stern